A novel slotted helix slow-wave structure for high power Ka-band traveling-wave tubes

A novel slotted helix slow-wave structure （SWS） is proposed to develop a high power, wide-bandwidth, and high reliability millimeter-wave traveling-wave tube （TWT）. This novel structure, which has higher heat capacity than a conven- tional helix SWS, evolves from conventional helix SWS with three parallel rows of rectangular slots made in the outside of the helix tape. In this paper, the electromagnetic characteristics and the beam-wave interaction of this novel structure operating in the Ka-band are investigated. From our calculations, when the designed beam voltage and beam current are set to be 18.45 kV and 0.2 A, respectively, this novel circuit can produce over 700-W average output power in a frequency range from 27.5 GHz to 32.5 GHz, and the corresponding conversion efficiency values vary from 19% to 21.3%, and the maximum output power is 787 W at 30 GHz.

Ultra-wideband low radar cross-section metasurface and its application on waveguide slot antenna array

A novel approach devoted to achieving ultra-wideband radar cross section reduction（RCSR） of a waveguide slot antenna array（WGSAA） while maintaining its radiation performance is proposed. Three kinds of artificial magnetic conductors（AMCs） tiles consisting of three types of basic units resonant at different frequencies are designed and arranged in a novel quadruple-triangle-type configuration to create a composite planar metasurface. The proposed metasurface is characterized by low radar feature over an ultra-wideband based on the principle of phase cancellation. Both simulated and measured results demonstrate that after the composite metasurface is used to cover part of the antenna array, an ultrawideband RCSR involving in-band and out-of-band is achieved for co-and cross-polarized incident waves based on energy cancellation, while the radiation performance is well retained. The proposed method is simple, low-cost, and easy-tofabricate, providing a new method for ultra-wideband RCSR of an antenna array. Moreover, the method proposed in this paper can easily be applied to other antenna architectures.

On the Design of Plus Slotted Fractal Antenna Array

A new technique which is a combination of fractal antenna and array antenna is presented to design Plus Slotted Fractal Antenna Array (PSFAA) in this paper. PSFAA with corporate feed operates at 2.5 GHz frequency. PSFAA is designed on FR4 substrate material with permittivity 4.4 and height 1.6 mm. PSFAA is designed up to 2nd iteration. High Frequency Structure Simulator (HFSS) software is used for simulation of PSFAA. The proposed antenna array operates at three bands with five frequencies 2.5 GHz, 4.1 GHz, 6.9 GHz, 7.4 GHz and 8.2 GHz. Simulated Return losses results of proposed PSFAA are -22.15 dB, -19.44 dB, -25.21 dB, -10 dB, -12.45 dB at above frequencies respectively. It has a gain of 9.22 dB at resonant frequency 2.5 GHz whereas conventional antenna array has a gain of 5.15 dB at resonant frequency 2.5 GHz. Return losses and gain of PSFAA also improved from conventional antenna array at various resonant frequencies.

Analysis and Deskgn of Radiated Element and Array for a Radial Line Slot Antenna

The double layered Radial Line Slot Antenna (RLSA) is a new type of antenna for Ku band Direct Broadcasting Satellite (DBS) reception. This paper presents the structure, aperture field distribution, gain and efficiency of the antenna, discusses parameters of slot pair structure and influences of aperture field distribution and suggests calculation of parameters of the slot pairs and the array structure and CAD design procedures.

Presentation of Design Equations for Array of Circumferential Slot on Cylindrical Waveguide

In this paper the design equations for an array of circumferential slots on a cylindrical waveguide are obtained, following the procedure introduced by Elliott for slots on rectangular waveguides. The minimization of the error function is achieved for optimization of slot array parameters. The optimization of slot parameters is not goal of this paper but a numerical example are presented as illustrations of the proposed synthesis method. The results of array designs by the method of the least squares are verified by two computer simulation softwares, namely CST and HFSS.

Substrate Integrated Waveguide Based Monopulse Slot Antenna Arrays for 60 GHz Applications

Monopulse slot antenna arrays based on substrate integrated waveguide （SIW） are proposed for the application of 60 GHz mono- pulse tracking systems in this paper. The sum-difference monopulse comparator can provide a high amplitude and phase balance over wide frequency band and no phase delay technique is required for the difference channel. Resonant slot antennas are adopted as the radiating elements since they can be integrated with the sum-difference monopulse comparator in a single layer with a compact size. Two monopulse arrays with 2× 4 and 4×4 slot elements are designed, fabricated, and measured. Measured results show that the proposed antenna arrays have wide bandwidth covering the unlicensed 60-GHz band. The peak sum beam gain is 13.85 dBi for the 2 ×4 element array and 16.24 dBi for the 4×4 element array. The peak difference beam gain is 11.20 dBi for the 2×4 element array and 12.11 dBi for the 4×4 element array and the maximum null depth can reach -40 dB.

Loss Analysis of Magnetic Gear with Slotted in Magnetic Modulation Ring

In order to improve the operation efficiency of coaxial magnetic gear(CMG),in this paper,a CMG model with slotted in magnetic modulation ring is proposed.In this model,the permanent magnets(PMs)of internal and external rotors are distributed in Halbach array,the inner rotor PMs are equally divided into 3 small pieces,and the outer rotor PMs are equally divided into 2 small pieces.At the same time,the static magnetic modulation ring iron blocks are slotted,each iron block has 3 slots,the width of the slot is 0.4°,and the depth of the single side slot is 1mm.Finally,a two-dimensional model is established,and the eddy current loss and iron loss of the model are optimized,compared with the conventional CMG model,it is found that the changed pattern can increase the internal and external output torque by 4%and 4.12%,respectively.The eddy current loss is reduced by 66.57%,and the iron loss is reduced by 8.9%,which significantly improve the operation efficiency of the CMG.

Triple broadband compact planar inverted F antenna for WLAN and WiMAX

This article proposes a novel antenna structure by slot loading method based on the planar inverted F antenna （PIFA）, which is fed by coaxial probe. The antenna structure consists of a new and flexible slot array including five slots. To reveal the mechanism of slot loading in creating new and broad frequency band, the article discusses the performance of the five slots in detail. Simulations with Ansoft HFSS 10.0 indicate that the - 10 dB relative impedance bandwidth can reach 17.2%, 8.9% and 12.1% that covers 2.40/3.30/5.15/5.725 GHz wireless local area network （WLAN） and world interoperability for microwave access （WiMAX） bands. Meanwhile, the antenna has stable radiation pattern, high gain and low profile. Especially, the slot array is flexible and capable of being realized in various application cases. Actually the design reaches broadband, multi-band, miniaturization, high gain and is easy to fabricate.