Numerical Simulation of Dynamic Response of Towed Systems

In this paper, the dynamic response of undersea -+towed systems is numerically simulated. A two body towed system is especially considered in detail. The factors influencing the heave of towed-bodies, such as the weight of the towed-body (in sea water), the length and the weight (in sea water) per unit length of the cable between towed-bodies and towing ship, are investigated in detail. Calculations show that the two-body towed system can greatly increases the stability of the towed system.

Dynamic Analysis of Towed and Variable Length Cable Systems

Towed cable systems are frequently used in marine measurements where the length of the towed cable varies during launch and recovery. In this paper a novel method for modeling variable length cable systems is introduced based on the finite segment formulation. The variable length of the towed cable is described by changing the length of the segment near the towing point and by increasing or decreasing the number of the discrete segments of the cable. In this way, the elastic effects of the cable can be easily handled since geometry and material properties of each segment are kept constant. Experimental results show that the dynamic behavior of the towed cable is consistent between the model and the physical cable. Results show that the model provides numerical efficiency and simulation accuracy for the variable length towed system.

Analysis of the Dynamic System of Wave Glider with a Towed Body

Mobile observation platforms are widely used in oceanographic and marine resource exploration and other applications. Wave Glider is a mobile platform that can transform wave energy into locomotion power and overcome the bottleneck of low energy supply. Wave Glider has recently been applied to tow underwater sensors fulfilling observation tasks. In this paper, the dynamic system of Wave Glider with a towed body is studied by applying multibody mechanics, and the relevant motion conditions of the system are investigated. Dynamic models of Wave Glider with a towed body and tether are first developed individually and then integrated into a whole model. The numerical method is used to obtain the dynamic responses and assess performance of the towed body pulled by the submerged glider of Wave Glider. The effects of sea state, mass of the towed body, and length of the towed cable are investigated on the basis of simulation results. This work can be used for the design and analysis of Wave Glider-towed body systems.

Dynamic Effect Research of Cable-Lead-In Rod on Towed System

This paper aims to research the cable-lead-in rod effect on a towed system through mathematical modeling and numerical simulations.The rod dynamics,as a key part of this study,is modeled using the combination of cable node governing equations and kinematic constraint conditions.As the first attempt to analyze such a problem,the rod is simply treated as an elastic cable segment so as to be incorporated into the dynamics of the cable,and a set of algorithm is then proposed based on the kinematic constraint conditions to fully describe its motions.Meanwhile,the cable and the underwater vehicle are modeled by the traditional lumped mass method and the 6 degree-of-freedom maneuverability equations for submarines respectively;the coupling boundary conditions besides the rod dynamics are also given to form the whole system's model.Several numerical cases are performed to investigate the rod effect on the system in different maneuver situations.Some meaningful conclusions are drawn through comparative analysis.

Trajectory planning for multi-robot coordinated towing system based on stability

Given the unconstrained characteristics of the multi-robot coordinated towing system,the rope can only provide a unidirectional constraint force to the suspended object,which leads to the weak ability of the system to resist external disturbances and makes it difficult to control the trajectory of the suspended object.Based on the kinematics and statics of the multi-robot coordinated towing system with fixed base,the dynamic model of the system is established by using the Newton-Euler equations and the Udwadia-Kalaba equations.To plan the trajectories with high stability and strong control,trajectory planning is performed by combining the dynamics and stability of the towing system.Based on the dynamic stability of the motion trajectory of the suspended object,the stability of the suspended object is effectively improved through online real-time planning and offline manual adjustment.The effectiveness of the proposed method is verified by comparing the motion stability of the suspended object before and after planning.The results provide a foundation for the motion planning and coordinated control of the towing system.

Deghosting towed streamer data in τ/p domain based on rough sea surface reflectivity

Currently, the deghosting of towed streamer seismic data assumes a flat sea level and a sea-surface reflection coefficient of-1; this decreases the precision of deghosting. A new method that considers the rough sea surface is proposed to suppress ghost reflections. The proposed deghosting method obtains the rough sea surface reflection coefficient using Gaussian statistics, and calculates the optimized deghosting operator in the r/p domain. The proposed method is closer to the actual sea conditions, offers an improved deghosting operator, removes the ghost reflections from marine towed seismic data, widens the bandwidth and restores the low-frequency information, and finally improves the signal-to- noise ratio and resolution of the seismic data.

