Analysis and Design of Time-Delay Impulsive Systems Subject to Actuator Saturation

This paper investigates the exponential stability and performance analysis of nonlinear time-delay impulsive systems subject to actuator saturation. When continuous dynamics is unstable, under some conditions, it is shown that the system can be stabilized by a class of saturated delayed-impulses regardless of the length of input delays. Conversely, when the system is originally stable, it is shown that under some conditions, the system is robust with respect to sufficient small delayed-impulses. Moreover, the design problem of the controller with the goal of obtaining a maximized estimate of the domain of attraction is formulated via a convex optimization problem. Three examples are provided to demonstrate the validity of the main results.

PCA-LSTM:An Impulsive Ground-Shaking Identification Method Based on Combined Deep Learning

Near-fault impulsive ground-shaking is highly destructive to engineering structures,so its accurate identification ground-shaking is a top priority in the engineering field.However,due to the lack of a comprehensive consideration of the ground-shaking characteristics in traditional methods,the generalization and accuracy of the identification process are low.To address these problems,an impulsive ground-shaking identification method combined with deep learning named PCA-LSTM is proposed.Firstly,ground-shaking characteristics were analyzed and groundshaking the data was annotated using Baker’smethod.Secondly,the Principal Component Analysis(PCA)method was used to extract the most relevant features related to impulsive ground-shaking.Thirdly,a Long Short-Term Memory network(LSTM)was constructed,and the extracted features were used as the input for training.Finally,the identification results for the Artificial Neural Network(ANN),Convolutional Neural Network(CNN),LSTM,and PCA-LSTMmodels were compared and analyzed.The experimental results showed that the proposed method improved the accuracy of pulsed ground-shaking identification by>8.358%and identification speed by>26.168%,compared to other benchmark models ground-shaking.

Lyapunov Conditions for Finite-Time Input-to-State Stability of Impulsive Switched Systems

Dear Editor,This letter studies finite-time input-to-state stability(FTISS)for impulsive switched systems.A set of Lyapunov-based conditions are established for guaranteeing FTISS property.When constituent modes governing continuous dynamics are FTISS and discrete dynamics involving impulses are destabilizing,the FTISS can be retained if impulsive-switching signals satisfy an average dwell-time(ADT)condition.

Modeling Near-Field Impulsive Waves Generated by Deformable Landslide Using the HBP Model Based on the SPH Method

Landslide-generated impulsive waves(LGWs)in reservoir areas can seriously threaten waterway safety as well as hu-man life and properties around the two side slopes.The risk reduction and mitigation of such a hazard require the accurate prediction of near-field wave characteristics,such as wave amplitude and run-up.However,near-field LGW involves complicated fluid-solid interactions.Furthermore,the wave characteristics are closely related to various aspects,including the geometry and physical features of the slide,river,and body of water.However,the empirical or analytical methods used for rough estimation cannot derive accurate results,especially for deformable landslides,due to their significant geometry changes during the sliding process.In this study,the near-field waves generated by deformable landslides were simulated by smoothed particle hydrodynamics(SPH)based on multi-phase flow.The deformable landslides were generalized as a kind of viscous flow by adopting the Herschel-Bulkley-Papanastasiou(HBP)-based nonNewtonian rheology model.The HBP model is capable of producing deformable landslide dynamics even though the high-speed sliding process is involved.In this study,an idealized experiment case originating from Lituya LGW and a practical case of Gongjiafang LGW were reproduced for verification and demonstration.The simulation results of both cases show satisfactory consistency with the experiment/investigation data in terms of landslide movement and near-field impulsive wave characteristics,thus indicating the applicability and accuracy of the proposed method.Finally,the effects of the HBP model’s rheological parameters on the landslide dynamics and near-field wave characteristics are discussed,providing a parameter calibration method along with sug-gestions for further applications.

