Concentrating solar thermal power system can provide low carbon,renewable energy resources in countries or regions with strong solar irradiation.For this kind of power plant which is likely to be located in the arid a...Concentrating solar thermal power system can provide low carbon,renewable energy resources in countries or regions with strong solar irradiation.For this kind of power plant which is likely to be located in the arid area,natural draft dry cooling tower is a promising choice.To develop the experimental studies on small cooling tower,a 20 m high natural draft dry cooling tower with fully instrumented measurement system was established by the Queensland Geothermal Energy Centre of Excellence.The performance of this cooling tower was measured with the constant heat input of 600 kW and 840 kW and with ambient temperature ranging from 20 ℃ to 32 ℃.The cooling tower numerical model was refined and validated with the experimental data.The model of 1 MW concentrating solar thermal supercritical CO2 power cycle was developed and integrated with the cooling tower model.The influences of changing ambient temperature and the performance of the cooling tower on efficiency of the power system were simulated.The differences of the mechanism of the ambient temperature effect on Rankine cycle and supercritical CO2 Brayton cycle were analysed and discussed.展开更多
The purpose of this study is to improve the efficiency of the power generation system of a solar tower using fluid dynamics. The power generation system of a solar tower can be designed and constructed at relatively l...The purpose of this study is to improve the efficiency of the power generation system of a solar tower using fluid dynamics. The power generation system of a solar tower can be designed and constructed at relatively low cost. However, the energy output tends to be low for its physical size compared with other renewable energy production systems. The technical and scientific improvement of these types of generation systems has lost its momentum since the shutdown of the wellknown Spanish pilot plant “Manzanares Solar Chimney” in 1989, although it still has the potential to play a role in renewable energy in the future. We have focused on the tower component of the system to seek possible enhancements of the power output of the internal turbine. As a result of our fluid dynamic shape optimization, a diffuser-shaped tower was employed to increase the internal flow speed of a scaled model. The results show a remarkable improvement in the power output of the internal wind turbine.展开更多
The receiver is an important element in solar energy plants.The principal receiver’s tubes in power plants are devised to work under extremely severe conditions,including excessive heat fluxes.Half of the tube’s cir...The receiver is an important element in solar energy plants.The principal receiver’s tubes in power plants are devised to work under extremely severe conditions,including excessive heat fluxes.Half of the tube’s circumference is heated whilst the other half is insulated.This study aims to improve the heat transfer process and reinforce the tubes’structure by designing a new receiver;by including longitudinal fins of triangular,circular and square shapes.The research is conducted experimentally using Reynolds numbers ranging from 28,000 to 78,000.Triangular fins have demonstrated the best improvement for heat transfer.For Reynolds number value near 43,000 Nusselt number(Nu)is higher by 3.5%and 7.5%,sequentially,compared to circular and square tube fins,but varies up to 6.5%near Re=61000.The lowest friction factor is seen in a triangular fin receiver;where it deviates from circular fins by 4.6%,and square fin tubes by 3.2%.Adding fins makes the temperature decrease gradually,and in the case of no fins,the temperature gradient between the hot tube and water drops sharply in the planed tube by 7%.展开更多
The original online version of this article (Masataka Motoyama, Kenichiro Sugitani, Yuji Ohya, et al. (2014) “Improving the Power Generation Performance of a Solar Tower Using Thermal Updraft Wind”, 2014, 6, 362-370...The original online version of this article (Masataka Motoyama, Kenichiro Sugitani, Yuji Ohya, et al. (2014) “Improving the Power Generation Performance of a Solar Tower Using Thermal Updraft Wind”, 2014, 6, 362-370. http://dx.doi.org/10.4236/epe.2014.611031) was published in October, 2014.The author wishes to correct the following error in text and Figures 9-11.展开更多
