Nanostructured tin dioxide （SnO2） powders were prepared by a sol-gel dialytic process and and the doping of CuO on it was completed by a deposition-precipitation method.The thick film sensors were fabricated from th...Nanostructured tin dioxide （SnO2） powders were prepared by a sol-gel dialytic process and and the doping of CuO on it was completed by a deposition-precipitation method.The thick film sensors were fabricated from the CuO/SnO2 polycrystalline powders.Sensing behavior of the sensor was investigated with various gases including CO,H2,NH3,hexane,acetone,ethanol,methanol and H2S in air.The as-synthesized gas sensor had much better response to H2S than to other gases.At the same time,the CuO/SnO2 sensor had enough sensitivity,together with fast response and recovery,to distinguish H2S from those gases at 160 and 210 ℃.Therefore,it might have promising applications in the future.展开更多
This work reports an FTIR study of the NO_x adsorption/desorption cycles on tin oxide nanosized particles under the operating conditions of real sensors (150℃,in presence of O_2).The chemical reactions are monitored...This work reports an FTIR study of the NO_x adsorption/desorption cycles on tin oxide nanosized particles under the operating conditions of real sensors (150℃,in presence of O_2).The chemical reactions are monitored in situ and correlated with the variations of the SnO_2 electrical conductivity.On the basis of the FTIR spectra,two contributing mechanisms for the NO_x detection are suggested.The first one presents the formation of bridged nitrate groups bound to the SnO_2 surface via oxygen vacancies acting as electron donor sites.The second mechanism also involves surface oxygen vacancies in the coordination of NO_x,but this time the formation of NO_x anionic species is considered.Both mechanisms lead to the decrease of the electrical conductivity under NO_x adsorption.However,the bridged nitrate groups are not reversible under gas desorption and thus irreversibly contaminate the surface after the first NO_x adsorption.On the contrary,the nitrosyl anionic species are reversible and,from the second NO_x adsorption/desorption cycle,ensure the reproducibility of the sensor response.展开更多
文摘Nanostructured tin dioxide （SnO2） powders were prepared by a sol-gel dialytic process and and the doping of CuO on it was completed by a deposition-precipitation method.The thick film sensors were fabricated from the CuO/SnO2 polycrystalline powders.Sensing behavior of the sensor was investigated with various gases including CO,H2,NH3,hexane,acetone,ethanol,methanol and H2S in air.The as-synthesized gas sensor had much better response to H2S than to other gases.At the same time,the CuO/SnO2 sensor had enough sensitivity,together with fast response and recovery,to distinguish H2S from those gases at 160 and 210 ℃.Therefore,it might have promising applications in the future.
基金financially supported by the National Natural Science Foundation of China(NSFC,U21A20500,52072115,51972102)the Natural Science Project of Hubei Province in China(2023AFB758,2022CFB518)。
文摘This work reports an FTIR study of the NO_x adsorption/desorption cycles on tin oxide nanosized particles under the operating conditions of real sensors (150℃,in presence of O_2).The chemical reactions are monitored in situ and correlated with the variations of the SnO_2 electrical conductivity.On the basis of the FTIR spectra,two contributing mechanisms for the NO_x detection are suggested.The first one presents the formation of bridged nitrate groups bound to the SnO_2 surface via oxygen vacancies acting as electron donor sites.The second mechanism also involves surface oxygen vacancies in the coordination of NO_x,but this time the formation of NO_x anionic species is considered.Both mechanisms lead to the decrease of the electrical conductivity under NO_x adsorption.However,the bridged nitrate groups are not reversible under gas desorption and thus irreversibly contaminate the surface after the first NO_x adsorption.On the contrary,the nitrosyl anionic species are reversible and,from the second NO_x adsorption/desorption cycle,ensure the reproducibility of the sensor response.
