Massive amounts of low-grade tin middlings have been produced from tin tailings,in which arsenic and tin are worthy to be recycled.Owing to high sulfur content in these tin middlings,a novel self-sulfurization roastin...Massive amounts of low-grade tin middlings have been produced from tin tailings,in which arsenic and tin are worthy to be recycled.Owing to high sulfur content in these tin middlings,a novel self-sulfurization roasting was proposed to transform,separate and recover arsenic and tin in this research.There was no extra curing agent to be added,which decreased the formation of pollutant S-containing gas.The self-sulfurization process involved a two-stage roasting of reduction followed by sulfurization.First in reduction roasting,FeAsS decomposed to FeS and As and the As then transformed to As_(4)(g)and As_(4)S_(4)(g),via which the arsenic was separated and recovered.The arsenic content in the first residue could be decreased to 0.72 wt.%.Accompanied with it,the FeS was firstly oxidized to Fe_(1−x)S and then to SO_(2)(g)by the coexisted Fe_(2)O_(3),and finally reduced and combined with the independent Fe_(2)O_(3)to form Fe_(1−x)S.In the followed sulfurization roasting,the Fe_(1−x)S sulfurized SnO_(2)to SnS(g),due to which tin could be recovered and its content in the second residue decreased to 0.01 wt.%.This study provided an efficient method to separate and recover arsenic and tin from low-grade tin middlings.展开更多
The aim of this work is to inventory and study the lignicolous parasitic macrofungi of the Tin plant formation. The mycological outings from July to September 2018 and 2019, collected forty-four (44) basidiomes throug...The aim of this work is to inventory and study the lignicolous parasitic macrofungi of the Tin plant formation. The mycological outings from July to September 2018 and 2019, collected forty-four (44) basidiomes through a random sampling device over an area of 40,000 m2 including 1000 m long by 40 m2 wide. The standard methods and techniques used in mycology for taxonomic studies were used to describe and classify the carpophores collected in three families: Hymenochaetaceae, Ganodermataceae and Polyporaceae, into eight genera: Onnia (4.55%), Amauroderma (4.55%), Ganoderma (20.45%), Phellinus (52.27%), Inonotus (4.55%), Phellinopsis (6.82%), Grammothele (2.27%) and Trametes (4.55%). The genera Phellinus and Ganoderma were the most abundant. Finally, eight species were identified: Inonotus cf. ochroporus, Inonotus cf. pachyphloeus, Phellinus cf. cryptarum, Phellinus cf. hartigii, Phellinus cf. hippophaecola;Phellinus cf. robustus, Phellinus cf. igniarius, et Amauroderma cf. fasciculatum. Seven fungal species belong to the family Hymenochaetaceae and only the species Amauroderma cf. fasciculatum is a Ganodermataceae. However, all these fungal species are shown to be parasites of trunks and/or branches of the following woody: Parkia biglobosa (50%), Anogeissus leiocarpus (25%), Annona senegalensis (12.5%) and Mangifera indica (12.5%). Authors attest that the presence of phytoparasitic polypores in a plant formation is an indicator of aging hence the urgency to put in place the appropriate measures to safeguard and restore Tin’s plant formation.展开更多
The growth of high-quality germanium tin(Ge_(1–y)Sn_(y))binary alloys on a Si substrate using chemical vapor deposition(CVD)techniques holds immense potential for advancing electronics and optoelectronics application...The growth of high-quality germanium tin(Ge_(1–y)Sn_(y))binary alloys on a Si substrate using chemical vapor deposition(CVD)techniques holds immense potential for advancing electronics and optoelectronics applications,including the development of efficient and low-cost mid-infrared detectors and light sources.However,achieving precise control over the Sn concentration and strain relaxation of the Ge_(1–y)Sn_(y)epilayer,which directly influence its optical and electrical properties,remain a significant challenge.In this research,the effect of strain relaxation on the growth rate of Ge_(1–y)Sn_(y)epilayers,with Sn concentration>11at.