Studies on Functionally Substituted n5-Cyclopentadienyl Transition-Metal Compounds --Synthesis and Crystal Structure of η5-CH3COC5H4W(CO)3CH2C5H5

Reaction of benzyl chloride with η5-CH3COC5H4W(CO)2Na formed in situ from η6-CH3CO C6H4Na and W(CO)2 gives η6-CH3COC6H4W(CO)3CH2C5H5.The single crystal structure of the product was determined by X-ray diffraction method. It crystallizes in the triclinlc space group P1 with unit cell parameters a= 10.199(5),b=12.116(7), c=14.207(6)A;a=69.47(5),β=72. 38(3),γ= 85.89(4);V= 1569. 9A3, Dc= 1.98 g/cm2; Z=4. Least-square refinement led to final R value of 0. 0539 and Rw value of 0. 0553, based on 3548 independent observed reflections.

Compound 3k治疗骨关节炎:调控氧化应激通路改善软骨细胞糖酵解的作用机制

背景:骨关节炎现已被认为是一种代谢性疾病,既往研究表明糖酵解在骨关节炎的发生发展中起重要作用。Compound 3k作为一种新型糖酵解小分子抑制剂,具有抗炎及抗肿瘤等功效,因此可靶向糖酵解,有望为骨关节炎治疗提供新的思路。目的:基于缺氧诱导因子1α/活性氧的氧化应激通路探究Compound 3k在糖酵解过度活跃所导致的骨关节炎中的作用机制。方法:取对数生长期的ATDC5成软骨细胞,用10 ng/mL白细胞介素1β作用24 h诱导骨关节炎体外细胞模型,以CCK-8法检测不同浓度(0.25,0.5,1,2.5,5,10,15μmol/L)Compound 3k的细胞毒性,选出合适浓度进行后续实验。将软骨细胞随机分为对照组、模型组、治疗组,模型组以10 ng/mL的白细胞介素1β诱导,治疗组以Compound 3k预刺激2 h后与白细胞介素1β共培养,用CCK-8法检测各组细胞增殖情况;用ELISA试剂盒检测各组细胞炎症水平;用试剂盒检测各组细胞活性氧、细胞外乳酸脱氢酶及葡萄糖含量;qRT-PCR及Western blot检测相关炎症因子白细胞介素6、肿瘤坏死因子α及糖酵解相关基因葡萄糖转运蛋白1、甘油醛3-磷酸脱氢酶、单羧酸转运蛋白1和缺氧诱导因子1α的表达水平。结果与结论:①与对照组相比,模型组细胞增殖活性下降、糖酵解水平活跃,表现为细胞外乳酸脱氢酶含量增加(P<0.001),葡萄糖含量减少(P<0.001),相关炎症因子白细胞介素6(P<0.0001)及肿瘤坏死因子α(P<0.001),糖酵解相关基因葡萄糖转运蛋白1(P<0.001)、甘油醛3-磷酸脱氢酶(P<0.001)、单羧酸转运蛋白1(P<0.001)及缺氧诱导因子1α(P<0.001)的表达水平均上调,并伴随氧化应激,活性氧过量产生。②与模型组相比,Compound 3k的治疗有效提高细胞增殖活性,抑制过度活跃的糖酵解水平的同时,抑制了骨关节炎软骨细胞炎症(P<0.001)及糖酵解相关基因的表达(P<0.001),且抑制氧化应激,缺氧诱导因子1α的表达水平下调(P<0.0001),活性氧水平下降。③上述结果证实,Compound 3k抑制了白细胞介素1β诱导的软骨细胞炎症,其机制可能与糖酵解及缺氧诱导因子1α/活性氧介导的氧化应激有关。

Pulsed laser interference patterning of transition-metal carbides for stable alkaline water electrolysis kinetics

We investigated the role of metal atomization and solvent decomposition into reductive species and carbon clusters in the phase formation of transition-metal carbides(TMCs;namely,Co_(3)C,Fe_(3)C,TiC,and MoC)by pulsed laser ablation of Co,Fe,Ti,and Mo metals in acetone.The interaction between carbon s-p-orbitals and metal d-orbitals causes a redistribution of valence structure through charge transfer,leading to the formation of surface defects as observed by X-ray photoelectron spectroscopy.These defects influence the evolved TMCs,making them effective for hydrogen and oxygen evolution reactions(HER and OER)in an alkaline medium.Co_(3)C with more oxygen affinity promoted CoO(OH)intermediates,and the electrochemical surface oxidation to Co_(3)O_(4)was captured via in situ/operando electrochemical Raman probes,increasing the number of active sites for OER activity.MoC with more d-vacancies exhibits strong hydrogen binding,promoting HER kinetics,whereas Fe_(3)C and TiC with more defect states to trap charge carriers may hinder both OER and HER activities.The results show that the assembled membrane-less electrolyzer with Co_(3)C∥Co_(3)C and MoC∥MoC electrodes requires~2.01 and 1.99 V,respectively,to deliver a 10 mA cm−2 with excellent electrochemical and structural stability.In addition,the ascertained pulsed laser synthesis mechanism and unit-cell packing relations will open up sustainable pathways for obtaining highly stable electrocatalysts for electrolyzers.

