EXPERIMENTAL STUDY ON COHERENT VORTEX STRUCTURES IN DIFFERENTIALLY ROTATING QUASI TWO DIMENSIONAL ZONAL FLOW

An experimental system for forming a rotating paraboloid shaped shallow water with a free surface was conducted to study coherent vortex structures in a differentially rotating quasi two dimensional zonal flow.Flow visualization and laser light scattering techniques were used to obtain the information of spatial flow patterns.Experimental results show that the coexistence of Coriolis effect and strong shear in latitudinal zones may lead to formation of coherent vortices.Power spectra analysis and photographs which were taken in a reference frame rotating with the observed vortices also justified the emergence,drift and evolution of persistent vortices on the large scale.Locked vortex state manifests the cyclone and anticyclone asymmetry.

VISUALIZATION OF FLOW THROUGH A ROTATING U-BEND DUCT

The flow through a rotating U bend duct is investigated by means of visualization. The U bend duct has a cross section of 50 mm×50 mm and a ratio of bend mean radius R c to hydraulic diameter of the duct D of 0.65. The rotation axis is parallel with the bend axis. Three cases with rotation number of Ro=-0.2, 0 and 0.2, respectively, are studied at a Reynolds number of 100 000. The results show that the combined effect of rotation and bend curvature strongly influences the flow field, especially in the downstream region of the bend. The evident difference among the flow patterns with different rotation number shows that the secondary flow induced by Coriolis force takes an important role in determining the flow structure.

Laminar Flow in the Gap between Two Rotating Parallel Frictional Plates in Hydro-viscous Drive

The velocity, pressure and temperature distributions of the flow in the gap between hydro-viscous drive friction disks are the key parameters in the design of hydro-viscous drive and angular velocity controller. In the previous works dealing with the flow in the gap between disks in hydro-viscous drive, few authors considered the effect of Coriolis force on the flow. The object of this work is to investigate the flow with consideration of the effects of centrifugal force, Coriolis force and variable viscosity. A simplified mathematical model based on steady and laminar flow is presented. An approximate solution to the simplified mathematical model is obtained by using the iteration method assuming that the fluid viscosity remains constant. Then the model considering the effect of variable viscosity is solved by means of computational fluid dynamics code FLUENT. Numerical results of the flow are obtained. It is found that radial velocity profile diverges from the ideal parabolic curve due to inertial forces and tangential velocity profile is nonlinear due to Coriolis force, and pressure has two possible solution branches. In addition, it is found that variable viscosity plays an important role on pressure profiles which are significantly different from those of fluid with constant viscosity. The experimental device designed for this work consists of two disks, and one of them is fixed. Experimental pressure and temperature of the flow within test rig are obtained. It is shown that the trend of numerical results is in agreement with that of experimental ones. The research provides a theoretical foundation for hydro-viscous drive design.

Effects of Airflow Field on Droplets Diameter inside the Corrugated Packing of a Rotating Packed Bed

Rotating packing bed(RPB) has a better mixing performance than traditional mixers and shows potential application in the petroleum industry. However, acquisition of information about the mixing process directly through experiments is difficult because of the compact structure and complex multiphase flow pattern in RPB. To study the mixing characteristic, Fluent, the computational fluid dynamics(CFD) software, was used to explore the effect of airflow field on droplet diameter. For conducting calculations, the gas-liquid two-phase flow inside the packing was simulated with the RNG k-ε turbulence model and the Lagrange Discrete Phase Model(DPM), respectively. The numerical calculation results showed that coalescence and breakup of droplets can take place in the gas phase flow inside the packing and can be strengthened with increased rotating speed, thereby leading to the enlargement of the average diameter.

Rotating electroosmotic flow of an Eyring fluid

A perturbation analysis is presented in this paper for the electroosmotic (EO) flow of an Eyring fluid through a wide rectangular microchannel that rotates about an axis perpendicular to its own. Mildly shear-thinning rheology is assumed such that at the leading order the problem reduces to that of Newtonian EO flow in a rotating channel, while the shear thinning effect shows up in a higher-order problem. Using the relaxation time as the small ordering parameter, analytical solutions are deduced for the leading- as well as first-order problems in terms of the dimensionless Debye and rotation parameters. The velocity profiles of the Ekman-electric double layer (EDL) layer, which is the boundary layer that arises when the Ekman layer and the EDL are comparably thin, are also deduced for an Eyring fluid. It is shown that the present perturbation model can yield results that are close to the exact solutions even when the ordering parameter is as large as order unity. By this order of the relaxation time parameter, the enhancing effect on the rotating EO flow due to shear-thinning Eyring rheology can be significant.

