Resting-state brain network remodeling after different nerve reconstruction surgeries:a functional magnetic resonance imaging study in brachial plexus injury rats

Distinct brain remodeling has been found after different nerve reconstruction strategies,including motor representation of the affected limb.However,differences among reconstruction strategies at the brain network level have not been elucidated.This study aimed to explore intranetwork changes related to altered peripheral neural pathways after different nerve reconstruction surgeries,including nerve repair,endto-end nerve transfer,and end-to-side nerve transfer.Sprague–Dawley rats underwent complete left brachial plexus transection and were divided into four equal groups of eight:no nerve repair,grafted nerve repair,phrenic nerve end-to-end transfer,and end-to-side transfer with a graft sutured to the anterior upper trunk.Resting-state brain functional magnetic resonance imaging was obtained 7 months after surgery.The independent component analysis algorithm was utilized to identify group-level network components of interest and extract resting-state functional connectivity values of each voxel within the component.Alterations in intra-network resting-state functional connectivity were compared among the groups.Target muscle reinnervation was assessed by behavioral observation(elbow flexion)and electromyography.The results showed that alterations in the sensorimotor and interoception networks were mostly related to changes in the peripheral neural pathway.Nerve repair was related to enhanced connectivity within the sensorimotor network,while end-to-side nerve transfer might be more beneficial for restoring control over the affected limb by the original motor representation.The thalamic-cortical pathway was enhanced within the interoception network after nerve repair and end-to-end nerve transfer.Brain areas related to cognition and emotion were enhanced after end-to-side nerve transfer.Our study revealed important brain networks related to different nerve reconstructions.These networks may be potential targets for enhancing motor recovery.

Three-Stage Transfer Learning with AlexNet50 for MRI Image Multi-Class Classification with Optimal Learning Rate

In radiology,magnetic resonance imaging(MRI)is an essential diagnostic tool that provides detailed images of a patient’s anatomical and physiological structures.MRI is particularly effective for detecting soft tissue anomalies.Traditionally,radiologists manually interpret these images,which can be labor-intensive and time-consuming due to the vast amount of data.To address this challenge,machine learning,and deep learning approaches can be utilized to improve the accuracy and efficiency of anomaly detection in MRI scans.This manuscript presents the use of the Deep AlexNet50 model for MRI classification with discriminative learning methods.There are three stages for learning;in the first stage,the whole dataset is used to learn the features.In the second stage,some layers of AlexNet50 are frozen with an augmented dataset,and in the third stage,AlexNet50 with an augmented dataset with the augmented dataset.This method used three publicly available MRI classification datasets:Harvard whole brain atlas(HWBA-dataset),the School of Biomedical Engineering of Southern Medical University(SMU-dataset),and The National Institute of Neuroscience and Hospitals brain MRI dataset(NINS-dataset)for analysis.Various hyperparameter optimizers like Adam,stochastic gradient descent(SGD),Root mean square propagation(RMS prop),Adamax,and AdamW have been used to compare the performance of the learning process.HWBA-dataset registers maximum classification performance.We evaluated the performance of the proposed classification model using several quantitative metrics,achieving an average accuracy of 98%.

Transfer RNA-derived small RNA serves as potential non-invasive diagnostic marker and a novel therapeutic target for acute pancreatitis

Transfer RNA(tRNA)-derived fragments,a new type of tRNA-derived small RNA(tsRNA),can be cleaved from tRNA by enzymes to regulate target gene expression at the transcriptional and translational levels.tsRNAs are not only degradation fragments but also have biological functions,including those in immune inflammation,metabolic disorders,and cell death.tsRNA dysregulation is closely associated with multiple diseases,including various cancers and acute pancreatitis(AP).AP is a common gastrointestinal disease,and its incidence increases annually.AP development is associated with tsRNAs,which regulate cell injury and induce inflammation,especially pyroptosis and ferroptosis.Notably,serum tRF36 has the potential to serve as a non-invasive diagnostic biomarker and leads to pancreatic acinar cell ferroptosis causing inflammation to promote AP.We show the characteristics of tsRNAs and their diagnostic value and function in AP,and discuss the potential opportunities and challenges of using tsRNAs in clinical applications and research.

