A new perspective on ecological vulnerability and its transformation mechanisms

Ecological vulnerability refers to the degree of ecosystem disturbance,system damage,and the ability of system restoration.Although case-specific evaluations of ecological vulnerability are progressing rapidly,they have been carried out mainly in areas with intensive human activities or in harsh natural environments.Using the Web of ScienceTM core collection,this review paper summarized studies on ecological vulnerability published from 2000 to 2022 and analyzed in depth major case studies.It was found that traditional ecological vulnerability research has been addressed largely in terms of assessment models,data processing models,and analysis of influencing factors,however there was a lack of research on the process of vulnerability transformation.Because the vulnerability transformation in a hierarchical vulnerability index system is regulated by multiple factors in a heterogeneous region,it is urgent to understand how the ecological vulnerability in a region evolves from one level to another over time.Therefore this paper put forward the new perspective of research,i.e.,applying quantitative analysis to identification of regulating factors and exploring the mechanisms of ecological vulnerability transformation.This new perspective could assist in monitoring the complex spatiotemporal changes in ecological vulnerability and taking necessary measures to prevent from decline of ecological stability.

Research Status of Water Quality Criteria and Standards and Analysis on the Transformation Methods

Under the vision of development for the new era,China has entered a stage of high-quality economic development and an important window period in which we have the conditions and ability to address the prominent issue of economic development and ecological protection in a coordinated way.However,all kinds of environmental benchmark values in China are lacking and need to be constantly supplemented and improved.Therefore,exploring and putting forward a simple and efficient method for the transformation of environmental criteria into environmental standards is an important basis for the rapid establishment of relevant environmental criteria system and the effective promotion of the development of environmental standards system towards a scientific and reasonable direction.In this paper,the water environment is taken as the research object.By analyzing the research progress of environmental criteria and standards at home and abroad,and the foreign method of transforming environmental criteria into environmental standards,combined with the problems faced in the process of transforming environmental criteria into environmental standards in China,an effective method to transform China's environmental criteria into environmental standards is analyzed.After analysis and comparison,it is found that the pollution reduction accounting method could achieve their simple and efficient conversion.Under the premise of obtaining environmental criteria for certain pollutants,environmental criteria for certain pollutants could be obtained by distributing pollutants reduction costs,and accounting economic benefits after reaching standard,thus obtaining the environmental standard of this type of pollutant,which provides reference to determine the environmental standard limits of such pollutants.

Convolution Theorem of Fractional Fourier Transformation Derived by Representation Transformation in Quantum Mechancis

Based on our previous paper (Commun.Theor.Phys.39 (2003) 417) we derive the convolution theoremof fractional Fourier transformation in the context of quantum mechanics,which seems a convenient and neat way.Generalization of this method to the complex fractional Fourier transformation case is also possible.

Mechanism and Kinetics of Phase Transformation in Two-phase TiAl-based Alloys

The aged and quenched microstructures of both alloys, Ti-42at-%Al and Ti-45at -%Al,homogenized in the disordered single phase field. were investigated And the results show that the quinched microstructure is a supersaturated single phase of ordered 22. When the supersaturated phase is aged in the two phase range at 1273 and 1373 K, it will transform to a lamellar microstructure of γ+α2. with a discontinuous decomposition mechanism in Ti-42at-%Al alloy and a semicontinuous decomposition mechanism in T1-45at-%Al alloy. With the methods of quantitative metallograph examination and X-ray diffraction analysis. the relationship between the amount of γ, phase precipitation and the time of isothermal transformation is agreed

Bionic Attitude Transformation Combined with Closed Motion for a Free Floating Space Robot

In order to realize the small error attitude transformation of a free floating space robot,a new method of three degrees of freedom（ DOF） attitude transformation was proposed for the space robot using a bionic joint. A general kinematic model of the space robot was established based on the law of linear and angular momentum conservation. A combinational joint model was established combined with bionic joint and closed motion. The attitude transformation of planar,two DOF and three DOF is analyzed and simulated by the model,and it is verified that the feasibility of attitude transformation in three DOF space. Finally,the specific scheme of disturbance elimination in attitude transformation is presented and simulation results are obtained.Therefore,the range of application field of the bionic joint model has been expanded.

