Parental Knowledge of Pre-Hospital Management of Avulsed Permanent Tooth in Children at Kath

BACKGROUND: Permanent tooth avulsion is one of the severe forms of dental traumatic injuries. The immediate action taken at the site of the accident is crucial to the prognosis of the tooth. Replantation is considered as the treatment of choice. OBJECTIVE: The study was undertaken to assess the knowledge of parents who accompany their children to the pediatric dental clinic, KATH on the pre-hospital management of avulsed permanent tooth in children. METHODS: A researcher administered structured questionnaire was used to collect data on the knowledge of pre-hospital management of avulsed permanent tooth from 83 parents who accompanied their wards to the pediatric dental clinic at KATH. RESULTS: A total of 83 parents were involved in the study. 30 (36%) were males while 53 (64%) were females. The majority of the parents (57%) were either university trained or had attended college of education. Only 32 parents (39%) were aware of the possibility of replantation. Majority of the parents chose non-physiologic media as the transport media of choice and only 10% would attempt self-replantation before seeking professional help. 76 parents (92%) had no previous education on pre-hospital management of avulsed tooth. CONCLUSION: The results obtained from this study indicate that parental knowledge on pre-hospital management of avulsed permanent tooth is low hence the need for massive public educational campaigns.

High-resolution CT-scan data reveals the tooth replacement pattern of the Late Jurassic tyrannosauroid Guanlong wucaii (Dinosauria, Theropoda)

The Tyrannosauridae,which is characterized by specialized pachydont dentition and putative bone-cracking predatory strategies,is one of the most extensively studied theropod lineages.Although tooth replacement patterns,crucial for understanding feeding behaviors,have been thoroughly studied in this group,studies on non-tyrannosaurid tyrannosauroids are relatively scarce.This study utilizes high-resolution CT data to investigate the tooth replacement pattern in two specimens of Guanlong wucaii,a Late Jurassic tyrannosauroid,and provides insights into the evolution of tooth replacement across Tyrannosauroidea.Second-generation replacement teeth,a rarity observed mainly in giant predatory theropods(e.g.some tyrannosaurids),were detected in the dentary dentition of the juvenile Guanlong.Zahnreihen reconstructions display a consistent cephalad alternating tooth replacement pattern in the maxilla and the dentary of both of the examined individuals,with Z-spacing values exceeding 2.0.As Guanlong grows,the Z-spacing value in the maxillary dentition increases,resembling the ontogenetic changes documented in the Tyrannosauridae.Additionally,like Tarbosaurus,Guanlong also displays a discontinuity between the tooth replacement waves at the premaxilla-maxilla boundary.This study thus demonstrates that some tyrannosaurid-like tooth replacement patterns were acquired before the origin of the Tyrannosauridae.

Effect of different interventions on orthodontic tooth movement acceleration:A network meta-analysis

Objective: To explore the effectiveness of various interventions in accelerating tooth movement, a systematic review and net-work meta analysis were used to draw a conclusion. Methods: MEDLINE, EMBASE, Willey Library, EBSCO, Web of Science Databases, and Cochrane Central Register of Controlled Trials databases to identify relevant studies. ADDIS 1.16.6 and Stata 16.0 software were used for NMA. Results: Five thousand five hundred and forty-two articles were searched out. After screening by two independent investigators, forty-seven randomized controlled trials, 1 390 participants, were included in this network meta-analysis. A total of 11 interventions involving Piezocision (Piezo), Photobiomodulation therapy (PBMT), Plate- let-rich plasma(PRP), Electromagnetic field(EF), Low intensity laser therapy(LLLT), Low intensity pulsed ultrasound(LI-PUS), Low-frequency vibrations(LFV), Distraction osteogenesis(DAD), Corticotomy(Corti), Microosteoperforations (MOPS), Traditional orthodontic(OT)were identified and classified into 3 classes including surgical treatment, non-surgical treatment and traditional orthodontic treatment. According to SUCRA probability ranking of the best intervention effect, when orthodontic treatment lasted for 1 month, PBMT (90.6%), Piezo(87.4%) and MOPs(73.6%)were the top three interventions to improve the efficiency of canine tooth movement. When orthodontic treatment lasted for 2 months, Corti (75.7%), Piezo (69.6%) and LFV(58.9%)were the top three interventions for improving the mobility efficiency of canine tooth movement. When orthodontic treatment lasted for 3 months, Cort (73.3%), LLLT(68.4%)and LFV(60.8%)were the top three interventions for improving the mobility efficiency of canine tooth movement. Conclusion: PBMT and Piezo can improve the efficiency of canine tooth movement significantly after 1 month, while Corti and LFV can improve the efficiency of canine tooth movement better after 2 and 3 months.