Analyzing Parabolic Profile Path for Underwater Towed-Cable

This article discusses the dynamic state analysis of underwater towed-cable when tow-ship changes its speed in a direction making parabolic profile path. A three-dimensional model of underwater towed system is studied. The established governing equations for the system have been solved using the central implicit finite-difference method. The obtained difference non-linear coupled equations are solved by Newton＇s method and satisfactory results were achieved. The solution of this problem has practical importance in the estimation of dynamic loading and motion, and hence it is directly applicable to the enhancement of safety and the effectiveness of the offshore activities.

Comparison of marine controlled-source electromagnetic data acquisition systems by a reservoir sensitivity index:analyzing the effect of water depths

During the past ten years, a marine controlled source electromagnetic（CSEM） method has been developed rapidly as a technology for hydrocarbon exploration. For shallow water environments, two CSEM data acquisition systems： Seabed Logging（SBL） and towed streamer electromagnetics（TSEM） have been developed in recent years. The purpose is to compare the performance of the SBL and TSEM systems at different water depths. Three different methods for the comparison are presented. The first method is a quick one dimensional sensitivity modelling. As a result, the sensitivity of marine CSEM data increases with water depth for the SBL system. Further, the sensitivity decreases with the increasing water depth for the TSEM system. The two other methods use two dimensional synthetic data from a simple 2-D isotropic model. The second method is a reservoir sensitivity index（RSI） method which has been developed to provide a quick comparison of the two systems. The RSI is calculated as the amplitude of the scattered field dividing by data uncertainty. From the calculations, it is found that with the increasing water depth RSI increases for the SBL system, while it decreases for the TSEM system. The third method uses Occam＇s inversion, and applies an anomaly transverse resistance（ATR） ratio for evaluating the resulting resistivity image. In shallow water environments, the resolution of the CSEM inversion results is good for both the SBL and TSEM systems. In deep water environments, the resolution of the CSEM inversion is better for the SBL system than for the TSEM system. The ATR ratios of the resistivity images show the similar conclusion. The SBL data acquisition system has an advantage in deep water environments. The TSEM system, on the other hand, is preferable for the shallow water environments.

Steady State Analysis of Towed Marine Cables

Efficient numerical schemes were presented for the steady state solutions of towed marine cables. For most of towed systems,the steady state problem can be resolved into two-point boundary-value problem,or initial value problem in some special cases where the initial values are available directly.A new technique was proposed and attempted to solve the two-point boundary-value problem rather than the conventional shooting method due to its algorithm complexity and low efficiency.First,the boundary conditions are transformed into a set of nonlinear governing equations about the initial values,then bisection method is employed to solve these nonlinear equations with the aid of 4th order Runge-Kutta method.In common sense,non-uniform (sheared) current is assumed,which varies in magnitude and direction with depth.The schemes are validated through the DE Zoysa's example,then several numerical examples are also presented to illustrate the numerical schemes.

Dynamic Response Analysis of Towed Cable During Deployment/Retrieval

A numerical approach was developed to analyze the transient behavior of towed cable during ac- tively controlled deployment/retrieval (DR).The cable motion is described by the lumped parameter method, its corresponding boundary conditions are presented.In view of its varying length during DR,two auxiliary arguments are introduced to describe its continuous varying length and discrete number of nodes(equations), the length is determined by the pay out(or reel-in) rate,which is then used to determine the node number by a logic relation.For the discrete mathematical model of towed cable,an algorithm was developed to deal with the discrete governing equations.The simulation results indicate that the cable experiences more com- plex motions due to its varying length,and tension fluctuates seriously in the startup and ending stage of deployment/retrieval.The effect of towing ship's motion in waves on cable during deployment/retrieval is also considered via numerical simulation.

