The effect of thermal cycling under loading on martensitic transformation and two-way shape memory effect was investigated for Ti-49.8 at, pet Ni alloy. It is shown that M(s), and M(f) temperature increase with increa...The effect of thermal cycling under loading on martensitic transformation and two-way shape memory effect was investigated for Ti-49.8 at, pet Ni alloy. It is shown that M(s), and M(f) temperature increase with increasing the number of cycles, while A(s) and A(f) temperature decrease during thermal cycling. The total strain at and permanent strain epsilon (p) increase with increasing applied stress and number of cycles. The two-way shape memory effect can be improved by proper thermal cycling training under loading, while excessively high applied stress results in the deterioration of TWSME. The reason for the changes in martensitic transformation characteristics and two-way shape memory effect during thermal cycling under loading is discussed based on the analysis of microstructure by TEM observations.展开更多
This paper transforms combined loads, applied at an arbitrary point of a thin-walled open section beam, to the shear centre of the cross-section of the beam. Therein, a generalized transformation matrix for loads with...This paper transforms combined loads, applied at an arbitrary point of a thin-walled open section beam, to the shear centre of the cross-section of the beam. Therein, a generalized transformation matrix for loads with respect to the shear centre is derived, this accounting for the bimoments that develop due to the way the combined loads are applied. This and the authors’ earlier paper (World Journal of Mechanics 2021, 11, 205-236) provide a full solution to the theory of thin-walled, open-section structures bearing combined loading. The earlier work identified arbitrary loading with the section’s area properties that are necessary to axial and shear stress calculations within the structure’s thin walls. In the previous paper attention is paid to the relevant axes of loading and to the transformations of loading required between axes for stress calculations arising from tension/compression, bending, torsion and shear. The derivation of the general transformation matrix applies to all types of loadings including, axial tensile and compression forces, transverse shear, longitudinal bending. One application, representing all these load cases, is given of a simple channel cantilever with an eccentrically located end load.展开更多
Integrating heterogeneous data sources is a precondition to share data for enterprises. Highly-efficient data updating can both save system expenses, and offer real-time data. It is one of the hot issues to modify dat...Integrating heterogeneous data sources is a precondition to share data for enterprises. Highly-efficient data updating can both save system expenses, and offer real-time data. It is one of the hot issues to modify data rapidly in the pre-processing area of the data warehouse. An extract transform loading design is proposed based on a new data algorithm called Diff-Match,which is developed by utilizing mode matching and data-filtering technology. It can accelerate data renewal, filter the heterogeneous data, and seek out different sets of data. Its efficiency has been proved by its successful application in an enterprise of electric apparatus groups.展开更多
As an essential component of proteins and genetic material for all organisms, nitrogen(N) is one of the major limiting factors that control the dynamics, biodiversity and functioning of lacustrine wetlands, in which i...As an essential component of proteins and genetic material for all organisms, nitrogen(N) is one of the major limiting factors that control the dynamics, biodiversity and functioning of lacustrine wetlands, in which intensified N biogeochemical activities take place. Reactive N loaded into wetland ecosystems has been doubled due to various human activities, including industrial, agricultural activities and urbanization. The main driving mechanisms of N transport and transformation in lacustrine wetlands are categorized to pushing forces and pulling forces in this study. Geomorphology, wetland age, N concentrations, and temperature are the main pushing forces(passive forces); whereas water table variation, oxygen concentration, other elements availability, oxidation-reduction potential(Eh) and p H, and microorganisms are the predominant pulling forces(active forces). The direction and kinetic energy of reactions are determined by pulling forces and then are stimulated by pushing forces. These two types of forces are analyzed and discussed separately. Based on the analysis of driving mechanisms, possible solutions to wetland N pollutions are proposed at individual, regional and global scales, respectively. Additional research needs are addressed to obtain a thorough understanding of N transport and transformations in wetlands and to reduce detrimental impacts of excessive N on such fragile ecosystems.展开更多
文摘The effect of thermal cycling under loading on martensitic transformation and two-way shape memory effect was investigated for Ti-49.8 at, pet Ni alloy. It is shown that M(s), and M(f) temperature increase with increasing the number of cycles, while A(s) and A(f) temperature decrease during thermal cycling. The total strain at and permanent strain epsilon (p) increase with increasing applied stress and number of cycles. The two-way shape memory effect can be improved by proper thermal cycling training under loading, while excessively high applied stress results in the deterioration of TWSME. The reason for the changes in martensitic transformation characteristics and two-way shape memory effect during thermal cycling under loading is discussed based on the analysis of microstructure by TEM observations.
文摘This paper transforms combined loads, applied at an arbitrary point of a thin-walled open section beam, to the shear centre of the cross-section of the beam. Therein, a generalized transformation matrix for loads with respect to the shear centre is derived, this accounting for the bimoments that develop due to the way the combined loads are applied. This and the authors’ earlier paper (World Journal of Mechanics 2021, 11, 205-236) provide a full solution to the theory of thin-walled, open-section structures bearing combined loading. The earlier work identified arbitrary loading with the section’s area properties that are necessary to axial and shear stress calculations within the structure’s thin walls. In the previous paper attention is paid to the relevant axes of loading and to the transformations of loading required between axes for stress calculations arising from tension/compression, bending, torsion and shear. The derivation of the general transformation matrix applies to all types of loadings including, axial tensile and compression forces, transverse shear, longitudinal bending. One application, representing all these load cases, is given of a simple channel cantilever with an eccentrically located end load.
基金Supported by National Natural Science Foundation of China (No. 50475117)Tianjin Natural Science Foundation (No.06YFJMJC03700).
文摘Integrating heterogeneous data sources is a precondition to share data for enterprises. Highly-efficient data updating can both save system expenses, and offer real-time data. It is one of the hot issues to modify data rapidly in the pre-processing area of the data warehouse. An extract transform loading design is proposed based on a new data algorithm called Diff-Match,which is developed by utilizing mode matching and data-filtering technology. It can accelerate data renewal, filter the heterogeneous data, and seek out different sets of data. Its efficiency has been proved by its successful application in an enterprise of electric apparatus groups.
基金the National Natural Science Foundation of China (Grant No. 41272249)Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20110072110020)
文摘As an essential component of proteins and genetic material for all organisms, nitrogen(N) is one of the major limiting factors that control the dynamics, biodiversity and functioning of lacustrine wetlands, in which intensified N biogeochemical activities take place. Reactive N loaded into wetland ecosystems has been doubled due to various human activities, including industrial, agricultural activities and urbanization. The main driving mechanisms of N transport and transformation in lacustrine wetlands are categorized to pushing forces and pulling forces in this study. Geomorphology, wetland age, N concentrations, and temperature are the main pushing forces(passive forces); whereas water table variation, oxygen concentration, other elements availability, oxidation-reduction potential(Eh) and p H, and microorganisms are the predominant pulling forces(active forces). The direction and kinetic energy of reactions are determined by pulling forces and then are stimulated by pushing forces. These two types of forces are analyzed and discussed separately. Based on the analysis of driving mechanisms, possible solutions to wetland N pollutions are proposed at individual, regional and global scales, respectively. Additional research needs are addressed to obtain a thorough understanding of N transport and transformations in wetlands and to reduce detrimental impacts of excessive N on such fragile ecosystems.
