Self-centering seismic retrofit scheme for reinforced concrete frame structures:SDOF system study

This paper presents the results of a parametric study of self-centering seismic retrofit schemes for reinforced concrete (RC) frame buildings. The self-centering retrofit system features flag-shaped hysteresis and minimal residual deformation. For comparison purpose,an alternate seismic retrofit scheme that uses a bilinear-hysteresis retrofit system such as buckling-restrained braces (BRB) is also considered in this paper. The parametric study was carried out in a single-degree-of-freedom (SDOF) system framework since a multi-story building structure may be idealized as an equivalent SDOF system and investigation of the performance of this equivalent SDOF system can provide insight into the seismic response of the multi-story building. A peak-oriented hysteresis model which can consider the strength and stiffness degradation is used to describe the hysteretic behavior of RC structures. The parametric study involves two key parameters -the strength ratio and elastic stiffness ratio between the seismic retrofit system and the original RC frame. An ensemble of 172 earthquake ground motion records scaled to the design basis earthquake in California with a probability of exceedance of 10% in 50 years was constructed for the simulation-based parametric study. The effectiveness of the two seismic retrofit schemes considered in this study is evaluated in terms of peak displacement ratio,peak acceleration ratio,energy dissipation demand ratio and residual displacement ratio between the SDOF systems with and without retrofit. It is found from this parametric study that RC structures retrofitted with the self-centering retrofit scheme (SCRS) can achieve a seismic performance level comparable to the bilinear-hysteresis retrofit scheme (BHRS) in terms of peak displacement and energy dissipation demand ratio while having negligible residual displacement after earthquake.

Study of the seismic response of a recycled aggregate concrete frame structure

Based on six-degree-of-freedom three-dimensional shaking table tests, the seismic response of a recycled aggregate concrete （RAC） frame was obtained. The analysis results indicate that the maximum story shear force and overturning moment reduce proportionally along the height of the model under the same earthquake wave. The story shear force, base shear coefficient and overturning moment of the structure increase progressively as the acceleration amplitude increases. The base shear coefficient is primarily controlled by the peak ground acceleration （PGA）. The relationships between the PGA and the shear coefficient as well as between the PGA and the dynamic amplification factor are obtained by mathematical fitting. The dynamic amplification factor decreases rapidly at the elastic-plastic stage, but decreases slowly with the development of the elastic-plasticity stage. The results show that the RAC frame structure has reasonable deformability when compared with natural aggregate concrete frame structures. The maximum inter-story drift ratios of the RAC frame model under frequent and rare intensity 8 test phases are 1/266 and 1/29, respectively, which are larger than the allowable value of 1/500 and 1/50 according to Chinese seismic design requirements. Nevertheless, the RAC frame structure does not collapse under base excitations with PGAs from 0.066 g up to 1.170 g.

Pseudo-dynamic test and numerical simulation of high-strength concrete frame structure reinforced with high-strength rebars

This paper describes an investigation of a high-strength concrete frame reinforced with high-strength rebars that was tested in the structure engineering laboratory at Shenyang Jianzhu University. The frame specimen was pseudo- dynamically loaded to indicate three earthquake ground motions of different hazard levels, after which the test specimen was subjected to a pseudo-static loading. This paper focuses on the design, construction and experiment of the test frame and validation of the simulation models. Research shows that a high-strength concrete frame reinforced with high-strength rebars is more efficient and economical than a traditional reinforced concrete frame structure. In addition to the economies achieved by effective use of materials, research shows that the frame can provide enough strength to exceed conventional reinforced concrete frames and provide acceptable ductility. The test study provides evidence to validate the performance of a high- strength concrete frame designed according to current seismic code provisions. Based on previous test research, a nonlinear FEM analysis is completcd by using OpenSees software, The dynamic responses of the frame structure are numerically analyzed, The results of the numerical simulation show that the model can calculate the seismic responses of the frame by OpenSees. At the same time, the test provides additional opportunities to validate the performance of the simulation models.