Acoustic multipath structure in direct zone of deep water and bearing estimation of tow ship noise of towed line array

In the towed line array sonar system,the tow ship noise is the main factor that affects the sonar performance.Conventional noise cancelling methods assume that the noise is towards the endfire direction of the array.An acoustic experiment employing a towed line array is conducted in the western Pacific Ocean,and a strange bearing-splitting phenomenon of the tow ship noise is observed in the array.The tow ship noise is split into multiple noise signals whose bearings are distributed between 10°and 90°deviating from the endfire direction.The multiple interferences increase the difficulty in recognizing the target for the sonar operator and noise cancellation.Therefore,making the mechanism clear and putting forward the tow ship noise splitting bearing estimation method are imperative.In this paper,the acoustic multi-path structure of the tow ship in deep water is analyzed.Then it is pointed out that the bearing-splitting phenomenon is caused by the main lobe of direct rays and bottom-reflected rays,as well as several side lobes of direct rays.Meanwhile,the indistinguishability between the elevation angle and the bearing angle due to the axial symmetry of a strict horizontal line array causes the bearing to deviate from the endfire direction.Based on the theory above,a method of estimating bearing of the tow ship noise in deep water is proposed.The theoretical analysis results accord with the experimental results,which helps to identify the target and provide correct initial bearing guidance for noise cancelation methods.

Study on the Configuration of Towed Flexible Cables

Based on the fundamental equation of flexible cable dynamics for a towed system, an easily solved mathematical model is set up in this paper by means of appropriate simplification. Several regular patterns of spatial motion of towed flexible cables in water are obtained through numerical simulation with the finite difference method, and then modification and verification by trial results at sea. A technical support is provided for the towing ship to maneuver properly when a flexible cable is towed. Furthermore, the relations between two towed flexible cables, which are towed simultaneously by a ship, are investigated. The results show that the ship towing two flexible cables is safe under the suggested arrangement of two winches for the towing system, and the coiling/uncoiling sequences of the cables as well as the suggested way of maneuvering.

Two-dimensional DOA estimation based on thin array towed by a small autonomous platform

The small autonomous platform with a thin line array is an important tool for underwater acoustic mobile surveillance.Generally,only one-dimensional(1-D)direction-of-arrival(DOA)of the source signal can be estimated using a thin towed line array.In this work,the two-dimensional(2-D)DOA estimation is achieved by the thin line array towed by a small autonomous platform due to its flexible maneuver.Two perpendicular tow paths are formed through the fast turning of this array.An L-shaped array is formed by the same towed array on these two tow paths at different times.Using the array on these two straight paths,two 1-D DOAs of the source signal are obtained respectively,and then the 2-D DOA based on the formed L-shaped array can be estimated.The effectiveness of proposed approach is verified by numerical simulations and its theoretical error is analyzed.

Torsional Vibration Analysis of an FR Driveline System

Towing tractor drivelines are lightly damped non-linear systems. Interactions between components can cause dynamic behavors such as gear gap impact in gear transmissions, shuffle and clonk phenomena in driveline. The torsional vibration of driveline has an important effect on grand engineering vehicle vibration and noise. Through analyzing torsional vibration equations of driveline, torsional vibration model of driveline is developed by using Matlab/Simulink software, Shuffle and clonk phenomena are observed in torsional vibration. The modeling method of analysizing driveline torsional vibration can be used to research and improve similar engineering vehicle driveline behavors.

Research on the Motion Track of Ocean Towing System

In this paper, a method for predicting the position of towline is presented. The location of the finite node is determined by installing fixed spaced attitude sensors in towline arrays, then the appropriate objective functions are selected for water depth profile and course profile respectively, and the interpolation fitting method is combined with the determined predicted positions. Through the hydrodynamic analysis of the existing towing cable’s underwater motion, the position of the towing cable under the steady state motion is obtained as the reference basis, and two methods are put forward, which are improved spline interpolation method, polynomial fitting method and multivariate nonlinear regression analysis. In the case of steady state motion, the two methods are compared and compared with the hydrodynamic simulation results. Finally, a more suitable method is selected as the basis of cable location inversion and applied to deep-sea towing operations.

