To overcome hole-injection limitation of p^＋-n emitter junction in 4H-SiC light triggered thyristor, a novel high- voltage 4H-SiC light triggered thyristor with double-deck thin n-base structure is proposed and demon...To overcome hole-injection limitation of p^＋-n emitter junction in 4H-SiC light triggered thyristor, a novel high- voltage 4H-SiC light triggered thyristor with double-deck thin n-base structure is proposed and demonstrated by two- dimensional numerical simulations. In this new structure, the conventional thin n-base is split to double-deck. The hole- injection of p^＋-n emitter junction is modulated by modulating the doping concentration and thickness of upper-deck thin n- base. With double-deck thin n-base, the current gain coefficient of the top pnp transistor in 4H-SiC light triggered thyristor is enhanced. As a result, the triggering light intensity and the turn-on delay time of 4H-SiC light triggered thyristor are both reduced. The simulation results show that the proposed 10-kV 4H-SiC light triggered thyristor is able to be triggered on by 500-mW/cm^2 ultraviolet light pulse. Meanwhile, the turn-on delay time of the proposed thyristor is reduced to 337 ns.展开更多
For modern particle physics experiments,trigger-less data acquisition(DAQ) system has been put into practice because of the need of reaction multiplicity and trigger flexibility.In such new DAQ systems,global synchron...For modern particle physics experiments,trigger-less data acquisition(DAQ) system has been put into practice because of the need of reaction multiplicity and trigger flexibility.In such new DAQ systems,global synchronized clock plays an important role because it affects the granularity of time slice and precision of reference clock.In this paper,a novel synchronized clock distribution method is proposed.With the help of modulation technique,master clock module distributes system clock to each slave module.To synchronize slave clocks,the propagation delay is adjusted and the clock phase is aligned by an FPGA chip automatically.Furthermore,an ADCbased method is proposed to evaluate the performance of multi-module clock synchronization simultaneously.The experiments of a prototype system show that slave clocks can be synchronized less than 100 ps over 150 m range.The proposed method is simple and flexible,and it can be used in trigger-less DAQ system and other applications of clock distribution preciously.展开更多
With the recent development of digital Micro Electro Mechanical System （MEMS） sensors, the cost of monitoring and detecting seismic events in real time can be greatly reduced. Ability of MEMS accelerograph to record...With the recent development of digital Micro Electro Mechanical System （MEMS） sensors, the cost of monitoring and detecting seismic events in real time can be greatly reduced. Ability of MEMS accelerograph to record a seismic event depends upon the efficiency of triggering algorithm, apart from the sensor＇s sensitivity. There are several classic triggering algorithms developed to detect seismic events, ranging from basic amplitude threshold to more sophisticated pattern recognition. Algorithms based on STA/LTA are reported to be computationally efficient for real time monitoring. In this paper, we analyzed several STA/LTA algorithms to check their efficiency and suitability using data obtained from the Quake Catcher Network （network of MEMS accelerometer stations）. We found that most of the STA/LTA algorithms are suitable for use with MEMS accelerometer data to accurately detect seismic events. However, the efficiency of any particular algorithm is found to be dependent on the parameter set used （i.e., window width of STA, LTA and threshold level）.展开更多
