Scaffolds require individual external shape and well-defined internal structure, which is of great importance for tissue engineering. Rapid prototyping (RP) uses layer-manufacturing strategies to create physical objec...Scaffolds require individual external shape and well-defined internal structure, which is of great importance for tissue engineering. Rapid prototyping (RP) uses layer-manufacturing strategies to create physical objects and has the advantage on scaffold fabrication. A new RP technology called aerodynamically assisted tip-pen direct writing was developed to construct the complex architectures. Compared with the traditional nozzle, the new nozzle has a micro-tip in the center of the micro-hole. The flow is determined by the gap between the micro-hole and micro-tip, which makes it practical for more accurate flow control. A highly accurate three-dimensional (3-D) micro-positioning system was employed with the new nozzle to deposit maltose structures. 3-D architectures had been made by this method, the width of fiber in which is about 120 μm. The results show that this method provides a possibility to construct 3-D scaffolds with tissue-scale features (i.e., 10-100 μm) without bad influence on the biological activities.展开更多
Flexible and wearable humidity sensors play a vital role in daily point-of-care diagnosis and noncontact human-machine interactions.However,achieving a facile and high-speed fabrication approach to realizing flexible ...Flexible and wearable humidity sensors play a vital role in daily point-of-care diagnosis and noncontact human-machine interactions.However,achieving a facile and high-speed fabrication approach to realizing flexible humidity sensors remains a challenge.In this work,a wearable capacitive-type Ga_(2)O_(3)/liquid metal-based humidity sensor is demonstrated by a one-step laser direct writing technique.Owing to the photothermal effect of laser,the Ga_(2)O_(3)-wrapped liquid metal particles can be selectively sintered and converted from insulative to conductive traces with a resistivity of 0.19Ω·cm,while the untreated regions serve as active sensing layers in response to moisture changes.Under 95%relative humidity,the humidity sensor displays a highly stable performance along with rapid response and recover time.Utilizing these superior properties,the Ga_(2)O_(3)/liquid metal-based humidity sensor is able to monitor human respiration rate,as well as skin moisture of the palm under different physiological states for healthcare monitoring.展开更多
This paper reports the fabrication of regular large-area laser-induced periodic surface structures(LIPSSs)in indium tin oxide(ITO)films via femtosecond laser direct writing focused by a cylindrical lens.The regular LI...This paper reports the fabrication of regular large-area laser-induced periodic surface structures(LIPSSs)in indium tin oxide(ITO)films via femtosecond laser direct writing focused by a cylindrical lens.The regular LIPSSs exhibited good properties as nanowires,with a resistivity almost equal to that of the initial ITO film.By changing the laser fluence,the nanowire resistances could be tuned from 15 to 73 kΩ/mm with a consistency of±10%.Furthermore,the average transmittance of the ITO films with regular LIPSSs in the range of 1200-2000 nm was improved from 21%to 60%.The regular LIPSS is promising for transparent electrodes of nano-optoelectronic devices-particularly in the near-infrared band.展开更多
Acetabular cups,which are among themost important implants in total hip arthroplasty,are usually made from titanium alloys with high porosity and adequate mechanical properties.The current three-dimensional(3D)printin...Acetabular cups,which are among themost important implants in total hip arthroplasty,are usually made from titanium alloys with high porosity and adequate mechanical properties.The current three-dimensional(3D)printing approaches to fabricate customized acetabular cups have some inherent disadvantages such as high cost and energy consumption,residual thermal stress,and relatively low efficiency.Thus,in this work,a direct ink writing method was developed to print a cup structure at room temperature,followed by multi-step heat treatment to form microscale porous structure within the acetabular cup.Our method is facilitated by the development of a self-supporting titanium-6 aluminum-4 vanadium(Ti64)ink that is composed of Ti64 particles,bentonite yield-stress additive,ultraviolet curable polymer,and photo-initiator.The effects of Ti64 and bentonite concentrations on the rheological properties and printability of inks were systematically investigated.Moreover,the printing conditions,geometrical limitations,and maximum curing depth were explored.Finally,some complex 3D structures,including lattices with different gap distances,honeycomb with a well-defined shape,and an acetabular cup with uniformly distributed micropores,were successfully printed/fabricated to validate the effectiveness of the proposed method.展开更多
Diverse natural organisms possess stimulus-responsive structures to adapt to the surrounding environment.Inspired by nature,researchers have developed various smart stimulus-responsive structures with adjustable prope...Diverse natural organisms possess stimulus-responsive structures to adapt to the surrounding environment.Inspired by nature,researchers have developed various smart stimulus-responsive structures with adjustable properties and functions to address the demands of ever-changing application environments that are becoming more intricate.Among many fabrication methods for stimulus-responsive structures,femtosecond laser direct writing(FsLDW)has received increasing attention because of its high precision,simplicity,true three-dimensional machining ability,and wide applicability to almost all materials.This paper systematically outlines state-of-the-art research on stimulus-responsive structures prepared by FsLDW.Based on the introduction of femtosecond laser-matter interaction and mainstream FsLDW-based manufacturing strategies,different stimulating factors that can trigger structural responses of prepared intelligent structures,such as magnetic field,light,temperature,pH,and humidity,are emphatically summarized.Various applications of functional structures with stimuli-responsive dynamic behaviors fabricated by FsLDW,as well as the present obstacles and forthcoming development opportunities,are discussed.展开更多