Transformation Mechanism of RE Slag Contaiuing Fluoride

Transformation Mechamism of RE slag containing fluoride was analyzed by using Flood’s Model.The ef-fects of slag basicity, TiO_2 content, CaF_2 content and atom ratio of O/Si+Ti+2Al on transformation of slagcontaining fluoride were also discussed.

Transformation Process and Mechanism of Lithium Borates

Amounts of lithium-containing salt lake brine resources are widely distributed in the four provinces named Qinghai,Tibet,Inner Mongolia and Xinjiang province,especially the salt lakes in Qinghai-Tibet Plateau are abundant of

APPLICATION OF ONE-PARAMETER GROUPS OF TRANSFORMATION IN MECHANICS

In this paper,including some partial differential equations with a number of independent variables, which can he reduced by the infinitesimal form of the group, we obtain the theory of similarity transformation and its application of the second order nonlinear partial differential equations which have two independent variables and two dependent variables in mechanics.

About Nonlinear Mechanism of Energy Transformation at Ion Implantation

The peculiarities of energy dissipation transferred by solitary waves on defects such as freesurface, grain boundary, region with high concentration of vacancies are studied. One of theways of description of the long range effect taking place at ion implantation in metallic materialsis suggested.

A preliminary analysis of physical mechanism of transformation process from a landed typhoon into an extratropical cyclone

A diagnostic study is performed in the paper on the process of typhoon Norris (1980) transforming into an ex-tratropical cyclone after its landing over Southeast China. The main findings are as follows:The changes of kinetic energy are mainly attributed to the generation due to non-divergent wind. During the early stage of the typhoon landing, there exits only a small quantity of kinetic energy exchanging with the environment. And after it is transformed into an extratropical cyclone, a large amount of kinetic energy is exported from the system toward the environment.The horizontal and vertical flux-divergence terms of eddy available potenlial energy are the prominent sinks in the budgets of eddy kinetic energy. The generations of eddy kinetic energy due to both the barotropic and baroclinic processes are source terms. The former is remarkable during the initial stage. But after the depression is transformed into an extratropical cyclone, the roles of the generation by the barotropic and baroclinic processes are reversed, 1. e. , the latter has become more significant than the former.Diabatic heating is the most dominant heat source. The terms of vertical heat flux by cumulus and large-scale motion are the major sinks. And the latter is prominent after the system is transformed into an extratropical cycfone.

Speeding Up the Transformation of the Operational Mechanism And Further Developing the International Market

According to customs statistics, China’s exports of machinery and electric products in 1996 were worth US$ 48.21 billion, an increase of 9.9 percent over the preceding year, and 8.4 percent higher than the growth rate of the nation’s total exports. The proportion of machinery and electric product exports in the nation’s total foreign trade volume\ increased from 29.5 percent in 1995 to 31.9 percent in 1996, a growth at 2.4 percent.

Mechanical performance of 22SiMn2TiB steel welded with lowtransformation- temperature filler wire and stainless steel filler wire

TX-80 low-transformation-temperature(LTT)welding wire was used to replace the traditional ER 307Si welding wire to realize the connection of 22SiMn2TiB armor steel in manual overlay welding.The previously existing issues,such as welding cracks,large welding deformation,and severe welding residual stress,were solved to ensure good strength and ductility requirements.In particular,with the same welding conditions,TX-80 LTT wire eliminates welding cracks.It reduces the welding deformation no matter the base pretreatment of pre-setting angle or no pre-setting angle.By comparison,it was found that the microstructure at the TX-80 weld is mainly composed of martensite and a small amount of retained austenite.In contrast,the microstructure of the ER 307Si weld consists of a large amount of austenite and a small amount of skeleton-like ferrite.The variation trend of residual stress and microhardness from the weld to the base were investigated and compared with the mechanical properties of base materials.The TX-80 and the ER 307Si tensile samples elongation is 6.76%and 6.01%,while the ultimate tensile strengths are 877 and 667 MPa,respectively.The average impact toughness at room temperature of the ER 307Si weld is 143.9 J/cm^(2),much higher than that of the TX-80 weld,which is only 36.7 J/cm^(2).The relationship between impact and tensile properties with microstructure species and distribution was established.In addition,the fracture surface of the tensile and the impact samples was observed and analyzed.Deeper dimples,fewer pores,larger radiation zone,and shear lips of TX-80 samples indicate better tensile ductility and worse impact toughness than those of ER 307Si weld.

