In order to evaluate the tendency of mechanical properties degrudation due to weld-ing and other processing in materials used for supporting coils in super conducting rnaguets utilized in thermonuclear jusion reactore...In order to evaluate the tendency of mechanical properties degrudation due to weld-ing and other processing in materials used for supporting coils in super conducting rnaguets utilized in thermonuclear jusion reactore, a small punch (SP) test was used.This test, which was originally developed to study irradiation damage using miniatursized specimens was performed at 77 and 4 K for solution treated and sensitized JN1 austenitic stainless steel, a candidate cryogenic structural material. The area under the load-deflection curve up to the maximum applied load in SP test was defined as the SP enerpy, to characterize the resistance to fracture. Although solution treated material exhibited ductile fracture mode with high SP enerpy, embrittlement behavior due to sensitization at 650-800°for 1-5 h was shown clearlg by SP test with brittle intergranular fracture and decreased SP enerpy. Comparison of the results obtained by SP test with those by fracture toughness test showed the usefulness of SP test for evaluation of sensitization induced embrittlement at cryogenic temperature. The re-sults obtained in this study can be very usefol in predicting the degradation due to welding and other processing in cryogenic materials.展开更多
The method,in which a few carats of diamond grits are placed inside a capsule together with a steel ball,shaken for a number of times,and the unbroken ratio of the grits is then used to evaluate the quality of the dia...The method,in which a few carats of diamond grits are placed inside a capsule together with a steel ball,shaken for a number of times,and the unbroken ratio of the grits is then used to evaluate the quality of the diamond,has been well established for many years.However,the unbroken percentage,in an equivalent view,represents the impact toughness of the grits and cannot reflect the value of the crushing energy.Most of the previous empirical formulas obtained from experiments by scholars cannot be applied to practical tests.In this paper,a dimensional analysis was applied to investigate the impact toughness experiment,and the dimensionless relationship has been built among those variables such as the toughness index,the impact time,the impact frequency and the crushing energy per unit area.According to the results of a large number of experiments with synthetic diamond grits of mesh size 45/50,the percentage of the broken grits H is proportional to the impact time T^(1.14) when the impact frequency is 2400 r/min,and the impact frequency f^(2.576) when the number of impacts is 2000.展开更多
The phase composition, phase transition and phase structure transformation of the wire-cut section of functionally graded WC-Co cemented carbide with dual phase structure were investigated by XRD phase analysis. It is...The phase composition, phase transition and phase structure transformation of the wire-cut section of functionally graded WC-Co cemented carbide with dual phase structure were investigated by XRD phase analysis. It is shown that the composition of η phase in the core zone is Co_3W_3C (M_6 C type). The structure of cobalt based solid solution binder phase is fcc type. At the cooling stage of the sintering process, the phase transition of η phase, i.e. M_6C→M_12C and the martensitic phase transition of the cobalt based solid solution binder phase, i.e. fcc→hcp are suppressed, which facilitates the strengthening of the alloy. Because the instantaneous temperature of the discharge channel is as high as 10 000 ℃ during the wire cutting process, the processed surface is oxidized. Nevertheless, the oxide layer thickness is in micro grade. In the oxide film, η phase is decomposed into W_2C and CoO, and cobalt based solid solution binder is selectively oxidized, while WC remains stable due to the existence of carbon containing liquid organic cutting medium.展开更多
文摘In order to evaluate the tendency of mechanical properties degrudation due to weld-ing and other processing in materials used for supporting coils in super conducting rnaguets utilized in thermonuclear jusion reactore, a small punch (SP) test was used.This test, which was originally developed to study irradiation damage using miniatursized specimens was performed at 77 and 4 K for solution treated and sensitized JN1 austenitic stainless steel, a candidate cryogenic structural material. The area under the load-deflection curve up to the maximum applied load in SP test was defined as the SP enerpy, to characterize the resistance to fracture. Although solution treated material exhibited ductile fracture mode with high SP enerpy, embrittlement behavior due to sensitization at 650-800°for 1-5 h was shown clearlg by SP test with brittle intergranular fracture and decreased SP enerpy. Comparison of the results obtained by SP test with those by fracture toughness test showed the usefulness of SP test for evaluation of sensitization induced embrittlement at cryogenic temperature. The re-sults obtained in this study can be very usefol in predicting the degradation due to welding and other processing in cryogenic materials.
基金Supported by the National Natural Science Foundation of China(11572047)
文摘The method,in which a few carats of diamond grits are placed inside a capsule together with a steel ball,shaken for a number of times,and the unbroken ratio of the grits is then used to evaluate the quality of the diamond,has been well established for many years.However,the unbroken percentage,in an equivalent view,represents the impact toughness of the grits and cannot reflect the value of the crushing energy.Most of the previous empirical formulas obtained from experiments by scholars cannot be applied to practical tests.In this paper,a dimensional analysis was applied to investigate the impact toughness experiment,and the dimensionless relationship has been built among those variables such as the toughness index,the impact time,the impact frequency and the crushing energy per unit area.According to the results of a large number of experiments with synthetic diamond grits of mesh size 45/50,the percentage of the broken grits H is proportional to the impact time T^(1.14) when the impact frequency is 2400 r/min,and the impact frequency f^(2.576) when the number of impacts is 2000.
基金Projects(50323008, 50574104) supported by the National Natural Science Foundation of ChinaProject (04JJ3084) supported by the Natural Science Foundation of Hunan Province, China
文摘The phase composition, phase transition and phase structure transformation of the wire-cut section of functionally graded WC-Co cemented carbide with dual phase structure were investigated by XRD phase analysis. It is shown that the composition of η phase in the core zone is Co_3W_3C (M_6 C type). The structure of cobalt based solid solution binder phase is fcc type. At the cooling stage of the sintering process, the phase transition of η phase, i.e. M_6C→M_12C and the martensitic phase transition of the cobalt based solid solution binder phase, i.e. fcc→hcp are suppressed, which facilitates the strengthening of the alloy. Because the instantaneous temperature of the discharge channel is as high as 10 000 ℃ during the wire cutting process, the processed surface is oxidized. Nevertheless, the oxide layer thickness is in micro grade. In the oxide film, η phase is decomposed into W_2C and CoO, and cobalt based solid solution binder is selectively oxidized, while WC remains stable due to the existence of carbon containing liquid organic cutting medium.