Brachioradialis tendon transfer and palmaris longus tendon graft for thumb avulsion:A case report and review of literature

BACKGROUND Thumb replantation following complete traumatic avulsion requires complex techniques to restore function,especially in cases of avulsion at the level of the metacarpophalangeal joint(MCP I)and avulsion of the flexor pollicis longus(FPL)at the musculotendinous junction.Possible treatments include direct tendon suture or tendon transfer,most commonly from the ring finger.To optimize function and avoid donor finger complications,we performed thumb replantation with flexion restoration using brachioradialis(BR)tendon transfer with palmaris longus(PL)tendon graft.CASE SUMMARY A 20-year-old left-handed male was admitted for a complete traumatic left thumb amputation following an accident while sliding from the top of a handrail.The patient presented with skin and bone avulsion at the MCP I,avulsion of the FPL tendon at the musculotendinous junction(zone 5),avulsion of the extensor pollicis longus tendon(zone T3),and avulsion of the thumb’s collateral arteries and nerves.The patient was treated with two stage thumb repair.The first intervention consisted of thumb replantation with MCP I arthrodesis,resection of avulsed FPL tendon and implantation of a silicone tendon prosthesis.The second intervention consisted of PL tendon graft and BR tendon transfer.Follow-up at 10 months showed good outcomes with active interphalangeal flexion of 70°,grip strength of 45 kg,key pinch strength of 15 kg and two-point discrimination threshold of 4 mm.CONCLUSION Flexion restoration after complete thumb amputation with FPL avulsion at the musculotendinous junction can be achieved using BR tendon transfer with PL tendon graft.

英汉修辞格移就Transferred Epithet及翻译

对各种修辞格的研究是整个修辞学领域中的重要组成部分,英语修辞格转移描述词Transferred Epithet和汉语修辞格移就基本相同。Transferred Epithet格式是将本应用来描述甲事物性质状态的定语移来描述乙事物。英语修辞格Transferred Epithet可使人联想、引人入胜。本文拟依据修辞格定义,探析英汉移就transferred Epithet的实例及翻译,以期了解英汉修辞格的应用和翻译特点。

浅论Transferred Epithet与Hypallage

在英语语言学界,存在着忽视Transferred Ep ithet和Hypallage的真实内涵,把二者混淆为同种修辞格即“移就”的现象。通过对Transferred Ep ithet和Hypallage的生成原因、表现形式、功能等三方面的分析和介绍,对二者进行了界定,以期引起对此问题的关注及研究。

也论Transferred Epithet的理解与翻译

在论述Transferred epithet的语义特征、逻辑关系、修辞功能、类型和结构的基础上,从心理因素的角度来分析其与隐喻的差别,进而探讨如何正确地对其理解和通顺地进行翻译的方法问题。

Transferred Epithet的表现形式及其修辞功能

英语的“移就”是一种特殊的语言现象,也是一种常见的修辞格。“移就”的表现形式多样,其修辞功能也十分丰富,表现为言简意赅、借物抒情、生动新颖等。

Parameter optimization for tungsten carbide/Ni-based composite coating deposited by plasma transferred arc hardfacing

Ni-based composite coatings with a high content of tungsten carbides(Stelcar65composite coatings)were synthesized by plasma transferred arc(PTA)hardfacing.The welding parameters of Stelcar65composite coatings were optimized by orthogonal tests.The PTA welding parameters including welding current,powder feed rate and welding speed have significant influence on the tungsten carbide degradation.The values for the optimum welding current,powder feed rate and welding speed were determined to be100A,25g/min and40mm/min,respectively.The produced WC/Ni-based composite coatings were crack-and degradation-free.The microstructure of deposited layers,as well as the microstructure and microhardness of the optimal coating were further analyzed.