Direct ink writing(DIW)holds enormous potential in fabricating multiscale and multi-functional architectures by virtue of its wide range of printable materials,simple operation,and ease of rapid prototyping.Although i...Direct ink writing(DIW)holds enormous potential in fabricating multiscale and multi-functional architectures by virtue of its wide range of printable materials,simple operation,and ease of rapid prototyping.Although it is well known that ink rheology and processing parameters have a direct impact on the resolution and shape of the printed objects,the underlying mechanisms of these key factors on the printability and quality of DIW technique remain poorly understood.To tackle this issue,we systematically analyzed the printability and quality through extrusion mechanism modeling and experimental validating.Hybrid non-Newtonian fluid inks were first prepared,and their rheological properties were measured.Then,finite element analysis of the whole DIW process was conducted to reveal the flow dynamics of these inks.The obtained optimal process parameters(ink rheology,applied pressure,printing speed,etc)were also validated by experiments where high-resolution(<100μm)patterns were fabricated rapidly(>70 mm s^(-1)).Finally,as a process research demonstration,we printed a series of microstructures and circuit systems with hybrid inks and silver inks,showing the suitability of the printable process parameters.This study provides a strong quantitative illustration of the use of DIW for the high-speed preparation of high-resolution,high-precision samples.展开更多
A new laser direct writing system is introduced and the potential application of the diffractive optical elements (DOE’s) fabricated by applying laser direct writing system are presented. The fabrication techniques b...A new laser direct writing system is introduced and the potential application of the diffractive optical elements (DOE’s) fabricated by applying laser direct writing system are presented. The fabrication techniques by applying the laser direct writing are developed. Experimental results have been obtained by applying laser direct writing machine with line width of 5μm and 10μm.展开更多
The highly integrated and miniaturized next-generation electronic products call for high-performance electromagnetic interference(EMI)shielding materials to assure the normal operation of their closely assembled compo...The highly integrated and miniaturized next-generation electronic products call for high-performance electromagnetic interference(EMI)shielding materials to assure the normal operation of their closely assembled components.However,the most current techniques are not adequate for the fabrication of shielding materials with programmable structure and controllable shielding efficiency.Herein,we demonstrate the direct ink writing of robust and highly conductive Ti3C2Tx MXene frames with customizable structures by using MXene/AlOOH inks for tunable EMI shielding and electromagnetic wave-induced thermochromism applications.The as-printed frames are reinforced by immersing in AlCl_(3)/HCl solution to remove the electrically insulating AlOOH nanoparticles,as well as cross-link the MXene sheets and fuse the filament interfaces with aluminum ions.After freeze-drying,the resultant robust and porous MXene frames exhibit tunable EMI shielding efficiencies in the range of 25-80 dB with the highest electrical conductivity of 5323 S m−1.Furthermore,an electromagnetic wave-induced thermochromic MXene pattern is assembled by coating and curing with thermochromic polydimethylsiloxane on a printed MXene pattern,and its color can be changed from blue to red under the high-intensity electromagnetic irradiation.This work demonstrates a direct ink printing of customizable EMI frames and patterns for tuning EMI shielding efficiency and visualizing electromagnetic waves.展开更多
3D-Honeycombed CL-20 structures with low critical size of detonation have been fabricated successfully for intelligent weapon systems using a micro-flow direct ink writing(DIW) technology.The CL-20-based explosive ink...3D-Honeycombed CL-20 structures with low critical size of detonation have been fabricated successfully for intelligent weapon systems using a micro-flow direct ink writing(DIW) technology.The CL-20-based explosive ink for DIW technology was prepared by a two-component adhesive system with waterborne polyurethane(WPU) and ethyl cellulose(EC).Not only the preparation of the explosive ink but also the principle of DIW process have been investigated systematically.The explosive ink displayed stro ng shea rthinning behavior that permitted layer-by-laye r deposition from a fine nozzle onto a substrate to produce complex shapes.The EC content was varied to alter the pore structure distribution and rheological behavior of ink samples after curing.The deposited explosive composite materials are of a honeycombed structure with high porosity,and the pore size distribution increases with the increase of EC content.No phase change was observed during the preparation process.Both WPU and EC show good compatibility with CL-20 particles.Apparently high activation energy was realized in the CL-20-based composite ink compared with that of the refined CL-20 due to the presence of non-energetic but stable WPU.The detonation performance of the composite materials can be precisely controlled by an adjustment in the content of binders.The 3D honeyco mbed CL-20 structures,which are fabricated by DIW technology,have a very small critical detonation size of less than 69 μm,as demonstrated by wedge shaped charge test.The ink can be used to create 3D structures with complex geometries not possible with traditional manufacturing techniques,which presents a bright future for the development of intelligent weapon systems.展开更多
The booming development of DIW technology present an unprecedented prospect in energetic materials field and has attracted great interest due to its relative simplicity and high flexibility of manufacturing.Herein,a n...The booming development of DIW technology present an unprecedented prospect in energetic materials field and has attracted great interest due to its relative simplicity and high flexibility of manufacturing.Herein,a novel CL-20 based explosive ink formulation have been developed successfully for MEMS initiation systems via DIW technology.We designed PVA/GAP into an oil-in-water(O/W)emulsion,in the way that the aqueous solution of PVA as water phase,the ethyl acetate solution of GAP as oil phase,the combination of Tween 80 and SDS as emulsifier,BPS as a curing agent of GAP.The ideal formulation with good shear-thinning rheology properties and clear gel point was prepared using only 10 wt%emulsion.The dual-cured network formed during the curing process made the printed sample have good mechanical properties.The printed samples had satisfactory molding effect without cracks or fractures,the crystal form of CL-20 not changed and the thermal stability have improved.Deposition of explosive inks via DIW in micro-scale grooves had excellent detonation performances,which critical detonation size was 1×0.045 mm,detonation velocity was 7129 m/s and when the corner reaching 150°can still detonated stably.This study may open new avenues for developing binder systems in explosive ink formulations.展开更多
