Design of a Transverse-flux Permanent-magnet Linear Generator and Controller for Use with a Free-piston Stirling Engine

Transverse-flux with high efficiency has been applied in Stirling engine and permanent magnet synchronous linear generator system,however it is restricted for large application because of low and complex process.A novel type of cylindrical,non-overlapping,transverse-flux,and permanent-magnet linear motor（TFPLM） is investigated,furthermore,a high power factor and less process complexity structure research is developed.The impact of magnetic leakage factor on power factor is discussed,by using the Finite Element Analysis（FEA） model of stirling engine and TFPLM,an optimization method for electro-magnetic design of TFPLM is proposed based on magnetic leakage factor.The relation between power factor and structure parameter is investigated,and a structure parameter optimization method is proposed taking power factor maximum as a goal.At last,the test bench is founded,starting experimental and generating experimental are performed,and a good agreement of simulation and experimental is achieved.The power factor is improved and the process complexity is decreased.This research provides the instruction to design high-power factor permanent-magnet linear generator.

Torque analysis for double-stator permanent-magnet motor

In addition to the characteristics of a conventional motor, a novel direct-drive double-stator permanent-magnet brushless motor proposed can operate in the state of either a generator or a motor as appropriate. Through numerical calculation and analysis, the output torque of double-stator permanent-magnet brushless motor of the same volume as the traditional machine is discussed, and the reduction of torque ripple by using the structure features of this motor is investigated. The results indicate that lower torque ripple under the condition of ideal effective torque can be obtained by the rational design of motor. The prototype motors tested show that this kind of motor structure has a higher power density.

A New-style Permanent-magnet Motor with Double-stator Structure

A new-style direct drive motor with double-stator structure is proposed. The structure and principle of the permanent-magnet (PM) brushless motor are discussed. On the basis of numerical calculation, the cogging torque waveforms of the prototype motor when staggering two stators are analyzed. The method that can reduce torque ripple making use of the structure features of this motor is investigated. The results of numerical calculation and experiment indicate that designing motor with this kind of structure is a good scheme for increasing the power density.

Design of Axial-Flux Motor for Traction Application

This paper deals with the design of high power – low dimensions axial-flux permanent-magnet motor intended for trac-tion application. First, two motor configurations are analytically designed and compared using finite element calcula-tion. Then, the configuration yielding the best performances is integrated and modelled with the whole traction chain under MATLAB/SIMULINK environment in order to demonstrate the motor operation on a large speed band.

Design to Improve Thrust Force Performance of Dual-side Primary Permanent-magnet Vernier Linear Motor

A novel dual-side primary permanent-magnet vernier linear(DS-PPMVL)motors is proposed.The novelty of the proposed motors is the design of asymmetric consequent poles on the mover,which can effectively enforce the flux-modulation effect and improve the thrust force performance.First,the topologies and operation principle are introduced.Subsequently,the structure relationships between the existing and proposed motors are discussed.Then,a unified analytical model is built.Accordingly,the magnetic field generated by the consequent pole is calculated.Meanwhile,the performance improvement mechanism with the asymmetric consequent pole is analyzed.To improve the efficiency of motor optimization,multi-objective optimization method is adopted to obtain the global optimal solution combination of structure parameters.The proposed motors exhibit higher thrust force,higher force density,less PM consumption,and better overload performance than the existing DS-PPMVL motor.Finally,experiments are conducted based on the existing prototype to verify the accuracy of the design and analysis.

Fundamental Design and Analysis of a Novel Bipolar Transverse-Flux Motor with Stator Permanent-Magnet Excitation

In this paper,a novel bipolar transverse flux motor with stator permanent magnet excitation is proposed based on the summary and analysis of the transverse flux motor and stator permanent magnet motor research achievements in recent years.It has been shown that the motor realizes the bipolar winding flux through the detailed analysis.The motor can be used as an inwheel motor in electric vehicles because of its external rotor and permanent magnets mounted on the stator radial surface.Secondly the basic structure and working principle of the motor are introduced.Then the relationship between the motor power and its dimensions is deduced.Thirdly the 3 dimensional finite element method(3D FEM)is used to analyze the static and transient characteristics,including the no-load magnetic field distribution and winding back EMF.Finally a three-phase 600W prototype has been made and the experimental analysis is carried out.