Single Tooth Segmentation on Panoramic X-Rays Using End-to-End Deep Neural Networks

In dentistry, panoramic X-ray images are extensively used by dentists for tooth structure analysis and disease diagnosis. However, the manual analysis of these images is time-consuming and prone to misdiagnosis or overlooked. While deep learning techniques have been employed to segment teeth in panoramic X-ray images, accurate segmentation of individual teeth remains an underexplored area. In this study, we propose an end-to-end deep learning method that effectively addresses this challenge by employing an improved combinatorial loss function to separate the boundaries of adjacent teeth, enabling precise segmentation of individual teeth in panoramic X-ray images. We validate the feasibility of our approach using a challenging dataset. By training our segmentation network on 115 panoramic X-ray images, we achieve an intersection over union (IoU) of 86.56% for tooth segmentation and an accuracy of 65.52% in tooth counting on 87 test set images. Experimental results demonstrate the significant improvement of our proposed method in single tooth segmentation compared to existing methods.

Three-Dimensional Conjugate Tooth Surface Design and Contact Analysis of Harmonic Drive with Double-Circular-Arc Tooth Profle

A three-dimensional conjugate tooth surface design method for Harmonic Drive with a double-circular-arc tooth profle is proposed. The radial deformation function of the fexspline (FS), obtained through Finite Element (FE) analysis, is incorporated into the kinematics model. By analyzing the FS tooth enveloping process, the optimization of the overlapping conjugate tooth profle is achieved. By utilizing the hobbing process, the three-dimensional machinable tooth surface of FS can be acquired. Utilizing the coning deformation of the FS, simulations are conducted to analyze the multi-section assembly and meshing motion of the machinable tooth surface. The FE method is utilized to analyze and compare the loaded contact characteristics. Results demonstrate that the proposed design method can achieve an internal gear pair consisting of a circular spline with a spur gear tooth surface and the FS with a machinable tooth surface. With the rated torque, approximately 24% of the FS teeth are engaged in meshing, and more than 4/5 of the tooth surface in the axial direction carries the load. The contact patterns, maximum contact pressure, and transmission error of the machinable tooth surface are 227.2%, 40.67%, and 71.24% of those on the spur gear tooth surface, respectively. It clearly demonstrates exceptional transmission performance.

Comparative Study of the Rock-breaking Mechanism of a Disc Cutter and Wedge Tooth Cutter by Discrete Element Modelling

The operation of a shield tunnel boring machine(TBM)in a high-strength hard rock stratum results in significant cutter damage,adversely affecting the thrust and torque of the cutter head.Therefore,it is very important to carry out the research on the stress characteristics and optimize the cutter parameters of cutters break high-strength hard rock.In this paper,the rock-breaking performance of cutters in an andesite stratum in the tunnel of Qingdao Metro Line No.8 was investigated using the discrete element method and theoretical analysis.The rock-breaking processes of a disc cutter and wedge tooth cutter were simulated by software particle flow code PFC^(3D),and the rock-breaking degree,stress of the cutter,and rock-breaking specific energy were analyzed.The rock damage caused by the cutter in a specific section was divided into three stages:the advanced influence,crushing,and stabilizing stages.The rock-breaking degree and the tangential and normal forces of the wedge tooth cutter are larger than that of the disc cutter under the same conditions.The disc cutter(wedge tooth cutter)has the highest rock-breaking efficiency at a cutter spacing of 100 mm(110 mm)and a penetration depth of 8 mm(10 mm),and the rock-breaking specific energy is 11.48 MJ/m^(3)(12.05 MJ/m^(3)).Therefore,two types of cutters with different penetration depths or cutter spacing should be considered.The number of teeth of wedge tooth cutters can be increased in hard strata to improve the rock-breaking efficiency of the shield.The research results provide a reference for shield cutterhead selection and cutter layout in similar projects.

