Candidiasis, also known as candidiasis vulvovaginitis, is an infection caused by different types of Candida fungi, the most frequent being Candida albicans. The present study reports an effective strategy, which opens...Candidiasis, also known as candidiasis vulvovaginitis, is an infection caused by different types of Candida fungi, the most frequent being Candida albicans. The present study reports an effective strategy, which opens new avenues for the treatment of this public health problem. The MAC<sup>®</sup> Methodology, conventional laser light-emitting (LLLT)/LED) methods are based on the biphasic response demonstrated many times in LLLT research and as with other forms of drugs, a “drug” (irradiation parameters) and a “dose” (irradiation times) and the “Arndt-Schulz Law” is often cited as a suitable model to describe the dose-dependent effects of LLLT. This method uses photopharmaceuticals, cell markers and the use of correct parameters for each case to induce the acceleration of tissue repair. The present study shows a case of a 32-year-old patient diagnosed with recurrent candidiasis 4 years ago. Eighteen sessions were performed (every other day) using a photoactivated component (Methylene blue 1% + Clotrimazole 1%) and LED phototherapy (red, blue and violet) with emission times of 60 - 260 seconds for each applicator, according to the dose recommendations of the scar acceleration method (MAC<sup>®</sup>). At the sixth treatment session there was a noticeable decrease in the itching sensation reported by the patient. In session 11 she reported feeling a great improvement, indicating that she no longer felt itching in any area after 18 sessions. The present case demonstrates new methodologies to treat common problems in the population that have a positive impact on the quality of life. This methodology has a promising future because it is non-invasive and requires a great biological transformation for inflammatory, fungal and viral control.展开更多
Food safety problems caused by excessive nitrite addition have been frequently reported and the detection of nitrite in food is particularly important. The standing time during the pretreatment of primary sample has a...Food safety problems caused by excessive nitrite addition have been frequently reported and the detection of nitrite in food is particularly important. The standing time during the pretreatment of primary sample has a great influence on the concentration of nitrite tested by spectrophotometric method. In this context, three kinds of food samples are prepared, including canned mustard, canned fish and home-made pickled water. A series of standing times are placed during the sample pretreatments and the corresponding nitrite contents in these samples are detected by spectrophotometric method based on N-ethylenediamine dihydrochloride. This study aims to find out a reasonable standing time during the pretreatment of food sample, providing influence factor for precise detection of nitrite.展开更多
Ultrasonic treatment has great contributions on modifying the morphology,dimension and distribution of constituent phases during solidification,which serve as dominate factors influencing the hydrogen storage performa...Ultrasonic treatment has great contributions on modifying the morphology,dimension and distribution of constituent phases during solidification,which serve as dominate factors influencing the hydrogen storage performance of Mg-based alloys.In this research,ultrasonic treatment is utilized as a novel method to enhance the de-/hydriding properties of Mg-2Ni(at.%)alloy.Due to ultrasonic treatment,the microstructure of as-cast alloy is significantly refined and homogenized.Ascribing to the increased eutectic boundaries and shortened distance insideα-Mg for hydrogen atoms diffusion,the hydrogen uptake capacities and isothermal de-/hydriding rates improve effectively,especially at lower temperature.The peak desorption temperature reduces from 392.99°C to 345.56°C,and the dehydriding activation energy decreases from 101.93 k J mol^(-1)to 88.65 k J mol^(-1).Weakened hysteresis of plateau pressures and slightly optimized thermodynamics are determined from the pressure-composition isotherms.Owing to the refined primary Mg,a larger amount of hydrogen with the higher hydriding proportion is absorbed in the first stage when hydrides nucleate in eutectic region and grow on primary Mg periphery subsequently before MgH2colonies impinging,resulting in the enhancement of hydrogenation rates and capacities.展开更多
Based on the latest classification by the International Society for the Study of Vascular Anomalies in 2018,vascular malformations(VMs)can be categorized into simple,combined,VMs of major named vessels,and VMs associa...Based on the latest classification by the International Society for the Study of Vascular Anomalies in 2018,vascular malformations(VMs)can be categorized into simple,combined,VMs of major named vessels,and VMs associated with other anomalies.Simple VMs include lymphatic,venous,capillary,and arteriovenous malformations(AVMs).AVMs represent disorders of direct arteriovenous shunts caused by the absence of a capillary bed between the involved arteries and veins.This abnormal vascular communication causes arterial blood to accumulate in the venous vessels,thus resulting in venous hypertension and characteristic clinical manifestations,such as pulsation,tremors,and elevated temperature.AVMs can occur sporadically or as manifestations of syndromic lesions and are considered among the most complex and challenging VMs.The diagnosis and treatment of AVMs can vary depending on the lesion location and associated clinical symptoms,thus complicating their management.Herein,we discuss peripheral AVMs in terms of their clinical manifestations,imaging examinations,and staging systems to provide a comprehensive reference for the treatment,evaluation methods,and follow-up procedures for this vascular anomaly.展开更多
Finding out the desired drug combinations is a challenging task because of the number of different combinations that exist and the adversarial effects that may arise. In this work, we generate drug combinations over m...Finding out the desired drug combinations is a challenging task because of the number of different combinations that exist and the adversarial effects that may arise. In this work, we generate drug combinations over multiple stages using distance calculation metrics from supervised learning, clustering, and a statistical similarity calculation metric for deriving the optimal treatment sequences. The combination generation happens for each patient based on the characteristics (features) observed during each stage of treatment. Our approach considers not the drug-to-drug (one-to-one) effect, but rather the effect of group of drugs with another group of drugs. We evaluate the combinations using an FNN model and identify future improvement directions.展开更多
