Preparation of high-quality films plays an important role to achieve high-performance nonfullerene (NF) organic solar cells. NF active layer films are typically fabricated by spin coating. Novel fabrication methods to...Preparation of high-quality films plays an important role to achieve high-performance nonfullerene (NF) organic solar cells. NF active layer films are typically fabricated by spin coating. Novel fabrication methods to process the NF active layer are desirable to be compatible with large-area production. Herein, we report on the fabrication of NF active layer films via a water transfer printing method.This method delivers a uniform film with controllable film thicknesses. NF active layers of PDBD-T:ITIC and PBDB-T-2F:IT-4F were fabricated via the method to validate its effectiveness. Solar cells with the water transfer-printed active layers show comparable performance (up to 11.7%) to the cells with spin-coated active layers. Furthermore, NF solar modules containing 4-sub cells with the active area of 3.2 cm2 are also fabricated via the method. The module shows VOC of up to 3.4 V and a power conversion efficiency of 8.1% with the PBDB-T-2F:IT-4F active layer.展开更多
In order to enhance the water repellence property of cotton fabric, cotton fabric was grafted using hexafluorobutyl methacrylate( HFMT) monomer via atom transfer radical polymerization( ATRP) method. Water repellent c...In order to enhance the water repellence property of cotton fabric, cotton fabric was grafted using hexafluorobutyl methacrylate( HFMT) monomer via atom transfer radical polymerization( ATRP) method. Water repellent cotton fabric was successfully prepared, and characterized by scanning electron microscopy( SEM),Fourier transform infrared spectroscopy( FTIR), and X-ray photoelectron spectroscopy( XPS). The SEM images of the HFMT-treated cotton displayed significant difference from the untreated one. FT-IR characterization of the HFMTtreated cotton indicated that HFMT was successfully grafted onto the surface of the cotton fabric. XPS analysis indicated that the fluorine element of the HFMT-treated cotton existing on the surface of the cotton fabric. The surface contact angle test as well as the water repellence rating test showed that the water repellence of the HFMTtreated cotton fabric was much better than that of the untreated cotton fabric. The surface contact angle of the HFMT-treated cotton fabric could reach( 132. 4 ± 2. 2) °,and the water repellence rating could achieve grade 3. The washing durability of the HFMT-treated fabric was also investigated. The surface contact angle of the HFMTtreated cotton fabric could reach( 121. 1 ± 2. 1) ° after 20 washing times. Furthermore, the whiteness, air permeability, breaking strength,and breaking elongation of the HFMT-treated cotton fabric decreased slightly compared with the untreated cotton fabric.Finally,cotton fabric with good water repellence property and excellent washing durability could be obtained with little effect on the intrinsic properties of cotton fabric.展开更多
Based on the Dynamic Dress Model which can simulate the body core temperature and skintemperature,as well as body sweating,this paper holds a further inquiry into the new method formeasuring heat resistance of fabrics...Based on the Dynamic Dress Model which can simulate the body core temperature and skintemperature,as well as body sweating,this paper holds a further inquiry into the new method formeasuring heat resistance of fabrics and moisture transmission in terms of“clo”unit andpermeability index“im”.It is found out that the values of Tex of warp and weft have the greatestinfluence on permeability index im and when the thread count increases to a certain limit,thepermeability index“im”is in direct proportion to thread count.展开更多
In this paper, the influence of processing parameters and powder binder content was studied and analysed on the properties of high loft nonwoven fabrics mainly using statistical analysis method. The relationship betwe...In this paper, the influence of processing parameters and powder binder content was studied and analysed on the properties of high loft nonwoven fabrics mainly using statistical analysis method. The relationship between the bulkiness and the warmth retention property was also tested. The analytical results reveal that the increase of the powder content, heating temperature and pressure will affect the tensile strength of nonwovens. Moreover, there are interactions between these parameters. The compression properties only change a little for a powder binder content of 15％—20％. However, with the increase of the heating temperature and pressure, the bulkiness and compression rate will reduce significantly. For the bulk density of high loft nonwoven fabrics, there exists a heat transter mechanism of air convection, but the higher the bulkiness of nonwovens, the larger the thickness and the better the warmth retention property of nonwoven fabrics.展开更多
The aim of this paper is to investigate water transmissionproperties of two-layer weft knitted fabrics and somerelated factors.The author prepared some experimentalfabrics with specific yarns and stitch densities,and ...The aim of this paper is to investigate water transmissionproperties of two-layer weft knitted fabrics and somerelated factors.The author prepared some experimentalfabrics with specific yarns and stitch densities,and mea-sured water vapor permeating rate through the fabricsand liquid water transferability from inner to outerlayer.Results show that the permeating rate is closelyrelated to porosity within fabric while the transferabilitydepends mainly upon the water absorbabilities of fiberson two layers and the degree or their difference.展开更多
基金supported by the National Natural Science Foundation of China (Grant nos. 21474035, 51773072)the HUST Innovation Research Fund (Grant nos. 2016JCTD111, 2017KFKJXX012)+1 种基金the Science and Technology Program of Hubei Province (2017AHB040)China Postdoctoral Science Foundation funded project (2016M602289)
文摘Preparation of high-quality films plays an important role to achieve high-performance nonfullerene (NF) organic solar cells. NF active layer films are typically fabricated by spin coating. Novel fabrication methods to process the NF active layer are desirable to be compatible with large-area production. Herein, we report on the fabrication of NF active layer films via a water transfer printing method.This method delivers a uniform film with controllable film thicknesses. NF active layers of PDBD-T:ITIC and PBDB-T-2F:IT-4F were fabricated via the method to validate its effectiveness. Solar cells with the water transfer-printed active layers show comparable performance (up to 11.7%) to the cells with spin-coated active layers. Furthermore, NF solar modules containing 4-sub cells with the active area of 3.2 cm2 are also fabricated via the method. The module shows VOC of up to 3.4 V and a power conversion efficiency of 8.1% with the PBDB-T-2F:IT-4F active layer.