Numerical Simulation of High Speed Rotating Waterjet Flow Field in a Semi Enclosed Vacuum Chamber

In this paper,a three dimension model is built according to real surface cleaner in airport runway rubber mark cleaning vehicle and numerical simulation of this model is carried out using Ansys Fluent software.After comparison and analysis of the flow fields between high speed rotating waterjet and static waterjet formerly studied by other researchers,the influences of different standoff distances from nozzle outlet to runway surface and rotation speeds on rubber mark cleaning effect are simulated and analyzed.Results show the optimal operation parameters for the simulated model and quantitative advices are given for design,manufacture and operation of the airport runway rubber mark cleaning vehicle.

Numerical study on three-dimensional flow field of continuously rotating detonation in a toroidal chamber

Gaseous detonation propagating in a toroidal chamber was numerically studied for hydrogen/oxygen/nitrogen mixtures. The numerical method used is based on the three-dimensional Euler equations with detailed finiterate chemistry. The results show that the calculated streak picture is in qualitative agreement with the picture recorded by a high speed streak camera from published literature. The three-dimensional flow field induced by a continuously rotating detonation was visualized and distinctive features of the rotating detonations were clearly depicted. Owing to the unconfined character of detonation wavelet, a deficit of detonation parameters was observed. Due to the effects of wall geometries, the strength of the outside detonation front is stronger than that of the inside portion. The detonation thus propagates with a constant circular velocity. Numerical simulation also shows three-dimensional rotating detonation structures, which display specific feature of the detonation- shock combined wave. Discrete burning gas pockets are formed due to instability of the discontinuity. It is believed that the present study could give an insight into the interest- ing properties of the continuously rotating detonation, and is thus beneficial to the design of continuous detonation propulsion systems.

Rotating electroosmotic flows in soft parallel plate microchannels

We present a theoretical investigation of rotating electroosmotic flows(EOFs) in soft parallel plate microchannels. The soft microchannel, also called as the polyelectrolyte-grafted microchannel, is denoted as a rigid microchannel coated with a polyelectrolyte layer(PEL) on its surface. We compare the velocity in a soft microchannel with that in a rigid one for different rotating frequencies and find that the PEL has a trend to lower the velocities in both directions for a larger equivalent electrical double layer(EDL) thickness λFCL(λFCL = 0.3) and a smaller rotating frequency ω(ω < 5).However, for a larger rotating frequency ω(ω = 5), the main stream velocity u far away from the channel walls in a soft microchannel exceeds that in a rigid one. Inspired by the above results, we can control the EOF velocity in micro rotating systems by imparting PELs on the microchannel walls, which may be an interesting application in biomedical separation and chemical reaction.

Dynamic behavior of a rotating gliding arc plasma in nitrogen:effects of gas flow rate and operating current

The effects of feed gas flow rate and operating current on the electrical characteristics and dynamic behavior of a rotating gliding arc （RGA） plasma codriven by a magnetic field and tangential flow were investigated.The operating current has been shown to significantly affect the time-resolved voltage waveforms of the discharge,particularly at flow rate =21 min^-1.When the current was lower than 140 mA,sinusoidal waveforms with regular variation periods of 13.5-17.0 ms can be observed （flow rate =21 min^-1）.The restrike mode characterized by serial sudden drops of voltage appeared under all studied conditions.Increasing the flow rate from 8 to 121 min^-1 （at the same current） led to a shift of arc rotation mode which would then result in a significant drop of discharge voltage （around 120-200 V）.For a given flow rate,the reduction of current resulted in a nearly linear increase of voltage.

Hydromagnetic rotating flow of third grade fluid

This work investigates the flow of a third grade fluid in a rotating frame of reference. The fluid is incompressible and magnetohydrodynamic （MHD）. The flow is bounded between two porous plates, the lower of which is shrinking linearly. Mathematical modelling of the considered flow leads to a nonlinear problem. The solution of this nonlinear problem is computed by the homotopy analysis method （HAM）. Graphs are presented to demonstrate the effect of several emerging parameters, which clearly describe the flow characteristics.

Starting flow in a rotating parallel plate channel

The starting flow due to a suddenly applied pressure gradient in a parallel plate channel which is rotating as a system is studied. Exact analytic series solutions to the unsteady Navier-Stokes equations are found by both the Laplace transform method and the separation of parameters method, the latter is shown to be superior. Rotation not only induces a secondary transverse flow but also alters the character of the transient flow rate and velocity profiles. Back flow and inertial oscillations occur, especially at higher rota- tion rates.