manufacturing of biomimetic micro/nanostructures due to its specific advantages including high precision,simplicity,and compatibility for diverse materials in comparison with other methods(e.g.ion etching,sol-gel proc...manufacturing of biomimetic micro/nanostructures due to its specific advantages including high precision,simplicity,and compatibility for diverse materials in comparison with other methods(e.g.ion etching,sol-gel process,chemical vapor deposition,template method,and self-assembly).These biomimetic micro/nanostructured surfaces are of significant interest for academic and industrial research due to their wide range of potential applications,including self-cleaning surfaces,oil-water separation,and fog collection.This review presents the inherent relationship between natural organisms,fabrication methods,micro/nanostructures and their potential applications.Thereafter,we throw a list of current fabrication strategies so as to highlight the advantages of FLDW in manufacturing bioinspired microstructured surfaces.Subsequently,we summarize a variety of typical bioinspired designs(e.g.lotus leaf,pitcher plant,rice leaf,butterfly wings,etc)for diverse multifunctional micro/nanostructures through extreme femtosecond laser processing technology.Based on the principle of interfacial chemistry and geometrical optics,we discuss the potential applications of these functional micro/nanostructures and assess the underlying challenges and opportunities in the extreme fabrication of bioinspired micro/nanostructures by FLDW.This review concludes with a follow up and an outlook of femtosecond laser processing in biomimetic domains.展开更多
Carbon nitride,an emerging polymeric semiconductor,has attracted attention in research ranging from photocatalysis to photodetection due to its favorable visible light response and high physicochemical stability.For i...Carbon nitride,an emerging polymeric semiconductor,has attracted attention in research ranging from photocatalysis to photodetection due to its favorable visible light response and high physicochemical stability.For its practical device application,the fabrication of high-quality carbon nitride films on substrates is essential.However,conventional methodologies to achieve high polymerization of carbon nitride are often accompanied by its decomposition,significantly compromising the film quality.Herein,we report an ultrafast fabrication of carbon nitride film by laser direct writing(LDW).The instantaneous high temperature and pressure during LDW can efficiently boost the polymerization of carbon nitride and suppress its decomposition,resulting in high-quality carbon nitride film with excellent mechanical stability with the substrate.Due to the efficient photon-to-electron conversion,it exhibits an outstanding photoelectrochemical water splitting and optoelectronic detection capability,even under strong acid/alkaline conditions.This study thus offers a facile and efficient LDW strategy for the rapid fabrication of carbon nitride film photoelectrodes,demonstrating its great feasibility in multifunctional photoelectrical applications,including but not limited to photoelectrochemical water splitting and optoelectronic detection.展开更多
Covalent adaptable network(CAN)polymers doped with conductive nanoparticles are an ideal candidate to create reshapeable,rehealable,and fully recyclable electronics.On the other hand,3D printing as a deterministic man...Covalent adaptable network(CAN)polymers doped with conductive nanoparticles are an ideal candidate to create reshapeable,rehealable,and fully recyclable electronics.On the other hand,3D printing as a deterministic manufacturing method has a significant potential to fabricate electronics with low cost and high design freedom.In this paper,we incorporate a conductive composite consisting of polyimine CAN and multi-wall carbon nanotubes into direct-ink-writing 3D printing to create polymeric sensors with outstanding reshaping,repairing,and recycling capabilities.The developed printable ink exhibits good printability,conductivity,and recyclability.The conductivity of printed polyimine composites is investigated at different temperatures and deformation strain levels.Their shape-reforming and Joule heating-induced interfacial welding effects are demonstrated and characterized.Finally,a temperature sensor is 3D printed with defined patterns of conductive pathways,which can be easily mounted onto 3D surfaces,repaired after damage,and recycled using solvents.The sensing capability of printed sensors is maintained after the repairing and recycling.Overall,the 3D printed reshapeable,rehealable,and recyclable sensors possess complex geometry and extend service life,which assist in the development of polymer-based electronics toward broad and sustainable applications.展开更多
Direct growth and patterning of atomically thin two-dimensional(2D)materials on various substrates are essential steps towards enabling their potential for use in the next generation of electronic and optoelectronic d...Direct growth and patterning of atomically thin two-dimensional(2D)materials on various substrates are essential steps towards enabling their potential for use in the next generation of electronic and optoelectronic devices.The conventional gas-phase growth techniques,however,are not compatible with direct patterning processes.Similarly,the condensed-phase methods,based on metal oxide deposition and chalcogenization processes,require lengthy processing times and high temperatures.Here,a novel self-limiting laser crystallization process for direct crystallization and patterning of 2D materials is demonstrated.It takes advantage of significant differences between the optical properties of the amorphous and crystalline phases.Pulsed laser deposition is used to deposit a thin layer of stoichiometric amorphous molybdenum disulfide(MoS2)film(∼3 nm)onto the fused silica substrates.A tunable nanosecond infrared(IR)laser(1064 nm)is then employed to couple a precise amount of power and number of pulses into the amorphous materials for controlled crystallization and direct writing processes.The IR laser interaction with the amorphous layer results in fast heating,crystallization,and/or evaporation of the materials within a narrow processing window.However,reduction of the midgap and defect states in the as crystallized layers decreases the laser coupling efficiency leading to higher tolerance to process parameters.The deliberate design of such laser 2D material interactions allows the selflimiting crystallization phenomena to occur with increased quality and a much broader processing window.This unique laser processing approach allows high-quality crystallization,direct writing,patterning,and the integration of various 2D materials into future functional devices.展开更多