基金National Natural Science Foundations of China(Nos.51203107,51273134,and 51273140)Jiangsu Province Project of Postgraduate Innovation Engineering,China(No.CXZZ13_0818)+1 种基金Qing Lan Project,Jiangsu,ChinaPriority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘In order to enhance the water repellence property of cotton fabric, cotton fabric was grafted using hexafluorobutyl methacrylate( HFMT) monomer via atom transfer radical polymerization( ATRP) method. Water repellent cotton fabric was successfully prepared, and characterized by scanning electron microscopy( SEM),Fourier transform infrared spectroscopy( FTIR), and X-ray photoelectron spectroscopy( XPS). The SEM images of the HFMT-treated cotton displayed significant difference from the untreated one. FT-IR characterization of the HFMTtreated cotton indicated that HFMT was successfully grafted onto the surface of the cotton fabric. XPS analysis indicated that the fluorine element of the HFMT-treated cotton existing on the surface of the cotton fabric. The surface contact angle test as well as the water repellence rating test showed that the water repellence of the HFMTtreated cotton fabric was much better than that of the untreated cotton fabric. The surface contact angle of the HFMT-treated cotton fabric could reach( 132. 4 ± 2. 2) °,and the water repellence rating could achieve grade 3. The washing durability of the HFMT-treated fabric was also investigated. The surface contact angle of the HFMTtreated cotton fabric could reach( 121. 1 ± 2. 1) ° after 20 washing times. Furthermore, the whiteness, air permeability, breaking strength,and breaking elongation of the HFMT-treated cotton fabric decreased slightly compared with the untreated cotton fabric.Finally,cotton fabric with good water repellence property and excellent washing durability could be obtained with little effect on the intrinsic properties of cotton fabric.
文摘Based on the Dynamic Dress Model which can simulate the body core temperature and skintemperature,as well as body sweating,this paper holds a further inquiry into the new method formeasuring heat resistance of fabrics and moisture transmission in terms of“clo”unit andpermeability index“im”.It is found out that the values of Tex of warp and weft have the greatestinfluence on permeability index im and when the thread count increases to a certain limit,thepermeability index“im”is in direct proportion to thread count.
文摘In this paper, the influence of processing parameters and powder binder content was studied and analysed on the properties of high loft nonwoven fabrics mainly using statistical analysis method. The relationship between the bulkiness and the warmth retention property was also tested. The analytical results reveal that the increase of the powder content, heating temperature and pressure will affect the tensile strength of nonwovens. Moreover, there are interactions between these parameters. The compression properties only change a little for a powder binder content of 15％—20％. However, with the increase of the heating temperature and pressure, the bulkiness and compression rate will reduce significantly. For the bulk density of high loft nonwoven fabrics, there exists a heat transter mechanism of air convection, but the higher the bulkiness of nonwovens, the larger the thickness and the better the warmth retention property of nonwoven fabrics.
文摘The aim of this paper is to investigate water transmissionproperties of two-layer weft knitted fabrics and somerelated factors.The author prepared some experimentalfabrics with specific yarns and stitch densities,and mea-sured water vapor permeating rate through the fabricsand liquid water transferability from inner to outerlayer.Results show that the permeating rate is closelyrelated to porosity within fabric while the transferabilitydepends mainly upon the water absorbabilities of fiberson two layers and the degree or their difference.