Localization for mixed near-field and far-field sources under impulsive noise

In order to solve the problem that the performance of traditional localization methods for mixed near-field sources(NFSs)and far-field sources(FFSs)degrades under impulsive noise,a robust and novel localization method is proposed.After eliminating the impacts of impulsive noise by the weighted out-lier filter,the direction of arrivals(DOAs)of FFSs can be estimated by multiple signal classification(MUSIC)spectral peaks search.Based on the DOAs information of FFSs,the separation of mixed sources can be performed.Finally,the estimation of localizing parameters of NFSs can avoid two-dimension spectral peaks search by decomposing steering vectors.The Cramer-Rao bounds(CRB)for the unbiased estimations of DOA and range under impulsive noise have been drawn.Simulation experiments verify that the proposed method has advantages in probability of successful estimation(PSE)and root mean square error(RMSE)compared with existing localization methods.It can be concluded that the proposed method is effective and reliable in the environment with low generalized signal to noise ratio(GSNR),few snapshots,and strong impulse.

Numerical Study of the Vibrations of Beams with Variable Stiffness under Impulsive or Harmonic Loading

The behavior of beams with variable stiffness subjected to the action of variable loadings (impulse or harmonic) is analyzed in this paper using the successive approximation method. This successive approximation method is a technique for numerical integration of partial differential equations involving both the space and time, with well-known initial conditions on time and boundary conditions on the space. This technique, although having been applied to beams with constant stiffness, is new for the case of beams with variable stiffness, and it aims to use a quadratic parabola (in time) to approximate the solutions of the differential equations of dynamics. The spatial part is studied using the successive approximation method of the partial differential equations obtained, in order to transform them into a system of time-dependent ordinary differential equations. Thus, the integration algorithm using this technique is established and applied to examples of beams with variable stiffness, under variable loading, and with the different cases of supports chosen in the literature. We have thus calculated the cases of beams with constant or variable rigidity with articulated or embedded supports, subjected to the action of an instantaneous impulse and harmonic loads distributed over its entire length. In order to justify the robustness of the successive approximation method considered in this work, an example of an articulated beam with constant stiffness subjected to a distributed harmonic load was calculated analytically, and the results obtained compared to those found numerically for various steps (spatial h and temporal τ ¯ ) of calculus, and the difference between the values obtained by the two methods was small. For example for ( h=1/8 , τ ¯ =1/ 64 ), the difference between these values is 17%.

Sliding Mode Control for Recurrent Neural Networks With Time-Varying Delays and Impulsive Effects

Dear Editor,This letter studies the problem of sliding mode control(SMC)design for recurrent neural networks(RNNs)with impulsive disturbances and time-varying transmission delays.To this end,an appropriate integral sliding surface function and SMC law are adopted for use under impulsive disturbances and time-varying delays.

Novel Criteria on Finite-Time Stability of Impulsive Stochastic Nonlinear Systems

Dear Editor,This letter considers the finite-time stability(FTS)problem of generalized impulsive stochastic nonlinear systems(ISNS).By employing the stochastic Lyapunov and impulsive control approach,some novel criteria on FTS are presented,where both situations of stabilizing and destabilizing impulses are considered.Furthermore,new impulse-dependent estimation strategies of stochastic settling time(SST)are proposed.

Impulsive control of nonlinear systems with time-varying delays

A whole impulsive control scheme of nonlinear systems with time-varying delays, which is an extension for impulsive control of nonlinear systems without time delay, is presented in this paper. Utilizing the Lyapunov functions and the impulsive-type comparison principles, we establish a series of different conditions under which impulsively controlled nonlinear systems with time-varying delays are asymptotically stable. Then we estimate upper bounds of impulse interval and time-varying delays for asymptotically stable control. Finally a numerical example is given to illustrate the effectiveness of the method.

An improved impulsive control approach to nonlinear systems with time-varying delays

A scheme for the impulsive control of nonlinear systems with time-varying delays is investigated in this paper. Based on the Lyapunov-like stability theorem for impulsive functional differential equations （FDEs）, some sufficient conditions are presented to guarantee the uniform asymptotic stability of impulsively controlled nonlinear systems with time-varying delays. These conditions are more effective and less conservative than those obtained. Finally, two numerical examples are provided to demonstrate the effectiveness of the proposed method.