Feedback plays a central role in writing development. However correcting students' writing is one of the most timeconsuming tasks for our senior English teachers. By conducting a survey of direct feedback and indi...Feedback plays a central role in writing development. However correcting students' writing is one of the most timeconsuming tasks for our senior English teachers. By conducting a survey of direct feedback and indirect feedback in students writing the author tries to test the influence of direct feedback and indirect feedback in graduates' writing.展开更多
A multi-layer interconnection structure is a basic component of electronic devices, and printing of the multi-layer interconnection structure is the key process in printed electronics. In this work, electrohydrodynami...A multi-layer interconnection structure is a basic component of electronic devices, and printing of the multi-layer interconnection structure is the key process in printed electronics. In this work, electrohydrodynamic direct-writing (EDW) is utilized to print the conductor-insulator--conductor multi-layer ~nterconne^ction structure. Silver ink is chosen to print the conductor pattern, and a polyvinylpyrrolidone (PVP) solution is util^zed to f^bricate the insulator layer between the bottom and top conductor patterns. The influences of EDW process parameters on the line width of the printed conductor and insulator patterns are studied systematically. The obtained ~es^l~s show that the line width of the printed structure increases with the increase of the flow rate, but decreases with the increase of applied voltage and PVP content in the solution. The average resistivity values of the bottom and top silver conductor tracks are determined to be 1.34 × 10-7 Ω.m and 1.39×10-7 Ω.m, respectively. The printed PVP layer between the two conductor tracks is well insulated, which can meet the insulation requirement of the electronic devices. This study offers an alternative, fast, and cost-effective method of fabricating conductor-insulator-conductor multi-layer interconnections in the electronic industry.展开更多
Pulsed Nd:YAG laser was used to irradiate Si substrate immersed in AgNO3 ethylene glycol solution to deposit Ag films along the lines scanned by laser on the substrate, which is a photo-thermal decomposing process. Th...Pulsed Nd:YAG laser was used to irradiate Si substrate immersed in AgNO3 ethylene glycol solution to deposit Ag films along the lines scanned by laser on the substrate, which is a photo-thermal decomposing process. The decomposed Ag atoms congregate and form polycrystalline Ag particles. The Ag concentration changes greatly with the total laser energyA absorbed by substrate. Transmission electron microscopy (TEM) observation shows the Ag particles are inlaid in the Si substrate. Auger electron spectrum (AES) shows that the Ag concentration decreases with the increase of the sputtering depth, and there is no oxygen element on the surface of the deposited Ag films.展开更多
Microwave absorption in radar stealth technology is faced with challenges in terms of its effectiveness in low-frequency regions.Herein,we report a new laser-based method for producing an ultrawideband metamaterial-ba...Microwave absorption in radar stealth technology is faced with challenges in terms of its effectiveness in low-frequency regions.Herein,we report a new laser-based method for producing an ultrawideband metamaterial-based microwave absorber with a highly uniform sheet resistance and negative magnetic permeability at resonant frequencies,which results in a wide bandwidth in the L-to S-band.Control of the electrical sheet resistance uniformity has been achieved with less than 5%deviation at 400Ωsq^(-1)and 6%deviation at 120Ωsq^(-1),resulting in a microwave absorption coefficient between 97.2%and 97.7%within a1.56–18.3 GHz bandwidth for incident angles of 0°–40°,and there is no need for providing energy or an electrical power source during the operation.Porous N-and S-doped turbostratic graphene 2D patterns with embedded magnetic nanoparticles were produced simultaneously on a polyethylene terephthalate substrate via laser direct writing.The proposed low-frequency,wideband,wide-incident-angle,and high-electromagnetic-absorption microwave absorber can potentially be used in aviation,electromagnetic interference(EMI)suppression,and 5G applications.展开更多
基金Supported by the National Natural Science Foundation of China(No. 50105008)the Specialized Research Fund for the Doctoral Program of Higher Education of MOE, P.R.C. (No. 20050003046)
文摘Scaffolds require individual external shape and well-defined internal structure, which is of great importance for tissue engineering. Rapid prototyping (RP) uses layer-manufacturing strategies to create physical objects and has the advantage on scaffold fabrication. A new RP technology called aerodynamically assisted tip-pen direct writing was developed to construct the complex architectures. Compared with the traditional nozzle, the new nozzle has a micro-tip in the center of the micro-hole. The flow is determined by the gap between the micro-hole and micro-tip, which makes it practical for more accurate flow control. A highly accurate three-dimensional (3-D) micro-positioning system was employed with the new nozzle to deposit maltose structures. 3-D architectures had been made by this method, the width of fiber in which is about 120 μm. The results show that this method provides a possibility to construct 3-D scaffolds with tissue-scale features (i.e., 10-100 μm) without bad influence on the biological activities.
