Effects of pressure relief holes on coal burst:Insights from true-triaxial unloading tests

Drilling pressure relief is one of the methods to reduce the risk of coal bursts in deep mines.However,the effect of the drill hole orientations has not been studied well enough to understand their impact on the burst failure mechanism.In this study,we investigated two designs of drill hole orientations.The first design includes drill holes located on the upper free face of the rectangular samples and labelled as upper hole(UH)and centre hole(CH)e the long axes of the drill holes are aligned with minor principal stress,s3,direction.The second design includes drill holes at the top(TH)and the side(SH)of the rectangular samples in which the long axes of the drill holes are aligned with the maximum,s1,and intermediate principal stress,s2,directions,respectively.The coal samples with the proposed drill hole orientations were subjected to the true-triaxial unloading coal burst tests.The results show that the drill holes reduce the risk of coal bursts.However,we found that the intensity of coal burst was significantly reduced with the SH-type,followed by the CH-types.We also observed that the coal burst intensity is reduced better for the CH,UH,TH,and SH-type drilling patterns.However,it was found that the orientations of drill holes have little influence on the failure mode(splitting).The acoustic emission(AE)activities for coal with drill holes noticeably decreased,especially for the UH and CH layouts.The drill holes reduced the upper limit of the AE entropy(chaos of microcracks generation).However,regarding reducing the coal burst risk,the TH and SH are less effective than UH and CH.

Ringlike failure experiment of thick-walled limestone cylinder specimens in triaxial unloading tests

In order to study the failure of surrounding rock under high in situ stress in deep underground engineering projects, disturbed by excavation unloading, we carried out triaxial unloading experiments using thickwalled cylinder specimens on a TATW-2000 rock servo-controlled triaxial testing machine in a laboratory. The specimens were made of limestone material, taken from Tongshan county, Xuzhou city, Jiangsu province, China. In our experiments, rock deformation and failure behavior was studied through loading and unloading of inner hole pressure of thick-walled cylinder specimens. At first, the axial stress, confining pressure and inner pressure were increased simultaneously to a specified designed state of stress. Then, keeping the axial stress and confining pressure stable, the pressure on the inner hole was decreased until the specimen was fractured. When the inner pressure was released completely but the specimen did not fracture, the confining pressure was decreased subsequently until complete failure occurred. Our experimental results suggest that traces of major circular ringlike fractures with a number of radial cracks often appear in thick cylinder walls. This type of ringlike failure phenomenon, similar to intermittent zonal fracturing characteristics of deep exploitation, has, so far, not been published. Our experimental results show that rock deformation and failure behavior of thick-walled limestone cylinders vary under different stress paths between loading and unloading. Tensile failure and orderly failure surfaces occur under unloading conditions while irregular damaged rock blocks are produced during loading failure. This type of triaxial unloading experiment provides for new research methodology and approach for thorough investigations on intermittent zonal fracturing in deep underground excavations.

Characteristic stress and strain precursor information for fine-grained granite during failure process under triaxial loading and unloading conditions

The unloading effect by excavation may cause irreversible and severe damage to the surrounding rock masses in underground engineering.In this paper,both conventional triaxial compression(CTC)tests and triaxial unloading confining pressure(TUCP)tests were conducted on fine-grained granite to study its triaxial compression failure processes due to unloading.Based on the crack volumetric strain(CVS)method,the crack axial strain(CAS)method and crack radial area strain(CRAS)method were proposed to identify the failure precursor information(including stress thresholds and axial strain at the initiation point of crack connectivity stage)during the rock failure processes.The results of the CTC tests show that the stable crack development stressσsd,unstable crack development stressσusd,and crack connectivity stressσct identified by the CAS method are 6%,74%–84%,and 86%–97%of the peak stress,respectively.For the TUCP cases,as the confining pressure increases,the stress thresholds,axial pressure at failure and axial strain at the start of the crack connectivity stage increase,while the time ratio of the crack connectivity stage to the entire unloading stage decreases.This indicates that fine-grained granite is prone to generate more cracks and leads to fail suddenly under high confining pressure.Furthermore,this new method demonstrates that the point at which the derivative of the radial crack area strain transitions from stable to a sudden increase or decrease is defined as the precursor point of rock failure.The results of axial strain at the starting point of the crack connectivity stage are very close to those predicted by the AE method,withβ1 no more than 11%.

Evolution of mechanical parameters of Shuangjiangkou granite under different loading cycles and stress paths

Surrounding rocks at different locations are generally subjected to different stress paths during the process of deep hard rock excavation.In this study,to reveal the mechanical parameters of deep surrounding rock under different stress paths,a new cyclic loading and unloading test method for controlled true triaxial loading and unloading and principal stress direction interchange was proposed,and the evolution of mechanical parameters of Shuangjiangkou granite under different stress paths was studied,including the deformation modulus,elastic deformation increment ratios,fracture degree,cohesion and internal friction angle.Additionally,stress path coefficient was defined to characterize different stress paths,and the functional relationships among the stress path coefficient,rock fracture degree difference coefficient,cohesion and internal friction angle were obtained.The results show that during the true triaxial cyclic loading and unloading process,the deformation modulus and cohesion gradually decrease,while the internal friction angle gradually increases with increasing equivalent crack strain.The stress path coefficient is exponentially related to the rock fracture degree difference coefficient.As the stress path coefficient increases,the degrees of cohesion weakening and internal friction angle strengthening decrease linearly.During cyclic loading and unloading under true triaxial principal stress direction interchange,the direction of crack development changes,and the deformation modulus increases,while the cohesion and internal friction angle decrease slightly,indicating that the principal stress direction interchange has a strengthening effect on the surrounding rocks.Finally,the influences of the principal stress interchange direction on the stabilities of deep engineering excavation projects are discussed.

Strength characteristics and energy dissipation evolution of thawing silty clay during cyclic triaxial loading

Cyclic triaxial tests are conducted to analyze the evolution of strength parameters and energy dissipation of thawing silty clay under different stress paths.The effects of freezing temperature,thawing temperature and confining pressures on the stress-strain and strength characteristics of soil samples are studied through monotonic loading and cyclic loading tests by using high-and low-temperature triaxial apparatus.The variation of the total work,elastic deformation energy,dissipated energy,energy dissipation rate,residual strain,and damage variable during loading and unloading are discussed.The experimental results show that the samples have higher strain tolerance under high confining pressure,low freezing temperature,and low thawing temperature,and the same other conditions.The soil sample state and failure pattern can be judged by using the energy parameters measured in the experiment.

Studies on classification,criteria and control of rockbursts

This paper attempts to present the findings involving rockbursts classification, rockburst failure criteria, and related control measures. Experimental investigations were performed using the strainburst testing machine and impact-induced rockburst testing machine. According to the stress paths and experimental methods, rockbursts were classified into two major groups, i.e. the strainbursts and impact-induced bursts. The mechanisms and criteria of rockburst obtained from experimental investigations were discussed. Then, the developments of constant-resistance and large-deformation bolt （CRLDB）, which can adapt itself to the external loading at a constant resistance by elongating continually, were introduced. The deformation energy Of country rocks with large deformation can be absorbed by CRLDBs. Finally, the principles and the experimental results for control and prevention of rockburst using the CRLDBs were presented.