The physical and mechanical properties of metal matrix composites were improved by the addition of reinforcements. The mechanical properties of particulate-reinforced metal-matrix composites based on aluminium alloys ...The physical and mechanical properties of metal matrix composites were improved by the addition of reinforcements. The mechanical properties of particulate-reinforced metal-matrix composites based on aluminium alloys （6061 and 7015） at high temperatures were studied. Titanium diboride （TiB2） particles were used as the reinforcement. All the composites were produced by hot extrusion. The tensile properties and fracture characteristics of these materials were investigated at room temperature and at high temperatures to determine their ultimate strength and strain to failure. The fracture surface was analysed by scanning electron microscopy. TiB2 particles provide high stability of the alumin- ium alloys （6061 and 7015） in the fabrication process. An improvement in the mechanical behaviour was achieved by adding TiB2 particles as reinforcement in both the aluminium alloys. Adding TiB2 particles reduces the ductility of the aluminium alloys but does not change the microscopic mode of failure, and the fracture surface exhibits a ductile appearance with dimples formed by coalescence.展开更多
Titanium diboride was calculated by the density function and discrete variational (DFT-DVM) method to study the relation between structure and properties.Titanium and its first-nearest boron atoms form a strong covale...Titanium diboride was calculated by the density function and discrete variational (DFT-DVM) method to study the relation between structure and properties.Titanium and its first-nearest boron atoms form a strong covalent bond,so TiB 2 has high melting point,hardness and chemical stability.Titanium atom releases two electrons to form Ti 2+ ions,and a boron atom gets one electron to come into B- ion.B- takes the sp2 hybrid and forms σ bonds to link other boron atoms in the same layer.The other one 2p z orbital of every B- ion in the same layer interacts each other to form the π molecular orbital,so TiB 2 has fine electrical property.The calculated density of state is close to the result of XPS experiment of TiB 2.Mainly Ti3d and B2p atomic orbitals contribute the total DOS near the Fermi level.展开更多
In order to improve the lifespan of spot-welding electrodes used for welding zinc coated steel sheets, titanium diboride was deposited onto their surface after precoating nickel as an intermediate layer. The microstru...In order to improve the lifespan of spot-welding electrodes used for welding zinc coated steel sheets, titanium diboride was deposited onto their surface after precoating nickel as an intermediate layer. The microstructures and phase compositions of TiB2 and Ni coatings were characterized by SEM and XRD. The coating hardness was measured using a microhardness tester. The results indicate that a satisfactory TiB2 coating is obtained as a result of the intermediate nickel layer acting as a good binder between the TiB2 coating and the copper alloy substrate. Owing to its capacity of deforming, the precoated nickel layer is dense and crack free, while cracks and pores are observed in the TiB2 coating. The hardness of the TiB2/Ni coating decreases with the increase of voltage and capacitance because of the diffusion of copper and nickel and the oxidation of the coating materials. Because of the good thermal and electrical conductivities and high hardness properties of TiB2, the deformation of the electrode with TiB2/Ni coating is reduced and its spot-welding life is by far prolonged than that of the uncoated one.展开更多
文摘The physical and mechanical properties of metal matrix composites were improved by the addition of reinforcements. The mechanical properties of particulate-reinforced metal-matrix composites based on aluminium alloys （6061 and 7015） at high temperatures were studied. Titanium diboride （TiB2） particles were used as the reinforcement. All the composites were produced by hot extrusion. The tensile properties and fracture characteristics of these materials were investigated at room temperature and at high temperatures to determine their ultimate strength and strain to failure. The fracture surface was analysed by scanning electron microscopy. TiB2 particles provide high stability of the alumin- ium alloys （6061 and 7015） in the fabrication process. An improvement in the mechanical behaviour was achieved by adding TiB2 particles as reinforcement in both the aluminium alloys. Adding TiB2 particles reduces the ductility of the aluminium alloys but does not change the microscopic mode of failure, and the fracture surface exhibits a ductile appearance with dimples formed by coalescence.
文摘Titanium diboride was calculated by the density function and discrete variational (DFT-DVM) method to study the relation between structure and properties.Titanium and its first-nearest boron atoms form a strong covalent bond,so TiB 2 has high melting point,hardness and chemical stability.Titanium atom releases two electrons to form Ti 2+ ions,and a boron atom gets one electron to come into B- ion.B- takes the sp2 hybrid and forms σ bonds to link other boron atoms in the same layer.The other one 2p z orbital of every B- ion in the same layer interacts each other to form the π molecular orbital,so TiB 2 has fine electrical property.The calculated density of state is close to the result of XPS experiment of TiB 2.Mainly Ti3d and B2p atomic orbitals contribute the total DOS near the Fermi level.
基金Project (50575069) supported by the National Natural Science Foundation of China
文摘In order to improve the lifespan of spot-welding electrodes used for welding zinc coated steel sheets, titanium diboride was deposited onto their surface after precoating nickel as an intermediate layer. The microstructures and phase compositions of TiB2 and Ni coatings were characterized by SEM and XRD. The coating hardness was measured using a microhardness tester. The results indicate that a satisfactory TiB2 coating is obtained as a result of the intermediate nickel layer acting as a good binder between the TiB2 coating and the copper alloy substrate. Owing to its capacity of deforming, the precoated nickel layer is dense and crack free, while cracks and pores are observed in the TiB2 coating. The hardness of the TiB2/Ni coating decreases with the increase of voltage and capacitance because of the diffusion of copper and nickel and the oxidation of the coating materials. Because of the good thermal and electrical conductivities and high hardness properties of TiB2, the deformation of the electrode with TiB2/Ni coating is reduced and its spot-welding life is by far prolonged than that of the uncoated one.
