More than 500 datasets from the literature have been used to evaluate the relationships of specific surface area (SSA),cation exchange capacity (CEC) and activity versus the liquid limit (LL).The correlations gave R^2...More than 500 datasets from the literature have been used to evaluate the relationships of specific surface area (SSA),cation exchange capacity (CEC) and activity versus the liquid limit (LL).The correlations gave R^2 values ranging between 0.71 and 0.92.Independent data were also used to validate the correlations.Estimated SSA values slightly overestimate the measured SSA up to 100 m^2/g.Regarding the estimated CEC values,they overestimated the measured CEC values up to 20 meq/(100 g).A probabilistic approach was performed for the correlations of SSA,CEC and activity versus LL.The analysis shows that the relations of SSA,CEC and activity with LL are robust.Using the LL values,it is possible to assess other basic engineering properties of clays.展开更多
This study is concerned with describing the thermodynamic equilibrium of the saturated fluid with and without a free surface area A. Discussion of the role of A as system variable of the interface phase and an estimat...This study is concerned with describing the thermodynamic equilibrium of the saturated fluid with and without a free surface area A. Discussion of the role of A as system variable of the interface phase and an estimate of the ratio of the respective free energies of systems with and without A show that the system variables given by Gibbs suffice to describe the volumetric properties of the fluid. The well-known Gibbsian expressions for the internal energies of the two-phase fluid, namely for the vapor and for the condensate (liquid or solid), only differ with respect to the phase-specific volumes and . The saturation temperature T, vapor presssure p, and chemical potential are intensive parameters, each of which has the same value everywhere within the fluid, and hence are phase-independent quantities. If one succeeds in representing as a function of and , then the internal energies can also be described by expressions that only differ from one another with respect to their dependence on and . Here it is shown that can be uniquely expressed by the volume function . Therefore, the internal energies can be represented explicitly as functions of the vapor pressure and volumes of the saturated vapor and condensate and are absolutely determined. The hitherto existing problem of applied thermodynamics, calculating the internal energy from the measurable quantities T, p, , and , is thus solved. The same method applies to the calculation of the entropy, chemical potential, and heat capacity.展开更多
Objective This study aimed to investigate the correlation between the surface area ratio of medial tibial plateau(MTP)to lateral tibial plateau(LTP)and the mechanical tibiofemoral angle(mTFA).Methods Lower limb comput...Objective This study aimed to investigate the correlation between the surface area ratio of medial tibial plateau(MTP)to lateral tibial plateau(LTP)and the mechanical tibiofemoral angle(mTFA).Methods Lower limb computed tomography(CT)images were collected at our hospital.Then,the original CT data were analyzed and reconstructed using medical image processing software.The proximal and distal centres of the femur and tibia were marked.The surface areas of MTP and LTP were identified using image processing software.GraphPad Prism 8.0.2 was used to perform the statistical analysis.Results The surface area ratio of MTP to LTP was significantly correlated with the mTFA in all patients(P<0.0001),male group(P<0.0001),female group(P<0.0001),varus group(P<0.0001),and valgus group(P=0.002).Furthermore,the surface area of MTP and LTP was significantly greater in the male group than in the female group(P<0.0001).There was significant difference in the surface area of the MTP between the varus and valgus groups(P<0.0001).Significant difference was also observed in the surface area ratio of MTP to LTP between the varus and valgus groups(P<0.0001).Conclusion The surface area ratio of MTP to LTP was correlated with the mTFA.Within a certain range,the smaller the mTFA,the greater the surface area ratio of MTP to LTP.For patients undergoing total knee arthroplasty,of whom the surface area of the MTP was basically equal to that of the LTP,it is recommended that the osteotomy should be performed in accordance with mechanical alignment standards,and that a symmetrical tibial plateau prosthesis should be used.For patients whose surface area of MTP is significantly greater than that of the LTP,it is recommended that the osteotomy should be performed in accordance with kinematic alignment standards,and that an anatomical tibial plateau prosthesis should be used.展开更多
To provide enough space to carry all surface charges responsible for high cation exchange capacity of plant roots, large area of the root specific surface is necessary, however all experimental methods used up to date...To provide enough space to carry all surface charges responsible for high cation exchange capacity of plant roots, large area of the root specific surface is necessary, however all experimental methods used up to date give too small surface area values. In this paper, we propose to measure the plant roots surface area using water vapor adsorption isotherm. This method gives roots specific surface areas compatible to CEC. Methodical aspects of the measurements are described along with theoretical background for calculating specific surface area on the example of roots of barley grown in nutrient solution.展开更多
文摘More than 500 datasets from the literature have been used to evaluate the relationships of specific surface area (SSA),cation exchange capacity (CEC) and activity versus the liquid limit (LL).The correlations gave R^2 values ranging between 0.71 and 0.92.Independent data were also used to validate the correlations.Estimated SSA values slightly overestimate the measured SSA up to 100 m^2/g.Regarding the estimated CEC values,they overestimated the measured CEC values up to 20 meq/(100 g).A probabilistic approach was performed for the correlations of SSA,CEC and activity versus LL.The analysis shows that the relations of SSA,CEC and activity with LL are robust.Using the LL values,it is possible to assess other basic engineering properties of clays.