The technology of drilling tests makes it possible to obtain the strength parameter of rock accurately in situ. In this paper, a new rock cutting analysis model that considers the influence of the rock crushing zone(R...The technology of drilling tests makes it possible to obtain the strength parameter of rock accurately in situ. In this paper, a new rock cutting analysis model that considers the influence of the rock crushing zone(RCZ) is built. The formula for an ultimate cutting force is established based on the limit equilibrium principle. The relationship between digital drilling parameters(DDP) and the c-φ parameter(DDP-cφ formula, where c refers to the cohesion and φ refers to the internal friction angle) is derived, and the response of drilling parameters and cutting ratio to the strength parameters is analyzed. The drillingbased measuring method for the c-φ parameter of rock is constructed. The laboratory verification test is then completed, and the difference in results between the drilling test and the compression test is less than 6%. On this basis, in-situ rock drilling tests in a traffic tunnel and a coal mine roadway are carried out, and the strength parameters of the surrounding rock are effectively tested. The average difference ratio of the results is less than 11%, which verifies the effectiveness of the proposed method for obtaining the strength parameters based on digital drilling. This study provides methodological support for field testing of rock strength parameters.展开更多
Clubfoot malformation is the most common serious congenital anomaly affecting the foot in children. Its treatment by the Ponseti method is simple, profitable and widely used in the world. Objective: The objective of t...Clubfoot malformation is the most common serious congenital anomaly affecting the foot in children. Its treatment by the Ponseti method is simple, profitable and widely used in the world. Objective: The objective of this study was to identify the factors of the failure of its treatment by the Ponseti method. Material and Method: We carried out a retrospective and descriptive study of cases of congenital equinus clubfoot varus at the Reference Health Care Center of Commune III of Bamako over 26 months from September 2020 to November 2022. Data were treated with the utmost anonymity. Result: This study was performed on 44 children seen for clubfoot: male (68%) and female (32%), with a sex ratio of 2.1. We obtained 13 cases of recidivism including 7 boys and 6 girls. We found 21 cases of unilateral and 23 bilateral;among which 9 recurrences were found against 4 in the unilateral forms. 85% of recurrences did not have good adherence to the splint and 62% did not come regularly for follow-up consultation. We obtained 33 children with idiopathic clubfeet (75%) with a recurrence of 24%, and 7 children with secondary clubfeet with 71 % recurrence. There was no recurrence in the postural type. Among the recurrences, 38.5% started treatment between 1 and 6 months, 23.1% from 0 to 1 month and 15.4% at 2 years and more. 85% of recurrences had a Pirani score between 4.5 to 6 at the start of treatment and 15% at a score of 2.5 to 4. Conclusion: The factors of the failure of the Ponseti method are mainly non-compliance with treatment, secondary clubfeet, and a high Pirani score at the start of treatment.展开更多
In this study,the structural characters,antioxidant activities and bile acid-binding ability of sea buckthorn polysaccharides(HRPs)obtained by the commonly used hot water(HRP-W),pressurized hot water(HRP-H),ultrasonic...In this study,the structural characters,antioxidant activities and bile acid-binding ability of sea buckthorn polysaccharides(HRPs)obtained by the commonly used hot water(HRP-W),pressurized hot water(HRP-H),ultrasonic(HRP-U),acid(HRP-C)and alkali(HRP-A)assisted extraction methods were investigated.The results demonstrated that extraction methods had significant effects on extraction yield,monosaccharide composition,molecular weight,particle size,triple-helical structure,and surface morphology of HRPs except for the major linkage bands.Thermogravimetric analysis showed that HRP-U with filamentous reticular microstructure exhibited better thermal stability.The HRP-A with the lowest molecular weight and highest arabinose content possessed the best antioxidant activities.Moreover,the rheological analysis indicated that HRPs with higher galacturonic acid content and molecular weight showed higher viscosity and stronger crosslinking network(HRP-C,HRP-W and HRP-U),which exhibited stronger bile acid binding capacity.The present findings provide scientific evidence in the preparation technology of sea buckthorn polysaccharides with good antioxidant and bile acid binding capacity which are related to the structure affected by the extraction methods.展开更多
The present letter to the editor is related to the review with the title“Past,present,and future of long-term treatment for hepatitis B virus.”Chronic hepatitis B(CHB)represents an important and pressing public heal...The present letter to the editor is related to the review with the title“Past,present,and future of long-term treatment for hepatitis B virus.”Chronic hepatitis B(CHB)represents an important and pressing public health concern.Timely identification and effective antiviral therapy hold the potential to reduce liver-related mortality attributable to chronic infection with hepatitis B virus(HBV)substantially.However,the current global treatment rates for CHB remain conspicuously low,with the excessively stringent treatment criteria advocated by national CHB guidelines being a contributing factor to these low rates.Nevertheless,recent strides in comprehending this malady and the emergence of novel antiviral agents prompt the imperative re-evaluation of treatment standards to extend the sphere of potential beneficiaries.An impending need arises for a novel paradigm for the classification of patients with CHB,the expansion of antiviral treatment eligibility for HBV-infected individuals,and even the streamlining of the diagnostic process for CHB to amplify cost-effectiveness and augment survival prospects.展开更多
Porous materials present significant advantages for absorbing radioactive isotopes in nuclear waste streams.To improve absorption efficiency in nuclear waste treatment,a thorough understanding of the diffusion-advecti...Porous materials present significant advantages for absorbing radioactive isotopes in nuclear waste streams.To improve absorption efficiency in nuclear waste treatment,a thorough understanding of the diffusion-advection process within porous structures is essential for material design.In this study,we present advancements in the volumetric lattice Boltzmann method(VLBM)for modeling and simulating pore-scale diffusion-advection of radioactive isotopes within geopolymer porous structures.These structures are created using the phase field method(PFM)to precisely control pore architectures.In our VLBM approach,we introduce a concentration field of an isotope seamlessly coupled with the velocity field and solve it by the time evolution of its particle population function.To address the computational intensity inherent in the coupled lattice Boltzmann equations for velocity and concentration fields,we implement graphics processing unit(GPU)parallelization.Validation of the developed model involves examining the flow and diffusion fields in porous structures.Remarkably,good agreement is observed for both the velocity field from VLBM and multiphysics object-oriented simulation environment(MOOSE),and the concentration field from VLBM and the finite difference method(FDM).Furthermore,we investigate the effects of background flow,species diffusivity,and porosity on the diffusion-advection behavior by varying the background flow velocity,diffusion coefficient,and pore volume fraction,respectively.Notably,all three parameters exert an influence on the diffusion-advection process.Increased background flow and diffusivity markedly accelerate the process due to increased advection intensity and enhanced diffusion capability,respectively.Conversely,increasing the porosity has a less significant effect,causing a slight slowdown of the diffusion-advection process due to the expanded pore volume.This comprehensive parametric study provides valuable insights into the kinetics of isotope uptake in porous structures,facilitating the development of porous materials for nuclear waste treatment applications.展开更多
