Custom designed and built meso shear test equipment was used to examine the shear crack propagation in gassy coal under different gas pressures.The spatial-temporal evolution of gas migration pathways in the coal duri...Custom designed and built meso shear test equipment was used to examine the shear crack propagation in gassy coal under different gas pressures.The spatial-temporal evolution of gas migration pathways in the coal during shear loading was also researched.The results show that gas pressure can hasten crack growth at the shear fracture surface,can reduce the shear strength of gassy coal,and can accelerate the shear failure process.Shear failure in gassy coal exhibits five stages:the pre-crack stage;the stable crack growth stage;the unsteady crack growth stage;the fracture stage;and,finally,the friction crack stage.The shear breaking creates two kinds of crack,shear cracks and tensile cracks.Cracks first appear in the shear plane at both ends and then extend toward the center until a shear fracture surface forms.The direction of shear crack propagation diverges from the predetermined shear plane by an angle of about 5°-10°.展开更多
The strata of Jurassic was divided into three tectonic sequences and eight se- quences of third rank,according to the developing feature of the tectonic inconformity and the transforming feature of the depositional sy...The strata of Jurassic was divided into three tectonic sequences and eight se- quences of third rank,according to the developing feature of the tectonic inconformity and the transforming feature of the depositional system tracts.Also the identification and the division of the base-level cycle of different period were carried through.Therefore three cycles of super period,eight cycles of long period,twenty-four cycles of middle period and some cycles of short period were identified.From the overall character of the coal-accu- mulation in the Mesozoic,we can see that the Yan'an formation is of the best nature of coal bearing.When the coal bearing systems of Jurassic were depositing,the Ordos area is the coal accumulating basin of terrene of large scale and located in the same tectonic unit.But the local structure of different part and the paleolandform are different in the basin which resulted in the difference of the depositional environment.So the layer number and the distribution of the thickness of the coal beds are different in the different part of the ba- sin.The coal-accumulating action migrated regularly along with the development,evolve- ment and migration of the depositional systems.The layer numbers of the coal beds, which can be mined,are more in the north and west fringe of the basin,whose distributing area is extensive,and they are more steady in the landscape orientation,also the total thickness is great.Therefore the nature of coal bearing and the coal-accumulating action of different part changed obviously in the space in Ordos area.展开更多
The breaking features and stress distribution of overlying strata in a steeply dipping coal seam(SDCS)differ significantly from those in a near-horizontal one.In this study,the laws governing the evolution of vertical...The breaking features and stress distribution of overlying strata in a steeply dipping coal seam(SDCS)differ significantly from those in a near-horizontal one.In this study,the laws governing the evolution of vertical stress release and shear stress concentration in the overlying strata of coal seams with different dip angles are derived via numerical simulation,rock mechanics tests,acoustic emissions,and field measurements.Thus,the stress-driven dynamic evolution of the overlying strata structure,in which a shear stress arch forms,is determined.Upon breaking the lower pari of the overlying strata,the shear stress transfers rapidly to the upper part of the working face.The damaged zone of the overlying strata migrates upward along the dip direction of the working face.The gangue in the lower part of the working face is compacted,leading to an increase in vertical stress.As the dip angle of the coal seam increases,the overlying strata fail suddenly under the action of shear stresses.Finally,the behavioral response of the overlying strata driven by shear stresses in the longwall working face of an SDCS is identified and analyzed in detail.The present research findings reveal the laws governing the behavior of mine pressure in the working face of an SDCS,which in turn can be used to establish the respective on-site guidance.展开更多
To understand the migration mechanisms of phosphorus(P)during coal-based reduction,a high-phosphorus oolitic iron ore was reduced by coal under various experimental conditions.The migration characteristics and kinetic...To understand the migration mechanisms of phosphorus(P)during coal-based reduction,a high-phosphorus oolitic iron ore was reduced by coal under various experimental conditions.The migration characteristics and kinetics of P were investigated by a field-emission electron probe microanalyzer(FE-EPMA)and using the basic principle of solid phase mass transfer,respectively.Experimental results showed that the P transferred from the slag to the metallic phase during reduction,and the migration process could be divided into three stages:phosphorus diffusing from the slag to the metallic interface,the formation of Fe P compounds at the slag metal interface and P diffusing from the slag metal interface to the metallic interior.The reduction time and temperature significantly influenced the phosphorus content of the metallic and slag phases.The P content of the metallic phase increased with increasing reduction time and temperature,while that of the slag phase gradually decreased.The P diffusion constant and activation energy were determined and a migration kinetics model of P in coal-based reduction was proposed.P diffusion in the metallic phase was the controlling step of the P migration.展开更多
基金supported in part by the State Key Basic Research Program of China(No.2011CB201203)in part by the General Project of the National Natural Science Foundation of China(No.50974141)the Fundamental Research Funds for the Central Universities(No.CDJZR12240055)
文摘Custom designed and built meso shear test equipment was used to examine the shear crack propagation in gassy coal under different gas pressures.The spatial-temporal evolution of gas migration pathways in the coal during shear loading was also researched.The results show that gas pressure can hasten crack growth at the shear fracture surface,can reduce the shear strength of gassy coal,and can accelerate the shear failure process.Shear failure in gassy coal exhibits five stages:the pre-crack stage;the stable crack growth stage;the unsteady crack growth stage;the fracture stage;and,finally,the friction crack stage.The shear breaking creates two kinds of crack,shear cracks and tensile cracks.Cracks first appear in the shear plane at both ends and then extend toward the center until a shear fracture surface forms.The direction of shear crack propagation diverges from the predetermined shear plane by an angle of about 5°-10°.
