Thermal Analysis of Organic Light Emitting Diodes Based on Basic Heat Transfer Theory

We investigate the thermal characteristics of standard organic light-emitting diodes （OLEDs） using a simple and clear 1D thermal model based on the basic heat transfer theory. The thermal model can accurately estimate the device temperature, which is linearly with electrical input power. The simulation results show that there is almost no temperature gradient within the OLED device working under steady state conditions. Furthermore, thermal analysis simulation results show that the surface properties （convective heat transfer coetficient and surface emissivity） of the substrate or cathode can significantly affect the temperature distribution of the OLED.

Charge transfer between biogenic jarosite derived Fe^3＋ and TiO2 enhances visible light photocatalytic activity of TiO2

In this work, we have shown that mining waste derived Fe^3＋can be used to enhance the photocatalytic activity of TiO2. This will allow us to harness a waste product from the mines, and utilize it to enhance TiO2 photocatalytic waste water treatment efficiency. An organic linker mediated route was utilized to create a composite of TiO2 and biogenic jarosite. Evidence of Fe／O／Ti bonding in the TiO2/jarosite composite was apparent from the FTIR, EFTEM, EELS and ELNEFS analysis. The as prepared material showed enhanced photocatalytic activity compared to pristine TiO2, biogenic jarosite and mechanically mixed sample of jarosite and TiO2 under both simulated and natural solar irradiation. The prepared material can reduce the electrical energy consumption by 4 times compared to pristine P25 for degradation of organic pollutant in water. The material also showed good recyclability. Results obtained from sedimentation experiments showed that the larger sized jarosite material provided the surface to TiO2 nanoparticles, which increases the settling rate of the materials. This allowed simple and efficient recovery of the catalyst from the reaction system after completion of photocatalysis. Enhanced photocatalytic activity of the composite material was due to effective charge transfer between TiO2 and jarosite derived Fe^3＋as was shown from the EELS and ELNEFS. Generation of OHU was supported by photoluminesence（PL） experiments.

Remediation effect of compost on soluble mercury transfer in a crop of Phaseolus vulgaris

We studied the dynamics of mercury（Hg） transfer in Phaseolus vulgaris plants grown in soil with Hg-doped compost at the maximum levels permitted by Colombian law on organic amendments. Quantitative evaluation of transfer was made in different plant organs： roots,stem, leaves, pods and seeds. Matrix effect was determined in doped soil assays, using soil with and without addition of compost. Results showed that the use of organic matter reduced Hg transfer to the plant and the amount transferred was differentially distributed to the organs. We observed an inverse relationship between concentration and distance from the body to the root. It was evident that transfer was mediated by quantitative factors;the greater the presence of mercury in soil, the larger the amount that will be transferred.Results also indicate the remedial effect of compost and the presence of a barrier, at the root level, against mercury translocation to the plant aerial parts.

Improving Performance of Inoculating Alloy Wires by Coating a Boron Nitride Layer

The paper reports the deposition（by magnetron sputtering） and properties of polycrystalline boron nitride （BN） layers on commercial inoculating alloy wires. As is characterized by means of Fourier transform infrared（FTIR） spectroscopy, electron energy dispersive X-ray（EDX） spectroscopy and scanning electron microscopy（SEM）, the thin BN layers consist of hexagonal and orthorhombic BN phases and are smooth without cracks. Organism transfer- ring-circles experiments reveal that the adhesion between the BN layer and alloy wire is very good after tens of cycles. It is demonstrated that the BN layers covered wires are biomaterial lubricious and self-cleaning. As a result, BN layer would effectively enhance the function and efficiency of inoculating alloy wires, which could be widely ap- plied to bio-experimentation and biomedicine apparatuses.