COMPUTATIONALINTELLECTUAL ANALYTICAL THEORYOF COMPUTATIONAL ANALYTICAL APPROACH TOROTATING FLOW OF NON_NEWTONIAN FLUID

A combination of the computational symbolic calculation, mathematical approach and physico-mechanical model lends to a computational intellectual analytical approach developed by the author. There is a principal difference between the computer proof and the computer derivation completed by the computer, also difference between the numerical and symbolic calculations. In this investigation the computational analytical approach is extended, and an unsteady flow of non-Newtonian fluid in the gap between two rotating coaxial cylinders is studied. The Oldroyd fluid B model is used by which the Weissenberg effects are explained in a good comparison with the experiments. The governing equations are reduced to a partial differential equation of 3 rd order for the dimensionless velocity. Using the computer software Macsyma and an improved variational approach the problem with the initial and boundary conditions is then reduced to a problem of an ordinary differential equation for different approximations. The analytical solutions are given for the 1 st, 2 nd and 3 rd approximations. The present investigation shows the ability of the computational symbolic manipulation in solving the problems of non-Newtonian fluid flows. There is a possibility of that to solve the problems in mathematics and mechanics. An important conclusion can be drawn from the results that the transition from a steady state to another steady state is non-unique.

Effects of symmetrically alternative rotating flow on flocculation

A symmetrically alternative rotating flow pattern was designed for flocculation process in order to produce large and dense flocs. The special effects of a symmetrically alternative rotating flow on the diameter and density of flocs were investigated. The results show that under the new fluid conditions, the primary particles on the outer part of the formed flocs may be cut down and the flocs contract at the end of the original rotating direction; then fluid changes its rotating direction, an opposite shearing is imposed to the flocs and makes some primary particles slide along the floc surface, leading to a denser floc; meanwhile, the broken and unflocculated particles on the trajectory may have opportunities to penetrate into or cohere to the flocs. Compared with the conventional rotating flow, the new-designed flow pattern can not only keep the floc size (even enlarge the floc diameter if a suitable flow is chosen) but also increase the floc density effectively.

Influence of Rotating Speed Ratio on the Annular Turbulent Flow between Two Rotating Cylinders

Rotating flows represent a very interesting area for researchers and industry for their extensive use in industrial and domestic machinery and especially for their great energy potential, annular flows are an example that draws the attention of researchers in recent years. The best design and optimization of these devices require knowledge of thermal, mechanical and hydrodynamic characteristics of flows circulating in these devices. An example of hydrodynamic parameters is the speed of rotation of the moving walls. This work is to study numerically the influence of the rotating speed ratio Γ of the two moving cylinders on the mean and especially on the turbulent quantities of the turbulent flow in the annular space. The numerical simulation is based on one-point statistical modeling using a low Reynolds number second-order full stress transport closure (RSM model), simulation code is not a black box but a completely transparent code where we can intervene at any step of the calculation. We have varied Γ from -1.0 to 1.0 while maintaining always the external cylinder with same speed Ω. The results show that the turbulence structure, profiles of mean velocities and the nature of the boundary layers of the mobile walls depend enormously on the ratio of speeds. The level of turbulence measured by the kinetic energy of turbulence and the Reynolds stresses shows well that the ratio Γ is an interesting parameter to exploit turbulence in this kind of annular flows.

Low frequency oscillatory flow in a rotating curved pipe

The low frequency oscillatory flow in a rotating curved pipe was studied by using the method of bi parameter perturbation. Perturbation solutions up to the second order were obtained and the effects of rotation on the low frequency oscillatory flow were examined in detail. The results indicated that there exists evident difference between the low frequency oscillatory flow in a rotating curved pipe and in a curved pipe without rotation. During a period, four secondary vortexes may exist on the circular cross section and the distribution of axial velocity and wall shear stress are related to the ratio of the Coriolis force to centrifugal force and the axial pressure gradient.

A phenomenological model for plastic flow behavior of rotating band material with a large temperature range

The plastic flow behavior of the rotating band material is investigated in this paper. The rotating band material is processed from H96 brass alloy, which is hardened to a much higher yield strength compared to the annealed one. The dynamically uniaxial compression behavior of the material is tested using the split Hopkinson pressure bar(SHPB) with temperature and strain rate ranging from 297 to 1073 K and500 to 3000 s^(-1), respectively, and a phenomenological plastic flow stress model is developed to describe the mechanical behavior of the material. The material is found to present noticeable temperature sensitivity and weak strain-rate sensitivity. The construction of the plastic flow stress model has two steps. Firstly, three univariate stress functions, taking plastic strain, plastic strain rate and temperature as independent variable, respectively, are proposed by fixing the other two variables. Then, as the three univariate functions describe the special cases of flow stress behavior under various conditions, the principle of stress compatibility is adopted to obtain the complete flow stress function. The numerical results show that the proposed plastic flow stress model is more suitable for the rotating band material than the existing well-known models.