Effects of edge beams on mechanic behavior under lateral load in reinforced concrete hollow slab-column structure

In order to get the formulae for calculating the equivalent frame width coefficient of reinforced concrete hollow slab-column structures with edge beam,the finite element structural program was used in the elastic analysis of reinforced concrete hollow slab-column structure with different dimensions to study internal relationship between effective beam width and the frame dimensions.In addition,the formulas for calculating the increasing coefficient of edge beam were also obtained.

Research on the direct damage-based seismic design method of RC frame structures

Based on the existing research, this paper presents an innovative methodology to realize direct damage-based seismic design for RC frame structures by mobilizing ESDOF theory and the damage-based strength reduction factor（RD factor）. A design example is then followed to verify this method.

Research on Seismic Reliability and Damage of Reinforced Concrete Frame

This paper first introduces the basic principle of seismic risk analysis, and then put forward the basic concept of structures global seismic fragility, aiming at the existing problems of traditional analysis method, combined the method of analytical approximation degree of structure reliability with Performance-Based Seismic Design （PBSD）, put forward the analysis method of structural reliability and the performance of the global seismic fragility, are calculated by using the finite element reliability method of structures global seismic fragility. Taking the maximum interlamination relative deformation as indicators of overall performance, we analyze seismic fragility of five storey RC frame structure, rendering the seismic fragility curves corresponding to different performance requirements and different earthquake action.

高延性混凝土加固单层砖木结构农房振动台试验研究

为提高我国农村砌体房屋的抗震性能水平,采用高延性混凝土(HDC)条带加固的方法,设计了两个缩尺比为1∶2的砖木结构模型,对加固模型与未加固模型进行振动台同台对比试验。对比分析了地震作用下两个模型结构的加速度响应、位移响应、扭转效应和破坏形态,并对其抗震性能进行评估。试验结果表明:单层砖木结构农房的整体抗震性能较差,结构的自振频率低、位移反应较大,扭转效应明显,在8度设防地震作用下接近倒塌;经HDC条带加固的模型结构自振频率增大,位移反应相比未加固模型更小,山墙外闪现象得到明显控制,结构扭转效应的破坏作用明显减轻,在9度罕遇地震作用下HDC面层只出现轻微受损,可达到“大震可修”的性能目标。采用HDC条带加固法可有效延缓结构在强震作用下的刚度退化,增加结构的耐损伤能力,并有效提高此类砌体结构的整体抗震能力。

设有叠合柱的局部错层RC框架结构地震易损性分析

为研究某一设有叠合柱的局部错层钢筋混凝土(reinforced concrete,RC)框架结构在近断层和远场地震作用下的破坏概率,自定义钢管混凝土叠合柱塑性铰参数,并与试验对比验证塑性铰参数的有效性。采用SAP2000建立非线性分析模型,选取近断层和远场地震波共22条,分别以地震峰值加速度(peak ground acceleration,PGA)和最大层间位移角作为地震动强度指标和结构性能指标,基于增量动力分析(incremental dynamic analysis,IDA)结果和点估计函数对错层框架结构进行易损性分析。结果表明:对于远场地震动,结构满足“三水准”抗震设防要求,在罕遇地震下超越防止倒塌极限状态的概率仅为0.24%;结构在近断层多遇地震下仍能满足“小震不坏”的设计要求,设防地震下结构超越修复后使用极限状态的概率为53.63%,发生中等破坏的概率较大,罕遇地震下结构达到倒塌极限状态的概率为5.37%,较远场地震作用破坏更为严重。研究结果可为错层框架结构的设计和地震风险评估提供参考。