Single cell RNA sequencing reveals mesenchymal heterogeneity and critical functions of Cd271 in tooth development

BACKGROUND Accumulating evidence suggests that the maxillary process,to which cranial crest cells migrate,is essential to tooth development.Emerging studies indicate that Cd271 plays an essential role in odontogenesis.However,the underlying mechanisms have yet to be elucidated.AIM To establish the functionally heterogeneous population in the maxillary process,elucidate the effects of Cd271 deficiency on gene expression differences.METHODS p75NTR knockout(Cd271-/-)mice(from American Jackson laboratory)were used to collect the maxillofacial process tissue of p75NTR knockout mice,and the wildtype maxillofacial process of the same pregnant mouse wild was used as control.After single cell suspension,the cDNA was prepared by loading the single cell suspension into the 10x Genomics Chromium system to be sequenced by NovaSeq6000 sequencing system.Finally,the sequencing data in Fastq format were obtained.The FastQC software is used to evaluate the quality of data and CellRanger analyzed the data.The gene expression matrix is read by R software,and Seurat is used to control and standardize the data,reduce the dimension and cluster.We search for marker genes for subgroup annotation by consulting literature and database;explore the effect of p75NTR knockout on mesenchymal stem cells(MSCs)gene expression and cell proportion by cell subgrouping,differential gene analysis,enrichment analysis and protein-protein interaction network analysis;understand the interaction between MSCs cells and the differentiation trajectory and gene change characteristics of p75NTR knockout MSCs by cell communication analysis and pseudo-time analysis.Last we verified the findings single cell sequencing in vitro.RESULTS We identified 21 cell clusters,and we re-clustered these into three subclusters.Importantly,we revealed the cell–cell communication networks between clusters.We clarified that Cd271 was significantly associated with the regulation of mineralization.CONCLUSION This study provides comprehensive mechanistic insights into the maxillary-process-derived MSCs and demonstrates that Cd271 is significantly associated with the odontogenesis in mesenchymal populations.

Tooth arrangement design of retractable DTH hammer bit used for drilling while casing

Down-the-hole(DTH)hammer with casing while drilling(CWD)is a technology that has been proven to be able to alleviate many of the problems faced by complex formations.However,the drill bit is suffered from rapid wear,low drilling efficiency,and high energy consumption due to the unreasonable tooth arrangement and impact energy selection in drilling process,which affect the application effect of this technology.ABAQUS software was used for numerical simulation of rock breaking behavior under impact load with the single,three,and five teeth arrangement drill bit respectively,to improve the application effect and solve the aforementioned technical problems.Based on the calculated parameters of tooth arrangement,we designed a novel drill bit for hard rocks and provided a theoretical basis for the tooth arrangement of largediameter drill bits.

A Rare Case: Multiple Mandibular Arteriovenous Malformation with High Output: May a Tooth Extraction Alone Turn to a Catastrophic Condition?

Background: Arteriovenous malformations (AVM) in mandible and neck are potentially life-threatening conditions because of possible massive hemorrhage. They are often first diagnosed by dentists as bleeding. In this case, we report how a tooth extraction turned to a catastrophic condition in a patient with multiple AVMs in the mandibular, submandibular and hyoid region. Case: A 19-year-old male patient diagnosed with AVMs in the mandibular and submandibular regions was admitted to our hospital with the complaint of leaky hemorrhage around the lower left 3rd molar tooth. Tooth extraction was planned after embolization procedure. The patient was intubated uneventfully using video laryngoscope. However, an acute bleeding of more than 1600 ml occurred in one minute just after the mouth opener was inserted. The patient was transferred to the Interventional Radiology and other branches of the high-flow AVM were embolized. The patient was taken back to the operating room and the tooth was extracted uneventfully. Conclusion: In AVM cases, trauma should be minimized during induction of general anesthesia and intubation should be performed gently with fiberoptic bronchoscopy or video laryngoscopy. We conclude that a multidisciplinary approach as applied to our patient would be valuable in such cases.