基金This study was supported by the National Natural Science Foundation of China (52105593 and 62271439)STI 2030 —Major Projects(2022ZD0208601)the “Pioneer” and “Leading Goose” R&D Program of Zhejiang (2023C01051)。
文摘Flexible and wearable humidity sensors play a vital role in daily point-of-care diagnosis and noncontact human-machine interactions.However,achieving a facile and high-speed fabrication approach to realizing flexible humidity sensors remains a challenge.In this work,a wearable capacitive-type Ga_(2)O_(3)/liquid metal-based humidity sensor is demonstrated by a one-step laser direct writing technique.Owing to the photothermal effect of laser,the Ga_(2)O_(3)-wrapped liquid metal particles can be selectively sintered and converted from insulative to conductive traces with a resistivity of 0.19Ω·cm,while the untreated regions serve as active sensing layers in response to moisture changes.Under 95%relative humidity,the humidity sensor displays a highly stable performance along with rapid response and recover time.Utilizing these superior properties,the Ga_(2)O_(3)/liquid metal-based humidity sensor is able to monitor human respiration rate,as well as skin moisture of the palm under different physiological states for healthcare monitoring.
基金We are grateful for financial supports from the Ministry of Science and Technology of China(Grant No.2021YFA1401100)National Natural Science Foundation of China(Grant Nos.12074123,11804227,91950112),and the Foundation of‘Manufacturing beyond limits’of Shanghai.
文摘This paper reports the fabrication of regular large-area laser-induced periodic surface structures(LIPSSs)in indium tin oxide(ITO)films via femtosecond laser direct writing focused by a cylindrical lens.The regular LIPSSs exhibited good properties as nanowires,with a resistivity almost equal to that of the initial ITO film.By changing the laser fluence,the nanowire resistances could be tuned from 15 to 73 kΩ/mm with a consistency of±10%.Furthermore,the average transmittance of the ITO films with regular LIPSSs in the range of 1200-2000 nm was improved from 21%to 60%.The regular LIPSS is promising for transparent electrodes of nano-optoelectronic devices-particularly in the near-infrared band.
基金supported by the Micro Grant (PG20473) at the University of Nevada, Reno, USA
文摘Acetabular cups,which are among themost important implants in total hip arthroplasty,are usually made from titanium alloys with high porosity and adequate mechanical properties.The current three-dimensional(3D)printing approaches to fabricate customized acetabular cups have some inherent disadvantages such as high cost and energy consumption,residual thermal stress,and relatively low efficiency.Thus,in this work,a direct ink writing method was developed to print a cup structure at room temperature,followed by multi-step heat treatment to form microscale porous structure within the acetabular cup.Our method is facilitated by the development of a self-supporting titanium-6 aluminum-4 vanadium(Ti64)ink that is composed of Ti64 particles,bentonite yield-stress additive,ultraviolet curable polymer,and photo-initiator.The effects of Ti64 and bentonite concentrations on the rheological properties and printability of inks were systematically investigated.Moreover,the printing conditions,geometrical limitations,and maximum curing depth were explored.Finally,some complex 3D structures,including lattices with different gap distances,honeycomb with a well-defined shape,and an acetabular cup with uniformly distributed micropores,were successfully printed/fabricated to validate the effectiveness of the proposed method.
基金supported by the National Natural Science Foundation of China (Nos. 52122511, 52105492, and 62005262)the National Key Research and Development Program of China (No. 2021YFF0502700)+2 种基金the Students’ Innovation and Entrepreneurship Foundation of USTC (Nos. CY2022G32 and XY2022G02CY)the USTC Research Funds of the Double First-Class Initiative (No. YD2340002009)CAS Project for Young Scientists in Basic Research (No. YSBR-049)
文摘Diverse natural organisms possess stimulus-responsive structures to adapt to the surrounding environment.Inspired by nature,researchers have developed various smart stimulus-responsive structures with adjustable properties and functions to address the demands of ever-changing application environments that are becoming more intricate.Among many fabrication methods for stimulus-responsive structures,femtosecond laser direct writing(FsLDW)has received increasing attention because of its high precision,simplicity,true three-dimensional machining ability,and wide applicability to almost all materials.This paper systematically outlines state-of-the-art research on stimulus-responsive structures prepared by FsLDW.Based on the introduction of femtosecond laser-matter interaction and mainstream FsLDW-based manufacturing strategies,different stimulating factors that can trigger structural responses of prepared intelligent structures,such as magnetic field,light,temperature,pH,and humidity,are emphatically summarized.Various applications of functional structures with stimuli-responsive dynamic behaviors fabricated by FsLDW,as well as the present obstacles and forthcoming development opportunities,are discussed.