装配式轻钢框架-轻钢骨架轻混凝土墙板结构抗震性能

为研究装配式轻钢框架-轻钢骨架轻混凝土墙板结构抗震性能,对1个足尺轻钢框架结构试件和3个足尺轻钢框架-轻钢骨架轻混凝土墙板结构试件进行了低周反复荷载下的抗震性能试验及理论分析,试件变量包括:2种装配构造,即内嵌式装配墙板、外贴式装配墙板;2种轻钢骨架轻混凝土墙板,即框架式轻钢骨架轻混凝土墙板、桁架式轻钢骨架轻混凝土墙板。研究了各试件的破坏特征和损伤演化过程,分析了结构滞回特性、承载力、变形能力、刚度退化、耗能性能和应变。结果表明:装配式轻钢框架-轻钢骨架轻混凝土墙板结构共同工作性能良好,其水平承载力相比轻钢框架提高了204.7%~210.4%,抗侧刚度提高了257.3%~512.5%,结构变形及耗能能力有显著提高;内嵌墙板的自攻钉连接构造以及外贴墙板的螺栓连接构造传力性能可靠,结构具备2道抗震防线的受力特征;基于简化塑性分析模型以及拉压杆软化桁架模型,对试件承载力进行了计算,计算结果与试验符合较好。

附设黏滞阻尼器的RC框架结构抗震韧性评估

为研究黏滞阻尼器对钢筋混凝土(reinforced concrete,RC)框架结构抗震韧性影响,基于增量动力时程分析方法,对附设黏滞阻尼器的RC框架结构开展抗震韧性能力评估。结合FEMA P-58以及我国抗震韧性评价标准,将主要受损构件的修复费用、修复时间曲线以及易损性信息按实际情况进行相应修正,并对无控结构和有控结构的修复费用、修复时间和人员伤亡等主要抗震韧性指标进行对比分析,明确了黏滞阻尼器对RC框架结构抗震韧性的影响。研究表明,在RC框架结构中适当设置黏滞阻尼器不仅能够减小结构地震响应、降低结构破坏概率,还能有效提升结构抗震韧性。

功能可恢复RCS混合框架结构研究进展

钢筋混凝土柱-钢梁(RCS)混合框架结构以其结合了混凝土优异的抗压性能及钢材优异的抗弯性能而受到广泛关注,而可恢复功能结构以其震后快速恢复使用功能的能力,也成为地震工程界研究的新热点。功能可恢复RCS混合框架结构可以在弯矩较大的梁端和柱脚部位设置可更换构件,实现结构的功能可恢复能力。文中简述了近年来功能可恢复RCS混合框架结构研究进展,重点关注各类型功能可恢复钢梁、功能可恢复摇摆柱脚的构造研究,介绍了功能可恢复RCS混合框架结构性能分析研究进展。最后,对功能可恢复RCS混合框架结构仍需深入研究的问题进行了展望。

川南地区砖混结构房屋典型震害及地震易损性研究

以川南地区为研究区,并以在建造方式上具有明显当地地域特征的砖混结构房屋为研究对象,结合砖混结构房屋建造特点及川南历史地震(如长宁6.0级地震)震害调查结果等,分析砖混结构房屋典型震害特征,统计其在不同烈度下不同破坏等级的比例,采用经验分析法得到初步的易损性矩阵。在此基础上,针对因样本局限性造成的结构在高烈度下破坏比例不全,使实际易损性矩阵缺失的问题,通过插值法,推算高烈度下的破坏比例,补全经验易损性矩阵,拟合出易损性曲线,建立以震害统计为主、数值模拟为辅的砖混结构易损性分析模型;并基于平均震害指数对比分析,对易损性分析的可靠性进行检验。结果表明,构建的易损性矩阵能客观反映川南地区砖混结构房屋的抗震能力,对开展震害预测、灾害损失评估及震害风险评估等工作具有实际应用价值。