Fixed-Time and Predefined-Time Stability of Impulsive Systems

Dear Editor,This letter establishes several criteria for fixed-time stability and predefined-time stability of impulsive systems.First,sufficient conditions for fixed-time stability of impulsive systems are presented to treat the destabilizing impulses and hybrid impulses involving multiple jump maps by fixed-time control without linear feedback regulation.It determines the robustness of nonlinear systems against impulsive disturbance which has destabilizing and hybrid effect to dynamics.

Finite-time Prescribed Performance Time-Varying Formation Control for Second-Order Multi-Agent Systems With Non-Strict Feedback Based on a Neural Network Observer

This paper studies the problem of time-varying formation control with finite-time prescribed performance for nonstrict feedback second-order multi-agent systems with unmeasured states and unknown nonlinearities.To eliminate nonlinearities,neural networks are applied to approximate the inherent dynamics of the system.In addition,due to the limitations of the actual working conditions,each follower agent can only obtain the locally measurable partial state information of the leader agent.To address this problem,a neural network state observer based on the leader state information is designed.Then,a finite-time prescribed performance adaptive output feedback control strategy is proposed by restricting the sliding mode surface to a prescribed region,which ensures that the closed-loop system has practical finite-time stability and that formation errors of the multi-agent systems converge to the prescribed performance bound in finite time.Finally,a numerical simulation is provided to demonstrate the practicality and effectiveness of the developed algorithm.

Impulsive Noise Cancellation in OFDM System Using Low Density Parity Check

An effective communication application necessitates the cancellation of Impulsive Noise(IN)from Orthogonal Frequency Division Multiplexing(OFDM),which is widely used for wireless applications due to its higher data rate and greater spectral efficiency.The OFDM system is typically corrupted by Impulsive Noise,which is an unwanted short-duration pulse with random amplitude and duration.Impulsive noise is created by humans and has non-Gaussian characteristics,causing problems in communication systems such as high capacity loss and poor error rate performance.Several techniques have been introduced in the literature to solve this type of problem,but they still have many issues that affect the performance of the presented methods.As a result,developing a new hybridization-based method is critical for accurate method performance.In this paper,we present a hybrid of a state space adaptive filter and an information coding technique for cancelling impulsive noise from OFDM.The proposed method is also compared to Least Mean Square(LMS),Normalized Least Mean Square(NLMS),and Recursive Least Square(RLS)adaptive filters.It has also been tested using the binary phase-shift keyed(BPSK),four quadrature amplitude modulation(QAM),sixteen QAM,and thirty-two QAM modulation techniques.Bit error Rate(BER)simulations are used to evaluate system performance,and improved performance is obtained.Furthermore,the proposed method is more effective than recent methods.

On the partial stability of nonlinear impulsive Caputo fractional systems

In this work,stability with respect to part of the variables of nonlinear impulsive Caputo fractional differential equations is investigated.Some effective sufficient conditions of stability,uniform stability,asymptotic uniform stability and Mittag Leffler stability.The approach presented is based on the specially introduced piecewise continuous Lyapunov functions.Furthermore,some numerical examples are given to show the effectiveness of our obtained theoretical results.

Robust reliable control for a class of time-varying uncertain impulsive systems

The problem of robust and reliable control design for linear uncertain impulsive systems with both timevarying norm-bounded parameter uncertainty and actuator failures was studied. The actuators are classified into two groups. One set of actuators susceptible to failures is possible to fail, the other set of actuators robust to failures is assumed never to fail. The outputs of the actuator failures are regarded as zero. The purpose is to design the state feedback controller such that, for all admissible uncertainties as well as actuator failures occurring among a prespecified subset of actuators, the plant remains asymptotically stable. A modified algebraic Riccati equation approach was developed to solve the problem addressed and a robust reliable control law was obtained. An numerical example was also offered to prove the effectiveness of the proposed method.