A study of fire propagation in coal seam with numerical simulation of heat transfer and chemical reaction rate in mining field

Spontaneous combustion of coal is a problem that affects the mining operation and generates environ-mental,economic,social and geotechnical impacts.This phenomenon has been divided into two pro-cesses:ignition and propagation.Fire propagation develops in coal seams because of a set of factors such as direction and wind speed,fracturing and temperature.In this work,heat transfer and chemical kinetics are studied from conservation equations of energy and species,respectively,using the software COMSOL Multiphysics to simulate the propagation of fires in coal seams.Two possible scenarios were analyzed that usually occur in the walls of the coal seams,such as fire focus and fire complete screens.It was found that the propagation kinetics of the fire changes depending on the temperature,the fractur-ing of rock mass and the area of fire influence.For temperature values lower than 300℃,there is con-sumption around 250 cm^3/h,values around 700℃,the consumption is 1500 cm^3/h,and for fires of 1200℃ have values of 3000 cm^3/h.Depending on the speed of propagation can vary from 4 to 17cm/day,considering on the level and fracturing of the final wall of the open pit.

Effects of Y_2O_3 on the microstructure and wear resistance of cobalt-based alloy coatings deposited by plasma transferred arc process

Cobalt-based alloys with different Y2O3 contents were deposited on Q235A-carbon steel using plasma transferred arc （PTA） welding machine. The effect of Y2O3 on the microstructure and wear resistance properties of the cobait-based alloys were investigated using an optical microscope, a scanning electron microscope （SEM）, X-ray diffraction （XRD）, and transmission electron microscopy （TEM）. It was found that a cobalt-based solid solution with a face-centered cubic crystal structure was presented accompanied by the secondary phase M7C3 with a hexagonal crystal structure in the Y2O3-free cobalt-based alloy coating. Several stacking faults exist in the cobalt-based solid solution. The addition of Y2O3 leads to the existence of the Y2O3 phase in the Y2O3-modified coatings. Though stacking fault exists in the Y2O3-modified coatings, its density increases. The addition of Y2O3 can refine the microstructure and can increase the wear resistance properties when its contents are less than or equal to 0.8 wt.%. However, further increase of its contents will lead to the agglomeration of undissolved Y2O3 particles at the γ-Co grain boundary, and will lead to a coarse microstructure and lower wear resistance properties.

Impact of transferred water on the hydrochemistry and water quality of surface water and groundwater in Baiyangdian Lake,North China

The hydrochemical composition of surface water and groundwater is a key parameter for understanding the evolution of water and its quality.In particular,little is known about the impact of transferred water on surface water and groundwater.In this study,Baiyangdian Lake was selected as a typical area for extensive groundwater exploration and surface water transfer in the North China Plain.Surface water and groundwater samples were sampled in dry/wet seasons and then analyzed before/after the water transfer,respectively.Generally,surface water and groundwater are extensively hydrologically connected based on hydrochemical evidence.It was found that the hydrochemical composition of the shallow groundwater is affected by the surface water and that the water quality of the deep groundwater is stable.However,inter-aquifer recharge processes from the shallow groundwater to the deep groundwater existed in the anthropogenic region impacted with high nitrate-ion concentrations.Also,the hydrochemical composition of the surface water and groundwater was dominated by rock-weathering and evaporation-precipitation processes.Due to the existence of the deep vadose zone in the alluvial fan,Na^(+)was exchanged into soil matrices during the leakage of the surface water.In addition,the transferred water resulted in surface water with good quality,and it also played as an important recharge source to groundwater.As the most important water resource for irrigation and drinking,deep groundwater should be paid more attention in the alluvial fan with frequent water transfer and extensive groundwater exploration.