Flow structure and rock-breaking feature of the self-rotating nozzle for radial jet drilling

For improving the hole-enlarging capability,roundness and rock-breaking efficiency of the nozzle in radial jet drilling,a new structure of self-rotating nozzle was put forward.The flow structure and rock-breaking features of the self-rotating nozzle were investigated with sliding mesh model and labortary tests and also compared with the straight and the swirling integrated nozzle and multi-orifice nozzle which have been applied in radial jet drilling.The results show that the self-rotating jet is energy concentrated,has longer effective distance,better hole-enlarging capability and roundness and impacts larger circular area at the bottom of the drilling hole,compared with the other two nozzles.Forward jet flow generated from the nozzle is peak shaped,and the jet velocity attenuates slowly at the outer edge.Due to periodic rotary percussion,the pressure fluctuates periodically on rock surface,improving shear and tensile failures on the rock matrix and thereby enhancing rock-breaking efficiency.The numerical simulation results of the flow structure of the nozzle are consistent with the experiments.This study provides an innovative approach for radial jet drilling technology in the petroleum industry.

Unsteady Flow Condition between Front and Rear Rotor of Contra-Rotating Small Sized Axial Fan

Contra-rotating small-sized axial fans are used as cooling fans for electric equipment. In the case of the contra-rotating rotors, the blade row distance between front and rear rotors is a key parameter for the performance and stable operation. The wake and potential interference occur between the front and rear rotors and leakage flow from the front rotor tip influences on the flow condition of the rear rotor near the shroud when the blade row distance is small. Therefore, it is important to clarify the flow condition between front and rear rotors. The fan static pressure curves were obtained by the experimental apparatus and the numerical analysis was also conducted to investigate the internal flow between front and rear rotors. The leakage flow from the front rotor tip reaches the leading edge of the rear rotor when the blade row distance is small as L = 10 mm and the pressure fluctuations at the leading edge of the rear rotor tip becomes larger than those at other radial positions. In the present paper, the vorticity contour between front and rear rotors is shown and pressure fluctuations related to the leakage flow from the front rotor is investigated using the numerical analysis result. Then, suitable blade row distance for the contra-rotating small sized axial fan is discussed based on the internal flow condition.

REYNOLDS-STRESS MODELLING OF TURBULENT ROTATING FLOWS

The present analysis shows that the EVM can not reflect the turbulence physics in non-inertial frame. The effects of Coriolis force on turbulence is embodied naturally in the Reynolds-stress transport equation. It is observed that the existing second-moment closure model with appropriate near-wall treatment can adequately predict flows in rotating channel and in axially rotating pipe for moderate rotation rate.

Comparison of Mass Transfer Characteristics between Countercurrent-Flow and Crosscurrent-Flow Rotating Packed Bed

The rotating packed bed(RPB), mainly including the countercurrent-flow RPB(Counter-RPB) and the crosscurrentflow RPB(Cross-RPB) that are classified from the perspective of gas-liquid contact style, is a novel process intensification device. A significant measurement standard for evaluating the performance of RPB is the mass transfer effect. In order to compare the mass transfer characteristics of Counter-RPB and Cross-RPB with the same size, the liquid volumetric mass transfer coefficient(k_La_e) and effective interfacial area(a_e) were measured under identical operating conditions. Meanwhile, the comparison of comprehensive mass transfer performance was conducted using the ratio of ΔP(pressure drop) to kLae as the standard. Experimental results indicated that kLae and ae increased with the increase in liquid spray density q, gas velocity u, and high gravity factor β. Furthermore, compared with the Cross-RPB, the Counter-RPB has higher liquid volumetric mass transfer coefficient and slightly larger effective interfacial area. The experimental results of comprehensive mass transfer performance showed that the Counter-RPB had higher ΔP/k_La_e than the Cross-RPB with changes in liquid spray density and high gravity factor, and there exists a turning point at 0.71 m/s accompanied by a variation with gas velocity. Moreover, the relative error of experimental value to calculated value, which was computed by the correlative expressions of kLae, was less than 5 %. In conclusion, the mass transfer characteristics of RPB are deeply impacted by the manner in which the flows are established and the Cross-RPB would have a great potential for industrial scale-up applications.