The technique of geotextile tubes used to construct dikes for land reclamation has been widely used. The tubes are usually filled with slun＇y of soil, such as sand, silt or clay. The tensile stress developed in the g...The technique of geotextile tubes used to construct dikes for land reclamation has been widely used. The tubes are usually filled with slun＇y of soil, such as sand, silt or clay. The tensile stress developed in the geotextile during filling the tube is the dominant factor for construction of a safe dike. The existing design methods are good for designing sausage shaped tubes and can not be directly applied for designing fiat tubes, which are commonly used in dike construction. This paper presents a procedure that can detenmine the relatiorrship among the tube size, the pumping pressure, the unit weight of the slurry, and the tensile stress developed in the geotextile during the tube filing. When the tubes are piling up to form the dike, the tubes in the bottom will sustain the load from the weight of the upper ones. A procedure is also developed to calculate the changes of the mechanical and geometrical behavior of the tubes under the load with a similar method. All these approaches have been programmed, which can help dike designers to select the suitable geotextile and determine the profile of the dike.展开更多
According to the characteristics of PQF continuous rolling pass,the relationship between spread coefficient,wall thickness coefficient and elongation are analyzed.The section shape of tube in each stand outlet,the eff...According to the characteristics of PQF continuous rolling pass,the relationship between spread coefficient,wall thickness coefficient and elongation are analyzed.The section shape of tube in each stand outlet,the efficient working radius and the rotational speed of each roll are obtained,therefore,the pass parametric design is completed.A thermal-mechanical coupled model of continuous rolling tube' s forming process is established by the three-dimensional elasto-plastic finite element method,the section shape and area of tube in each stand outlet are forecasted,which is used to modify the pass.The rolling force of each roller is predict too,which provides a guidance for pass design.In addition,a visual software of PQF pass parametric design system on heavy calibre seamless tube is generated with Visual Basic.The forming dimension of tube and the rolling force of each roller are successfully obtained,by simulating the forming process of a certain series heavy calibre seamless tube.This system posses practical utilization value.By using this system,the development cycle of new product can be shortened,the reliability of pass design can be improved,and the energy consumption of rolling mill and production cost can be decreased.展开更多
Alkali recovery aiming at recovering NaOH is the best available technology in China's pulp and paper industry;an alkali recovery boiler is a popular one among all alkali recovery units. For the purpose of designin...Alkali recovery aiming at recovering NaOH is the best available technology in China's pulp and paper industry;an alkali recovery boiler is a popular one among all alkali recovery units. For the purpose of designing the most reasonable tube-panel of an evaporator in a 1500 t/d alkali recovery boiler, a total of 8 kinds of cases are put forward for finite element analysis. The modeling, meshing and calculation are carried out for each case. The stress values and their distribution rules are revealed in this paper. The slotting size for the water tubes panel is analyzed by using the optimum design module of ANSYS. After all cases are compared with each other, the optimal one is developed and exemplified in conclusion.展开更多
A design for an air-cooled test tube, with a series of modular and movable rings (cylindrical “crystallization comb”), installed in a laboratory crucible furnace is presented. The setup allows easy regulation simult...A design for an air-cooled test tube, with a series of modular and movable rings (cylindrical “crystallization comb”), installed in a laboratory crucible furnace is presented. The setup allows easy regulation simultaneous crystallization tests of a series of different crystallization rates in several columns (matrix) of test tubes, enabling fast studies of obtaining crystals. This low-budget, portable device (i.e. adjustable airstream with more simple control options), can also be applied in tube and chamber furnaces. The relations between the crystallization rate and parameters of air-cooled test tube are given and numerically analyzed.展开更多
基金the Innovation Foundation of Tianjin Mayor (Grant No.07FDZDSF02100)
文摘The technique of geotextile tubes used to construct dikes for land reclamation has been widely used. The tubes are usually filled with slun＇y of soil, such as sand, silt or clay. The tensile stress developed in the geotextile during filling the tube is the dominant factor for construction of a safe dike. The existing design methods are good for designing sausage shaped tubes and can not be directly applied for designing fiat tubes, which are commonly used in dike construction. This paper presents a procedure that can detenmine the relatiorrship among the tube size, the pumping pressure, the unit weight of the slurry, and the tensile stress developed in the geotextile during the tube filing. When the tubes are piling up to form the dike, the tubes in the bottom will sustain the load from the weight of the upper ones. A procedure is also developed to calculate the changes of the mechanical and geometrical behavior of the tubes under the load with a similar method. All these approaches have been programmed, which can help dike designers to select the suitable geotextile and determine the profile of the dike.
文摘According to the characteristics of PQF continuous rolling pass,the relationship between spread coefficient,wall thickness coefficient and elongation are analyzed.The section shape of tube in each stand outlet,the efficient working radius and the rotational speed of each roll are obtained,therefore,the pass parametric design is completed.A thermal-mechanical coupled model of continuous rolling tube' s forming process is established by the three-dimensional elasto-plastic finite element method,the section shape and area of tube in each stand outlet are forecasted,which is used to modify the pass.The rolling force of each roller is predict too,which provides a guidance for pass design.In addition,a visual software of PQF pass parametric design system on heavy calibre seamless tube is generated with Visual Basic.The forming dimension of tube and the rolling force of each roller are successfully obtained,by simulating the forming process of a certain series heavy calibre seamless tube.This system posses practical utilization value.By using this system,the development cycle of new product can be shortened,the reliability of pass design can be improved,and the energy consumption of rolling mill and production cost can be decreased.
文摘Alkali recovery aiming at recovering NaOH is the best available technology in China's pulp and paper industry;an alkali recovery boiler is a popular one among all alkali recovery units. For the purpose of designing the most reasonable tube-panel of an evaporator in a 1500 t/d alkali recovery boiler, a total of 8 kinds of cases are put forward for finite element analysis. The modeling, meshing and calculation are carried out for each case. The stress values and their distribution rules are revealed in this paper. The slotting size for the water tubes panel is analyzed by using the optimum design module of ANSYS. After all cases are compared with each other, the optimal one is developed and exemplified in conclusion.
文摘A design for an air-cooled test tube, with a series of modular and movable rings (cylindrical “crystallization comb”), installed in a laboratory crucible furnace is presented. The setup allows easy regulation simultaneous crystallization tests of a series of different crystallization rates in several columns (matrix) of test tubes, enabling fast studies of obtaining crystals. This low-budget, portable device (i.e. adjustable airstream with more simple control options), can also be applied in tube and chamber furnaces. The relations between the crystallization rate and parameters of air-cooled test tube are given and numerically analyzed.