Phenotypic and Behavioral Defects Induced by Iron Exposure Can Be Transferred to Progeny in Caenorhabditis elegans

Objective Previous work has showed that excess iron accumulation is harrnftd to reproduction and even promotes death; however, whether the multiple biological toxicity of iron （Fe） exposure could be transferred to progeny remains unknown. The present study used Caenorhabditis elegans to analyze the multiple toxicities of iron exposure and their possible transferable properties. Methods Three concentrations of iron sulfate solution （2.5μmol/L, 75μmol/L, and 200 μmol/L） were used. The endpoints of lifespan, body size, generation time, brood size, head thrash and body bend frequencies, and chemotaxis plasticity were selected to investigate Fe toxicity and its effect on progeny in Caenorhabditis elegans. Results The Fe toxicity could cause multiple biological defects in a dose-dependent manner by affecting different endpoints in nematodes. Most of the multiple biological defects and behavior toxicities could be transferred from Fe-exposed Caenorhabditis elegans to their progeny. Compared to the parents, no recovery phenotypes were observed for some of the defects in the progeny, such as body bend frequency and life span. We further summarized the defects caused by Fe exposure into 2 groups according to their transferable properties. Conclusion Our results suggest that Fe exposure could cause multiple biological defects, and most of these severe defects could be transferred from Fe exposed nematodes to their progeny.

Assessing adequacy of emergency provider documentation among interhospital transferred patients with acute aortic dissection

BACKGROUND: Acute aortic dissection(AoD) is a hypertensive emergency often requiring the transfer of patients to higher care hospitals; thus, clinical care documentation and compliance with the Emergency Medical Treatment and Active Labor Act(EMTALA) is crucial. The study assessed emergency providers(EP) documentation of clinical care and EMTALA compliance among interhospital transferred AoD patients.METHODS: This retrospective study examined adult patients transferred directly from a referring emergency department(ED) to a quaternary academic center between January 1, 2011 and September 30, 2015. The primary outcome was the percentage of records with adequate documentation of clinical care(ADoCC). The secondary outcome was the percentage of records with adequate documentation of EMTALA compliance(ADoEMTALA). RESULTS: There were 563 electronically identified patients with 287 included in the final analysis. One hundred and five(36.6%) patients had ADoCC while 166(57.8%) patients had ADoEMTALA. Patients with inadequate documentation of EMTALA(IDoEMTALA) were associated with a higher likelihood of not meeting the American Heart Association(AHA) ED Departure SBP guideline(OR 1.8, 95% CI 1.03–3.2, P=0.04). Male gender, handwritten type of documentation, and transport by air were associated with an increased risk of inadequate documentation of clinical care(IDoCC), while receiving continuous infusion was associated with higher risk of IDoEMTALA.CONCLUSION: Documentation of clinical care and EMTALA compliance by Emergency Providers is poor. Inadequate EMTALA documentation was associated with a higher likelihood of patients not meeting the AHA ED Departure SBP guideline. Therefore, Emergency Providers should thoroughly document clinical care and EMTALA compliance among this critically ill group before transfer.

Toxicity and horizontal transfer of bifenthrin and dimefluthrin against the red imported fire ant, Solenopsis invicta Buren(Hymenoptera: Formicidae), and the efficacy of their dust applications in the field

The red imported fire ant,Solenopsis invicta Buren,poses a significant threat to biodiversity,agriculture,and public health in its introduced ranges.While chemicals such as toxic baits and dust are the main methods for S.invicta control,toxic baits are slow,requiring approximately one or two weeks,but dust can eliminate the colony of fire ants rapidly in just three to five days.To explore more active ingredients for fire ant control using dusts,the toxicity of bifenthrin and dimefluthrin,the horizontal transfer of bifenthrin and dimefluthrin dust and their efficacy in the field were tested.The results showed that the LD50(lethal dose) values of bifenthrin and dimefluthrin were 3.40 and 1.57 ng/ant,respectively.The KT50(median knockdown time) and KT95(95%knockdown time) values of a 20μg mL^(–1)bifenthrin dose were 7.179and 16.611 min,respectively.The KT50and KT95of a 5μg mL^(–1)dimefluthrin dose were 1.538 and 2.825 min,respectively.The horizontal transfers of bifenthrin and dimefluthrin among workers were effective.The mortality of recipients (secondary mortality) and secondary recipients (tertiary mortality) were both over 80%at 48 h after 0.25,0.50 and 1.00%bifenthrin dust treatments.The secondary mortality of recipients was over 99%at 48 h after 0.25,0.50 and 1.00% dimefluthrin dust treatments,but the tertiary mortality was below 20%.The field trial results showed that both bifenthrin and dimefluthrin exhibited excellent fire ant control effects,and the comprehensive control effects of 1.00%bifenthrin and dimefluthrin dusts at 14 d post-treatment were 95.87 and 85.70%,respectively.