A New Coordinated Transition-metal Linked Network Compound Constructed by Octamolybdate Chain

A novel transition-metal ion coordination-linked network compound {Na4[Co- (H2O)2(NH2NH2)2Mo8O27]?16H2O}n 1 was synthesized by the reduction reaction of Na2MoO4? 2H2O, NH2NH2?2HCl and Co(OAc)2?4H2O in aqueous solution at ambient temperature and structurally characterized. Crystal data for 1: triclinic system, space group P1, a = 9.5544(2), b = 9.8640(2), c = 11.6338(3) ?, α = 103.3790(10), β = 100.5600(10), γ = 96.2750(10)o, V = 1035.32(4) ?3, Z = 1, Dc = 2.789 g/cm3 and R = 0.0453. The X-ray crystal structure analysis shows that 1 is constructed by octamolybdate anions linked via corner-sharing interactions and hetero-metal links into the polymeric anionic sheet [Co(H2O)2(NH2NH2)2Mo8O27]n 4n-, and further allied by [Na4(H2O)12]n 4n+ sodium chains into a 3D framework with z-shaped channels. The mag- netic study of compound 1 indicates that weak antiferromagnetic coupling interaction occurs be- tween the cobalt centers.

Dioxygen Affinities and Catalytic Epoxidation Performanceof Transition-Metal Hydroxamates

The dioxygen affinities and catalytic epoxidation performance of transition-metal hydroxamates were investigated for the first time. The effects of substituents on these properties were also discussed in the paper.

Layered transition-metal hydroxides for alkaline hydrogen evolution reaction

Hydrogen is a promising sustainable energy to replace fossil fuels owning to its high specific energy and environmental friendliness.Alkaline water electrolysis has been considered as one of the most prospective technologies for large scale hydrogen production.To boost the sluggish kinetics of hydrogen evolution reaction(HER)in alkaline media,abundant materials have been designed and fabricated.Herein,we summarize the key achievements in the development of layered transition-metal hydroxides[TM(OH)x]for efficient alkaline HER.Based on the structure of TM(OH)x,the mechanism of synergistic effect between TM(OH)x and HER active materials is illuminated firstly.Then,recent progress of TM(OH)x-based HER catalysts to optimize the synergistic effect are categorized as TM(OH)x and active materials,including species,structure,morphology and interaction relationship.Furthermore,TM(OH)x-based overall water splitting electrocatalysts and electrodes are summarized in the design principles for high activity and stability.Finally,some of key challenges for further developments and applications of hydrogen production are proposed.

Exploring single atom catalysts of transition-metal doped phosphorus carbide monolayer for HER:A first-principles study

Hydrogen has been identified as one of the most promising sustainable and clean energy. Developing hydrogen evolution reaction(HER) catalyst with high activity is essential for satisfying the future requirements. Considering novel advantages of two-dimensional materials and high catalytic activity of atomic transition metal, in this study, using density functional theory calculation, the HER on single transitionmetal(23 different TM atoms) doped phosphorus carbide monolayer(α-PC) has been investigated. The Volmer–Tafel and Volmer–Heyrovsky reaction mechanisms, and the stability of the most promising HER catalyst are also included. The results show that Ir-αPC with high physical and thermal stability has the most optimal value of Gibbs free adsorption energy for H atom. The relationship of d band center and the HER activity shows a volcano-like curve. The calculation of reaction energy barrier indicates that the Volmer-Heyrovsky step is more favorable than the Volmer-Tafel step.

Environmental Analysis with 2D Transition-Metal Dichalcogenide-Based Field-Effect Transistors

Field-effect transistors(FETs)present highly sensitive,rapid,and in situ detection capability in chemical and biological analysis.Recently,two-dimensional(2D)transition-metal dichalcogenides(TMDCs)attract significant attention as FET channel due to their unique structures and outstanding properties.With the booming of studies on TMDC FETs,we aim to give a timely review on TMDCbased FET sensors for environmental analysis in different media.First,theoretical basics on TMDC and FET sensor are introduced.Then,recent advances of TMDC FET sensor for pollutant detection in gaseous and aqueous media are,respectively,discussed.At last,future perspectives and challenges in practical application and commercialization are given for TMDC FET sensors.This article provides an overview on TMDC sensors for a wide variety of analytes with an emphasize on the increasing demand of advanced sensing technologies in environmental analysis.

