The unique structural features represented by micro-nanoneedle tip structure reflect wonderful physical and chemical properties.The tip effect includes the concentration of energy such as electrons,photons and magneti...The unique structural features represented by micro-nanoneedle tip structure reflect wonderful physical and chemical properties.The tip effect includes the concentration of energy such as electrons,photons and magnetism in the tip region,which has promising applications in the fields of energy conversion,water capture,environmental restoration and so on.In this review,a comprehensive and systematic summary of the latest advances in the application of the tip effect in different fields is provided.Utilizing advanced Finite Difference Time Domain simulation,we further propose our understanding of the fundamental mechanism of the tip effect induced by micro-nanostructure.However,we need to forge the present study to further reveal the essential law of the tip effect from the perspective of theoretical calculations.This review would provide a solid foundation for further development and application of the tip effect.展开更多
The tip vortices and aerodynamics of a NACA0012 wing in the vicinity of the ground were studied in a wind tunnel.The wing tip vortex structures and lift/drag forces were measured by a seven-hole probe and a force bala...The tip vortices and aerodynamics of a NACA0012 wing in the vicinity of the ground were studied in a wind tunnel.The wing tip vortex structures and lift/drag forces were measured by a seven-hole probe and a force balance,respectively.The evolution of the flow structures and aerodynamics with a ground height were analyzed.The vorticity of tip vortices was found to reduce with the decreasing of the ground height,and the position of vortex-core moved gradually to the outboard of the wing tip.Therefore,the down-wash flow induced by the tip vortices was weakened. However,vortex breakdown occurred as the wing lowered to the ground.From the experimental results of aerodynamics,the maximum lift-to-drag ratio was observed when the angle of attack was 2.5°and the ground clearance was 0.2.展开更多
The strain gradient effect becomes significant when the size of frac- ture process zone around a crack tip is comparable to the intrinsic material length l, typically of the order of microns. Using the new strain grad...The strain gradient effect becomes significant when the size of frac- ture process zone around a crack tip is comparable to the intrinsic material length l, typically of the order of microns. Using the new strain gradient deformation theory given by Chen and Wang, the asymptotic fields near a crack tip in an elastic-plastic material with strain gradient effects are investigated. It is established that the dom- inant strain field is irrotational. For mode Ⅰ plane stress crack tip asymptotic field, the stress asymptotic field and the couple stress asymptotic field can not exist si- multaneously. In the stress dominated asymptotic field, the angular distributions of stresses are consistent with the classical plane stress HRR field; In the couple stress dominated asymptotic field, the angular distributions of couple stresses are consistent with that obtained by Huang et al. For mode Ⅱ plane stress and plane strain crack tip asymptotic fields, only the stress-dominated asymptotic fields exist. The couple stress asymptotic field is less singular than the stress asymptotic fields. The stress asymptotic fields are the same as mode Ⅱ plane stress and plane strain HRR fields, respectively. The increase in stresses is not observed in strain gradient plasticity for mode Ⅰ and mode Ⅱ, because the present theory is based only on the rotational gradi- ent of deformation and the crack tip asymptotic fields are irrotational and dominated by the stretching gradient.展开更多
A plane strain mode 1 crack tip field with strain gradient effects is investigated.A new strain gradient theory is used.An elastic-power law hardening strain gradient material is considered and two hardening laws,i.e....A plane strain mode 1 crack tip field with strain gradient effects is investigated.A new strain gradient theory is used.An elastic-power law hardening strain gradient material is considered and two hardening laws,i.e.a separation law and an integration law are used respectively.As for the material with the separation law hardening,the angular distributions of stresses are consistent with the HRR field,which differs from the stress results;the angular distributions of couple stresses are the same as the couple stress results.For the material with the integration law hardening,the stress field and the couple stress field can not exist simultaneously,which is the same as the conclusion,but for the stress dominated field,the an- gular distributions of stresses are consistent with the HRR field;for the couple stress dominated field,the an- gular distributions of couple stresses are consistent with those in Ref.However,the increase in stresses is not observed in strain gradient plasticity because the present theory is based on the rotation gradient of the deformation only,while the crack tip field of mode 1 is dominated by the tension gradient,which will be shown in another paper.展开更多