Rule-based Fault Diagnosis of Hall Sensors and Fault-tolerant Control of PMSM

Hall sensor is widely used for estimating rotor phase of permanent magnet synchronous motor(PMSM). And rotor position is an essential parameter of PMSM control algorithm, hence it is very dangerous if Hall senor faults occur. But there is scarcely any research focusing on fault diagnosis and fault-tolerant control of Hall sensor used in PMSM. From this standpoint, the Hall sensor faults which may occur during the PMSM operating are theoretically analyzed. According to the analysis results, the fault diagnosis algorithm of Hall sensor, which is based on three rules, is proposed to classify the fault phenomena accurately. The rotor phase estimation algorithms, based on one or two Hall sensor(s), are initialized to engender the fault-tolerant control algorithm. The fault diagnosis algorithm can detect 60 Hall fault phenomena in total as well as all detections can be fulfilled in 1/138 rotor rotation period. The fault-tolerant control algorithm can achieve a smooth torque production which means the same control effect as normal control mode (with three Hall sensors). Finally, the PMSM bench test verifies the accuracy and rapidity of fault diagnosis and fault-tolerant control strategies. The fault diagnosis algorithm can detect all Hall sensor faults promptly and fault-tolerant control algorithm allows the PMSM to face failure conditions of one or two Hall sensor(s). In addition, the transitions between health-control and fault-tolerant control conditions are smooth without any additional noise and harshness. Proposed algorithms can deal with the Hall sensor faults of PMSM in real applications, and can be provided to realize the fault diagnosis and fault-tolerant control of PMSM.

Nonlinear Dynamics of Permanent-magnet Synchronous Motor with v/f Control

The nonlinear dynamics of permanent-magnet synchronous motor(PMSM) with v/f control signals is investigated intensively.First,the equilibria and steady-state characteristics of the system are formulated by analytical analysis.Then,some of its basic dynamical properties,such as characteristic eigenvalues,Lyapunov exponents and phase trajectories are studied by varying the values of system parameters.It is found that when the values of the system parameters are smaller,the PMSM operates in stable domains,no matter what the values of control gains are.With the values of parameters increasing,the unstability appears and PMSM falls into chaotic operation.Furthermore,the complex dynamic behaviors are verified by means of simulation.

System construction of a four-side primary permanent-magnet linear motor drive mechanical press

A primary permanent-magnet linear motor (PPMLM) has a robust secondary structure and high force density and is appropriate for direct-drive mechanical press. The structure of a four-side PPMLM drive press is presented based on our previous research. The entire press control system is constructed to realize various flexible forming processes. The control system scheme is determined in accordance with the mathematical model of PPMLM, and active disturbance rejection control is implemented in the servo controller. Field-circuit coupling simulation is applied to estimate the system’s performance. Then, a press prototype with 6 kN nominal force is fabricated, and the hardware platform of the control system is constructed for experimental study. Punch strokes with 0.06 m displacement are implemented at trapezoidal speeds of 0.1 and 0.2 m/s;the dynamic position tracking errors are less than 0.45 and 0.82 mm, respectively. Afterward, continuous reciprocating strokes are performed, and the positioning errors at the bottom dead center are less than 0.015 mm. Complex pulse trajectories are also achieved. The proposed PPMLM drive press exhibits a fast dynamic response and favorable tracking precision and is suitable for various forming processes.

Field-Oriented Control and Direct Torque Control for a Five-Phase Fault-Tolerant Flux-Switching Permanent-Magnet Motor

This paper presents a comparative performance analysis of a new five-phase fault-tolerant flux-switching permanent-magnet(FT-FSPM)motor for high-reliability applications under the two most popular control schemes,namely,field-oriented control(FOC)and direct torque control(DTC)based on stator-flux orientation.Firstly,the new motor topology and structural characteristics are briefly presented.Secondly,the d-and q-axis for the FT-FSPM motor are defined,which is crucial to the mathematical model and control scheme,and the mathematical models are derived.Then,two control schemes,i.e.,FOC and DTC,and the main system are proposed.The operational principles of the two control schemes are presented,and space vector pulse width modulation(SVPWM)based on four neighboring vectors is adopted to reduce current harmonics and torque ripples.Finally,the simulated and experimental results are given,and performance analysis of the two control schemes are compared and discussed.The results reveal that FOC scheme has the sinusoidal phase current and low torque ripples,while the DTC scheme has fast dynamic response,verifying the effectiveness of the two proposed control schemes.This paper is a primary investigation for more possible improvements in the control schemes of the five-phase FS-FTPM motor.