Role of transition-metal electrocatalysts for oxygen evolution with Si-based photoanodes

A comprehensive understanding of the role of the electrocatalyst in photoelectrochemical(PEC)water splitting is central to improving its performance.Herein,taking the Si-based photoanodes(n^(+)p-Si/SiO_(x)/Fe/FeOx/MOOH,M=Fe,Co,Ni)as a model system,we investigate the effect of the transition-metal electrocatalysts on the oxygen evolution reaction(OER).Among the photoanodes with the three different electrocatalysts,the best OER activity,with a low-onset potential of∼1.01 VRHE,a high photocurrent density of 24.10 mA cm^(-2)at 1.23 VRHE,and a remarkable saturation photocurrent density of 38.82 mA cm^(-2),was obtained with the NiOOH overlayer under AM 1.5G simulated sunlight(100 mW cm^(-2))in 1 M KOH electrolyte.The optimal interfacial engineering for electrocatalysts plays a key role for achieving high performance because it promotes interfacial charge transport,provides a larger number of surface active sites,and results in higher OER activity,compared to other electrocatalysts.This study provides insights into how electrocatalysts function in water-splitting devices to guide future studies of solar energy conversion.

Recent advances of transition-metal metaphosphates for efficient electrocatalytic water splitting

Sustainable production of H2 through electrochemical water splitting is of great importance in the foreseeable future.Transition-metal metaphosphates(TMMPs)have a three-dimensional(3D)open-framework structure and a high content of P(which exists as PO3-),and therefore have been recognized as highly efficient catalysts for oxygen evolution reaction(OER)and the bottleneck of electrochemical water splitting.Furthermore,TMMPs can also contribute to hydrogen evolution reaction(HER)in alkaline and neutral media by facilitating water dissociation,and thus,overall water splitting can be achieved using this kind of material.In this timely review,we summarize the recent advances in the synthesis of TMMPs and their applications in OER and HER.We present a brief introduction of the structure and synthetic strategies of TMMPs in the first two parts.Then,we review the latest progress made in research on TMMPs as OER,HER,and overall water-splitting electrocatalysts.In this part,the intrinsic activity of TMMPs as well as the current strategy for improving the catalytic activity will be discussed systematically.Finally,we present the future opportunities and the remaining challenges for the application of TMMPs in the electrocatalysis field.

Electronic structure and magnetic properties of substitutional transition-metal atoms in GaN nanotubes

The electronic structure and magnetic properties of the transition-metal （TM） atoms （Sc-Zn, Pt and Au） doped zigzag GaN single-walled nanotubes （NTs） are investigated using first-principles spin-polarized density functional calculations. Our results show that the bindings of all TM atoms are stable with the binding energy in the range of 6-16 eV. The Sc- and V-doped GaN NTs exhibit a nonmagnetic behavior. The GaN NTs doped with Ti, Mn, Ni, Cu and Pt are antiferromagnetic. On the contrary, the Cr-, Fe-, Co-, Zn- and Au-doped GaN NTs show the ferromagnetic characteristics. The Mn- and Co- doped GaN NTs induce the largest local moment of 4#B among these TM atoms. The local magnetic moment is dominated by the contribution from the substitutional TM atom and the N atoms bonded with it.

NMR and NQR studies on transition-metal arsenide superconductors LaRu2As2,KCa2Fe4As4F2,and A2Cr3As3

We report 75As-nuclear magnetic resonance(NMR)and nuclear quadrupole resonance(NQR)measurements on transition-metal arsenides LaRu2As2,KCa2Fe4As4F2,and A2Cr3As3.In the superconducting state of LaRu2As2,a Hebel–Slichter coherence peak is found in the temperature dependence of the spin-lattice relaxation rate 1/T1 just below Tc,which indicates that LaRu2As2 is a full-gap superperconducor.For KCa2Fe4As4F2,antiferromagnetic spin fluctuations are observed in the normal state.We further find that the anisotropy rate RAF=Tc 1/Tab 1 is small and temperature independent,implying that the low energy spin fluctuations are isotropic in spin space.Our results indicate that KCa2Fe4As4F2 is a moderately overdoped iron-arsenide high-temperature superconductor with a stoichiometric composition.For A2Cr3As3(A=Na,K,Rb,Cs),we calculate the electric field gradient by first-principle method and assign the 75As-NQR peaks to two crystallographically different As sites,paving the way for further NMR investigation.