%,is investigated.It is successfully demonstrated that the growth rate slows down by~55%due to strain relaxation after passing its critical thickness,which suggests a reduction in the incorporation of Ge into Ge_(1–y)Sn_(y)growing layers.Despite the increase in Sn concentration as a result of the decrease in the growth rate,it has been found that the Sn incorporation rate into Ge_(1–y)Sn_(y)growing layers has also decreased due to strain relaxation.Such valuable insights could offer a foundation for the development of innovative growth techniques aimed at achieving high-quality Ge_(1–y)Sn_(y)epilayers with tuned Sn concentration and strain relaxation.展开更多
The aim of this study of the spatial dispersion of tin, niobium and tantalum mineralization associated with the Mayo Darlé granitoids was to produce prospecting guides through predictive maps of Sn, Nb and Ta in ...The aim of this study of the spatial dispersion of tin, niobium and tantalum mineralization associated with the Mayo Darlé granitoids was to produce prospecting guides through predictive maps of Sn, Nb and Ta in the region. It was based on a database (in appendix) obtained after analysis of rock samples (greisens and quartz veins) collected in the field, using a portable X-ray fluorescence (XRF) spectrometer. Two approaches were used: 1) structural studies in the field using the directions of veins and fractures 2) the use of variographic maps, an essential element in geostatistics for determining directional anisotropies. A joint synthesis of the modelling results shows that tin, tantalum and niobium mineralization at Mayo Darlé is concentrated along strike intervals N315E to N320E, with mineralization also occurring along strike N35E for high-grade Sn, medium-grade Ta and low-grade Nb. In short, mineral concentrations disperse progressively in space: positively from east to west for tantalum and niobium, and inversely for tin.展开更多
Perovskites are a category of materials with a unique crystal structure that allows them to absorb sunlight efficiently. This efficiency is particularly high in the case of CH<sub>3</sub>NH<sub>3<...Perovskites are a category of materials with a unique crystal structure that allows them to absorb sunlight efficiently. This efficiency is particularly high in the case of CH<sub>3</sub>NH<sub>3</sub>Pb<sub>1-x</sub>Sn<sub>x</sub>I<sub>3</sub> mixed perovskites. The combination of lead (Pb) and tin (Sn) in this matrix provides a broad spectrum of sunlight absorption, enabling the generation of a larger voltage and, subsequently, increased power. The primary objective in solar cell development is to maximize the conversion of sunlight into electricity. Mixed perovskites like CH<sub>3</sub>NH<sub>3</sub>Pb<sub>1-x</sub>Sn<sub>x</sub>I<sub>3</sub> have demonstrated significant potential in this regard. Their tunable bandgap, courtesy of varying the Pb: Sn ratio, allows for the optimization of sunlight absorption. The result is solar cells that surpass many conventional counterparts in terms of energy efficiency. Another significant advantage of these mixed perovskite solar cells is their cost-effectiveness. They can be manufactured using solution-based processes, which are less expensive than the high-vacuum methods required for traditional silicon solar cells. While the prospects for mixed perovskite solar cells are undeniably promising, there are concerns about the toxicity of lead, a key component of these cells. Lead is known to have harmful effects on the environment and health. The aim of our work is to reduce or eliminate