乌兹别克斯坦9度区某超高层建筑结构设计与优化

对于9度设防地区的超高层建筑,其结构设计基本由地震作用控制,因此抗震设计尤为重要。建筑消能减震技术可在提高结构地震安全储备的同时,降低整体工程造价,是结构优化设计的有效措施。对位于9度区的超高层建筑进行了结构方案选型对比、结构方案优化、减震设计方案比选、剪力墙内嵌钢板优化。结果显示,钢骨混凝土框架⁃核心筒方案相对于钢框架⁃支撑方案具备更高的成本优势;框架⁃核心筒方案可通过精细化设计作进一步优化;在此基础上,对钢骨混凝土框架⁃核心筒方案采用两种消能减震方案进行比选,结果表明,采用黏滞阻尼器方案的结构抗震性能明显优于采用黏滞阻尼墙方案;最后通过增大剪力墙竖向分布钢筋配筋率,对低区核心筒墙肢中的内嵌钢板进行了优化。

钢管混凝土键连接框架梁和剪力墙的受剪性能

目的 研究钢管混凝土键连接框架梁和剪力墙的受剪性能,为工程应用提供设计依据。方法 应用有限元分析软件ABAQUS对比钢管混凝土键连接与现浇连接梁墙的结构受剪性能,分析前者受剪机理及不同因素对受剪性能的影响。结果 钢管混凝土键连接梁墙的结构承载力和延性系数较现浇结构分别提高约10%和34%;钢材强度从Q235到Q390,初始刚度增加8.44%;截面高度从100 mm到120 mm,延性系数提高17.73%;截面厚度每增加2 mm,承载力提高约15%;截面长度和混凝土强度等级对承载力、初始刚度和延性系数的影响均小于15%,纵向距离对其受剪性能几乎无影响。结论 采用钢管混凝土键连接梁墙的结构总体受剪性能优于现浇结构;钢材强度和截面厚度分别是影响初始刚度和承载力的主要因素。

提升RC框架结构抗震韧性的冗余柱性能分析

本文提出了一种通过设置可更换冗余柱以增强钢筋混凝土框架结构抗震韧性的方法。通过冗余柱纵筋在钢筋机械套筒里的锚固长度以控制冗余柱与框架连接节点处的钢筋失效,节点的刚性连接转变为铰链连接。以钢筋直径和锚固长度为变量,对钢筋机械连接套筒试件进行了13组拉伸试验和6组高应力拉压试验,每组包含3个试件,一个试件包含两段钢筋和一个机械套筒。试验结果表明,适当设计机械连接套筒锚固长度,可实现可控成铰性能。将实测数据应用于冗余柱的截面和构件仿真分析中,证明可通过改变钢筋于套筒锚固长度控制当冗余柱极限变形达到设计值时柱端自动成铰,使冗余柱损坏后仍为关键结构柱提供竖向承载能力,同时保护关键柱在遭遇强震时不易发生严重破坏。

滑坡诱发农村山区砖混结构变形及演化规律研究

作为西南山区最为频发的地质灾害之一,滑坡对山区中大量存在的砖混房屋造成严重影响,尤其农村山区中受灾最为严重,给人民群众生产生活造成巨大安全隐患.研究滑坡引起的上部砖混结构变形特征,对科学指导房屋设计防护及灾后监测点布置具有重要现实意义.本文以酉阳高园子滑坡为例,通过现场调查和裂缝参数拟合研究了滑坡区砖混结构变形破坏特征.同时基于PFC3D,构建了有限体积-离散元(Finite Volume Method-Discrete Element Method,FVM-DEM)滑坡-房屋单向耦合模型,模拟并分析了在不同工况下滑坡动态发育过程,进一步揭示了房屋裂缝产生及演化过程.结果表明:相比于普通无柱砖混结构,底框结构抵抗滑坡诱发变形破坏的能力更强,并且处于前后缘段的房屋相对中段房屋更易出现损伤破坏;房屋的长宽比不宜过小,布置房屋长边走向平行斜坡走向有利于减少滑坡对房屋造成的破坏.本文总结了在滑坡作用下,上部砖混结构的变形特征和裂缝开展规律,可为农村山区砖混结构设计和布置提供参考.