基金National Basis Research Program of China(2003CB214608)
文摘The strata of Jurassic was divided into three tectonic sequences and eight se- quences of third rank,according to the developing feature of the tectonic inconformity and the transforming feature of the depositional system tracts.Also the identification and the division of the base-level cycle of different period were carried through.Therefore three cycles of super period,eight cycles of long period,twenty-four cycles of middle period and some cycles of short period were identified.From the overall character of the coal-accu- mulation in the Mesozoic,we can see that the Yan'an formation is of the best nature of coal bearing.When the coal bearing systems of Jurassic were depositing,the Ordos area is the coal accumulating basin of terrene of large scale and located in the same tectonic unit.But the local structure of different part and the paleolandform are different in the basin which resulted in the difference of the depositional environment.So the layer number and the distribution of the thickness of the coal beds are different in the different part of the ba- sin.The coal-accumulating action migrated regularly along with the development,evolve- ment and migration of the depositional systems.The layer numbers of the coal beds, which can be mined,are more in the north and west fringe of the basin,whose distributing area is extensive,and they are more steady in the landscape orientation,also the total thickness is great.Therefore the nature of coal bearing and the coal-accumulating action of different part changed obviously in the space in Ordos area.
基金the National Natural Science Foundation of China(Grant No.51634007)the Graduate Innovation Fund Project of Anhui University of Science and Technology of China(Grant No.2019CX1003).
文摘The breaking features and stress distribution of overlying strata in a steeply dipping coal seam(SDCS)differ significantly from those in a near-horizontal one.In this study,the laws governing the evolution of vertical stress release and shear stress concentration in the overlying strata of coal seams with different dip angles are derived via numerical simulation,rock mechanics tests,acoustic emissions,and field measurements.Thus,the stress-driven dynamic evolution of the overlying strata structure,in which a shear stress arch forms,is determined.Upon breaking the lower pari of the overlying strata,the shear stress transfers rapidly to the upper part of the working face.The damaged zone of the overlying strata migrates upward along the dip direction of the working face.The gangue in the lower part of the working face is compacted,leading to an increase in vertical stress.As the dip angle of the coal seam increases,the overlying strata fail suddenly under the action of shear stresses.Finally,the behavioral response of the overlying strata driven by shear stresses in the longwall working face of an SDCS is identified and analyzed in detail.The present research findings reveal the laws governing the behavior of mine pressure in the working face of an SDCS,which in turn can be used to establish the respective on-site guidance.
基金financially supported by the National Natural Science Foundation of China (No.51604063)
文摘To understand the migration mechanisms of phosphorus(P)during coal-based reduction,a high-phosphorus oolitic iron ore was reduced by coal under various experimental conditions.The migration characteristics and kinetics of P were investigated by a field-emission electron probe microanalyzer(FE-EPMA)and using the basic principle of solid phase mass transfer,respectively.Experimental results showed that the P transferred from the slag to the metallic phase during reduction,and the migration process could be divided into three stages:phosphorus diffusing from the slag to the metallic interface,the formation of Fe P compounds at the slag metal interface and P diffusing from the slag metal interface to the metallic interior.The reduction time and temperature significantly influenced the phosphorus content of the metallic and slag phases.The P content of the metallic phase increased with increasing reduction time and temperature,while that of the slag phase gradually decreased.The P diffusion constant and activation energy were determined and a migration kinetics model of P in coal-based reduction was proposed.P diffusion in the metallic phase was the controlling step of the P migration.