The Model of Thermal Response of Liquefied Petroleum Gas Tanks Partially Exposed to Jet Fire

This paper describes a mathematical model developed to study the behavior of liquefied petroleum gas (LPG) tanks when subjected to jet fire. The model consists of a number of field and zone sub-models which are used to simulate the various physical phenomena taking place during the tank engulfment period. The model can be used to predict the pressure and temperature of the LPG in the tank, the temperature of the wall of tank, and the time of tank explosion. The comparisons between the model predicted results and the test data show good agreement. The results show that the jet fire partially impinging on tank wall led to higher wall temperature and the time to failure was shorter than that in engulfing pool fire. And the exposure of the upper wall in the vapor zone to the fire is more dangerous than that of the LPG contacted wall.

An important property of entanglement： pairwise entanglement that can only be transferred by an entangled pair

Based on the calculation of all the pairwise entanglements in the n （n ≤ 6）-qubit Heisenberg XX open chain with system impurity, we find an important result： pairwise entanglement can only be transferred by an entangled pair. The non-nearest pairwise entanglements will have the possibility to exist as long as there has been even number of qubits in their middle. This point indicates that we can obtain longer distance entanglement in a solid system.

Wear Properties of Plasma Transferred Arc Fe-based Coatings Reinforced by Spherical WC Particles

Fe-based coatings reinforced by spherical WC particles were produced on the 304 stainless steel by plasma transferred arc(PTA) to enhance the surface wear properties. Three different Fe/WC composite powder mixtures containing 0 wt%, 30 wt%, and 60 wt% of WC were investigated. The microstructure and phase composition of the Fe/WC composite PTA coatings were evaluated systemically by using scanning electron microscope(SEM) and X-ray diffraction(XRD). The wear properties of the three fabricated PTA coatings were investigated on a BRUKER UMT TriboLab. The morphologies of the worn tracks and wear debris were characterized by using SEM and 3 D non-contract profiler. The experimental results reveal that the microhardness on the cross-section and the wear resistance of the fabricated coatings increase dramatically with the increasing adding WC contents. The coating containing 60 wt% of WC possesses excellent wear resistance validated by the lower coefficients of friction(COF), narrower and shallower wear tracks and smaller wear rate. In the pure Fe-based coating, the main wear mechanism is the combination of adhesion and oxidative wear. Adhesive and two-body abrasive wear are predominated in the coating containing 30 wt% of WC, whereas threebody abrasion wear mechanism is predominated in the coating containing 60 wt% of WC.

Effect of contact thermal resistance on temperature distributions of concrete-filled steel tubes in fire

To predicate the temperature distribution of concrete-filled steel tubes(CFSTs) being exposure to fire,a finite element analysis model was developed using a finite element package,ANSYS.A suggested value of contact thermal resistance was therefore proposed with the supporting of massive numbers of collected test data.Parametric analysis was conducted subsequently towards the cross-sectional temperature distribution of CFST columns in four-side fire,in which the exposure time,width of the cross section,steel ratio were taken into account with considering contact thermal resistance.It was found that contact thermal resistance has little effect on the overall temperature regulation with the exposure time,the width of cross-section or the change of steel ratio.However,great temperature dropping at the concrete adjacent to the contact interface,and gentle temperature increase at steel tube,exist if considering contact thermal resistance.The results of the study are expected to provide theoretical basis for the fire resistance behavior and design of the CFST columns being exposure to fire.