A new effective propeller performance estimation method is employed to calculate the propeller performance in the preliminary design of unmanned aerial vehicles(UAVs).The propeller three-dimensional aerodynamic charac...A new effective propeller performance estimation method is employed to calculate the propeller performance in the preliminary design of unmanned aerial vehicles(UAVs).The propeller three-dimensional aerodynamic characteristics leading to the blade tip vortices are considered to improve the blade element theory.The rule of the airfoil lift coefficient is summarized to enhance the calculation speed and the universality of this method.Then,wind tunnel test data of the propellers are used to verify the correctness of the approach.The error is less than9%,which is accurate enough in the preliminary design of UAVs.Sensitivity analysis is carried out with the variable empirical parameters,and the values of which only have slight influence on the calculated results.Compared with the strip theory,the proposed method avoids a very high number of iterations and complicated integral.Furthermore,only a few measurable data are needed to get a relatively accurate result.The calculation examples demonstrate excellent effectiveness in obtaining the propeller performance to improve the design of UAVs.展开更多
The crack tip fields are investigated for a cracked functionally graded material （FGM） plate by Reissner＇s linear plate theory with the consideration of the transverse shear deformation generated by bending. The el...The crack tip fields are investigated for a cracked functionally graded material （FGM） plate by Reissner＇s linear plate theory with the consideration of the transverse shear deformation generated by bending. The elastic modulus and Poisson＇s ratio of the functionally graded plates are assumed to vary continuously through the coordinate y, according to a linear law and a constant, respectively. The governing equations, i.e., the 6th-order partial differential equations with variable coefficients, are derived in the polar coordinate system based on Reissner＇s plate theory. Furthermore, the generalized displacements are treated in a separation-of-variable form, and the higher-order crack tip fields of the cracked FGM plate are obtained by the eigen-expansion method. It is found that the analytic solutions degenerate to the corresponding fields of the isotropic homogeneous plate with Reissner＇s effect when the in-homogeneity parameter approaches zero.展开更多
In this paper, the following conclusions are reached: The influence of damage on the stress and strain feilds can be neglected in an asymptotic sense for the solutions of damage field in a plastic solid containing sma...In this paper, the following conclusions are reached: The influence of damage on the stress and strain feilds can be neglected in an asymptotic sense for the solutions of damage field in a plastic solid containing small damage. The formulation of the problem is simplified with an uncoupled approach. Based on experimental results of plastic damage, most of the damage in the material are con- sidered as small damage with the critacal damage variable ω_c<<1. Using this approach, closed form ex- pressions of the near tip damage fields for mode Ⅲ, mode I and the temperature distribution induced by plastic dissipation in a hardening material containing damage are deduced. We point out that the temperature distribution in the process zone is strongly dependent on the damage of materials even for the small damage case. The results of the predicted value of the temperature rise near the tip region ignoring the damage effect is appreciably higher than the observed data. The main reason of this discrepancy is the presence of damage dissipation and the fact that its influence on the calculation of plas- tic dissipation have not been appropriately taken account of. The calculation is improved by taking in- to account the damage effect on the temperature rise, then the T_(max) value is in better accord with the experimental value.展开更多
Purpose: To evaluate the performance of a phacoemulsification system in terms of effective (EPT) and total phaco time (TPT) using 20G and 21G phaco tips. Methods: Retrospective comparative study including 143 consecut...Purpose: To evaluate the performance of a phacoemulsification system in terms of effective (EPT) and total phaco time (TPT) using 20G and 21G phaco tips. Methods: Retrospective comparative study including 143 consecutive cataractous eyes undergoing phacoemulsification cataract surgery with the Visalis 500 device. The 20G and 21G phaco tips were used in 46 and 97 eyes, respectively. The EPT and TPT values were evaluated. Results: Median TPT was 11.25 s and 17.50 s in the 20G and 21G groups, respectively (p = 0.0011). Median EPT values were 3.15 s and 5.00 s in the 20G and 21G groups, respectively (p = 0.0032). TPT and EPT were significantly lower in 3/3+ cataract eyes compared to 4/4+ using both tips (p < 0.001). Conclusions: The Visalis 500 allows cataract surgery with reduced TPT and EPT, even in hard cataracts. The use of the 20G phaco tip provides an additional benefit in terms of reduction of phaco time.展开更多
A mechanical model is established for modeⅡinterfacial crack static growing along an elastic-elastic power law creeping bimaterial interface. For frictional contact of boundary conditions on crack faces, asymptotic s...A mechanical model is established for modeⅡinterfacial crack static growing along an elastic-elastic power law creeping bimaterial interface. For frictional contact of boundary conditions on crack faces, asymptotic solutions of the stresses and strains of near tip-crack are got. It was shown that in stable creep growing phase, elastic deformation and viscous deformation are equally dominant in the near-tip field, the stress and strain have the same singularity and there is not the oscillatory singularity the field. Through numerical calculation , it is shown that the frictional coefficient η notably influence the crack-tip field.展开更多
基金This work was financially supported by the Natural Science Foundation of China(No.51902101)Natural Science Foundation of Jiangsu Province(No.BK20201381)+1 种基金Science Foundation of Nanjing University of Posts and Telecommunications(No.NY219144)the National College Student Innovation and Entrepreneurship Training Program(No.202210293017Z).