Study of the Lift Force Induced by An Interceptor on A High-Speed Mono-Hull:The Affecting Factors and Estimation Formula

To find a better way to estimate the lift force induced by an interceptor on a high-speed mono-hull ship,a series of high-speed mono-hull ship models are designed and investigated under different conditions.Different lift forces are obtained by numerical calculations and validated by a model test in a towing tank.The factors that influence the force are the interceptor height,velocity,draft,and deadrise angle.The relationship between each factor and the induced lift force is investigated and obtained.We found that the induced lift mainly depends on the interceptor height and advancing velocity,and is proportional to the square of the interceptor height and velocity.The results also showed that the effects of the draft and deadrise angle are relatively less important,and the relationship between the induced lift and these two factors is generally linear.Based on the results,a formula including the combined effect of all factors used to estimate the lift force induced by the interceptor is developed based on systematic analysis.The proposed formula could be used to estimate the lift force induced by interceptors,especially under high-speed condition.

Experimental Study on Towing Characteristics of Composite Bucket Wellhead Platform

With the rapid development of large-scale development of marginal oilfields in China,simple wellhead platforms that are simple in structure and easy to install have become an inevitable choice in the process of oilfield development.However,traditional simple wellhead platforms are often discarded after a single use.In pursuit of a more costeffective approach to developing marginal oilfields,this paper proposes a new offshore oil field development facility—an integrated bucket foundation for wellhead platform.To verify the safety of its towing behavior and obtain the dynamic response characteristics of the structure,this paper takes a bucket integrated bucket foundation for wellhead platform with a diameter of 40 m as the research object.By combining physical model tests and numerical simulations,it analyzes the static stability and dynamic response characteristics of the structure during towing,complete with the effects of the draft,wave height,wave period,and towing point height,which produce the dynamic responses of the structure under different influence factors,such as roll angle,pitch angle,heave acceleration and towing force as well as the sensibility to transport variables.The results show that the integrated bucket foundation for wellhead platform is capable of self-floating towing,and its movement is affected by the local environment,which will provide a reference for actual projects.

Analysis and Verification on Buckling Mechanism of Spatial Tow Steering in Automated Fiber Placement

Automated fiber placement(AFP)enables the efficient and precise fabrication of complex-shaped aerospace composite structures with lightweight and high-performance properties.However,due to the excessive compression on the inner edge of the tow placed along the curved trajectory,the resulting defects represented by buckling and wrinkles in spatial tow steering can induce poor manufacturing accuracy and quality degradation of products.In this paper,a theoretical model of tow buckling based on the first-order shear deformation laminate theory,linear elastic adhesion interface and Hertz compaction contact theory is proposed to analyze the formation mechanism of the wrinkles and predict the formation of defects by solving the critical radius of the trajectory,and finite element analysis involving the cohesive zone modeling(CZM)is innovated to simulate the local buckling state of the steered tow in AFP.Additionally,numerical parametric studies and experimental results indicate that mechanical properties and geometric parameters of the prepreg,the curvature of the placement trajectory and critical process parameters have a significant impact on buckling formation,and optimization of process parameters can achieve effective suppression of placement defects.This research proposes a theoretical modeling method for tow buckling,and conducts in-depth research on defect formation and suppression methods based on finite element simulation and placement experiments.

基于TOWS分析的农村集体经营性建设用地入市研究

采用TOWS理论,结合在河北、江苏等地的实地调研成果,分析我国农村集体经营性建设用地入市的挑战、机遇、劣势和优势。分析认为,当前农村集体经营性建设用地入市存在地区差异大、收益难分配、村民乡土情结深厚、政策宣传不到位等问题,但得益于乡村振兴政策和城乡一体化进程,入市改革又存在着很强的发展潜力。入市改革不宜“指标化”的无序推进,而应以农民根本利益为核心,从有序扩大入市规模、放活入市标准、完善收益分配、强化政校联动等方面入手,推动集体经营性建设用地入市工作的进一步展开。

基于TOWS理论审视我国体育旅游发展战略——以河南省体育旅游开发为例

将战略规划的系统方法——TWOS分析引入河南省体育旅游发展战略规划实践。研究认为,区域体育旅游的发展战略关系到体育旅游发展的全局性、根本性问题,是区域体育旅游取得持续发展的决定性因素。据此认为,河南省体育旅游的开发应围绕特色文化、区域合作、体制创新、产品整合、相对优势、品牌和形象主导制定战略规划。