A procedure of low temperature solid-phase sintering（LTSS） was carried out to fabricate sintered metal fibrous media（SMFM） with high specific surface area.Stainless steel fibers which were produced by cutting proc...A procedure of low temperature solid-phase sintering（LTSS） was carried out to fabricate sintered metal fibrous media（SMFM） with high specific surface area.Stainless steel fibers which were produced by cutting process were first plated with a coarse copper coating layer by electroless plating process.A low-temperature sintering process was then completed at about 800 °C for 1 h under the protection of hydrogen atmosphere.The results show that a novel SMFM with complex surface morphology and high specific surface area（0.2 m2/g） can be obtained in this way.The effect of sintering temperature on the surface morphology and specific surface area of SMFM was studied by means of scanning electron microscopy and Brunauer-Emmett-Teller.The damage of micro-structure during the sintering process mainly contributed to the loss of specific surface area of SMFM and the optimal sintering temperature was 800 °C.展开更多
A solid-phase sintering process for the low-cost fabrication of composite micro-channels was developed. Three kinds of composite micro-channels with metallic porous structures were designed. The sintering process was ...A solid-phase sintering process for the low-cost fabrication of composite micro-channels was developed. Three kinds of composite micro-channels with metallic porous structures were designed. The sintering process was studied and optimized to obtain porous-structured micro-channels with high porosity. The flow resistance and heat transfer performance in the composite micro-channels were investigated. The composite micro-channels show acceptable flow resistance, significant enhancement of heat transfer and dramatic improvement of flow boiling stability, which indicates a promising prospect for the application in forced convective heat transfer.展开更多
The existing recycling and regeneration technologies have problems,such as poor regeneration effect and low added value of products for lithium(Li)-ion battery cathode materials with a low state of health.In this work...The existing recycling and regeneration technologies have problems,such as poor regeneration effect and low added value of products for lithium(Li)-ion battery cathode materials with a low state of health.In this work,a targeted Li replenishment repair technology is proposed to improve the discharge-specific capacity and cycling stability of the repaired LiCoO_(2) cathode materials.Compared with the spent cathode material with>50%Li deficiency,the Li/Co molar ratio of the regenerated LiCoO_(2) cathode is>0.9,which completely removes the Co_(3)O_(4) impurity phase formed by the decomposition of LixCoO_(2) in the failed cathode material after repair.The repaired LiCoO_(2) cathode mater-ials exhibit better cycling stability,lower electrochemical impedance,and faster Li^(+)diffusion than the commercial materials at both 1 and 10 C.Meanwhile,Li_(1.05)CoO_(2) cathodes have higher Li replenishment efficiency and cycling stability.The energy consumption and greenhouse gas emissions of LiCoO_(2) cathodes produced by this repair method are significantly reduced compared to those using pyrometallurgical and hydro-metallurgical recycling processes.展开更多
基金Project (50930005) supported by the National Natural Science Foundation of ChinaProject (U0834002) supported by the Key Programof NSFC-Guangdong Joint Funds of China+1 种基金Project (LYM09024) supported by Training Program for Excellent Young Teachers withInnovation of Guangdong University, ChinaProject (2009ZM0121) supported by the Fundamental Research Funds for the CentralUniversities of South China University of Technology,China
文摘A procedure of low temperature solid-phase sintering（LTSS） was carried out to fabricate sintered metal fibrous media（SMFM） with high specific surface area.Stainless steel fibers which were produced by cutting process were first plated with a coarse copper coating layer by electroless plating process.A low-temperature sintering process was then completed at about 800 °C for 1 h under the protection of hydrogen atmosphere.The results show that a novel SMFM with complex surface morphology and high specific surface area（0.2 m2/g） can be obtained in this way.The effect of sintering temperature on the surface morphology and specific surface area of SMFM was studied by means of scanning electron microscopy and Brunauer-Emmett-Teller.The damage of micro-structure during the sintering process mainly contributed to the loss of specific surface area of SMFM and the optimal sintering temperature was 800 °C.
基金Project(51146010)supported by the National Natural Science Foundation of ChinaProject(S2011040003189)supported by the Doctoral Research Fund of Guangdong Natural Science Foundation,ChinaProject supported by the Fundation of Key Laboratory of Surface Functional Structure Manufacturing of Guangdong Higher Education Institutes,South China University of Technology
文摘A solid-phase sintering process for the low-cost fabrication of composite micro-channels was developed. Three kinds of composite micro-channels with metallic porous structures were designed. The sintering process was studied and optimized to obtain porous-structured micro-channels with high porosity. The flow resistance and heat transfer performance in the composite micro-channels were investigated. The composite micro-channels show acceptable flow resistance, significant enhancement of heat transfer and dramatic improvement of flow boiling stability, which indicates a promising prospect for the application in forced convective heat transfer.
基金supported by the National Natural Science Foundation of China (Nos. 51972030 and 51772030)the S&T Major Project of Inner Mongolia Autonomous Region in China (No. 2020ZD0018)+1 种基金the Beijing Outstanding Young Scientists Program (No. BJJWZYJH01201910007023)the Guangdong Key Laboratory of Battery Safety (No. 2019B121203008)
文摘The existing recycling and regeneration technologies have problems,such as poor regeneration effect and low added value of products for lithium(Li)-ion battery cathode materials with a low state of health.In this work,a targeted Li replenishment repair technology is proposed to improve the discharge-specific capacity and cycling stability of the repaired LiCoO_(2) cathode materials.Compared with the spent cathode material with>50%Li deficiency,the Li/Co molar ratio of the regenerated LiCoO_(2) cathode is>0.9,which completely removes the Co_(3)O_(4) impurity phase formed by the decomposition of LixCoO_(2) in the failed cathode material after repair.The repaired LiCoO_(2) cathode mater-ials exhibit better cycling stability,lower electrochemical impedance,and faster Li^(+)diffusion than the commercial materials at both 1 and 10 C.Meanwhile,Li_(1.05)CoO_(2) cathodes have higher Li replenishment efficiency and cycling stability.The energy consumption and greenhouse gas emissions of LiCoO_(2) cathodes produced by this repair method are significantly reduced compared to those using pyrometallurgical and hydro-metallurgical recycling processes.