Additive manufacturing(AM)is a free-form technology that shows great potential in the integrated creation of three-dimensional(3D)electronics.However,the fabrication of 3D conformal circuits that fulfill the requireme...Additive manufacturing(AM)is a free-form technology that shows great potential in the integrated creation of three-dimensional(3D)electronics.However,the fabrication of 3D conformal circuits that fulfill the requirements of high service temperature,high conductivity and high resolution remains a challenge.In this paper,a hybrid AM method combining the fused deposition modeling(FDM)and hydrophobic treatment assisted laser activation metallization(LAM)was proposed for manufacturing the polyetheretherketone(PEEK)-based 3D electronics,by which the conformal copper patterns were deposited on the 3D-printed PEEK parts,and the adhesion between them reached the 5B high level.Moreover,the 3D components could support the thermal cycling test from-55℃ to 125℃ for more than 100 cycles.Particularly,the application of a hydrophobic coating on the FDM-printed PEEK before LAM can promote an ideal catalytic selectivity on its surface,not affected by the inevitable printing borders and pores in the FDM-printed parts,then making the resolution of the electroless plated copper lines improved significantly.In consequence,Cu lines with width and spacing of only60μm and 100μm were obtained on both as-printed and after-polished PEEK substrates.Finally,the potential of this technique to fabricate 3D conformal electronics was demonstrated.展开更多
BACKGROUND Congenital duodenal webs are rare in adults and can lead to various symptoms such as nausea,vomiting,and postprandial fullness.The treatment for this disease is mostly surgical.Endoscopic treatment techniqu...BACKGROUND Congenital duodenal webs are rare in adults and can lead to various symptoms such as nausea,vomiting,and postprandial fullness.The treatment for this disease is mostly surgical.Endoscopic treatment techniques have been developed and attempted for this disease.Endoscopic radial incision and cutting(RIC)techniques are reportedly very effective in benign anastomotic stricture.This case report highlights the effectiveness and safety of endoscopic RIC as a minimally invasive treatment for adult congenital duodenal webs.CASE SUMMARY A 23-year-old female patient with indigestion was referred to a tertiary hospital.The patient complained of postprandial fullness in the epigastric region.Previous physical examinations or blood tests indicated no abnormalities.Computed tomography revealed an eccentric broad-based delayed-enhancing mass-like lesion in the second portion of the duodenum.Endoscopy showed an enlarged gastric cavity and a significantly dilated duodenal bulb;a very small hole was observed in the distal part of the second portion,and scope passage was not possible.Gastrografin upper gastrointestinal series was performed,revealing an intraduodenal barium contrast-filled sac with a curvilinear narrow radiolucent rim,a typical"windsock"sign.Endoscopic RIC was performed on the duodenal web.The patient recovered uneventfully.Follow-up endoscopy showed a patent duodenal lumen without any residual stenosis.The patient reported complete resolution of symptoms at the 18-month follow-up.CONCLUSION Endoscopic RIC may be an effective treatment for congenital duodenal webs in adults.展开更多
Intensity-modulated particle therapy(IMPT)with carbon ions is comparatively susceptible to various uncertainties caused by breathing motion,including range,setup,and target positioning uncertainties.To determine relat...Intensity-modulated particle therapy(IMPT)with carbon ions is comparatively susceptible to various uncertainties caused by breathing motion,including range,setup,and target positioning uncertainties.To determine relative biological effectiveness-weighted dose(RWD)distributions that are resilient to these uncertainties,the reference phase-based four-dimensional(4D)robust optimization(RP-4DRO)and each phase-based 4D robust optimization(EP-4DRO)method in carbon-ion IMPT treatment planning were evaluated and compared.Based on RWD distributions,4DRO methods were compared with 4D conventional optimization using planning target volume(PTV)margins(PTV-based optimization)to assess the effectiveness of the robust optimization methods.Carbon-ion IMPT treatment planning was conducted in a cohort of five lung cancer patients.The results indicated that the EP-4DRO method provided better robustness(P=0.080)and improved plan quality(P=0.225)for the clinical target volume(CTV)in the individual respiratory phase when compared with the PTV-based optimization.Compared with the PTV-based optimization,the RP-4DRO method ensured the robustness(P=0.022)of the dose distributions in the reference breathing phase,albeit with a slight sacrifice of the target coverage(P=0.450).Both 4DRO methods successfully maintained the doses delivered to the organs at risk(OARs)below tolerable levels,which were lower than the doses in the PTV-based optimization(P<0.05).Furthermore,the RP-4DRO method exhibited significantly superior performance when compared with the EP-4DRO method in enhancing overall OAR sparing in either the individual respiratory phase or reference respiratory phase(P<0.05).In general,both 4DRO methods outperformed the PTV-based optimization in terms of OAR sparing and robustness.展开更多
Fixed-point fast sweeping WENO methods are a class of efficient high-order numerical methods to solve steady-state solutions of hyperbolic partial differential equations(PDEs).The Gauss-Seidel iterations and alternati...Fixed-point fast sweeping WENO methods are a class of efficient high-order numerical methods to solve steady-state solutions of hyperbolic partial differential equations(PDEs).The Gauss-Seidel iterations and alternating sweeping strategy are used to cover characteristics of hyperbolic PDEs in each sweeping order to achieve fast convergence rate to steady-state solutions.A nice property of fixed-point fast sweeping WENO methods which distinguishes them from other fast sweeping methods is that they are explicit and do not require inverse operation of nonlinear local systems.Hence,they are easy to be applied to a general hyperbolic system.To deal with the difficulties associated with numerical boundary treatment when high-order finite difference methods on a Cartesian mesh are used to solve hyperbolic PDEs on complex domains,inverse Lax-Wendroff(ILW)procedures were developed as a very effective approach in the literature.In this paper,we combine a fifthorder fixed-point fast sweeping WENO method with an ILW procedure to solve steadystate solution of hyperbolic conservation laws on complex computing regions.Numerical experiments are performed to test the method in solving various problems including the cases with the physical boundary not aligned with the grids.Numerical results show highorder accuracy and good performance of the method.Furthermore,the method is compared with the popular third-order total variation diminishing Runge-Kutta(TVD-RK3)time-marching method for steady-state computations.Numerical examples show that for most of examples,the fixed-point fast sweeping method saves more than half CPU time costs than TVD-RK3 to converge to steady-state solutions.展开更多
