The sonocatalytic damage of bovine serum albumin （BSA） was studied in the presence of nanometer titanium dioxide （TiO2） powders by low frequency （80 kHz） ultrasound. The destruction of secondary structure and ch...The sonocatalytic damage of bovine serum albumin （BSA） was studied in the presence of nanometer titanium dioxide （TiO2） powders by low frequency （80 kHz） ultrasound. The destruction of secondary structure and change of α-helical structure of BSA were reflected by ultraviolet （UV） and circular dichroism （CD） spectroscopies.展开更多
The Dye Sensitized Solar Cell (DSSC) plays an important role because of low material cost, ease of production and high conversion efficiency as compared to other thin-film solar cell technologies. The main objective i...The Dye Sensitized Solar Cell (DSSC) plays an important role because of low material cost, ease of production and high conversion efficiency as compared to other thin-film solar cell technologies. The main objective is to create and find the best configuration of the solar cell based on materials that are inexpensive and highly efficient in solar energy conversion and subsequently test the efficiency of dye sensitized titanium dioxide solar cell. We begin the process with two glass plates coated with Fluorine tin oxide (FTO). Titanium dioxide is applied to the conductive side of one plate and the other plate is coated with graphite. A dye is adsorbed on to the TiO2 layer and then the plates are sandwiched together. A drop of iodide electrolyte is then added between the plates. The tests carried out indoors under a lamp emitting all wavelengths in the visible spectrum were not found to provide consistent data due to substantial heating of the cell. The outdoor tests carried out in natural sunlight exhibited steady voltage at much higher level. Future research will involve the incorporation of quantum dots instead of the organic dye as a sensitizer. Quantum dots have the advantages of providing tunable band gaps and the ability to absorb specific wavelength.展开更多
Titanium is a very important element for several industrial applications, being one of the ninth most abundant elements in the Earth’s crust (0.63% wt). In this work it will discuss the different mining and industria...Titanium is a very important element for several industrial applications, being one of the ninth most abundant elements in the Earth’s crust (0.63% wt). In this work it will discuss the different mining and industrial activities involved in the production of titanium dioxide. The first step analyzed will treat about the beneficiation mining process of titanium mineral, and secondly, it will discuss the two main processes of the TiO2 manufacturing (sulphate and chloride routes). In addition, we will show different uses of the titanium dioxide pigment as filler in paper, plastics and rubber industries and as flux in glass manufacture, etc. Finally, we will show that the old wastes are currently called co-products since they were valorized, being commercialized by the Spanish industry of TiO2 production in different fields such as agriculture, civil engineering, or cement manufacturing.展开更多
In this work we have developed an analytical method to measure potential titanium debris released from TiO2 nanotube layers devices immersed in biological fluids. This quantitative study is highly required to ensure b...In this work we have developed an analytical method to measure potential titanium debris released from TiO2 nanotube layers devices immersed in biological fluids. This quantitative study is highly required to ensure both the security and non toxicity of the nanostructured surfaces used as future implantable medical devices in the living. A one-pot synthesis process is developed to produce high quality standard solutions of titanium dioxide nanoparticles in aqueous medium. The elaborated dispersion is then used to fabricate standard solutions in both aqueous and human blood plasma media. The synthesized nanoparticles dispersion was characterized by granulometry. The nanoparticles structure and morphology were then observed using Transmission Electron Microscopy (TEM). Thermogravimetric Analysis (TGA) was used to evaluate the concentration of TiO2 in the suspension. A quantitative routine by the use of Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) is developed. The quantification threshold of titanium species is found to be in the 30 - 40 ppb range. None interference is detected between the particles and the human blood plasma. Using the established quantitative routine, the titanium species release from titania nanotube layers in human blood plasma is evaluated.展开更多
Hydrogen(H2)production from photocatalytic reforming of cellulose is a promising way for sustainable H2 to be generated.Herein,we report a systematic study of the photocatalytic reforming of cellulose over Pt/m-TiO2(i...Hydrogen(H2)production from photocatalytic reforming of cellulose is a promising way for sustainable H2 to be generated.Herein,we report a systematic study of the photocatalytic reforming of cellulose over Pt/m-TiO2(i.e.mixed TiO2,80%of anatase and 20%of rutile)catalysts in water.The optimum operation condition was established by studying the effect of Pt loading,catalyst concentration,cellulose concentration and reaction temperature on the gas production rate of H2(r(H2))and CO2(r(CO2)),suggesting an optimum operation condition at 40°C with 1.0 g·L^-1of cellulose and 0.75 g·L^-1of 0.16-Pt/m-TiO2 catalyst(with 0.16 wt%Pt loadting)to achieve a relatively sound photocatalytic performance with rH2=9.95μmol·h^-1.It is also shown that although the photoreforming of cellulose was operated at a relatively mild condition(i.e.with an UV-A lamp irradiation at40°C in the aqueous system),a low loading of Pt at^0.16 wt%on m-TiO2 could promote the H2 production effectively.Additionally,by comparing the reaction order expressed from both r(H2)(a1)and r(CO2)(a2)with respect to cellulose and water,the possible mechanism of H2 production was proposed.展开更多