The Beijing 325-m Meteorological Tower (325MT) is used to observe the vertical variation of solar radiation. Results of the experiments indicate that the automatic radiation monitoring system, including a sun tracker ...The Beijing 325-m Meteorological Tower (325MT) is used to observe the vertical variation of solar radiation. Results of the experiments indicate that the automatic radiation monitoring system, including a sun tracker and data collection system, works well and all the specifications meet WMO observation standards. The measurement data show that there is a significant radiation decrease from 320 m to the surface, where the difference is only about 30 W m-2 on light air-pollution days, while the maximum reaches about 110 W m-2 when heavy pollution appears near the ground. The global UV radiation decreases on heavy air-pollution days and under poor visibility conditions, and the difference between 300 m and 8 m is larger than on clear days.展开更多
文摘Concentrating solar thermal power system can provide low carbon,renewable energy resources in countries or regions with strong solar irradiation.For this kind of power plant which is likely to be located in the arid area,natural draft dry cooling tower is a promising choice.To develop the experimental studies on small cooling tower,a 20 m high natural draft dry cooling tower with fully instrumented measurement system was established by the Queensland Geothermal Energy Centre of Excellence.The performance of this cooling tower was measured with the constant heat input of 600 kW and 840 kW and with ambient temperature ranging from 20 ℃ to 32 ℃.The cooling tower numerical model was refined and validated with the experimental data.The model of 1 MW concentrating solar thermal supercritical CO2 power cycle was developed and integrated with the cooling tower model.The influences of changing ambient temperature and the performance of the cooling tower on efficiency of the power system were simulated.The differences of the mechanism of the ambient temperature effect on Rankine cycle and supercritical CO2 Brayton cycle were analysed and discussed.
文摘The purpose of this study is to improve the efficiency of the power generation system of a solar tower using fluid dynamics. The power generation system of a solar tower can be designed and constructed at relatively low cost. However, the energy output tends to be low for its physical size compared with other renewable energy production systems. The technical and scientific improvement of these types of generation systems has lost its momentum since the shutdown of the wellknown Spanish pilot plant “Manzanares Solar Chimney” in 1989, although it still has the potential to play a role in renewable energy in the future. We have focused on the tower component of the system to seek possible enhancements of the power output of the internal turbine. As a result of our fluid dynamic shape optimization, a diffuser-shaped tower was employed to increase the internal flow speed of a scaled model. The results show a remarkable improvement in the power output of the internal wind turbine.
文摘The receiver is an important element in solar energy plants.The principal receiver’s tubes in power plants are devised to work under extremely severe conditions,including excessive heat fluxes.Half of the tube’s circumference is heated whilst the other half is insulated.This study aims to improve the heat transfer process and reinforce the tubes’structure by designing a new receiver;by including longitudinal fins of triangular,circular and square shapes.The research is conducted experimentally using Reynolds numbers ranging from 28,000 to 78,000.Triangular fins have demonstrated the best improvement for heat transfer.For Reynolds number value near 43,000 Nusselt number(Nu)is higher by 3.5%and 7.5%,sequentially,compared to circular and square tube fins,but varies up to 6.5%near Re=61000.The lowest friction factor is seen in a triangular fin receiver;where it deviates from circular fins by 4.6%,and square fin tubes by 3.2%.Adding fins makes the temperature decrease gradually,and in the case of no fins,the temperature gradient between the hot tube and water drops sharply in the planed tube by 7%.
文摘The original online version of this article (Masataka Motoyama, Kenichiro Sugitani, Yuji Ohya, et al. (2014) “Improving the Power Generation Performance of a Solar Tower Using Thermal Updraft Wind”, 2014, 6, 362-370. http://dx.doi.org/10.4236/epe.2014.611031) was published in October, 2014.The author wishes to correct the following error in text and Figures 9-11.
文摘The Beijing 325-m Meteorological Tower (325MT) is used to observe the vertical variation of solar radiation. Results of the experiments indicate that the automatic radiation monitoring system, including a sun tracker and data collection system, works well and all the specifications meet WMO observation standards. The measurement data show that there is a significant radiation decrease from 320 m to the surface, where the difference is only about 30 W m-2 on light air-pollution days, while the maximum reaches about 110 W m-2 when heavy pollution appears near the ground. The global UV radiation decreases on heavy air-pollution days and under poor visibility conditions, and the difference between 300 m and 8 m is larger than on clear days.