Dioxygen Affinities and Biomimetic Catalytic Performance of Transition-metal Complexes with Benzoin Schiff Bases

The oxygenation constants of transition-metal complexes with benzoin Schiff bases were measured and these complexes were first employed as models for mimicking monooxygenase in catalytic epoxidation of styrene. The highest conversion and selectivity were up to 39.6% and 100% respectively at ambient temperature and pressure. The effects of structures of the bridge group R in the ligands on the dioxygen affinities and catalytic activities to epoxidize styrene were also investigated.

Interfacial engineering of transition-metal sulfides heterostructures with built-in electric-field effects for enhanced oxygen evolution reaction

Developing highly efficient,durable,and non-noble electrocatalysts for the sluggish anodic oxygen evolution reaction(OER)is the pivotal for meeting the practical demand in water splitting.However,the current transition-metal electrocatalysts still suffer from low activity and durability on account of poor interfacial reaction kinetics.In this work,a facile solid-state synthesis strategy is developed to construct transition-metal sulfides heterostructures(denoted as MS_(2)/NiS_(2),M=Mo or W)for boosting OER electrocatalysis.As a result,MoS2/NiS2 and WS2/NiS2 show lower overpotentials of 300 mV and 320 mV to achieve the current density of 10 mA·cm^(-2),and smaller Tafel slopes of 60 mV.dec^(-1) and 83 mV.dec^(-1)in 1 mol·L^(-1) KOH,respectively,in comparison with the single MoS2,WS2,NiS2,as well as even the benchmark RuO2.The experiments reveal that the designed heterostructures have strong electronic interactions and spontaneously develop a built-in electric field at the heterointerface with uneven charge distribution based on the difference of band structures,which promote interfacial charge transfer,improve absorptivity of OH-,and modulate the energy level more comparable to the OER.Thus,the designed transition-metal sulfides heterostructures exhibit a remarkably high electrocatalytic activity for OER.This study provides a simple strategy to manipulate the heterostructure interface via an energy level engineering method for OER and can be extended to fabricate other heterostructures for various energy-related applications.

Dioxygen Affinities and Biomimetic Catalytic Performance of Transition-metal Complexes with Crowned Bis-Schiff Bases

The dioxygen affinities and biomimetic catalytic performance of transition-metal complexes with (15-crown-5) salophen and its substituted derivatives Mere examined. The oxygenation constants of Co(II) complexes with crowned bis-Schiff bases were measured and their Mn(III) complexes were employed as models to mimic monooxygenase in catalytic epoxidation of styrene. The highest conversion and selectivity were up to 57.2% and 100% respectively at ambient temperature and pressure. The effects of crown ether ring and substituents R on the dioxygen affinities and catalytic activities were also investigated through comparing with the uncrowned analogues.

Comparative evaluation of commercial Douchi by different molds:biogenic amines,non-volatile and volatile compounds

To provide new insights into the development and utilization of Douchi artificial starters,three common strains(Aspergillus oryzae,Mucor racemosus,and Rhizopus oligosporus)were used to study their influence on the fermentation of Douchi.The results showed that the biogenic amine contents of the three types of Douchi were all within the safe range and far lower than those of traditional fermented Douchi.Aspergillus-type Douchi produced more free amino acids than the other two types of Douchi,and its umami taste was more prominent in sensory evaluation(P<0.01),while Mucor-type and Rhizopus-type Douchi produced more esters and pyrazines,making the aroma,sauce,and Douchi flavor more abundant.According to the Pearson and PLS analyses results,sweetness was significantly negatively correlated with phenylalanine,cysteine,and acetic acid(P<0.05),bitterness was significantly negatively correlated with malic acid(P<0.05),the sour taste was significantly positively correlated with citric acid and most free amino acids(P<0.05),while astringency was significantly negatively correlated with glucose(P<0.001).Thirteen volatile compounds such as furfuryl alcohol,phenethyl alcohol,and benzaldehyde caused the flavor difference of three types of Douchi.This study provides theoretical basis for the selection of starting strains for commercial Douchi production.