Charcot-Marie-Tooth病的遗传、临床和电生理观察(附20例临床分析)

本文报道 ２０例 Ｃｈａｒｃｏｔ－Ｍａｒｉｅ－Ｔｏｏｔｈ病的遗传、临床和电生理资料。其中男 １６例，女 ４例，平均发病年龄为２６．７５岁。发现４例显性遗传，３例隐性遗传，１０例散发，３例遗传情况不详。主要症状有高弓足、垂足、鹤腿和腱反射消失；上肢前臂有肌萎缩者占１／４。所有病人电生理检查均有失神经现象，特别是ＭＣＶ有明显减慢。且发现ＭＣＶ的减慢和临床严重程度无相关联系。

Pinion Tooth Surface Generation Strategy of Spiral Bevel Gears

Aviation spiral bevel gears are often generated by spiral generated modified（SGM） roll method.In this style,pinion tooth surface modified generation strategy has an important influence on the meshing and contact performances.For the optimal contact pattern and transmission error function,local synthesis is applied to obtain the machine-tool settings of pinion.For digitized machine,four tooth surface generation styles of pinion are proposed.For every style,tooth contact analysis（TCA） is applied to obtain contact pattern and transmission error function.For the difference between TCA transmission error function and design objective curve,the degree of symmetry and agreement are defined and the corresponding sub-objective functions are established.Linear weighted combination method is applied to get an equivalent objective function to evaluate the shape of transmission error function.The computer programs for the process above are developed to analyze the meshing performances of the four pinion tooth surface generation styles for a pair of aviation spiral bevel gears with 38/43 teeth numbers.The four analytical results are compared with each other and show that the incomplete modified roll is optimal for this gear pair.This study is an expansion to generation strategy of spiral bevel gears,and offers new alternatives to computer numerical control（CNC） manufacture of spiral bevel gears.

人体词“牙/齿”和“tooth”语义转移的认知研究

人体词"牙/齿",对应的英文词"tooth",基本义指称人体重要的部位之一。在漫长的语言演变过程中,主要借助隐喻和转喻的作用下,构成了一个连续统一的语义转移系统——基于突显和邻近原则的转喻所指:"年龄、口味、言语、情感";基于形貌相似的隐喻所指:"齿状物";基于隐喻转喻互动的隐转喻所指:"战争"。这说明了英汉民族某些共同的身体体验决定了认知的相通性。同时,在英汉民族思维中牙齿的言语交际功能都占有很突显的地位,汉民族还注重牙齿的外貌特征。

Charcot-Marie-Tooth病的诊治

Charcot-Marie-Tooth病(CMT)是最常见的一种遗传性周围神经病,是一组具有显著临床异质性和遗传异质性的疾病,主要表现为肢体远端肌肉进行性无力和萎缩,伴有轻到中度感觉减退,腱反射减弱和足部畸形等.近20年CMT致病基因的不断被克隆,其疾病分型、临床表型和基因表型的关系发生了巨大变化.本文主要阐述CMT的疾病分型演变、基因诊断策略、临床治疗进展.

剔除小鼠神经微管运动蛋白Kif1b基因导致类似Charcot-Marie-Tooth病动物模型

目的研究杂合子小鼠Kiflb基因剔除后导致的表现型,探讨其作为类似Charcot-Marie-Tooth (CMT)病动物模型的可行性。方法用Southern blotting和PCR检测同源重组和基因型,Western blotting测定杂合子KIF1B蛋白表达量,行为学实验观察其表现型。结果杂合子Kif1b基因剔除小鼠的KIF1B蛋白表达量减少了一半以上,行为学实验结果表明,杂合子基因剔除小鼠在运动和感觉方面均有异常。Rota-rod实验,Rod walking实验和Wire hanging实验中,野生型小鼠的停留时间均明显长于Kif1b基因剔除小鼠。同时,杂合子Kif1b基因剔除小鼠在热板实验和福尔马林实验中,表现出对温度觉和痛觉反应的迟钝,其反应时间与野生型小鼠相比明显延长,反应强度降低。结论杂合子Kif1b基因剔除小鼠的表现型与人类腓骨肌萎缩症相似,作为疾病模型具备可行性。

Charcot-Marie-Tooth病的研究与诊断进展

Charcot-Marie-Tooth病,是一组最常见的在遗传和临床上都具有高度异质性的家族性周围神经病,约占全部遗传性神经病的90%。其基本临床表现相似,目前已知的亚型多达35种,为该病的确诊带来极大困难。因此,本文综述该病各亚型的临床、电生理、周围神经病理、致病基因及有效诊断方法。

无线系统中Bluetooth链路的有效性及可靠性研究

本文通过蓝牙通信链路信道模型的自适应性研究,采用层次式编码方案和Turbo码编码技术,在蓝牙协议固有的编码基础上增加另一编码层,构成跨层的双重自适应结构,自适应于时变的信道特征和不同媒体业务的服务质量(QoS),最大限度地提高蓝牙无线链路的有效性和可靠性。