装配式可更换分级屈服耗能连接集成形状优化及试验研究

为增强装配式混凝土框架结构的可恢复性,提出一种可更换分级屈服耗能连接,通过在梁-柱节点处设置该连接可实现对结构屈服过程的有效控制。针对分级屈服耗能连接中的弯剪部件,基于等效应力屈服强度理论推导得到弯剪部件考虑等应力屈服的形状曲线,通过Python集成Abaqus数值模型和优化算法获得低周疲劳性能最优的形状曲线。对5个分级屈服耗能连接试件开展低周往复加载试验,研究其滞回性能和变形能力等抗震性能,评价形状优化后分级屈服耗能连接的性能水平,并对弯剪部件影响参数进行分析。结果表明:优化后弯剪部件的塑性应变分布更加均匀,耗能能力和材料利用率明显提高;同时弯剪部件经优化后的分级屈服耗能连接试件变形能力显著增强;随着弯剪部件的等应力屈服高度比或高宽比减小,分级屈服耗能连接的承载能力和耗能能力均逐渐提高,但刚度退化速率逐渐加快;各试件变形及损伤主要集中在弯剪部件和屈曲部件,且均实现了分级屈服的耗能机制,说明分级屈服耗能连接能够有效控制结构的屈服过程。

装配式型钢混凝土叠合框架梁连接节点构造设置与安全分析

住房和城乡建设部印发《“十四五”建筑业发展规划》提出大力发展装配式建筑、推动生产和施工智能化升级的主要任务。而国内目前采用的预制叠合框架梁存在着跨度大自重大吊装成本高、预制梁柱节点位置易发生钢筋碰撞吊装定位难度大等问题,限制了装配式建筑结构的发展。结合实际工程项目,提出一种新型的装配式型钢混凝土叠合框架梁,并对该叠合梁的构造设置、连接方式及安全性进行分析,从而为装配式框架结构、框架—剪力墙结构等装配式建筑中框架梁的深化设计提供一种新的拆分方案。

基于天牛须算法的钢筋混凝土框架结构优化

为使天牛须算法适用于解决钢筋混凝土框架离散变量结构优化问题,将天牛须算法进行改进,对天牛位置更新进行离散化处理。通过对两个钢筋混凝土框架结构优化算例进行分析,其结果表明:改进后的天牛须算法相较于遗传算法具有更好的优化效率。因此改进后的天牛须算法是一种适用于钢筋混凝土框架结构优化的智能优化算法。

6.4级漾濞地震某RC框架及其非结构部件震害分析

2021年云南漾濞6.4级地震造成了较大范围的建筑破坏,在漾濞县城记录到的地震加速峰值(PGA)高达720.2 gal。在强震作用下,大量土木结构的民居发生了破坏,而约束砌体和钢筋混凝土(RC)结构的震害则相对较轻。现场震害调查发现,部分框架结构的震害明显重于同一区域的其他同类型结构,呈现明显、多样的非结构部件破坏特征。因此,该文对某震害较重的框架进行详细调查,分类分析结构及其非结构部件地震破坏细节;依据图纸及现场考察信息建立精细有限元分析模型,对此次地震的地震动破坏力特征以及该框架结构及其非结构部件的地震破坏机理进行了量化分析。分析结果表明:带填充墙框架仿真模型的分析结果与实际震害现象更接近;框架结构局部大空间、框架底部的约束形式和填充墙的布置形式的综合作用导致结构产生局部过大变形与各类非结构部件的严重破坏。在考虑填充墙对框架结构的作用效应后,结构的不规则性大幅增加,导致结构薄弱层的最大层间位移角相较纯框架模型增加127%,并且明显加剧非结构部件的震害。该文对该建筑震害现象的详细调查与仿真分析,可为结构抗震设计与应急救援决策提供参考。