lead toxicity in the perovskite cell while maintaining its efficiency. Thus, in a theoretical and experimental approach, we obtained following efficiencies of samples: CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> (22.49%) CH<sub>3</sub>NH<sub>3</sub>Pb<sub>0.75</sub>Sn<sub>0.25</sub>I<sub>3</sub> (22.72%), CH<sub>3</sub>NH<sub>3</sub>Pb<sub>0.5</sub>Sn<sub>0.5</sub>I<sub>3</sub> (23.00%) CH<sub>3</sub>NH<sub>3</sub>Pb<sub>0.25</sub>Sn<sub>0.75</sub>I<sub>3</sub> (22.61%), CH<sub>3</sub>NH<sub>3</sub>SnI<sub>3</sub> (22.38%). Doping with 50% tin gives the highest result (23.00%). By replacing a fraction of the lead with tin, the research aims to reduce the environmental footprint of the cells while maintaining their high performance. However, the challenge is to achieve a balance that does not compromise performance while reducing toxicity. .展开更多
基金Project(52174384)supported by the National Natural Science Foundation of ChinaProject(LZB2021003)supported by Fundamental Research Funds for the Central Universities,China。
文摘Massive amounts of low-grade tin middlings have been produced from tin tailings,in which arsenic and tin are worthy to be recycled.Owing to high sulfur content in these tin middlings,a novel self-sulfurization roasting was proposed to transform,separate and recover arsenic and tin in this research.There was no extra curing agent to be added,which decreased the formation of pollutant S-containing gas.The self-sulfurization process involved a two-stage roasting of reduction followed by sulfurization.First in reduction roasting,FeAsS decomposed to FeS and As and the As then transformed to As_(4)(g)and As_(4)S_(4)(g),via which the arsenic was separated and recovered.The arsenic content in the first residue could be decreased to 0.72 wt.%.Accompanied with it,the FeS was firstly oxidized to Fe_(1−x)S and then to SO_(2)(g)by the coexisted Fe_(2)O_(3),and finally reduced and combined with the independent Fe_(2)O_(3)to form Fe_(1−x)S.In the followed sulfurization roasting,the Fe_(1−x)S sulfurized SnO_(2)to SnS(g),due to which tin could be recovered and its content in the second residue decreased to 0.01 wt.%.This study provided an efficient method to separate and recover arsenic and tin from low-grade tin middlings.
文摘The aim of this work is to inventory and study the lignicolous parasitic macrofungi of the Tin plant formation. The mycological outings from July to September 2018 and 2019, collected forty-four (44) basidiomes through a random sampling device over an area of 40,000 m2 including 1000 m long by 40 m2 wide. The standard methods and techniques used in mycology for taxonomic studies were used to describe and classify the carpophores collected in three families: Hymenochaetaceae, Ganodermataceae and Polyporaceae, into eight genera: Onnia (4.55%), Amauroderma (4.55%), Ganoderma (20.45%), Phellinus (52.27%), Inonotus (4.55%), Phellinopsis (6.82%), Grammothele (2.27%) and Trametes (4.55%). The genera Phellinus and Ganoderma were the most abundant. Finally, eight species were identified: Inonotus cf. ochroporus, Inonotus cf. pachyphloeus, Phellinus cf. cryptarum, Phellinus cf. hartigii, Phellinus cf. hippophaecola;Phellinus cf. robustus, Phellinus cf. igniarius, et Amauroderma cf. fasciculatum. Seven fungal species belong to the family Hymenochaetaceae and only the species Amauroderma cf. fasciculatum is a Ganodermataceae. However, all these fungal species are shown to be parasites of trunks and/or branches of the following woody: Parkia biglobosa (50%), Anogeissus leiocarpus (25%), Annona senegalensis (12.5%) and Mangifera indica (12.5%). Authors attest that the presence of phytoparasitic polypores in a plant formation is an indicator of aging hence the urgency to put in place the appropriate measures to safeguard and restore Tin’s plant formation.