A Clinical Analysis of Tooth Size Discrepancy (Bolton Index) among Orthodontic Patients in Wuhan of Central China

The purpose of this study was to determine the total Bolton index （TBI） and anterior Bolton index （ABI）, evaluate the clinical significance of tooth size discrepancies and the influence of gender variation of mesiodistal tooth width on Bolton Index and estimate which tooth has the greatest influence on Bolton Index. A total of 110 pairs of pretreatment dental study casts （41 male and 69 female） were selected from patients treated in Department of Orthodontics of Union Hospital in Wuhan, China. A sliding dental Vernier caliper was used for the measurement of the mesiodistal tooth width. Descriptive statistical mean values, standard deviation, standard error of the mean values, coefficient of variance and the t-test were used for the statistical analysis of the data. The study found that TBI, ABI and the total sum of teeth width had no significant difference between male and female. Male group indicated that Bolton Index （BI） was mostly influenced by the width of lower right second premolar, whereas female group showed that BI was mostly influenced by the width of both the right and left maxillary lateral incisor.

Analysis of the Stress Distribution Pattern of Anatomic and Non-Anatomic Tooth Forms on Maxillary and Mandibular Edentulous Ridges—A Photoelastic Study

Aim: To compare the type of stress distribution pattern occurring with anatomic and non-anatomic tooth forms beneath a complete denture in both maxillary and mandibular arch. Methodology: A photoelastic model of the edentulous maxillary and mandibular ridge was prepared meticulously to simulate the human mandible and maxilla. Two sets of acrylic teeth with anatomic and non-anatomic occlusal forms were used to fabricate upper and lower dentures. A vertical static load of 100 N was applied through the mandibular model to the maxillary model. After load application on the dentures the photoelastic model as well as the upper and lower complete dentures were sectioned in the midline. The sectioned photoelastic model was viewed through a polariscope to observe the fringe pattern indicating varying amounts of stress distribution. In this study, a two-dimensional photoelastic stress analysis technique was utilized. Results: Force per unit area was observed more in anatomic teeth than the non-anatomic counterpart. Hence anatomic tooth forms may increase the possibility of bone resorption rate over a period of time. However, in non-anatomic lower teeth, a decrease in value was observed from posterior to anterior region. Conclusion: Stress of greater magnitude was observed with cuspal teeth whereas non-anatomic (0°) showed slightly less magnitude of stress. Depending upon the clinical situation the clinician needs to choose the type of occlusal tooth forms for edentulous patients.

Molar-Tooth构造成因争论分析

综述了Molar-Tooth的时空分布及其形态特征,Molar-Tooth为元古代时期全球性的一种构造现象.其成因,地质学家们已争论了一个多世纪,直到今天还未取得一致的认识.归纳前人的研究成果,初步认为Molar-Tooth的成因与藻类等生物活动有关.

Fate of root shell after pontic/socket shield techniques,is it better to extract the whole tooth?

A series of changes occur in the remaining alveolar process after whole tooth extraction.The basic question is,why do the bony walls(especially the labial/buccal)get resorbed immediately after the tooth is removed?This could be because,with cementum of the concerned tooth and its periodontal ligament,the supporting bundle bone is dependent on the presence of the tooth.This loss can be compensated using numerous techniques,such as socket grafting using various biomaterials to preserve the alveolar bone and buccal grafting with guided tissue regeneration to increase the thickness of buccal bone or placement of implant immediately.However,none of these techniques prevent the modelling of the alveolar bone post-extraction.Few studies have demonstrated that preservation of the roots in the alveolar process maintains the bone volume and facilitates vertical bone growth.A histological study in animals and humans has shown that the retained root shell does not pose any interference in the osseointegration of the implant(if placed simultaneously).Although various names have been proposed to describe the concept of retaining full or part of the root to prevent the resorption of the ridge,socket-shield and pontic-shield are the two most commonly used terms worldwide.The extraction of the whole tooth might be the choice of therapy when socket-shield or pontic-shield is not possible due to anatomical variations,infections,or lack of clinical expertise.Irrespective of the size,when a whole root or a root fragment(is left in situ),it is the dentist’s ethical duty to advise/inform the patient and ensure repeated clinical and radiographic follow-up.The present study aimed to highlight the current status of these techniques,their benefits,and possible complications and address whether the paradigm of the teeth extraction methods should be altered.