Three New Polyoxometalates Derivatives Decorated by Phenanthroline and Transition-metal Cations(M=Zn~ⅡI , Co~Ⅱ , Ni~Ⅱ)

Three new Keggin polyoxometalates, [Zn（phen）3]2[SiW12O40]＇5H2O（1）, [Co（phen）3]2[SiW12O40]（2） and [Ni（phen）3]2[SiW12O40].2H2O（3）（phen=1,10＇-phenanthroline） have been hydrothermally synthesized and characterized by elemental analysis, IR, crystal X-ray diffraction, thermogravimetric analyses（TGA） and fluorescence tech- niques. Complex 1, crystallized in the triclinic space group Pi, consists of one [SiW12O40]4 anion, two discrete [Zn（phen）3]^2＋ cations and five crystal water molecules. Complexes 2 and 3 have the similar configuration to complex 1, but they crystallized in the monoclinic space group C2/c. Variable-temperature magnetic susceptibilities of complexess 2 and 3 reveal antiferromagnetism and ferromagnetism, respectively.

Structural and electronic properties of transition-metal chalcogenides Mo5S4 nanowires

Transition-metal chalcogenide nanowires(TMCN) as a viable candidate for nanoscale applications have been attracting much attention for the last few decades. Starting from the rigid building block of M6 octahedra(M = transition metal),depending on the way of connection between M6 and decoration by chalcogenide atoms, multiple types of extended TMCN nanowires can be constructed based on some basic rules of backbone construction proposed here. Note that the well-known Chevrel-phase based M6X6 and M6X9(X = chalcogenide atom) nanowires, which are among our proposed structures, have been successfully synthesized by experiment and well studied. More interestingly, based on the construction principles, we predict three new structural phases(the cap, edge, and C&E phases) of Mo5S4, one of which(the edge phase) has been obtained by top-down electron beam lithography on two-dimensional MoS2, and the C&E phase is yet to be synthesized but appears more stable than the edge phase. The stability of the new phases of Mo5S4 is further substantiated by crystal orbital overlapping population(COOP), phonon dispersion relation, and thermodynamic calculation. The barrier of the structural transition between different phases of Mo5S4 shows that it is very likely to realize an conversion from the experimentally achieved structure to the most stable C&E phase. The calculated electronic structure shows an interesting band nesting between valence and conduction bands of the C&E Mo5S4 phase, suggesting that such a nanowire structure can be well suitable for optoelectronic sensor applications.

Effect of different drying methods on the amino acids,α-dicarbonyls and volatile compounds of rape bee pollen

The significant demand for high quality food has motivated us to adopt appropriate processing methods to improve the food nutritional quality and flavors.In this study,the effects of five drying methods,namely,pulsed vacuum drying(PVD),freeze drying(FD),infrared drying(IRD),hot-air drying(HAD)and sun drying(SD)on free amino acids(FAAs),α-dicarbonyl compounds(α-DCs)and volatile compounds(VOCs)in rape bee pollen(RBP)were determined.The results showed that FD significantly released the essential amino acids(EAAs)compared with fresh samples while SD caused the highest loss.Glucosone was the dominantα-DCs in RBP and the highest loss was observed after PVD.Aldehydes were the dominant volatiles of RBP and SD samples contained more new volatile substances(especially aldehydes)than the other four drying methods.Comprehensively,FD and PVD would be potential methods to effectively reduce the quality deterioration of RBP in the drying process.

Microstructured hydroxyl environments and Raman spectroscopy in selected basic transition-metal halides

Raman vibrational spectra of the selected basic （hydroxyl OH and deuteroxyl OD） transition-metal halides, geomet- rically frustrated material series α-, β-, γ-Cu2（OH）3Cl, α-Cu2（OH）3Br, β-Ni2（OH）3Cl, β-Co2（OH）3Cl, β-Co2（OH）3Br, γ-Cu2（OD）3Cl, and β-Co2（OD）3Cl are measured at room temperature and analysed to investigate the relationship be- tween the microstructured OH environments and their respective Raman spectra. Among these selected samples, the last two are used to determine the OH stretching vibration region （3600 cm-1-3300 cm-1） and OH bending vibra- tion region （1000 cm-1-600 cm-1） of OH systems in the spectra. Through the comparative analysis of the distances d（metal-O）, d（O-halogen）, and d（OH）, the strong metal-O interaction and trimeric hydrogen bond （Car, C8 or C1 symmetry） are found in every material, but both determine simultaneously an ultimate d（OH）, and therefore an OH stretching vibration frequency. According to the approximately linear relationship between the OH stretching vibration frequency and d（OH）, some unavailable d（OH） are guessed and some doubtful d（OH） are suggested to be corrected. In addition, it is demonstrated in brief that the OH bending vibration frequency is also of importance to check the more detailed crystal microstructure relating to the OH group.