This research explores strategies to enhance the efficiency of secondary treatment in Vertical Flow Constructed Wetlands (CW) in Montenegro. The focus is on selecting appropriate primary treatment methods alongside th...This research explores strategies to enhance the efficiency of secondary treatment in Vertical Flow Constructed Wetlands (CW) in Montenegro. The focus is on selecting appropriate primary treatment methods alongside three distinct substrate types to improve wastewater treatment efficacy. The study examines the combination of two primary treatments with different substrate types in constructed wetlands (CW1, CW2, and CW3). The primary treatments include the existing wastewater treatment plant (WWTP) in Podgorica, involving coarse material removal through screens, inert material separation in aerated sand traps, and sediment and suspended matter removal in primary sedimentation tanks. The Extreme Separator (ExSep) was employed to evaluate its efficacy as a primary treatment method. The research demonstrates that the efficiency of CW can be significantly enhanced by selecting suitable primary treatment methods and substrates in Podgorica’s conditions. The most promising results were achieved by combining ExSep as a primary treatment with secondary treatment in CW-3. The removal efficiencies after CW3 for COD, BOD, and TSS exceeded 89%, 93%, and 91%, respectively. The outcomes underscore the significance of primary treatment in mitigating pollutant loads before discharge into the constructed wetlands, emphasizing potential areas for further optimization in wastewater treatment practices to enhance environmental sustainability and water quality management.展开更多
Background: The robustness is a measurement of an analytical chemical method and its ability to contain unaffected by little with deliberate variation of analytical chemical method parameters. The analytical chemical ...Background: The robustness is a measurement of an analytical chemical method and its ability to contain unaffected by little with deliberate variation of analytical chemical method parameters. The analytical chemical method variation parameters are based on pH variability of buffer solution of mobile phase, organic ratio composition changes, stationary phase (column) manufacture, brand name and lot number variation;flow rate variation and temperature variation of chromatographic system. The analytical chemical method for assay of Atropine Sulfate conducted for robustness evaluation. The typical variation considered for mobile phase organic ratio change, change of pH, change of temperature, change of flow rate, change of column etc. Purpose: The aim of this study is to develop a cost effective, short run time and robust analytical chemical method for the assay quantification of Atropine in Pharmaceutical Ophthalmic Solution. This will help to make analytical decisions quickly for research and development scientists as well as will help with quality control product release for patient consumption. This analytical method will help to meet the market demand through quick quality control test of Atropine Ophthalmic Solution and it is very easy for maintaining (GDP) good documentation practices within the shortest period of time. Method: HPLC method has been selected for developing superior method to Compendial method. Both the compendial HPLC method and developed HPLC method was run into the same HPLC system to prove the superiority of developed method. Sensitivity, precision, reproducibility, accuracy parameters were considered for superiority of method. Mobile phase ratio change, pH of buffer solution, change of stationary phase temperature, change of flow rate and change of column were taken into consideration for robustness study of the developed method. Results: The limit of quantitation (LOQ) of developed method was much low than the compendial method. The % RSD for the six sample assay of developed method was 0.4% where the % RSD of the compendial method was 1.2%. The reproducibility between two analysts was 100.4% for developed method on the contrary the compendial method was 98.4%.展开更多
Irritable bowel syndrome(IBS-D)with diarrhea is a common gastrointestinal functional disease in clinical practice,which seriously affects the quality of life of patients.Cur‐rently,Western medicine has poor therapeut...Irritable bowel syndrome(IBS-D)with diarrhea is a common gastrointestinal functional disease in clinical practice,which seriously affects the quality of life of patients.Cur‐rently,Western medicine has poor therapeutic effects,while traditional Chinese medi‐cine has unique advantages in relieving IBS-D symptoms and preventing recurrence.In recent years,especially with external treatment of traditional Chinese medicine,it has become a new treatment direction in clinical practice and has achieved good therapeutic effects.This article will provide a review of recent research on the treatment of IBS-D using traditional Chinese medicine external treatment methods.展开更多
The inverse and direct piezoelectric and circuit coupling are widely observed in advanced electro-mechanical systems such as piezoelectric energy harvesters.Existing strongly coupled analysis methods based on direct n...The inverse and direct piezoelectric and circuit coupling are widely observed in advanced electro-mechanical systems such as piezoelectric energy harvesters.Existing strongly coupled analysis methods based on direct numerical modeling for this phenomenon can be classified into partitioned or monolithic formulations.Each formulation has its advantages and disadvantages,and the choice depends on the characteristics of each coupled problem.This study proposes a new option:a coupled analysis strategy that combines the best features of the existing formulations,namely,the hybrid partitioned-monolithic method.The analysis of inverse piezoelectricity and the monolithic analysis of direct piezoelectric and circuit interaction are strongly coupled using a partitioned iterative hierarchical algorithm.In a typical benchmark problem of a piezoelectric energy harvester,this research compares the results from the proposed method to those from the conventional strongly coupled partitioned iterative method,discussing the accuracy,stability,and computational cost.The proposed hybrid concept is effective for coupled multi-physics problems,including various coupling conditions.展开更多