文摘This study is concerned with describing the thermodynamic equilibrium of the saturated fluid with and without a free surface area A. Discussion of the role of A as system variable of the interface phase and an estimate of the ratio of the respective free energies of systems with and without A show that the system variables given by Gibbs suffice to describe the volumetric properties of the fluid. The well-known Gibbsian expressions for the internal energies of the two-phase fluid, namely for the vapor and for the condensate (liquid or solid), only differ with respect to the phase-specific volumes and . The saturation temperature T, vapor presssure p, and chemical potential are intensive parameters, each of which has the same value everywhere within the fluid, and hence are phase-independent quantities. If one succeeds in representing as a function of and , then the internal energies can also be described by expressions that only differ from one another with respect to their dependence on and . Here it is shown that can be uniquely expressed by the volume function . Therefore, the internal energies can be represented explicitly as functions of the vapor pressure and volumes of the saturated vapor and condensate and are absolutely determined. The hitherto existing problem of applied thermodynamics, calculating the internal energy from the measurable quantities T, p, , and , is thus solved. The same method applies to the calculation of the entropy, chemical potential, and heat capacity.
基金the National Natural Science Foundation of China(No.81672155).
文摘Objective This study aimed to investigate the correlation between the surface area ratio of medial tibial plateau(MTP)to lateral tibial plateau(LTP)and the mechanical tibiofemoral angle(mTFA).Methods Lower limb computed tomography(CT)images were collected at our hospital.Then,the original CT data were analyzed and reconstructed using medical image processing software.The proximal and distal centres of the femur and tibia were marked.The surface areas of MTP and LTP were identified using image processing software.GraphPad Prism 8.0.2 was used to perform the statistical analysis.Results The surface area ratio of MTP to LTP was significantly correlated with the mTFA in all patients(P<0.0001),male group(P<0.0001),female group(P<0.0001),varus group(P<0.0001),and valgus group(P=0.002).Furthermore,the surface area of MTP and LTP was significantly greater in the male group than in the female group(P<0.0001).There was significant difference in the surface area of the MTP between the varus and valgus groups(P<0.0001).Significant difference was also observed in the surface area ratio of MTP to LTP between the varus and valgus groups(P<0.0001).Conclusion The surface area ratio of MTP to LTP was correlated with the mTFA.Within a certain range,the smaller the mTFA,the greater the surface area ratio of MTP to LTP.For patients undergoing total knee arthroplasty,of whom the surface area of the MTP was basically equal to that of the LTP,it is recommended that the osteotomy should be performed in accordance with mechanical alignment standards,and that a symmetrical tibial plateau prosthesis should be used.For patients whose surface area of MTP is significantly greater than that of the LTP,it is recommended that the osteotomy should be performed in accordance with kinematic alignment standards,and that an anatomical tibial plateau prosthesis should be used.
文摘To provide enough space to carry all surface charges responsible for high cation exchange capacity of plant roots, large area of the root specific surface is necessary, however all experimental methods used up to date give too small surface area values. In this paper, we propose to measure the plant roots surface area using water vapor adsorption isotherm. This method gives roots specific surface areas compatible to CEC. Methodical aspects of the measurements are described along with theoretical background for calculating specific surface area on the example of roots of barley grown in nutrient solution.