脉冲电源系统性能基本取决于放电开关的特性,真空触发开关因其具有工作电压范围宽、承载电荷量高、介质恢复迅速、结构紧凑等优点,可用于脉冲电源的主开关。采用RVU-43型真空触发开关研制了一套总储能2 MJ、额定工作电压13 k V的脉冲电...脉冲电源系统性能基本取决于放电开关的特性,真空触发开关因其具有工作电压范围宽、承载电荷量高、介质恢复迅速、结构紧凑等优点,可用于脉冲电源的主开关。采用RVU-43型真空触发开关研制了一套总储能2 MJ、额定工作电压13 k V的脉冲电源。电源系统由17个118 k J电容储能模块并联组成,单个模块短路放电最大电流达52 k A,系统包含了充电、控制、测量子系统。电源在模拟负载上进行了单模块、系统同步与时序控制放电性能测试,并在电热化学发射装置上进行了发射试验。结果表明,系统输出的电流幅值较高且波形灵活可调,可靠性高,可满足电热化学发射试验的研究。展开更多
基金supported by the National Natural Science Foundation of China(Grant No.51677149)
文摘To overcome hole-injection limitation of p^＋-n emitter junction in 4H-SiC light triggered thyristor, a novel high- voltage 4H-SiC light triggered thyristor with double-deck thin n-base structure is proposed and demonstrated by two- dimensional numerical simulations. In this new structure, the conventional thin n-base is split to double-deck. The hole- injection of p^＋-n emitter junction is modulated by modulating the doping concentration and thickness of upper-deck thin n- base. With double-deck thin n-base, the current gain coefficient of the top pnp transistor in 4H-SiC light triggered thyristor is enhanced. As a result, the triggering light intensity and the turn-on delay time of 4H-SiC light triggered thyristor are both reduced. The simulation results show that the proposed 10-kV 4H-SiC light triggered thyristor is able to be triggered on by 500-mW/cm^2 ultraviolet light pulse. Meanwhile, the turn-on delay time of the proposed thyristor is reduced to 337 ns.
基金Supported by the National Natural Science Foundation of China(No.11005107)Anhui University Natural Science Research(No.K J2010A334)
文摘For modern particle physics experiments,trigger-less data acquisition(DAQ) system has been put into practice because of the need of reaction multiplicity and trigger flexibility.In such new DAQ systems,global synchronized clock plays an important role because it affects the granularity of time slice and precision of reference clock.In this paper,a novel synchronized clock distribution method is proposed.With the help of modulation technique,master clock module distributes system clock to each slave module.To synchronize slave clocks,the propagation delay is adjusted and the clock phase is aligned by an FPGA chip automatically.Furthermore,an ADCbased method is proposed to evaluate the performance of multi-module clock synchronization simultaneously.The experiments of a prototype system show that slave clocks can be synchronized less than 100 ps over 150 m range.The proposed method is simple and flexible,and it can be used in trigger-less DAQ system and other applications of clock distribution preciously.
基金IIT Roorkee under the Faculty Initiation Grant No.100556
文摘With the recent development of digital Micro Electro Mechanical System （MEMS） sensors, the cost of monitoring and detecting seismic events in real time can be greatly reduced. Ability of MEMS accelerograph to record a seismic event depends upon the efficiency of triggering algorithm, apart from the sensor＇s sensitivity. There are several classic triggering algorithms developed to detect seismic events, ranging from basic amplitude threshold to more sophisticated pattern recognition. Algorithms based on STA/LTA are reported to be computationally efficient for real time monitoring. In this paper, we analyzed several STA/LTA algorithms to check their efficiency and suitability using data obtained from the Quake Catcher Network （network of MEMS accelerometer stations）. We found that most of the STA/LTA algorithms are suitable for use with MEMS accelerometer data to accurately detect seismic events. However, the efficiency of any particular algorithm is found to be dependent on the parameter set used （i.e., window width of STA, LTA and threshold level）.
文摘脉冲电源系统性能基本取决于放电开关的特性,真空触发开关因其具有工作电压范围宽、承载电荷量高、介质恢复迅速、结构紧凑等优点,可用于脉冲电源的主开关。采用RVU-43型真空触发开关研制了一套总储能2 MJ、额定工作电压13 k V的脉冲电源。电源系统由17个118 k J电容储能模块并联组成,单个模块短路放电最大电流达52 k A,系统包含了充电、控制、测量子系统。电源在模拟负载上进行了单模块、系统同步与时序控制放电性能测试,并在电热化学发射装置上进行了发射试验。结果表明,系统输出的电流幅值较高且波形灵活可调,可靠性高,可满足电热化学发射试验的研究。