Hodgkin's lymphoma(HL)is a common,malignant hematological tumor of the lymph nodes and lymphatic system,accounting for 10%of all lymphomas.HL comprises 2 main subtypes:classical HL(cHL)and nodular lymphocyte predo...Hodgkin's lymphoma(HL)is a common,malignant hematological tumor of the lymph nodes and lymphatic system,accounting for 10%of all lymphomas.HL comprises 2 main subtypes:classical HL(cHL)and nodular lymphocyte predominant HL.展开更多
Fullerenes:The extensive development of nanoscience that has marked this century continues to evolve,producing new materials,structures,and devices for the treatments of diverse pathologies.Fullerenes are a family of ...Fullerenes:The extensive development of nanoscience that has marked this century continues to evolve,producing new materials,structures,and devices for the treatments of diverse pathologies.Fullerenes are a family of nanoparticles with great applicative promise due to their small size(approximately 1 nm in diameter),structure,and capacity to cross biological barriers.展开更多
文摘Candidiasis, also known as candidiasis vulvovaginitis, is an infection caused by different types of Candida fungi, the most frequent being Candida albicans. The present study reports an effective strategy, which opens new avenues for the treatment of this public health problem. The MAC<sup>®</sup> Methodology, conventional laser light-emitting (LLLT)/LED) methods are based on the biphasic response demonstrated many times in LLLT research and as with other forms of drugs, a “drug” (irradiation parameters) and a “dose” (irradiation times) and the “Arndt-Schulz Law” is often cited as a suitable model to describe the dose-dependent effects of LLLT. This method uses photopharmaceuticals, cell markers and the use of correct parameters for each case to induce the acceleration of tissue repair. The present study shows a case of a 32-year-old patient diagnosed with recurrent candidiasis 4 years ago. Eighteen sessions were performed (every other day) using a photoactivated component (Methylene blue 1% + Clotrimazole 1%) and LED phototherapy (red, blue and violet) with emission times of 60 - 260 seconds for each applicator, according to the dose recommendations of the scar acceleration method (MAC<sup>®</sup>). At the sixth treatment session there was a noticeable decrease in the itching sensation reported by the patient. In session 11 she reported feeling a great improvement, indicating that she no longer felt itching in any area after 18 sessions. The present case demonstrates new methodologies to treat common problems in the population that have a positive impact on the quality of life. This methodology has a promising future because it is non-invasive and requires a great biological transformation for inflammatory, fungal and viral control.
文摘Food safety problems caused by excessive nitrite addition have been frequently reported and the detection of nitrite in food is particularly important. The standing time during the pretreatment of primary sample has a great influence on the concentration of nitrite tested by spectrophotometric method. In this context, three kinds of food samples are prepared, including canned mustard, canned fish and home-made pickled water. A series of standing times are placed during the sample pretreatments and the corresponding nitrite contents in these samples are detected by spectrophotometric method based on N-ethylenediamine dihydrochloride. This study aims to find out a reasonable standing time during the pretreatment of food sample, providing influence factor for precise detection of nitrite.
基金supported by National Key Research and Development Program of China(2017YFA0403804)National Natural Science Foundation of China(51825401)
文摘Ultrasonic treatment has great contributions on modifying the morphology,dimension and distribution of constituent phases during solidification,which serve as dominate factors influencing the hydrogen storage performance of Mg-based alloys.In this research,ultrasonic treatment is utilized as a novel method to enhance the de-/hydriding properties of Mg-2Ni(at.%)alloy.Due to ultrasonic treatment,the microstructure of as-cast alloy is significantly refined and homogenized.Ascribing to the increased eutectic boundaries and shortened distance insideα-Mg for hydrogen atoms diffusion,the hydrogen uptake capacities and isothermal de-/hydriding rates improve effectively,especially at lower temperature.The peak desorption temperature reduces from 392.99°C to 345.56°C,and the dehydriding activation energy decreases from 101.93 k J mol^(-1)to 88.65 k J mol^(-1).Weakened hysteresis of plateau pressures and slightly optimized thermodynamics are determined from the pressure-composition isotherms.Owing to the refined primary Mg,a larger amount of hydrogen with the higher hydriding proportion is absorbed in the first stage when hydrides nucleate in eutectic region and grow on primary Mg periphery subsequently before MgH2colonies impinging,resulting in the enhancement of hydrogenation rates and capacities.
基金supported by the Transverse Research Project of Shanghai Ninth People’s Hospital(No.JYHX2022007)
文摘Based on the latest classification by the International Society for the Study of Vascular Anomalies in 2018,vascular malformations(VMs)can be categorized into simple,combined,VMs of major named vessels,and VMs associated with other anomalies.Simple VMs include lymphatic,venous,capillary,and arteriovenous malformations(AVMs).AVMs represent disorders of direct arteriovenous shunts caused by the absence of a capillary bed between the involved arteries and veins.This abnormal vascular communication causes arterial blood to accumulate in the venous vessels,thus resulting in venous hypertension and characteristic clinical manifestations,such as pulsation,tremors,and elevated temperature.AVMs can occur sporadically or as manifestations of syndromic lesions and are considered among the most complex and challenging VMs.The diagnosis and treatment of AVMs can vary depending on the lesion location and associated clinical symptoms,thus complicating their management.Herein,we discuss peripheral AVMs in terms of their clinical manifestations,imaging examinations,and staging systems to provide a comprehensive reference for the treatment,evaluation methods,and follow-up procedures for this vascular anomaly.
文摘Finding out the desired drug combinations is a challenging task because of the number of different combinations that exist and the adversarial effects that may arise. In this work, we generate drug combinations over multiple stages using distance calculation metrics from supervised learning, clustering, and a statistical similarity calculation metric for deriving the optimal treatment sequences. The combination generation happens for each patient based on the characteristics (features) observed during each stage of treatment. Our approach considers not the drug-to-drug (one-to-one) effect, but rather the effect of group of drugs with another group of drugs. We evaluate the combinations using an FNN model and identify future improvement directions.
基金supported by the National Key Research and Development Program of China(No.2023YFC2907600)the National Natural Science Foundation of China(Nos.42077267,42277174 and 52074164)+2 种基金the Natural Science Foundation of Shandong Province,China(No.ZR2020JQ23)the Opening Project of State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology(No.KFJJ21-02Z)the Fundamental Research Funds for the Central Universities,China(No.2022JCCXSB03).