基金supported by National Natural Science Foundation of China(Nos.52188102,U2013213,51820105008)the Technology Innovation Project of Hubei Province of China under Grant No.2019AEA171+1 种基金The project of introducing innovative leading talents in Songshan Lake High-tech Zone,Dongguan City,Guangdong Province(No.2019342101RSFJ-G)the support from Flexible Electronics Research Center of HUST for providing experiment facility。
文摘Direct ink writing(DIW)holds enormous potential in fabricating multiscale and multi-functional architectures by virtue of its wide range of printable materials,simple operation,and ease of rapid prototyping.Although it is well known that ink rheology and processing parameters have a direct impact on the resolution and shape of the printed objects,the underlying mechanisms of these key factors on the printability and quality of DIW technique remain poorly understood.To tackle this issue,we systematically analyzed the printability and quality through extrusion mechanism modeling and experimental validating.Hybrid non-Newtonian fluid inks were first prepared,and their rheological properties were measured.Then,finite element analysis of the whole DIW process was conducted to reveal the flow dynamics of these inks.The obtained optimal process parameters(ink rheology,applied pressure,printing speed,etc)were also validated by experiments where high-resolution(<100μm)patterns were fabricated rapidly(>70 mm s^(-1)).Finally,as a process research demonstration,we printed a series of microstructures and circuit systems with hybrid inks and silver inks,showing the suitability of the printable process parameters.This study provides a strong quantitative illustration of the use of DIW for the high-speed preparation of high-resolution,high-precision samples.
文摘A new laser direct writing system is introduced and the potential application of the diffractive optical elements (DOE’s) fabricated by applying laser direct writing system are presented. The fabrication techniques by applying the laser direct writing are developed. Experimental results have been obtained by applying laser direct writing machine with line width of 5μm and 10μm.
基金support from the National Natural Science Foundation of China(51922020,52090034)the Fundamental Research Funds for the Central Universities(BHYC1707B)。
文摘The highly integrated and miniaturized next-generation electronic products call for high-performance electromagnetic interference(EMI)shielding materials to assure the normal operation of their closely assembled components.However,the most current techniques are not adequate for the fabrication of shielding materials with programmable structure and controllable shielding efficiency.Herein,we demonstrate the direct ink writing of robust and highly conductive Ti3C2Tx MXene frames with customizable structures by using MXene/AlOOH inks for tunable EMI shielding and electromagnetic wave-induced thermochromism applications.The as-printed frames are reinforced by immersing in AlCl_(3)/HCl solution to remove the electrically insulating AlOOH nanoparticles,as well as cross-link the MXene sheets and fuse the filament interfaces with aluminum ions.After freeze-drying,the resultant robust and porous MXene frames exhibit tunable EMI shielding efficiencies in the range of 25-80 dB with the highest electrical conductivity of 5323 S m−1.Furthermore,an electromagnetic wave-induced thermochromic MXene pattern is assembled by coating and curing with thermochromic polydimethylsiloxane on a printed MXene pattern,and its color can be changed from blue to red under the high-intensity electromagnetic irradiation.This work demonstrates a direct ink printing of customizable EMI frames and patterns for tuning EMI shielding efficiency and visualizing electromagnetic waves.
基金This research work was financially supported by the Advantage Disciplines Climbing Plan of Shanxi Province and Graduate Education Innovation Project in Shanxi Province(2016BY119).
文摘3D-Honeycombed CL-20 structures with low critical size of detonation have been fabricated successfully for intelligent weapon systems using a micro-flow direct ink writing(DIW) technology.The CL-20-based explosive ink for DIW technology was prepared by a two-component adhesive system with waterborne polyurethane(WPU) and ethyl cellulose(EC).Not only the preparation of the explosive ink but also the principle of DIW process have been investigated systematically.The explosive ink displayed stro ng shea rthinning behavior that permitted layer-by-laye r deposition from a fine nozzle onto a substrate to produce complex shapes.The EC content was varied to alter the pore structure distribution and rheological behavior of ink samples after curing.The deposited explosive composite materials are of a honeycombed structure with high porosity,and the pore size distribution increases with the increase of EC content.No phase change was observed during the preparation process.Both WPU and EC show good compatibility with CL-20 particles.Apparently high activation energy was realized in the CL-20-based composite ink compared with that of the refined CL-20 due to the presence of non-energetic but stable WPU.The detonation performance of the composite materials can be precisely controlled by an adjustment in the content of binders.The 3D honeyco mbed CL-20 structures,which are fabricated by DIW technology,have a very small critical detonation size of less than 69 μm,as demonstrated by wedge shaped charge test.The ink can be used to create 3D structures with complex geometries not possible with traditional manufacturing techniques,which presents a bright future for the development of intelligent weapon systems.