Delay-dependent exponential stability of impulsive stochastic systems with time-varying delay

The problem of delay-dependent exponential stability is investigated for impulsive stochastic systems with time-varying delay. Although the exponential stability of impulsive stochastic delay systems has been discussed by several authors, few works have been done on delay-dependent exponential stability of impulsive stochastic delay systems. Firstly, the Lyapunov-Krasovskii functional method combing the free-weighting matrix approach is applied to investigate this problem. Some delay-dependent mean square exponential stability criteria are derived in terms of linear matrix inequalities. In particular, the estimate of the exponential convergence rate is also provided, which depends on system parameters and impulsive effects. The obtained results show that the system will stable if the impulses＇ frequency and amplitude are suitably related to the increase or decrease of the continuous flows, and impulses may be used as controllers to stabilize the underlying stochastic system. Numerical examples are given to show the effectiveness of the results.

Complementary-Label Adversarial Domain Adaptation Fault Diagnosis Network under Time-Varying Rotational Speed and Weakly-Supervised Conditions

Recent research in cross-domain intelligence fault diagnosis of machinery still has some problems,such as relatively ideal speed conditions and sample conditions.In engineering practice,the rotational speed of the machine is often transient and time-varying,which makes the sample annotation increasingly expensive.Meanwhile,the number of samples collected from different health states is often unbalanced.To deal with the above challenges,a complementary-label(CL)adversarial domain adaptation fault diagnosis network(CLADAN)is proposed under time-varying rotational speed and weakly-supervised conditions.In the weakly supervised learning condition,machine prior information is used for sample annotation via cost-friendly complementary label learning.A diagnosticmodel learning strategywith discretized category probabilities is designed to avoidmulti-peak distribution of prediction results.In adversarial training process,we developed virtual adversarial regularization(VAR)strategy,which further enhances the robustness of the model by adding adversarial perturbations in the target domain.Comparative experiments on two case studies validated the superior performance of the proposed method.

Global exponentially stability for time-delay and time-varying measure large scale systems with impulsive effects

The global exponentially stability was studied for time-delay and time-varying measure large scale systems with impulsive effects. Firstly, the concepts are drawn for the functional category. Secondly, some sufficient conditions of the uniformly stability and the global exponentially stability are given for the above systems through defining a Lyapunov function of the weighting sum of the variable absolute by using the Lyapunov function method and the comparison principle. At the same time, the new conclusion of stability of these systems is more universal and contains the existing results. Finally, an example is given to illustrate the feasibility and validity of the obtained results.

Two-dimensional particle-in-cell modeling of blow-off impulse by X-ray irradiation

Space objects such as spacecraft or missiles may be exposed to intense X-rays in outer space,leading to severe damage.The reinforcement of these objects to reduce the damage caused by X-ray irradiation is a significant concern.The blow-off impulse(BOI)is a crucial physical quantity for investigating material damage induced by X-ray irradiation.However,the accurate calculation of BOI is challenging,particularly for large deformations of materials with complex configurations.In this study,we develop a novel two-dimensional particle-in-cell code,Xablation2D,to calculate BOIs under far-field X-ray irradiation.This significantly reduces the dependence of the numerical simulation on the grid shape.The reliability of this code is verified by simulation results from open-source codes,and the calculated BOIs are consistent with the experimental and analytical results.

On the Application of Mixed Models of Probability and Convex Set for Time-Variant Reliability Analysis

In time-variant reliability problems,there are a lot of uncertain variables from different sources.Therefore,it is important to consider these uncertainties in engineering.In addition,time-variant reliability problems typically involve a complexmultilevel nested optimization problem,which can result in an enormous amount of computation.To this end,this paper studies the time-variant reliability evaluation of structures with stochastic and bounded uncertainties using a mixed probability and convex set model.In this method,the stochastic process of a limit-state function with mixed uncertain parameters is first discretized and then converted into a timeindependent reliability problem.Further,to solve the double nested optimization problem in hybrid reliability calculation,an efficient iterative scheme is designed in standard uncertainty space to determine the most probable point(MPP).The limit state function is linearized at these points,and an innovative random variable is defined to solve the equivalent static reliability analysis model.The effectiveness of the proposed method is verified by two benchmark numerical examples and a practical engineering problem.