文摘The technology of drilling tests makes it possible to obtain the strength parameter of rock accurately in situ. In this paper, a new rock cutting analysis model that considers the influence of the rock crushing zone(RCZ) is built. The formula for an ultimate cutting force is established based on the limit equilibrium principle. The relationship between digital drilling parameters(DDP) and the c-φ parameter(DDP-cφ formula, where c refers to the cohesion and φ refers to the internal friction angle) is derived, and the response of drilling parameters and cutting ratio to the strength parameters is analyzed. The drillingbased measuring method for the c-φ parameter of rock is constructed. The laboratory verification test is then completed, and the difference in results between the drilling test and the compression test is less than 6%. On this basis, in-situ rock drilling tests in a traffic tunnel and a coal mine roadway are carried out, and the strength parameters of the surrounding rock are effectively tested. The average difference ratio of the results is less than 11%, which verifies the effectiveness of the proposed method for obtaining the strength parameters based on digital drilling. This study provides methodological support for field testing of rock strength parameters.
文摘Clubfoot malformation is the most common serious congenital anomaly affecting the foot in children. Its treatment by the Ponseti method is simple, profitable and widely used in the world. Objective: The objective of this study was to identify the factors of the failure of its treatment by the Ponseti method. Material and Method: We carried out a retrospective and descriptive study of cases of congenital equinus clubfoot varus at the Reference Health Care Center of Commune III of Bamako over 26 months from September 2020 to November 2022. Data were treated with the utmost anonymity. Result: This study was performed on 44 children seen for clubfoot: male (68%) and female (32%), with a sex ratio of 2.1. We obtained 13 cases of recidivism including 7 boys and 6 girls. We found 21 cases of unilateral and 23 bilateral;among which 9 recurrences were found against 4 in the unilateral forms. 85% of recurrences did not have good adherence to the splint and 62% did not come regularly for follow-up consultation. We obtained 33 children with idiopathic clubfeet (75%) with a recurrence of 24%, and 7 children with secondary clubfeet with 71 % recurrence. There was no recurrence in the postural type. Among the recurrences, 38.5% started treatment between 1 and 6 months, 23.1% from 0 to 1 month and 15.4% at 2 years and more. 85% of recurrences had a Pirani score between 4.5 to 6 at the start of treatment and 15% at a score of 2.5 to 4. Conclusion: The factors of the failure of the Ponseti method are mainly non-compliance with treatment, secondary clubfeet, and a high Pirani score at the start of treatment.
基金The Guangdong Basic and Applied Basic Research Foundation(2022A1515010730)National Natural Science Foundation of China(32001647)+2 种基金National Natural Science Foundation of China(31972022)Financial and moral assistance supported by the Guangdong Basic and Applied Basic Research Foundation(2019A1515011996)111 Project(B17018)。
文摘In this study,the structural characters,antioxidant activities and bile acid-binding ability of sea buckthorn polysaccharides(HRPs)obtained by the commonly used hot water(HRP-W),pressurized hot water(HRP-H),ultrasonic(HRP-U),acid(HRP-C)and alkali(HRP-A)assisted extraction methods were investigated.The results demonstrated that extraction methods had significant effects on extraction yield,monosaccharide composition,molecular weight,particle size,triple-helical structure,and surface morphology of HRPs except for the major linkage bands.Thermogravimetric analysis showed that HRP-U with filamentous reticular microstructure exhibited better thermal stability.The HRP-A with the lowest molecular weight and highest arabinose content possessed the best antioxidant activities.Moreover,the rheological analysis indicated that HRPs with higher galacturonic acid content and molecular weight showed higher viscosity and stronger crosslinking network(HRP-C,HRP-W and HRP-U),which exhibited stronger bile acid binding capacity.The present findings provide scientific evidence in the preparation technology of sea buckthorn polysaccharides with good antioxidant and bile acid binding capacity which are related to the structure affected by the extraction methods.
文摘The present letter to the editor is related to the review with the title“Past,present,and future of long-term treatment for hepatitis B virus.”Chronic hepatitis B(CHB)represents an important and pressing public health concern.Timely identification and effective antiviral therapy hold the potential to reduce liver-related mortality attributable to chronic infection with hepatitis B virus(HBV)substantially.However,the current global treatment rates for CHB remain conspicuously low,with the excessively stringent treatment criteria advocated by national CHB guidelines being a contributing factor to these low rates.Nevertheless,recent strides in comprehending this malady and the emergence of novel antiviral agents prompt the imperative re-evaluation of treatment standards to extend the sphere of potential beneficiaries.An impending need arises for a novel paradigm for the classification of patients with CHB,the expansion of antiviral treatment eligibility for HBV-infected individuals,and even the streamlining of the diagnostic process for CHB to amplify cost-effectiveness and augment survival prospects.
基金supported as part of the Center for Hierarchical Waste Form Materials,an Energy Frontier Research Center funded by the U.S.Department of Energy,Office of Science,Basic Energy Sciences under Award No.DE-SC0016574.
文摘Porous materials present significant advantages for absorbing radioactive isotopes in nuclear waste streams.To improve absorption efficiency in nuclear waste treatment,a thorough understanding of the diffusion-advection process within porous structures is essential for material design.In this study,we present advancements in the volumetric lattice Boltzmann method(VLBM)for modeling and simulating pore-scale diffusion-advection of radioactive isotopes within geopolymer porous structures.These structures are created using the phase field method(PFM)to precisely control pore architectures.In our VLBM approach,we introduce a concentration field of an isotope seamlessly coupled with the velocity field and solve it by the time evolution of its particle population function.To address the computational intensity inherent in the coupled lattice Boltzmann equations for velocity and concentration fields,we implement graphics processing unit(GPU)parallelization.Validation of the developed model involves examining the flow and diffusion fields in porous structures.Remarkably,good agreement is observed for both the velocity field from VLBM and multiphysics object-oriented simulation environment(MOOSE),and the concentration field from VLBM and the finite difference method(FDM).Furthermore,we investigate the effects of background flow,species diffusivity,and porosity on the diffusion-advection behavior by varying the background flow velocity,diffusion coefficient,and pore volume fraction,respectively.Notably,all three parameters exert an influence on the diffusion-advection process.Increased background flow and diffusivity markedly accelerate the process due to increased advection intensity and enhanced diffusion capability,respectively.Conversely,increasing the porosity has a less significant effect,causing a slight slowdown of the diffusion-advection process due to the expanded pore volume.This comprehensive parametric study provides valuable insights into the kinetics of isotope uptake in porous structures,facilitating the development of porous materials for nuclear waste treatment applications.