Corrosion protection has become an important issue as the amount of infrastructure construction in marine environment increased.Photocathodic protection is a promising method to reduce the corrosion of metals,and tita...Corrosion protection has become an important issue as the amount of infrastructure construction in marine environment increased.Photocathodic protection is a promising method to reduce the corrosion of metals,and titanium dioxide(TiO2) is the most widely used photoanode.This review summarizes the progress in TiO2 photo gene rated protection in recent years.Different types of semiconductors,including sulfides,metals,metal oxide s,polymers,and other materials,are used to design and modify TiO2.The strategy to dramatically improve the efficiency of photoactivity is proposed,and the mechanism is investigated in detail.Characterization methods are also introduced,including morphology testing,light absorption,photoelectrochemistry,and protected metal observation.This review aims to provide a comprehensive overview of Ti02 development and guide photocathodic protection.展开更多
This research work aims to reduce the band gap of thin layers of titanium oxide by the incorporation of graphene oxide sheets. Thin layers of the TiO2-GO composites were prepared on a glass substrate by the spin-coati...This research work aims to reduce the band gap of thin layers of titanium oxide by the incorporation of graphene oxide sheets. Thin layers of the TiO2-GO composites were prepared on a glass substrate by the spin-coating technique from GO and an aqueous solution of TiO2. A significant decrease in optical band gap was observed at the TiO2-GO compound compared to that of pure TiO2. Samples as prepared were characterized using XRD, SEM and UV-visible spectra. XRD analysis revealed the amorphous nature of the deposited layers. Scanning electron microscope reveals the dispersion of graphene nanofiles among titanium oxide nanoparticles distributed at the surface with an almost uniform size distribution. The band gap has been calculated and is around 2 eV after incorporation of Graphene oxide. The chemical bond C-Ti between the titanium oxide and graphene sheets is at the origin of this reduction.展开更多
基金We greatly acknowledge the National Natural Science Foundation of China for financial support.
文摘The sonocatalytic damage of bovine serum albumin （BSA） was studied in the presence of nanometer titanium dioxide （TiO2） powders by low frequency （80 kHz） ultrasound. The destruction of secondary structure and change of α-helical structure of BSA were reflected by ultraviolet （UV） and circular dichroism （CD） spectroscopies.
文摘The Dye Sensitized Solar Cell (DSSC) plays an important role because of low material cost, ease of production and high conversion efficiency as compared to other thin-film solar cell technologies. The main objective is to create and find the best configuration of the solar cell based on materials that are inexpensive and highly efficient in solar energy conversion and subsequently test the efficiency of dye sensitized titanium dioxide solar cell. We begin the process with two glass plates coated with Fluorine tin oxide (FTO). Titanium dioxide is applied to the conductive side of one plate and the other plate is coated with graphite. A dye is adsorbed on to the TiO2 layer and then the plates are sandwiched together. A drop of iodide electrolyte is then added between the plates. The tests carried out indoors under a lamp emitting all wavelengths in the visible spectrum were not found to provide consistent data due to substantial heating of the cell. The outdoor tests carried out in natural sunlight exhibited steady voltage at much higher level. Future research will involve the incorporation of quantum dots instead of the organic dye as a sensitizer. Quantum dots have the advantages of providing tunable band gaps and the ability to absorb specific wavelength.
基金This research has been partially supported by the Government of Andalusia’s project“Characterization and modelling of the phosphogypsum stacks from Huelva for their environmental management and control”(Ref.:RNM-6300) by National Institution of Higher Education,Science,Technology and Innovation of the Republic of Ecuador-(SENESCYT for its acronym in Spanish)+2 种基金The authors would like to acknowledge the financial support received from the company Tioxide-Huelva by the research projects“Valorization of red gypsum from the industrial production of titanium dioxide”(PROFIT,CIT-310200-2007-47)“Applications of red gypsum and Tionite waste in commercial applications”The authors also thank to the technical staff for the advisory provided in the explanation of the results.
