Novel Distance Measures on Hesitant Fuzzy Sets Based on Equal-Probability Transformation and Their Application in Decision Making on Intersection Traffic Control

The purpose of this study is to reduce the uncertainty in the calculation process on hesitant fuzzy sets(HFSs).The innovation of this study is to unify the cardinal numbers of hesitant fuzzy elements(HFEs)in a special way.Firstly,a probability density function is assigned for any given HFE.Thereafter,equal-probability transformation is introduced to transform HFEs with different cardinal numbers on the condition into the same probability density function.The characteristic of this transformation is that the higher the consistency of the membership degrees in HFEs,the higher the credibility of the mentioned membership degrees is,then,the bigger the probability density values for them are.According to this transformation technique,a set of novel distance measures on HFSs is provided.Finally,an illustrative example of intersection traffic control is introduced to show the usefulness of the given distance measures.The example also shows that this study is a good complement to operation theories on HFSs.

Constrained optimal steady-state control for isolated traffic intersections

The steady-state or cyclic control problem for a simplified isolated traffic intersection is considered. The optimization problem for the green-red switching sequence is formulated with the help of a discrete-event max-plus model. Two steady-state control problems are formulated： optimal steady-state with green duration constraints, and optimal steady-state control with lost time. In the case when the criterion is a strictly increasing, linear function of the queue lengths, the steady-state control problems can be solved analytically. The structure of constrained optimal steady-state traffic control is revealed, and the effect of the lost time on the optimal solution is illustrated.

Analysis of occupation time of vehicles at urban unsignalized intersections in non-lane-based mixed traffic conditions

In India, traffic flow on roads is highly mixed in nature with wide variations in the static and dynamic characteristics of vehicles. At unsignalized intersections, vehicles generally do not follow lane discipline and ignore the rules of priority. Drivers generally become more aggressive and tend to cross the uncontrolled intersections without considering the conflicting traffic. All these conditions cause a very complex traffic situation at unsignal- ized intersections which have a great impact on the capacity and performance of traffic intersections. A new method called additive conflict flow （ACF） method is suitable to determine the capacity of unsignalized inter- sections in non-lane-based mixed traffic conditions as prevailing in India. Occupation time is the key parameter for ACF method, which is defined as the time spent by a vehicle in the conflict area at the intersection. Data for this study were collected at two three-legged unsignalized intersections （one is uncontrolled and other one is semi- controlled） in Mangalore city, India using video-graphic technique during peak periods on three consecutive week days. The occupation time of vehicles at these intersections were studied and compared. The data on conflicting traffic volume and occupation time by each subject vehicle at the conflict area were extracted from the videos using image processing software. The subject vehicles were divided into three categories： two wheelers,cars, and auto-rickshaws. Mathematical relationships were developed to relate the occupation time of different cate- gories of vehicles with the conflicting flow of vehicles for various movements at both the intersections. It was found that occupation time increases with the increasing con- flicting traffic and observed to be higher at the uncontrolled intersection compared to the semicontrolled intersec- tion. The segregated turning movements and the presence of mini roundabout at the semicontrolled intersection reduces the conflicts of vehicular movements, which ulti- mately reduces the occupation time. The proposed methodology will be useful to determine the occupation time for various movements at unsignalized intersections. The models developed in the study can be used by practitioners and traffic engineers to estimate the capacity of unsignalized intersections in non-lane-based discipline and mixed traffic conditions.

Delays caused by motorized vehicles unable to clear intersections in China: Graphical analysis

In many Chinese cities,motorized vehicles （M-vehicles） move slowly at intersections due to the interference of a large number of non-motorized vehicles （NM-vehicles）.The slow movement makes a part of M-vehicles fail to leave intersections timely after the traffic signal tums red,and thereby conflicts between vehicles from two directions occur.The phenomenon was analyzed graphically by using the cumulative vehicle curve.Delays in three cases were modeled and compared：NM-vehicle priorities and M-vehicle priorities with all-red intervals unable to release all vehicles,and longer all-red intervals ensuring release all vehicles.Marginal delays caused by two illegal behaviors that occasionally happened in mixed traffic intersections were also investigated.It is concluded that increasing the speed of M-vehicles leaving intersections and postponing the entering of NM-vehicles are the keys in mathematics,although they are uneasy in disordered mixed traffic intersections due to a dilemma between efficiency and orders in reality.The results could provide implications for the traffic management in the cities maintaining a large number of M-and NM-vehicles.

EMPIRICAL VERIFICATION OF ANISOTROPIC HYDRODYNAMIC TRAFFIC MODEL IN TRAFFIC ANALYSIS AT INTERSECTIONS IN URBAN AREA

In this article, the traffic hydrodynamic model considering the driver＇s reaction time was applied to the traffic analysis at the intersections on real roads. In the numerical simulation with the model, the pinch effect of the right-turning vehicles flow was found, which mainly leads to traffic jamming on the straight lane. All of the results in accordance with the empirical data confirm the applicability of this model.

On a Winning Cycle

Two wheels are the best way to get around BeijingPut your hand up if you hate sitting in a traffic jam-yes,me too!As I would imagine,right now,over 7billion hands would be reaching for the sky,fingers pointed toward the clouds,emphasizing just how much they hate car traffic.So what’s the solution？

Intersection signal control multi-objective optimization based on genetic algorithm

A signal control intersection increases not only vehicle delay, but also vehicle emissions and fuel consumption in that area. Because more and more fuel and air pollution problems arise recently, an intersection signal control optimization method which aims at reducing vehicle emissions, fuel consumption and vehicle delay is required heavily. This paper proposed a signal control multi-object optimization method to reduce vehicle emissions, fuel consumption and vehicle delay simultaneously at an intersection. The optimization method combined the Paramics microscopic traffic simulation software, Comprehensive Modal Emissions Model （CMEM）, and genetic algorithm. An intersection in Haizhu District, Guangzhou, was taken for a case study. The result of the case study shows the optimal timing scheme obtained from this method is better than the Webster timing scheme.