基金supported by the National Natural Science Foundation of China(Grant No.51901082)the National Postdoctoral Program for Innovative Talents(BX20200137)the National Defense Basic Scientific Research Program of China(JCKY2018110C060)。
文摘Additive manufacturing(AM)is a free-form technology that shows great potential in the integrated creation of three-dimensional(3D)electronics.However,the fabrication of 3D conformal circuits that fulfill the requirements of high service temperature,high conductivity and high resolution remains a challenge.In this paper,a hybrid AM method combining the fused deposition modeling(FDM)and hydrophobic treatment assisted laser activation metallization(LAM)was proposed for manufacturing the polyetheretherketone(PEEK)-based 3D electronics,by which the conformal copper patterns were deposited on the 3D-printed PEEK parts,and the adhesion between them reached the 5B high level.Moreover,the 3D components could support the thermal cycling test from-55℃ to 125℃ for more than 100 cycles.Particularly,the application of a hydrophobic coating on the FDM-printed PEEK before LAM can promote an ideal catalytic selectivity on its surface,not affected by the inevitable printing borders and pores in the FDM-printed parts,then making the resolution of the electroless plated copper lines improved significantly.In consequence,Cu lines with width and spacing of only60μm and 100μm were obtained on both as-printed and after-polished PEEK substrates.Finally,the potential of this technique to fabricate 3D conformal electronics was demonstrated.
文摘BACKGROUND Congenital duodenal webs are rare in adults and can lead to various symptoms such as nausea,vomiting,and postprandial fullness.The treatment for this disease is mostly surgical.Endoscopic treatment techniques have been developed and attempted for this disease.Endoscopic radial incision and cutting(RIC)techniques are reportedly very effective in benign anastomotic stricture.This case report highlights the effectiveness and safety of endoscopic RIC as a minimally invasive treatment for adult congenital duodenal webs.CASE SUMMARY A 23-year-old female patient with indigestion was referred to a tertiary hospital.The patient complained of postprandial fullness in the epigastric region.Previous physical examinations or blood tests indicated no abnormalities.Computed tomography revealed an eccentric broad-based delayed-enhancing mass-like lesion in the second portion of the duodenum.Endoscopy showed an enlarged gastric cavity and a significantly dilated duodenal bulb;a very small hole was observed in the distal part of the second portion,and scope passage was not possible.Gastrografin upper gastrointestinal series was performed,revealing an intraduodenal barium contrast-filled sac with a curvilinear narrow radiolucent rim,a typical"windsock"sign.Endoscopic RIC was performed on the duodenal web.The patient recovered uneventfully.Follow-up endoscopy showed a patent duodenal lumen without any residual stenosis.The patient reported complete resolution of symptoms at the 18-month follow-up.CONCLUSION Endoscopic RIC may be an effective treatment for congenital duodenal webs in adults.
基金supported by National Key Research and Development Program of China(No.2022YFC2401503)National Natural Science Foundation of China(Nos.11875299,61631001,U1532264,and 12005271).
文摘Intensity-modulated particle therapy(IMPT)with carbon ions is comparatively susceptible to various uncertainties caused by breathing motion,including range,setup,and target positioning uncertainties.To determine relative biological effectiveness-weighted dose(RWD)distributions that are resilient to these uncertainties,the reference phase-based four-dimensional(4D)robust optimization(RP-4DRO)and each phase-based 4D robust optimization(EP-4DRO)method in carbon-ion IMPT treatment planning were evaluated and compared.Based on RWD distributions,4DRO methods were compared with 4D conventional optimization using planning target volume(PTV)margins(PTV-based optimization)to assess the effectiveness of the robust optimization methods.Carbon-ion IMPT treatment planning was conducted in a cohort of five lung cancer patients.The results indicated that the EP-4DRO method provided better robustness(P=0.080)and improved plan quality(P=0.225)for the clinical target volume(CTV)in the individual respiratory phase when compared with the PTV-based optimization.Compared with the PTV-based optimization,the RP-4DRO method ensured the robustness(P=0.022)of the dose distributions in the reference breathing phase,albeit with a slight sacrifice of the target coverage(P=0.450).Both 4DRO methods successfully maintained the doses delivered to the organs at risk(OARs)below tolerable levels,which were lower than the doses in the PTV-based optimization(P<0.05).Furthermore,the RP-4DRO method exhibited significantly superior performance when compared with the EP-4DRO method in enhancing overall OAR sparing in either the individual respiratory phase or reference respiratory phase(P<0.05).In general,both 4DRO methods outperformed the PTV-based optimization in terms of OAR sparing and robustness.
基金Research was supported by the NSFC Grant 11872210Research was supported by the NSFC Grant 11872210 and Grant No.MCMS-I-0120G01+1 种基金Research supported in part by the AFOSR Grant FA9550-20-1-0055NSF Grant DMS-2010107.