文摘Titanium is a very important element for several industrial applications, being one of the ninth most abundant elements in the Earth’s crust (0.63% wt). In this work it will discuss the different mining and industrial activities involved in the production of titanium dioxide. The first step analyzed will treat about the beneficiation mining process of titanium mineral, and secondly, it will discuss the two main processes of the TiO2 manufacturing (sulphate and chloride routes). In addition, we will show different uses of the titanium dioxide pigment as filler in paper, plastics and rubber industries and as flux in glass manufacture, etc. Finally, we will show that the old wastes are currently called co-products since they were valorized, being commercialized by the Spanish industry of TiO2 production in different fields such as agriculture, civil engineering, or cement manufacturing.
文摘In this work we have developed an analytical method to measure potential titanium debris released from TiO2 nanotube layers devices immersed in biological fluids. This quantitative study is highly required to ensure both the security and non toxicity of the nanostructured surfaces used as future implantable medical devices in the living. A one-pot synthesis process is developed to produce high quality standard solutions of titanium dioxide nanoparticles in aqueous medium. The elaborated dispersion is then used to fabricate standard solutions in both aqueous and human blood plasma media. The synthesized nanoparticles dispersion was characterized by granulometry. The nanoparticles structure and morphology were then observed using Transmission Electron Microscopy (TEM). Thermogravimetric Analysis (TGA) was used to evaluate the concentration of TiO2 in the suspension. A quantitative routine by the use of Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) is developed. The quantification threshold of titanium species is found to be in the 30 - 40 ppb range. None interference is detected between the particles and the human blood plasma. Using the established quantitative routine, the titanium species release from titania nanotube layers in human blood plasma is evaluated.
基金the China Scholarship Council(CSC,file no.201706950035)University of Manchester joint studentship for supporting her PhD researchthe CSC for her academic visiting fellowship at The University of Manchester(file no.201708440477)the Foundation of Department of Education of Guangdong Province(No.2017KZDXM085,2018KZDXM070)。
文摘Hydrogen(H2)production from photocatalytic reforming of cellulose is a promising way for sustainable H2 to be generated.Herein,we report a systematic study of the photocatalytic reforming of cellulose over Pt/m-TiO2(i.e.mixed TiO2,80%of anatase and 20%of rutile)catalysts in water.The optimum operation condition was established by studying the effect of Pt loading,catalyst concentration,cellulose concentration and reaction temperature on the gas production rate of H2(r(H2))and CO2(r(CO2)),suggesting an optimum operation condition at 40°C with 1.0 g·L^-1of cellulose and 0.75 g·L^-1of 0.16-Pt/m-TiO2 catalyst(with 0.16 wt%Pt loadting)to achieve a relatively sound photocatalytic performance with rH2=9.95μmol·h^-1.It is also shown that although the photoreforming of cellulose was operated at a relatively mild condition(i.e.with an UV-A lamp irradiation at40°C in the aqueous system),a low loading of Pt at^0.16 wt%on m-TiO2 could promote the H2 production effectively.Additionally,by comparing the reaction order expressed from both r(H2)(a1)and r(CO2)(a2)with respect to cellulose and water,the possible mechanism of H2 production was proposed.
基金the CAS Strategic Priority Project(No.XDA13040404)the National Natural Science Foundation of China for Exploring Key Scientific Instrument(No.41827805)the Shandong Key Laboratory of Corrosion Science。
文摘Corrosion protection has become an important issue as the amount of infrastructure construction in marine environment increased.Photocathodic protection is a promising method to reduce the corrosion of metals,and titanium dioxide(TiO2) is the most widely used photoanode.This review summarizes the progress in TiO2 photo gene rated protection in recent years.Different types of semiconductors,including sulfides,metals,metal oxide s,polymers,and other materials,are used to design and modify TiO2.The strategy to dramatically improve the efficiency of photoactivity is proposed,and the mechanism is investigated in detail.Characterization methods are also introduced,including morphology testing,light absorption,photoelectrochemistry,and protected metal observation.This review aims to provide a comprehensive overview of Ti02 development and guide photocathodic protection.
文摘This research work aims to reduce the band gap of thin layers of titanium oxide by the incorporation of graphene oxide sheets. Thin layers of the TiO2-GO composites were prepared on a glass substrate by the spin-coating technique from GO and an aqueous solution of TiO2. A significant decrease in optical band gap was observed at the TiO2-GO compound compared to that of pure TiO2. Samples as prepared were characterized using XRD, SEM and UV-visible spectra. XRD analysis revealed the amorphous nature of the deposited layers. Scanning electron microscope reveals the dispersion of graphene nanofiles among titanium oxide nanoparticles distributed at the surface with an almost uniform size distribution. The band gap has been calculated and is around 2 eV after incorporation of Graphene oxide. The chemical bond C-Ti between the titanium oxide and graphene sheets is at the origin of this reduction.
