Large-scale particle trapping by acoustic vortices with a continuously variable topological charge

Strengthened directivity with higher-order side lobes can be generated by the transducer with a larger radius at a higher frequency. The multi-annular pressure distributions are displayed in the cross-section of the acoustic vortices(AVs)which are formed by side lobes. In the near field, particles can be trapped in the valley region between the two annuli of the pressure peak, and cannot be moved to the vortex center. In this paper, a trapping method based on a sector transducer array is proposed, which is characterized by the continuously variable topological charge(CVTC). This acoustic field can not only enlarge the range of particle trapping but also improve the aggregation degree of the trapped particles. In the experiments, polyethylene particles with a diameter of 0.2 mm are trapped into the multi-annular valleys by the AV with a fixed topological charge. Nevertheless, by applying the CVTC, particles outside the radius of the AV can cross the pressure peak successfully and move to the vortex center. Theoretical studies are also verified by the experimental particles trapping using the AV with the continuous variation of three topological charges, and suggest the potential application of large-scale particle trapping in biomedical engineering.

THE TOPOLOGICAL OPTIMIZATION FOR TRUSS STRUCTURES WITH STRESS CONSTRAINTS BASED ON THE EXIST-NULL COMBINED MODEL

A new exist-null combined model is proposed for the structural topology optimization. The model is applied to the topology optimization of the truss with stress constraints. Satisfactory computational result can be obtained with more rapid and more stable convergence as compared with the cross-sectional optimization. This work also shows that the presence of independent and continuous topological variable motivates the research of structural topology optimization.

Dynamic model for internally carried air-launched rocket

For rigid-flexible coupling multi-body with variable topology,such as the system of internally carried air-launched or heavy cargo airdrop,in order to construct a dynamic model with unified form,avoid redundancy in the modeling process and make the solution independent,a method based on the equivalent rigidization model was proposed.It divides a system into independent subsystems by cutting off the joints,of which types are changed with the operation process of the system.And models of different subsystems can be constructed via selecting suitable modeling methods.Subsystem models with flexible bodies are on the basis of the equivalent rigidization model which replaces the flexible bodies with the virtual rigid bodies.And the solution for sanction,which is based on the constraints force algorithm(CFA)and vector mechanics,can be independent on the state equations.The internally carried air-launched system was taken as an example for verifying validity and feasibility of the method and theory.The dynamic model of aircraft-rocket-parachute system in the entire phase was constructed.Comparing the modeling method with the others,the modeling process was programmed;and form of the model is unified and simple.The model,method and theory can be used to analyze other similar systems such as heavy cargo airdrop system and capsule parachute recovery system.

Topology Optimization for Harmonic Excitation Structures with Minimum Length Scale Control Using the Discrete Variable Method

Continuumtopology optimization considering the vibration response is of great value in the engineering structure design.The aimof this studyis toaddress the topological designoptimizationof harmonic excitationstructureswith minimumlength scale control to facilitate structuralmanufacturing.Astructural topology design based on discrete variables is proposed to avoid localized vibration modes,gray regions and fuzzy boundaries in harmonic excitation topology optimization.The topological design model and sensitivity formulation are derived.The requirement of minimum size control is transformed into a geometric constraint using the discrete variables.Consequently,thin bars,small holes,and sharp corners,which are not conducive to the manufacturing process,can be eliminated from the design results.The present optimization design can efficiently achieve a 0–1 topology configuration with a significantly improved resonance frequency in a wide range of excitation frequencies.Additionally,the optimal solution for harmonic excitation topology optimization is not necessarily symmetric when the load and support are symmetric,which is a distinct difference fromthe static optimization design.Hence,one-half of the design domain cannot be selected according to the load and support symmetry.Numerical examples are presented to demonstrate the effectiveness of the discrete variable design for excitation frequency topology optimization,and to improve the design manufacturability.

Simplified Deep Reinforcement Learning Based Volt-var Control of Topologically Variable Power System

The high penetration and uncertainty of distributed energies force the upgrade of volt-var control(VVC) to smooth the voltage and var fluctuations faster. Traditional mathematical or heuristic algorithms are increasingly incompetent for this task because of the slow online calculation speed. Deep reinforcement learning(DRL) has recently been recognized as an effective alternative as it transfers the computational pressure to the off-line training and the online calculation timescale reaches milliseconds. However, its slow offline training speed still limits its application to VVC. To overcome this issue, this paper proposes a simplified DRL method that simplifies and improves the training operations in DRL, avoiding invalid explorations and slow reward calculation speed. Given the problem that the DRL network parameters of original topology are not applicable to the other new topologies, side-tuning transfer learning(TL) is introduced to reduce the number of parameters needed to be updated in the TL process. Test results based on IEEE 30-bus and 118-bus systems prove the correctness and rapidity of the proposed method, as well as their strong applicability for large-scale control variables.