文摘The unique structural features represented by micro-nanoneedle tip structure reflect wonderful physical and chemical properties.The tip effect includes the concentration of energy such as electrons,photons and magnetism in the tip region,which has promising applications in the fields of energy conversion,water capture,environmental restoration and so on.In this review,a comprehensive and systematic summary of the latest advances in the application of the tip effect in different fields is provided.Utilizing advanced Finite Difference Time Domain simulation,we further propose our understanding of the fundamental mechanism of the tip effect induced by micro-nanostructure.However,we need to forge the present study to further reveal the essential law of the tip effect from the perspective of theoretical calculations.This review would provide a solid foundation for further development and application of the tip effect.
基金supported by the National Natural Science Foundation of China(11072142)Shanghai Program for Innovative Research Team in Universities
文摘The tip vortices and aerodynamics of a NACA0012 wing in the vicinity of the ground were studied in a wind tunnel.The wing tip vortex structures and lift/drag forces were measured by a seven-hole probe and a force balance,respectively.The evolution of the flow structures and aerodynamics with a ground height were analyzed.The vorticity of tip vortices was found to reduce with the decreasing of the ground height,and the position of vortex-core moved gradually to the outboard of the wing tip.Therefore,the down-wash flow induced by the tip vortices was weakened. However,vortex breakdown occurred as the wing lowered to the ground.From the experimental results of aerodynamics,the maximum lift-to-drag ratio was observed when the angle of attack was 2.5°and the ground clearance was 0.2.
文摘The strain gradient effect becomes significant when the size of frac- ture process zone around a crack tip is comparable to the intrinsic material length l, typically of the order of microns. Using the new strain gradient deformation theory given by Chen and Wang, the asymptotic fields near a crack tip in an elastic-plastic material with strain gradient effects are investigated. It is established that the dom- inant strain field is irrotational. For mode Ⅰ plane stress crack tip asymptotic field, the stress asymptotic field and the couple stress asymptotic field can not exist si- multaneously. In the stress dominated asymptotic field, the angular distributions of stresses are consistent with the classical plane stress HRR field; In the couple stress dominated asymptotic field, the angular distributions of couple stresses are consistent with that obtained by Huang et al. For mode Ⅱ plane stress and plane strain crack tip asymptotic fields, only the stress-dominated asymptotic fields exist. The couple stress asymptotic field is less singular than the stress asymptotic fields. The stress asymptotic fields are the same as mode Ⅱ plane stress and plane strain HRR fields, respectively. The increase in stresses is not observed in strain gradient plasticity for mode Ⅰ and mode Ⅱ, because the present theory is based only on the rotational gradi- ent of deformation and the crack tip asymptotic fields are irrotational and dominated by the stretching gradient.
基金the National Natural Science Foundation of China (No.19704100)Science Foundation of Chinese Academy of Sciences (Project KJ951-1-20)CASK.C.Wong Post-doctoral Research Award Fund and the Post Doctoral Science Fund of China.
文摘A plane strain mode 1 crack tip field with strain gradient effects is investigated.A new strain gradient theory is used.An elastic-power law hardening strain gradient material is considered and two hardening laws,i.e.a separation law and an integration law are used respectively.As for the material with the separation law hardening,the angular distributions of stresses are consistent with the HRR field,which differs from the stress results;the angular distributions of couple stresses are the same as the couple stress results.For the material with the integration law hardening,the stress field and the couple stress field can not exist simultaneously,which is the same as the conclusion,but for the stress dominated field,the an- gular distributions of stresses are consistent with the HRR field;for the couple stress dominated field,the an- gular distributions of couple stresses are consistent with those in Ref.However,the increase in stresses is not observed in strain gradient plasticity because the present theory is based on the rotation gradient of the deformation only,while the crack tip field of mode 1 is dominated by the tension gradient,which will be shown in another paper.
