The transient plane source(TPS)method is developed recently to measure the thermal conductivity of materials.In the measurement,the heating power is influenced by the heat which is transferred via the probe electrical...The transient plane source(TPS)method is developed recently to measure the thermal conductivity of materials.In the measurement,the heating power is influenced by the heat which is transferred via the probe electrical leads.This fact further influences the measurement accuracy of thermal conductivity.To solve this problem,the influence of heat loss through the electrical leads on the heating power is studied theoretically.The mathematical formula of heat loss is deduced,and the corresponding correction model is presented.A series of measurement experiments on different materials have been conducted by using the hot disk thermal constant analyzer.The results show that the influence of the heat loss on the measurement is sensitive to different test materials and probes with different sizes.When the thermal conductivity of the material is greater than 0.2 W/(m·K),the influence of the heat loss is less than 0.16%,which can be ignored.As to the lower thermal conductivity materials,it is necessary to compensate the heat loss through the electrical leads,and the accuracy of thermal conductivity measurement can be effectively improved.展开更多
Based on the traditional measurement theory of transient plane source (TPS) technique, single-side TPS method is proposed for measuring the thermal conductivity of single specimen. The problem of transient heat conduc...Based on the traditional measurement theory of transient plane source (TPS) technique, single-side TPS method is proposed for measuring the thermal conductivity of single specimen. The problem of transient heat conduction in a semi-infinite boundary condition is studied and the theoretical formula of single-side TPS method is deduced. During the measurement, the influence of the probe heat capacity on the results is analyzed and the corresponding mathematical compensation model is established, and a series of experiments on different materials are conducted by hot disk probe at normal temperature and pressure. The results show that the relative error with the single-side TPS method is less than 5% and the relative standard deviation is no greater than 3%. This method has high accuracy and good reproducibility, which provides a feasible measuring method for single material that does not meet the requirements of the standard TPS theory.展开更多
文摘为研究接触热阻对瞬态平面热源(transient plane source,TPS)法测量高聚物薄膜热导率的影响规律以便提高测量准确度,阐述TPS法基本测量原理,根据串联热路中热阻的关系建立接触热阻的简化计算模型,以不同厚度硅橡胶薄膜为对象,通过回归分析的方法获得接触热阻随压力的变化规律,利用此规律测量单一厚度聚四氟乙烯薄膜和聚酯薄膜的热导率。结果表明:当未施加压力时,接触热阻的存在导致测量结果的相对误差为10%~30%,接触热阻会随压力的增大近似呈非线性关系减小,当压力达到200 k Pa时,可减小测量误差到6%以内。同种材质的高聚物薄膜还可通过改变厚度来减小接触热阻。
文摘The transient plane source(TPS)method is developed recently to measure the thermal conductivity of materials.In the measurement,the heating power is influenced by the heat which is transferred via the probe electrical leads.This fact further influences the measurement accuracy of thermal conductivity.To solve this problem,the influence of heat loss through the electrical leads on the heating power is studied theoretically.The mathematical formula of heat loss is deduced,and the corresponding correction model is presented.A series of measurement experiments on different materials have been conducted by using the hot disk thermal constant analyzer.The results show that the influence of the heat loss on the measurement is sensitive to different test materials and probes with different sizes.When the thermal conductivity of the material is greater than 0.2 W/(m·K),the influence of the heat loss is less than 0.16%,which can be ignored.As to the lower thermal conductivity materials,it is necessary to compensate the heat loss through the electrical leads,and the accuracy of thermal conductivity measurement can be effectively improved.
文摘Based on the traditional measurement theory of transient plane source (TPS) technique, single-side TPS method is proposed for measuring the thermal conductivity of single specimen. The problem of transient heat conduction in a semi-infinite boundary condition is studied and the theoretical formula of single-side TPS method is deduced. During the measurement, the influence of the probe heat capacity on the results is analyzed and the corresponding mathematical compensation model is established, and a series of experiments on different materials are conducted by hot disk probe at normal temperature and pressure. The results show that the relative error with the single-side TPS method is less than 5% and the relative standard deviation is no greater than 3%. This method has high accuracy and good reproducibility, which provides a feasible measuring method for single material that does not meet the requirements of the standard TPS theory.