文摘Fixed-point fast sweeping WENO methods are a class of efficient high-order numerical methods to solve steady-state solutions of hyperbolic partial differential equations(PDEs).The Gauss-Seidel iterations and alternating sweeping strategy are used to cover characteristics of hyperbolic PDEs in each sweeping order to achieve fast convergence rate to steady-state solutions.A nice property of fixed-point fast sweeping WENO methods which distinguishes them from other fast sweeping methods is that they are explicit and do not require inverse operation of nonlinear local systems.Hence,they are easy to be applied to a general hyperbolic system.To deal with the difficulties associated with numerical boundary treatment when high-order finite difference methods on a Cartesian mesh are used to solve hyperbolic PDEs on complex domains,inverse Lax-Wendroff(ILW)procedures were developed as a very effective approach in the literature.In this paper,we combine a fifthorder fixed-point fast sweeping WENO method with an ILW procedure to solve steadystate solution of hyperbolic conservation laws on complex computing regions.Numerical experiments are performed to test the method in solving various problems including the cases with the physical boundary not aligned with the grids.Numerical results show highorder accuracy and good performance of the method.Furthermore,the method is compared with the popular third-order total variation diminishing Runge-Kutta(TVD-RK3)time-marching method for steady-state computations.Numerical examples show that for most of examples,the fixed-point fast sweeping method saves more than half CPU time costs than TVD-RK3 to converge to steady-state solutions.
文摘This research explores strategies to enhance the efficiency of secondary treatment in Vertical Flow Constructed Wetlands (CW) in Montenegro. The focus is on selecting appropriate primary treatment methods alongside three distinct substrate types to improve wastewater treatment efficacy. The study examines the combination of two primary treatments with different substrate types in constructed wetlands (CW1, CW2, and CW3). The primary treatments include the existing wastewater treatment plant (WWTP) in Podgorica, involving coarse material removal through screens, inert material separation in aerated sand traps, and sediment and suspended matter removal in primary sedimentation tanks. The Extreme Separator (ExSep) was employed to evaluate its efficacy as a primary treatment method. The research demonstrates that the efficiency of CW can be significantly enhanced by selecting suitable primary treatment methods and substrates in Podgorica’s conditions. The most promising results were achieved by combining ExSep as a primary treatment with secondary treatment in CW-3. The removal efficiencies after CW3 for COD, BOD, and TSS exceeded 89%, 93%, and 91%, respectively. The outcomes underscore the significance of primary treatment in mitigating pollutant loads before discharge into the constructed wetlands, emphasizing potential areas for further optimization in wastewater treatment practices to enhance environmental sustainability and water quality management.
文摘Background: The robustness is a measurement of an analytical chemical method and its ability to contain unaffected by little with deliberate variation of analytical chemical method parameters. The analytical chemical method variation parameters are based on pH variability of buffer solution of mobile phase, organic ratio composition changes, stationary phase (column) manufacture, brand name and lot number variation;flow rate variation and temperature variation of chromatographic system. The analytical chemical method for assay of Atropine Sulfate conducted for robustness evaluation. The typical variation considered for mobile phase organic ratio change, change of pH, change of temperature, change of flow rate, change of column etc. Purpose: The aim of this study is to develop a cost effective, short run time and robust analytical chemical method for the assay quantification of Atropine in Pharmaceutical Ophthalmic Solution. This will help to make analytical decisions quickly for research and development scientists as well as will help with quality control product release for patient consumption. This analytical method will help to meet the market demand through quick quality control test of Atropine Ophthalmic Solution and it is very easy for maintaining (GDP) good documentation practices within the shortest period of time. Method: HPLC method has been selected for developing superior method to Compendial method. Both the compendial HPLC method and developed HPLC method was run into the same HPLC system to prove the superiority of developed method. Sensitivity, precision, reproducibility, accuracy parameters were considered for superiority of method. Mobile phase ratio change, pH of buffer solution, change of stationary phase temperature, change of flow rate and change of column were taken into consideration for robustness study of the developed method. Results: The limit of quantitation (LOQ) of developed method was much low than the compendial method. The % RSD for the six sample assay of developed method was 0.4% where the % RSD of the compendial method was 1.2%. The reproducibility between two analysts was 100.4% for developed method on the contrary the compendial method was 98.4%.
文摘Irritable bowel syndrome(IBS-D)with diarrhea is a common gastrointestinal functional disease in clinical practice,which seriously affects the quality of life of patients.Cur‐rently,Western medicine has poor therapeutic effects,while traditional Chinese medi‐cine has unique advantages in relieving IBS-D symptoms and preventing recurrence.In recent years,especially with external treatment of traditional Chinese medicine,it has become a new treatment direction in clinical practice and has achieved good therapeutic effects.This article will provide a review of recent research on the treatment of IBS-D using traditional Chinese medicine external treatment methods.
基金supported by the Japan Society for the Promotion of Science,KAKENHI Grant No.23H00475.
文摘The inverse and direct piezoelectric and circuit coupling are widely observed in advanced electro-mechanical systems such as piezoelectric energy harvesters.Existing strongly coupled analysis methods based on direct numerical modeling for this phenomenon can be classified into partitioned or monolithic formulations.Each formulation has its advantages and disadvantages,and the choice depends on the characteristics of each coupled problem.This study proposes a new option:a coupled analysis strategy that combines the best features of the existing formulations,namely,the hybrid partitioned-monolithic method.The analysis of inverse piezoelectricity and the monolithic analysis of direct piezoelectric and circuit interaction are strongly coupled using a partitioned iterative hierarchical algorithm.In a typical benchmark problem of a piezoelectric energy harvester,this research compares the results from the proposed method to those from the conventional strongly coupled partitioned iterative method,discussing the accuracy,stability,and computational cost.The proposed hybrid concept is effective for coupled multi-physics problems,including various coupling conditions.
文摘Hodgkin's lymphoma(HL)is a common,malignant hematological tumor of the lymph nodes and lymphatic system,accounting for 10%of all lymphomas.HL comprises 2 main subtypes:classical HL(cHL)and nodular lymphocyte predominant HL.
基金supported by Ministarstvo Prosvete,Nauke i Tehnoloskog Razvoja,Grant/Award Number:451-03-9/2021-14/200007 and 451-03-9/2021-14/200017Zepter International Foundation,Grant/Award Number:5/2019(to Sl)。
文摘Fullerenes:The extensive development of nanoscience that has marked this century continues to evolve,producing new materials,structures,and devices for the treatments of diverse pathologies.Fullerenes are a family of nanoparticles with great applicative promise due to their small size(approximately 1 nm in diameter),structure,and capacity to cross biological barriers.