期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Combustion Properties of Metal Particles as Components of Modified Double-Base Propellants
1
作者 Xiaofei Qi Hongyan Li +2 位作者 Ning Yan Ying Wang Xueli Chen 《Journal of Beijing Institute of Technology》 EI CAS 2018年第2期293-301,共9页
Metal particles such as aluminum( Al),magnesium( Mg),boron( B) and nickel( Ni),as well as Mg/Al alloy( Mg/Al = 3/4) are currently the most widely used ingredients in modified doublebase propellants. In this ... Metal particles such as aluminum( Al),magnesium( Mg),boron( B) and nickel( Ni),as well as Mg/Al alloy( Mg/Al = 3/4) are currently the most widely used ingredients in modified doublebase propellants. In this contribution,the combustion properties of the metal species are studied by means of the high-speed photography technique and the non-contact wavelet-based measurement of flame temperature distribution. The combustion process of the Al,Mg and Mg/Al samples shows both gas phase reaction and surface oxidation,which yield volatile and nonvolatile products,corresponding to the oxide and suboxide respectively. However,the combustion of B and Ni shows only gas phase reaction,due to their high melting point as well as high enthalpy of vaporization. In addition to the experiments,a hypothetical combustion model has been proposed to clarify the combustion characteristics of metal species in modified double-base propellants. 展开更多
关键词 metal particles modified double-base propellant combustion properties flame structure
下载PDF
模具装配参数对管状推进剂成型质量的影响 被引量:1
2
作者 郑再芳 马飞龙 +3 位作者 陈淼 张博 李冰 谢波 《爆破器材》 CAS CSCD 北大核心 2021年第2期45-49,共5页
为解决小尺寸管状改性双基推进剂装药在压伸时弧厚差大、出料负荷高的问题,采用螺旋压伸工艺,研究了模具装配参数对装药弧厚差、出料负荷及燃速的影响。结果表明:在一定范围内减小进药嘴收缩角或模具压缩比,压伸出料负荷明显降低;进药... 为解决小尺寸管状改性双基推进剂装药在压伸时弧厚差大、出料负荷高的问题,采用螺旋压伸工艺,研究了模具装配参数对装药弧厚差、出料负荷及燃速的影响。结果表明:在一定范围内减小进药嘴收缩角或模具压缩比,压伸出料负荷明显降低;进药嘴收缩角对燃速影响不大,而随着模具压缩比减小,燃速先降低后略微升高,二者对压力指数几乎没有影响;模针与铜套的位置匹配对弧厚差有较大影响,最大间隙差截面与水平截面的夹角β为70°~90°时,模针与铜套达到最佳匹配位置。 展开更多
关键词 管状改性双基推进剂 模具装配参数 弧厚差 出料负荷 燃速
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部