文摘The growth of high-quality germanium tin(Ge_(1–y)Sn_(y))binary alloys on a Si substrate using chemical vapor deposition(CVD)techniques holds immense potential for advancing electronics and optoelectronics applications,including the development of efficient and low-cost mid-infrared detectors and light sources.However,achieving precise control over the Sn concentration and strain relaxation of the Ge_(1–y)Sn_(y)epilayer,which directly influence its optical and electrical properties,remain a significant challenge.In this research,the effect of strain relaxation on the growth rate of Ge_(1–y)Sn_(y)epilayers,with Sn concentration>11at.%,is investigated.It is successfully demonstrated that the growth rate slows down by~55%due to strain relaxation after passing its critical thickness,which suggests a reduction in the incorporation of Ge into Ge_(1–y)Sn_(y)growing layers.Despite the increase in Sn concentration as a result of the decrease in the growth rate,it has been found that the Sn incorporation rate into Ge_(1–y)Sn_(y)growing layers has also decreased due to strain relaxation.Such valuable insights could offer a foundation for the development of innovative growth techniques aimed at achieving high-quality Ge_(1–y)Sn_(y)epilayers with tuned Sn concentration and strain relaxation.
文摘The aim of this study of the spatial dispersion of tin, niobium and tantalum mineralization associated with the Mayo Darlé granitoids was to produce prospecting guides through predictive maps of Sn, Nb and Ta in the region. It was based on a database (in appendix) obtained after analysis of rock samples (greisens and quartz veins) collected in the field, using a portable X-ray fluorescence (XRF) spectrometer. Two approaches were used: 1) structural studies in the field using the directions of veins and fractures 2) the use of variographic maps, an essential element in geostatistics for determining directional anisotropies. A joint synthesis of the modelling results shows that tin, tantalum and niobium mineralization at Mayo Darlé is concentrated along strike intervals N315E to N320E, with mineralization also occurring along strike N35E for high-grade Sn, medium-grade Ta and low-grade Nb. In short, mineral concentrations disperse progressively in space: positively from east to west for tantalum and niobium, and inversely for tin.
文摘Perovskites are a category of materials with a unique crystal structure that allows them to absorb sunlight efficiently. This efficiency is particularly high in the case of CH<sub>3</sub>NH<sub>3</sub>Pb<sub>1-x</sub>Sn<sub>x</sub>I<sub>3</sub> mixed perovskites. The combination of lead (Pb) and tin (Sn) in this matrix provides a broad spectrum of sunlight absorption, enabling the generation of a larger voltage and, subsequently, increased power. The primary objective in solar cell development is to maximize the conversion of sunlight into electricity. Mixed perovskites like CH<sub>3</sub>NH<sub>3</sub>Pb<sub>1-x</sub>Sn<sub>x</sub>I<sub>3</sub> have demonstrated significant potential in this regard. Their tunable bandgap, courtesy of varying the Pb: Sn ratio, allows for the optimization of sunlight absorption. The result is solar cells that surpass many conventional counterparts in terms of energy efficiency. Another significant advantage of these mixed perovskite solar cells is their cost-effectiveness. They can be manufactured using solution-based processes, which are less expensive than the high-vacuum methods required for traditional silicon solar cells. While the prospects for mixed perovskite solar cells are undeniably promising, there are concerns about the toxicity of lead, a key component of these cells. Lead is known to have harmful effects on the environment and health. The aim of our work is to reduce or eliminate lead toxicity in the perovskite cell while maintaining its efficiency. Thus, in a theoretical and experimental approach, we obtained following efficiencies of samples: CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> (22.49%) CH<sub>3</sub>NH<sub>3</sub>Pb<sub>0.75</sub>Sn<sub>0.25</sub>I<sub>3</sub> (22.72%), CH<sub>3</sub>NH<sub>3</sub>Pb<sub>0.5</sub>Sn<sub>0.5</sub>I<sub>3</sub> (23.00%) CH<sub>3</sub>NH<sub>3</sub>Pb<sub>0.25</sub>Sn<sub>0.75</sub>I<sub>3</sub> (22.61%), CH<sub>3</sub>NH<sub>3</sub>SnI<sub>3</sub> (22.38%). Doping with 50% tin gives the highest result (23.00%). By replacing a fraction of the lead with tin, the research aims to reduce the environmental footprint of the cells while maintaining their high performance. However, the challenge is to achieve a balance that does not compromise performance while reducing toxicity. .