PMSM speed control using adaptive sliding mode control based on an extended state observer

In this study,a composite strategy based on sliding-mode control( SMC) is employed in a permanent-magnet synchronous motor vector control system to improve the system robustness performance against parameter variations and load disturbances. To handle the intrinsic chattering of SMC,an adaptive law and an extended state observer( ESO) are utilized in the speed SMC controller design. The adaptive law is used to estimate the internal parameter variations and compensate for the disturbances caused by model uncertainty. In addition,the ESO is introduced to estimate the load disturbance in real time. The estimated value is used as a feed-forward compensator for the speed adaptive sliding-mode controller to further increase the system's ability to resist disturbances. The proposed composite method,which combines adaptive SMC( ASMC) and ESO,is compared with PI control and ASMC. Both the simulation and experimental results demonstrate that the proposed method alleviates the chattering of SMC systems and improves the dynamic response and robustness of the speed control system against disturbances.

Robustness-tracking control based on sliding mode and H_∞ theory for linear servo system

A robustness-tracking control scheme based on combining H_∞ robust control and sliding mode control is proposed for a direct drive AC permanent-magnet linear motor servo system to solve the conflict between tracking and robustness of the linear servo system. The sliding mode tracking controller is designed to ensure the system has a fast tracking characteristic to the command, and the H_∞ robustness controller suppresses the disturbances well within the close loop(including the load and the end effect force of linear motor etc.) and effectively minimizes the chattering of sliding mode control which influences the steady state performance of the system. Simulation results show that this control scheme enhances the track-command-ability and the robustness of the linear servo system, and in addition, it has a strong robustness to parameter variations and resistance disturbances.

Optimization design of an interior permanent-magnet synchronous machine for a hybrid hydraulic excavator

A hybrid power transmission system （HPTS） is a promising way to save energy in a hydraulic excavator and the electric machine is one of the key components of the system. In this paper, a design process for permanent-magnet synchronous machines （PMSMs） in a hybrid hydraulic excavator （HHE） is presented based on the analysis of the working conditions and requirements of an HHE. A parameterized design approach, which combines the analytical model and the 2D finite element method （FEM）, is applied to the electric machine to improve the design efficiency and accuracy. The analytical model is employed to optimize the electric machine efficiency and obtain the statordimension and flux density distribution. The rotor is designed with the FEM to satisfy the flux requirements obtained in stator design. The rotor configuration of the PMSM employs an interior magnet structure, thus resulting in some inverse saliency, which allows for much higher values in magnetic flux density. To reduce the rotor leakage, a disconnected type silicon steel block structure is adopted. To improve the air gap flux density distribution, the trapezoid permanent magnet （PM） and centrifugal rotor structure are applied to PMSM. Demagnetization and armature reactions are also taken into consideration and calculated by the FEM. A prototype of the newly designed electric machine has been fabri- cated and tested on the experimental platform. The analytical design results are validated by measurements.

A control scheme with performance prediction for a PV fed water pumping system

This paper focuses on modeling and perfor- mance predetermination of a photovoltaic （PV） system with a boost converter fed permanent magnet direct current （PMDC） motor-centrifugal pump load, taking the con- verter losses into account. Sizing is done based on the maximum power generated by the PV array at the average irradiation. Hence optimum sizing of the PV array for the given irradiation at the geographical location of interest is obtained using the predetermined values. The analysis presented here involves systems employing maximum power point tracking （MPPT） as they are more efficient than directly coupled systems. However, the voltage and power of the motor might rise above rated values for irradiations greater than the average when employing MPPT, hence a control scheme has been proposed to protect the PMDC motor from being damaged during these conditions. This control scheme appropriately chooses the optimum operating point of the system, ensuring long-term sustained operation. The numerical simulation of the system is performed in Matlab/Simulink and is validated with experimental results obtained from a 180 V, 0.5 hp PMDC motor coupled to a centrifugal pump. The operation of the system with the proposed control scheme is verified by varying the irradiation levels and the relevant results are presented.