Traveling Wave Tubes(TWTs) are widely used in the radar and communications system as RF power amplifiers. A highly sophisticated power supply is required by TWT. In order to meet the severe requirements of Traveling W...Traveling Wave Tubes(TWTs) are widely used in the radar and communications system as RF power amplifiers. A highly sophisticated power supply is required by TWT. In order to meet the severe requirements of Traveling Wave Tube Amplifier(TWTA), a novel two-stage topology high voltage converter for TWTA is proposed.The converter is based on Zero-Voltage Switching and Zero-Current Switching(ZVS/ZCS) resonant techniques. The high voltage converter operation principles are investigated and major features of the converter are discussed. The power switching mode of ZVS/ZCS is obtained. The experimental results show that the converter has good soft switching characteristics. Compared to the conventional hard switched Pulse Width Modulation(PWM) techniques, the high efficiency and low ripple of the converter for TWTA are realized. The efficiency of High Voltage Electronic Power Conditioners(HV-EPC) over 93.5% under the condition of 38~46 V input voltage and 260~300 W input power. The switching frequency of first-stage(preregulator) of HV-EPC is 89 k Hz and the switching frequency of second-stage(postregulator) is 44.5 k Hz. The highest output voltage of the HV-EPC is helix voltage which is about –6.8 kV. It is especially suitable for TWTA utilized in space satellite applications due to its high switching frequency and high power density.展开更多
Thermoacoustically-driven pulse tube cooler can provide cryogenic cooling power with no moving com-ponents. Up to now, pulse tube cooler is directly coupled with the thermoacoustic engine and obtainable pressure ratio...Thermoacoustically-driven pulse tube cooler can provide cryogenic cooling power with no moving com-ponents. Up to now, pulse tube cooler is directly coupled with the thermoacoustic engine and obtainable pressure ratio for the pulse tube cooler is limited by the capability of the ther-moacoustic engine. The authors propose here the concept of acoustic amplifier, which is actually a long tube connecting the engine with the pulse tube cooler. Theoretical calculation shows that suitable length and diameter of the tube can lead to a pressure wave amplification effect which means that pressure wave amplitude coming from the thermoacoustic engine can be much amplified to drive the pulse tube cooler. Based on this, a 2.8 m long copper tube with 8 mm inner diameter is used as the acoustic amplifier in experiments. The experimental results show that due to the amplification effect, pressure wave amplitude at the inlet of the pulse tube cooler is over 2.5 times of that at the engine outlet. Typically, with 1.67 kW heating power, the pressure ratio provided by the engine is 1.11 while at the inlet of the pulse tube cooler the pressure ratio is 1.32, which leads to a lowest no-load temperature of 65.7 K.展开更多
射频预失真是提高功率放大器线性度的一种有效手段,精确补偿放大器的非线性失真需保证幅度和相位补偿同时满足要求.针对Ka波段行波管放大器的线性化,提出一种新型射频预失真电路.该电路由前置、后置电平调节模块和基于矢量合成技术的非...射频预失真是提高功率放大器线性度的一种有效手段,精确补偿放大器的非线性失真需保证幅度和相位补偿同时满足要求.针对Ka波段行波管放大器的线性化,提出一种新型射频预失真电路.该电路由前置、后置电平调节模块和基于矢量合成技术的非线性信号产生模块构成.改变两电平调节模块的增益,可实现补偿区间的调节;改变非线性信号产生模块中两支路的偏置电压,可实现预失真补偿量调节及幅度/相位的独立调节.将实际电路与配用Ka行波管联测,在输出功率回退6 d B时,行波管三阶互调系数提高约11.5 d Bc.展开更多
文摘Traveling Wave Tubes(TWTs) are widely used in the radar and communications system as RF power amplifiers. A highly sophisticated power supply is required by TWT. In order to meet the severe requirements of Traveling Wave Tube Amplifier(TWTA), a novel two-stage topology high voltage converter for TWTA is proposed.The converter is based on Zero-Voltage Switching and Zero-Current Switching(ZVS/ZCS) resonant techniques. The high voltage converter operation principles are investigated and major features of the converter are discussed. The power switching mode of ZVS/ZCS is obtained. The experimental results show that the converter has good soft switching characteristics. Compared to the conventional hard switched Pulse Width Modulation(PWM) techniques, the high efficiency and low ripple of the converter for TWTA are realized. The efficiency of High Voltage Electronic Power Conditioners(HV-EPC) over 93.5% under the condition of 38~46 V input voltage and 260~300 W input power. The switching frequency of first-stage(preregulator) of HV-EPC is 89 k Hz and the switching frequency of second-stage(postregulator) is 44.5 k Hz. The highest output voltage of the HV-EPC is helix voltage which is about –6.8 kV. It is especially suitable for TWTA utilized in space satellite applications due to its high switching frequency and high power density.
基金supported by the Chinese Academy of Sciences(Project Number:KJCX2-SW-W12-l).
文摘Thermoacoustically-driven pulse tube cooler can provide cryogenic cooling power with no moving com-ponents. Up to now, pulse tube cooler is directly coupled with the thermoacoustic engine and obtainable pressure ratio for the pulse tube cooler is limited by the capability of the ther-moacoustic engine. The authors propose here the concept of acoustic amplifier, which is actually a long tube connecting the engine with the pulse tube cooler. Theoretical calculation shows that suitable length and diameter of the tube can lead to a pressure wave amplification effect which means that pressure wave amplitude coming from the thermoacoustic engine can be much amplified to drive the pulse tube cooler. Based on this, a 2.8 m long copper tube with 8 mm inner diameter is used as the acoustic amplifier in experiments. The experimental results show that due to the amplification effect, pressure wave amplitude at the inlet of the pulse tube cooler is over 2.5 times of that at the engine outlet. Typically, with 1.67 kW heating power, the pressure ratio provided by the engine is 1.11 while at the inlet of the pulse tube cooler the pressure ratio is 1.32, which leads to a lowest no-load temperature of 65.7 K.
文摘射频预失真是提高功率放大器线性度的一种有效手段,精确补偿放大器的非线性失真需保证幅度和相位补偿同时满足要求.针对Ka波段行波管放大器的线性化,提出一种新型射频预失真电路.该电路由前置、后置电平调节模块和基于矢量合成技术的非线性信号产生模块构成.改变两电平调节模块的增益,可实现补偿区间的调节;改变非线性信号产生模块中两支路的偏置电压,可实现预失真补偿量调节及幅度/相位的独立调节.将实际电路与配用Ka行波管联测,在输出功率回退6 d B时,行波管三阶互调系数提高约11.5 d Bc.