基金supported by the National Aerospace Science Foundation of China(2011ZA72003)
文摘A new effective propeller performance estimation method is employed to calculate the propeller performance in the preliminary design of unmanned aerial vehicles(UAVs).The propeller three-dimensional aerodynamic characteristics leading to the blade tip vortices are considered to improve the blade element theory.The rule of the airfoil lift coefficient is summarized to enhance the calculation speed and the universality of this method.Then,wind tunnel test data of the propellers are used to verify the correctness of the approach.The error is less than9%,which is accurate enough in the preliminary design of UAVs.Sensitivity analysis is carried out with the variable empirical parameters,and the values of which only have slight influence on the calculated results.Compared with the strip theory,the proposed method avoids a very high number of iterations and complicated integral.Furthermore,only a few measurable data are needed to get a relatively accurate result.The calculation examples demonstrate excellent effectiveness in obtaining the propeller performance to improve the design of UAVs.
基金supported by the National Natural Science Foundation of China(Nos.90305023 and 11172332)
文摘The crack tip fields are investigated for a cracked functionally graded material （FGM） plate by Reissner＇s linear plate theory with the consideration of the transverse shear deformation generated by bending. The elastic modulus and Poisson＇s ratio of the functionally graded plates are assumed to vary continuously through the coordinate y, according to a linear law and a constant, respectively. The governing equations, i.e., the 6th-order partial differential equations with variable coefficients, are derived in the polar coordinate system based on Reissner＇s plate theory. Furthermore, the generalized displacements are treated in a separation-of-variable form, and the higher-order crack tip fields of the cracked FGM plate are obtained by the eigen-expansion method. It is found that the analytic solutions degenerate to the corresponding fields of the isotropic homogeneous plate with Reissner＇s effect when the in-homogeneity parameter approaches zero.
基金The project supported by the National Natural Science Foundation of China.
文摘In this paper, the following conclusions are reached: The influence of damage on the stress and strain feilds can be neglected in an asymptotic sense for the solutions of damage field in a plastic solid containing small damage. The formulation of the problem is simplified with an uncoupled approach. Based on experimental results of plastic damage, most of the damage in the material are con- sidered as small damage with the critacal damage variable ω_c<<1. Using this approach, closed form ex- pressions of the near tip damage fields for mode Ⅲ, mode I and the temperature distribution induced by plastic dissipation in a hardening material containing damage are deduced. We point out that the temperature distribution in the process zone is strongly dependent on the damage of materials even for the small damage case. The results of the predicted value of the temperature rise near the tip region ignoring the damage effect is appreciably higher than the observed data. The main reason of this discrepancy is the presence of damage dissipation and the fact that its influence on the calculation of plas- tic dissipation have not been appropriately taken account of. The calculation is improved by taking in- to account the damage effect on the temperature rise, then the T_(max) value is in better accord with the experimental value.
文摘Purpose: To evaluate the performance of a phacoemulsification system in terms of effective (EPT) and total phaco time (TPT) using 20G and 21G phaco tips. Methods: Retrospective comparative study including 143 consecutive cataractous eyes undergoing phacoemulsification cataract surgery with the Visalis 500 device. The 20G and 21G phaco tips were used in 46 and 97 eyes, respectively. The EPT and TPT values were evaluated. Results: Median TPT was 11.25 s and 17.50 s in the 20G and 21G groups, respectively (p = 0.0011). Median EPT values were 3.15 s and 5.00 s in the 20G and 21G groups, respectively (p = 0.0032). TPT and EPT were significantly lower in 3/3+ cataract eyes compared to 4/4+ using both tips (p < 0.001). Conclusions: The Visalis 500 allows cataract surgery with reduced TPT and EPT, even in hard cataracts. The use of the 20G phaco tip provides an additional benefit in terms of reduction of phaco time.
基金the Natural Science Foundation of Heilongjiang Province(A009).
文摘A mechanical model is established for modeⅡinterfacial crack static growing along an elastic-elastic power law creeping bimaterial interface. For frictional contact of boundary conditions on crack faces, asymptotic solutions of the stresses and strains of near tip-crack are got. It was shown that in stable creep growing phase, elastic deformation and viscous deformation are equally dominant in the near-tip field, the stress and strain have the same singularity and there is not the oscillatory singularity the field. Through numerical calculation , it is shown that the frictional coefficient η notably influence the crack-tip field.