Reduction mechanism of high-chromium vanadium–titanium magnetite pellets by H_2–CO–CO_2 gas mixtures

The reduction of high-chromium vanadium–titanium magnetite as a typical titanomagnetite containing 0.95wt% V2O5 and 0.61wt% Cr2O3 by H2–CO–CO2 gas mixtures was investigated from 1223 to 1373 K. Both the reduction degree and reduction rate increase with increasing temperature and increasing hydrogen content. At a temperature of 1373 K, an H2/CO ratio of 5/2 by volume, and a reduction time of 40 min, the degree of reduction reaches 95%. The phase transformation during reduction is hypothesized to proceed as follows： Fe2O3 → Fe3O4 → FeO → Fe; Fe9 TiO 15 ＋ Fe2Ti3O9 → Fe2.75Ti0.25O4 → FeT iO 3 → TiO 2;（Cr0.15V0.85）2O3 → Fe2VO4; and Cr1.3Fe0.7O3 → FeC r2O4. The reduction is controlled by the mixed internal diffusion and interfacial reaction at the initial stage; however, the interfacial reaction is dominant. As the reduction proceeds, the internal diffusion becomes the controlling step.

Crystallization behavior of zeolite beta from acid-leached metakaolin

Well-crystallized zeolite beta was synthesized by using acid-leached metakaolin as the silica-alumina source and tetraethylammonium hydroxide structure-directing agent.The influence of the composition of the reaction mixture on product crystallinity was investigated,and the crystallization process was studied by examining solid samples obtained at different synthesis times.Results showed that the acid-leached metakaolin was fully converted into soluble aluminum and silicon species,which is crucial for the formation of well-crystallized zeolite beta.At the beginning of the crystallization process,these soluble aluminum and silicon species formed a aluminum-rich intermediate structure with layer morphology.With the crystallization proceeding,more silicon species were incorporated into the zeolite beta framework and the layered structure was changed into spherical particles of zeolite beta with high SiO 2 /Al 2 O 3 ratio and crystallinity.

Reaction condition optimization and kinetic investigation of roasting zinc oxide ore using (NH_4)_2SO_4

An orthogonal test was used to optimize the reaction conditions of roasting zinc oxide ore using（NH_4）_2SO_4. The optimized reaction conditions are defined as an（NH_4）_2SO_4/zinc molar ratio of 1.4：1, a roasting temperature of 440°C, and a thermostatic time of 60 min. The molar ratio of（NH_4）_2SO_4/zinc is the most predominant factor and the roasting temperature is the second significant factor that governs the zinc extraction. Thermogravimetric-differential thermal analysis was used for（NH_4）_2SO_4 and zinc mixed in a molar ratio of 1.4：1 at the heating rates of 5, 10, 15, and 20 K·min-1. Two strong endothermic peaks indicate that the complex chemical reactions occur at approximately 290°C and 400°C. XRD analysis was employed to examine the transformations of mineral phases during roasting process. Kinetic parameters, including reaction apparent activation energy, reaction order, and frequency factor, were calculated by the Doyle-Ozawa and Kissinger methods. Corresponding to the two endothermic peaks, the kinetic equations were obtained.

