Static corrections using the conventional method are basically conducted in two steps, the weathering correction followed by the correction from the top of the sub-weathering to the unified datum. However, the convent...Static corrections using the conventional method are basically conducted in two steps, the weathering correction followed by the correction from the top of the sub-weathering to the unified datum. However, the conventional method fails to well deal with statics problems in case the top of the sub-weathering is sharply undulated and the lateral velocity of the sub-weathering varies significantly. This brings us to the introduction of a smooth intermediate reference datum （IRD） located under the top of the sub-weathering, which helps to further increase the accuracy of statics based on the weathering corrections, and ensures the imaging quality. Good results based on the IRD technique have been achieved in the complex areas in western China. This paper discusses the IRD functions, its application requirements, and selection of related parameters. Some typical sections for comparison are also given in this paper.展开更多
By use of the recursive formulation of flexible multibody system with closed loops,this paper studies the dynamic simulation of complicated multibody system.The conception of static correction modes in structural dyna...By use of the recursive formulation of flexible multibody system with closed loops,this paper studies the dynamic simulation of complicated multibody system.The conception of static correction modes in structural dynamics is introduced to present the local deformation effects due to reaction forces at kinematic joints.A space four bar mechanism is utilized here as an example to describe the method of selecting static correction modes.Compared with vibration normal modes, static correction modes are demonstrated to be effective in numerical simulation.展开更多
The inversion of TEM data, using the observed magnetic fields instead of that of apparent resistivities data in this paper, avoids the errors caused by the definition of the apparent resistivity. The inversed results...The inversion of TEM data, using the observed magnetic fields instead of that of apparent resistivities data in this paper, avoids the errors caused by the definition of the apparent resistivity. The inversed results by fitting the magnetic fields of the transmitter source's image with the observed magnetic fields are relatively less affected by the conductivity inhomogeneity. The MT apparent curve is calculated on the basis of the conductivity model constructed from the TEM inversion results. This curve is used as a reference curve for the correction of MT static shift, which makes the correction more reliable. Meanwhile, the domain transformation is also achieved from time to frequency between the two kinds of electromagnetic data. Therefore, the correction of the MT static shift is actualized using TEM inversion method. The corresponding application research shows that this method is very effective for the identification and correction of the MT static shift.展开更多
Reflection data in CMP has influenced seriously in static calculations,especially in some highly weathered and structurally altered circumstances. Because of static correction in the existed problems and requests,the ...Reflection data in CMP has influenced seriously in static calculations,especially in some highly weathered and structurally altered circumstances. Because of static correction in the existed problems and requests,the authors studied the angle dependent tomographic static correction,and discussed its basic theory, including the establishment of forward model,the calculation theory of tomography and tomographic static correction. The usage of theoretical models and practical information on the method has been validated. The results show that using these methods to calculate static correction in a complex area,the quality of static correction is greatly improved.展开更多
为提高静止无功补偿器(static var compensator,SVC)应对直流电弧炉等冲击性负载的闪变抑制性能,文中在改进Takagi-Sugeno(TS)模糊算法的基础上,提出一种SVC滚动预测控制方法。首先,建立直流电弧炉电气模型并仿真分析其无功特性;然后,...为提高静止无功补偿器(static var compensator,SVC)应对直流电弧炉等冲击性负载的闪变抑制性能,文中在改进Takagi-Sugeno(TS)模糊算法的基础上,提出一种SVC滚动预测控制方法。首先,建立直流电弧炉电气模型并仿真分析其无功特性;然后,针对经典TS模糊预测算法应用于波动负荷时出现的输出异常置0情况,提出一种范围自适应修正的改进方法,该方法能消除一类算法应用机理导致的异常值,从而提高TS模糊算法对波动负荷无功功率预测的可靠性和准确性;最后,基于模型训练时间约束,建立无功功率半周期滚动预测控制模型,提前10 ms预测无功功率,改善了SVC传统控制系统响应的滞后特性。仿真结果表明,相比于SVC传统控制方法,所提方法的平均闪变改善率提高了54.17%,验证了所提方法对闪变现象的抑制效果提升显著。展开更多
Three-component seismic exploration through P-wave source and three-component geophone is an effective technique used in complicated reservoir exploration. In three-component seismic exploration data processing,one of...Three-component seismic exploration through P-wave source and three-component geophone is an effective technique used in complicated reservoir exploration. In three-component seismic exploration data processing,one of the difficulties is static correction of converted wave. This paper analyzes propagation characteristics of non-converted and converted refracted waves,and discovers a favor-able condition for the formation of converted refracted wave,i.e. the velocity of overlaying medium S wave is much lower than that of underlying medium S wave. In addition,the paper proposes the static correction method of converted wave based on PPS converted refracted wave,and processes the real three-component seismic data with better results of static correction of converted wave.展开更多
Statics are big challenges for the processing of deep reflection seismic data. In this paper several different statics solutions have been implemented in the processing of deep reflection seismic data in South China a...Statics are big challenges for the processing of deep reflection seismic data. In this paper several different statics solutions have been implemented in the processing of deep reflection seismic data in South China and their corresponding results have been compared in order to find proper statics solutions. Either statics solutions based on tomographic principle or combining the low-frequency components of field statics with the high-frequency ones of refraction statics can provide reasonable statics solutions for deep reflection seismic data in South China with very rugged surface topography, and the two statics solutions can correct the statics anomalies of both long spatial wavelengths and short ones. The surface-consistent residual static corrections can serve as the good compensations to the several kinds of the first statics solutions. Proper statics solutions can improve both qualities and reso- lutions of seismic sections, especially for the reflections of Moho in the upmost mantle.展开更多
文摘Static corrections using the conventional method are basically conducted in two steps, the weathering correction followed by the correction from the top of the sub-weathering to the unified datum. However, the conventional method fails to well deal with statics problems in case the top of the sub-weathering is sharply undulated and the lateral velocity of the sub-weathering varies significantly. This brings us to the introduction of a smooth intermediate reference datum （IRD） located under the top of the sub-weathering, which helps to further increase the accuracy of statics based on the weathering corrections, and ensures the imaging quality. Good results based on the IRD technique have been achieved in the complex areas in western China. This paper discusses the IRD functions, its application requirements, and selection of related parameters. Some typical sections for comparison are also given in this paper.