基金This work was supported by the Graduate Education Innovation Project of Shanxi Province(2020SY401)No.55 Research Institute of China North Industries Group Corporation Open Innovation Fund(WDZC2020JJ017).
文摘The booming development of DIW technology present an unprecedented prospect in energetic materials field and has attracted great interest due to its relative simplicity and high flexibility of manufacturing.Herein,a novel CL-20 based explosive ink formulation have been developed successfully for MEMS initiation systems via DIW technology.We designed PVA/GAP into an oil-in-water(O/W)emulsion,in the way that the aqueous solution of PVA as water phase,the ethyl acetate solution of GAP as oil phase,the combination of Tween 80 and SDS as emulsifier,BPS as a curing agent of GAP.The ideal formulation with good shear-thinning rheology properties and clear gel point was prepared using only 10 wt%emulsion.The dual-cured network formed during the curing process made the printed sample have good mechanical properties.The printed samples had satisfactory molding effect without cracks or fractures,the crystal form of CL-20 not changed and the thermal stability have improved.Deposition of explosive inks via DIW in micro-scale grooves had excellent detonation performances,which critical detonation size was 1×0.045 mm,detonation velocity was 7129 m/s and when the corner reaching 150°can still detonated stably.This study may open new avenues for developing binder systems in explosive ink formulations.
基金The present work was supported by the National Natural Science Foundation of China(51805508)the Key Project of Equipment Pre-Research Field Fund of China(61409230310)and the Fundamental Research Funds for the Central Universities(WK2090090025).
文摘manufacturing of biomimetic micro/nanostructures due to its specific advantages including high precision,simplicity,and compatibility for diverse materials in comparison with other methods(e.g.ion etching,sol-gel process,chemical vapor deposition,template method,and self-assembly).These biomimetic micro/nanostructured surfaces are of significant interest for academic and industrial research due to their wide range of potential applications,including self-cleaning surfaces,oil-water separation,and fog collection.This review presents the inherent relationship between natural organisms,fabrication methods,micro/nanostructures and their potential applications.Thereafter,we throw a list of current fabrication strategies so as to highlight the advantages of FLDW in manufacturing bioinspired microstructured surfaces.Subsequently,we summarize a variety of typical bioinspired designs(e.g.lotus leaf,pitcher plant,rice leaf,butterfly wings,etc)for diverse multifunctional micro/nanostructures through extreme femtosecond laser processing technology.Based on the principle of interfacial chemistry and geometrical optics,we discuss the potential applications of these functional micro/nanostructures and assess the underlying challenges and opportunities in the extreme fabrication of bioinspired micro/nanostructures by FLDW.This review concludes with a follow up and an outlook of femtosecond laser processing in biomimetic domains.
基金Australian Research Council,Grant/Award Number:DP200100365National Natural Science Foundation of China,Grant/Award Numbers:21905144,21905202,22002107,22179093+1 种基金Qinghai Provincial Department of Science and Technology,Grant/Award Number:2021-zj-702Tianjin University,Grant/Award Number:2021XZC-0052。
文摘Carbon nitride,an emerging polymeric semiconductor,has attracted attention in research ranging from photocatalysis to photodetection due to its favorable visible light response and high physicochemical stability.For its practical device application,the fabrication of high-quality carbon nitride films on substrates is essential.However,conventional methodologies to achieve high polymerization of carbon nitride are often accompanied by its decomposition,significantly compromising the film quality.Herein,we report an ultrafast fabrication of carbon nitride film by laser direct writing(LDW).The instantaneous high temperature and pressure during LDW can efficiently boost the polymerization of carbon nitride and suppress its decomposition,resulting in high-quality carbon nitride film with excellent mechanical stability with the substrate.Due to the efficient photon-to-electron conversion,it exhibits an outstanding photoelectrochemical water splitting and optoelectronic detection capability,even under strong acid/alkaline conditions.This study thus offers a facile and efficient LDW strategy for the rapid fabrication of carbon nitride film photoelectrodes,demonstrating its great feasibility in multifunctional photoelectrical applications,including but not limited to photoelectrochemical water splitting and optoelectronic detection.
基金support from the National Science Foundation(Grant CMMI-1901807)。
文摘Covalent adaptable network(CAN)polymers doped with conductive nanoparticles are an ideal candidate to create reshapeable,rehealable,and fully recyclable electronics.On the other hand,3D printing as a deterministic manufacturing method has a significant potential to fabricate electronics with low cost and high design freedom.In this paper,we incorporate a conductive composite consisting of polyimine CAN and multi-wall carbon nanotubes into direct-ink-writing 3D printing to create polymeric sensors with outstanding reshaping,repairing,and recycling capabilities.The developed printable ink exhibits good printability,conductivity,and recyclability.The conductivity of printed polyimine composites is investigated at different temperatures and deformation strain levels.Their shape-reforming and Joule heating-induced interfacial welding effects are demonstrated and characterized.Finally,a temperature sensor is 3D printed with defined patterns of conductive pathways,which can be easily mounted onto 3D surfaces,repaired after damage,and recycled using solvents.The sensing capability of printed sensors is maintained after the repairing and recycling.Overall,the 3D printed reshapeable,rehealable,and recyclable sensors possess complex geometry and extend service life,which assist in the development of polymer-based electronics toward broad and sustainable applications.