Transforming growth factor-β signaling in systemic sclerosis

Systemic sclerosis（SSc） is a complex, multiorgan autoimmune disease of unknown etiology. Manifestation of the disease results from an interaction of three key pathologic features including irregularities of the antigen-specific immune system and the non-specific Immune system, resulting in autoantibody production, vascular endothelial activation of small blood vessels, and tissue fibrosis as a result of fibroblast dysfunction. Given the heterogeneity of clinical presentation of the disease, a lack of universal models has impeded adequate testing of potential therapies for SSc. Regardless, recent research has elucidated the roles of various ubiquitous molecular mechanisms that contribute to the clinical manifestation of the disease. Transforming growth factor β（TGF-β） has been identified as a regulator of pathological fibrogenesis in SSc. Various processes, including cell growth, apoptosis, cell differentiation, and extracellular matrix synthesis are regulated by TGF-β,a type of cytokine secreted by macrophages and many other cell types. Understanding the essential role TGF-β pathways play in the pathology of systemic sclerosis could provide a potential outlet for treatment and a better understanding of this severe disease.

Driving mechanisms of nitrogen transport and transformation in lacustrine wetlands

As an essential component of proteins and genetic material for all organisms, nitrogen(N) is one of the major limiting factors that control the dynamics, biodiversity and functioning of lacustrine wetlands, in which intensified N biogeochemical activities take place. Reactive N loaded into wetland ecosystems has been doubled due to various human activities, including industrial, agricultural activities and urbanization. The main driving mechanisms of N transport and transformation in lacustrine wetlands are categorized to pushing forces and pulling forces in this study. Geomorphology, wetland age, N concentrations, and temperature are the main pushing forces(passive forces); whereas water table variation, oxygen concentration, other elements availability, oxidation-reduction potential(Eh) and p H, and microorganisms are the predominant pulling forces(active forces). The direction and kinetic energy of reactions are determined by pulling forces and then are stimulated by pushing forces. These two types of forces are analyzed and discussed separately. Based on the analysis of driving mechanisms, possible solutions to wetland N pollutions are proposed at individual, regional and global scales, respectively. Additional research needs are addressed to obtain a thorough understanding of N transport and transformations in wetlands and to reduce detrimental impacts of excessive N on such fragile ecosystems.

In situ Fourier Transform Infrared Spectroscopy Diagnostic for Characterization and Performance Test of Catalysts

The present work establishes a systematic approach based on the application of in-situ Fourier transform infrared spectroscopy （FTIR） for the investigation of the crystal structure, thermal stability, redox behavior （temperature-programmed reduction/temperatureprogrammed re-oxidation） as well as the catalytic properties of Co3O4 thin films. The syntheses of Co3O4 were achieved by chemical vapor deposition in the temperature range of 400-500℃. The structure analysis of the as-prepared material revealed the presence of two prominent IR bands peaking at 544 cm-1 （υ1） and 650 cm-1 （υ2） respectively, which originate from the stretching vibrations of the Co-O bond, characteristic of the Co3O4 spinel. The lattice stability limit of Co3O4 was estimated to be above 650℃. The redox properties of the spinel structure were determined by integrating the area under the emission bands υ1 and υ2 as a function of the temperature. Moreover, Co3O4 has been successfully tested as a catalyst towards complete oxidation of dimethyl ether below 340 ℃. The exhaust gas analysis during the catalytic process by in situ absorption FTIR revealed that only CO2 and H2O were detected as the final products in the catalytic reaction. The redox behavior suggests that the oxidation of dimethyl ether over Co3O4 follows a Mars-van Krevelen type mechanism. The comprehensive application of in situ FTIR provides a novel diagnostic tool in characterization and performance test of catalysts.

On Quantum Mechanical Hankel Transform and Its Applications

Based on our preceding works of how to relate the mathematical Hankel transform to quantum mechanical representation transform and how to express the Bessel equation by an operator identity in some appropriate representations we propose the concept of quantum mechanical Hankel transform with regard to quantum state vectors. Then we discuss its new applications.

TRANSFORM THE MECHANISM OF RENMINBI’S EXCHANGE RATE SYSTEM IN CONFORMITY WITH THE DEMAND OF MARKET ECONOMY——The academic report delivered at the Annual Meeting of NNCIFS on October 1993

Exchange rate functions under systems of centrallyplanned economy and market economy are quite different,and the mechanism to determine such exchange rate is alsodifferent. To adopt a socialist market economic system inChina, the exchange rate mechanism of Renminbi must bethoroughly transformed. To accomplish this goal, I believethere are three problems that must be solved: first,