文摘By use of the recursive formulation of flexible multibody system with closed loops,this paper studies the dynamic simulation of complicated multibody system.The conception of static correction modes in structural dynamics is introduced to present the local deformation effects due to reaction forces at kinematic joints.A space four bar mechanism is utilized here as an example to describe the method of selecting static correction modes.Compared with vibration normal modes, static correction modes are demonstrated to be effective in numerical simulation.
文摘The inversion of TEM data, using the observed magnetic fields instead of that of apparent resistivities data in this paper, avoids the errors caused by the definition of the apparent resistivity. The inversed results by fitting the magnetic fields of the transmitter source's image with the observed magnetic fields are relatively less affected by the conductivity inhomogeneity. The MT apparent curve is calculated on the basis of the conductivity model constructed from the TEM inversion results. This curve is used as a reference curve for the correction of MT static shift, which makes the correction more reliable. Meanwhile, the domain transformation is also achieved from time to frequency between the two kinds of electromagnetic data. Therefore, the correction of the MT static shift is actualized using TEM inversion method. The corresponding application research shows that this method is very effective for the identification and correction of the MT static shift.
文摘Reflection data in CMP has influenced seriously in static calculations,especially in some highly weathered and structurally altered circumstances. Because of static correction in the existed problems and requests,the authors studied the angle dependent tomographic static correction,and discussed its basic theory, including the establishment of forward model,the calculation theory of tomography and tomographic static correction. The usage of theoretical models and practical information on the method has been validated. The results show that using these methods to calculate static correction in a complex area,the quality of static correction is greatly improved.
文摘为提高静止无功补偿器(static var compensator,SVC)应对直流电弧炉等冲击性负载的闪变抑制性能,文中在改进Takagi-Sugeno(TS)模糊算法的基础上,提出一种SVC滚动预测控制方法。首先,建立直流电弧炉电气模型并仿真分析其无功特性;然后,针对经典TS模糊预测算法应用于波动负荷时出现的输出异常置0情况,提出一种范围自适应修正的改进方法,该方法能消除一类算法应用机理导致的异常值,从而提高TS模糊算法对波动负荷无功功率预测的可靠性和准确性;最后,基于模型训练时间约束,建立无功功率半周期滚动预测控制模型,提前10 ms预测无功功率,改善了SVC传统控制系统响应的滞后特性。仿真结果表明,相比于SVC传统控制方法,所提方法的平均闪变改善率提高了54.17%,验证了所提方法对闪变现象的抑制效果提升显著。
基金Supported by the "10th Five-Year" National Science and Technology Plan of China (Grant No.2003BA613A-09)China Innovation Foundation of Petroleum Technology for Young and Middle-Aged Scholars (Grant No.03E7018)
文摘Three-component seismic exploration through P-wave source and three-component geophone is an effective technique used in complicated reservoir exploration. In three-component seismic exploration data processing,one of the difficulties is static correction of converted wave. This paper analyzes propagation characteristics of non-converted and converted refracted waves,and discovers a favor-able condition for the formation of converted refracted wave,i.e. the velocity of overlaying medium S wave is much lower than that of underlying medium S wave. In addition,the paper proposes the static correction method of converted wave based on PPS converted refracted wave,and processes the real three-component seismic data with better results of static correction of converted wave.
基金supported by the Foundation of Institute of Geology,Chinese Academy of Geological Sciences (No. J1315)the 3D Geological Mapping Project (No. D1204)the SinoProbe-02 project of China
文摘Statics are big challenges for the processing of deep reflection seismic data. In this paper several different statics solutions have been implemented in the processing of deep reflection seismic data in South China and their corresponding results have been compared in order to find proper statics solutions. Either statics solutions based on tomographic principle or combining the low-frequency components of field statics with the high-frequency ones of refraction statics can provide reasonable statics solutions for deep reflection seismic data in South China with very rugged surface topography, and the two statics solutions can correct the statics anomalies of both long spatial wavelengths and short ones. The surface-consistent residual static corrections can serve as the good compensations to the several kinds of the first statics solutions. Proper statics solutions can improve both qualities and reso- lutions of seismic sections, especially for the reflections of Moho in the upmost mantle.