基金This work is supported by the Intermural Grant Program(IGP)at Auburn University.
文摘Direct growth and patterning of atomically thin two-dimensional(2D)materials on various substrates are essential steps towards enabling their potential for use in the next generation of electronic and optoelectronic devices.The conventional gas-phase growth techniques,however,are not compatible with direct patterning processes.Similarly,the condensed-phase methods,based on metal oxide deposition and chalcogenization processes,require lengthy processing times and high temperatures.Here,a novel self-limiting laser crystallization process for direct crystallization and patterning of 2D materials is demonstrated.It takes advantage of significant differences between the optical properties of the amorphous and crystalline phases.Pulsed laser deposition is used to deposit a thin layer of stoichiometric amorphous molybdenum disulfide(MoS2)film(∼3 nm)onto the fused silica substrates.A tunable nanosecond infrared(IR)laser(1064 nm)is then employed to couple a precise amount of power and number of pulses into the amorphous materials for controlled crystallization and direct writing processes.The IR laser interaction with the amorphous layer results in fast heating,crystallization,and/or evaporation of the materials within a narrow processing window.However,reduction of the midgap and defect states in the as crystallized layers decreases the laser coupling efficiency leading to higher tolerance to process parameters.The deliberate design of such laser 2D material interactions allows the selflimiting crystallization phenomena to occur with increased quality and a much broader processing window.This unique laser processing approach allows high-quality crystallization,direct writing,patterning,and the integration of various 2D materials into future functional devices.
文摘Feedback plays a central role in writing development. However correcting students' writing is one of the most timeconsuming tasks for our senior English teachers. By conducting a survey of direct feedback and indirect feedback in students writing the author tries to test the influence of direct feedback and indirect feedback in graduates' writing.
基金supported by the Key Program of the National Natural Science Foundation of China(Grant No.51035002)the National Natural Science Foundation of China(Grant No.51305373)the Specialized Research Fund for the Doctoral Program of Higher Education of China(Grant No.20120121120035)
文摘A multi-layer interconnection structure is a basic component of electronic devices, and printing of the multi-layer interconnection structure is the key process in printed electronics. In this work, electrohydrodynamic direct-writing (EDW) is utilized to print the conductor-insulator--conductor multi-layer ~nterconne^ction structure. Silver ink is chosen to print the conductor pattern, and a polyvinylpyrrolidone (PVP) solution is util^zed to f^bricate the insulator layer between the bottom and top conductor patterns. The influences of EDW process parameters on the line width of the printed conductor and insulator patterns are studied systematically. The obtained ~es^l~s show that the line width of the printed structure increases with the increase of the flow rate, but decreases with the increase of applied voltage and PVP content in the solution. The average resistivity values of the bottom and top silver conductor tracks are determined to be 1.34 × 10-7 Ω.m and 1.39×10-7 Ω.m, respectively. The printed PVP layer between the two conductor tracks is well insulated, which can meet the insulation requirement of the electronic devices. This study offers an alternative, fast, and cost-effective method of fabricating conductor-insulator-conductor multi-layer interconnections in the electronic industry.
基金This work was financially supported by the special funds for the major basic research projects(No.G2000067205-4).
文摘Pulsed Nd:YAG laser was used to irradiate Si substrate immersed in AgNO3 ethylene glycol solution to deposit Ag films along the lines scanned by laser on the substrate, which is a photo-thermal decomposing process. The decomposed Ag atoms congregate and form polycrystalline Ag particles. The Ag concentration changes greatly with the total laser energyA absorbed by substrate. Transmission electron microscopy (TEM) observation shows the Ag particles are inlaid in the Si substrate. Auger electron spectrum (AES) shows that the Ag concentration decreases with the increase of the sputtering depth, and there is no oxygen element on the surface of the deposited Ag films.
文摘Microwave absorption in radar stealth technology is faced with challenges in terms of its effectiveness in low-frequency regions.Herein,we report a new laser-based method for producing an ultrawideband metamaterial-based microwave absorber with a highly uniform sheet resistance and negative magnetic permeability at resonant frequencies,which results in a wide bandwidth in the L-to S-band.Control of the electrical sheet resistance uniformity has been achieved with less than 5%deviation at 400Ωsq^(-1)and 6%deviation at 120Ωsq^(-1),resulting in a microwave absorption coefficient between 97.2%and 97.7%within a1.56–18.3 GHz bandwidth for incident angles of 0°–40°,and there is no need for providing energy or an electrical power source during the operation.Porous N-and S-doped turbostratic graphene 2D patterns with embedded magnetic nanoparticles were produced simultaneously on a polyethylene terephthalate substrate via laser direct writing.The proposed low-frequency,wideband,wide-incident-angle,and high-electromagnetic-absorption microwave absorber can potentially be used in aviation,electromagnetic interference(EMI)suppression,and 5G applications.