The collected tungsten carbide/cobalt scrapped waste typically contains approximately 90% tungsten carbide and 10% cobalt.A nitric method is used to extract tungsten and cobalt from tungsten-containing waste.The waste...The collected tungsten carbide/cobalt scrapped waste typically contains approximately 90% tungsten carbide and 10% cobalt.A nitric method is used to extract tungsten and cobalt from tungsten-containing waste.The waste is first dissolved in nitric acid,which then makes cobalt soluble and becomes cobalt nitrate solution.The waste also oxidizes tungsten carbide to insoluble tungstenic acid precipitate.If tungsten carbide scraps are obtained from leftover of LCD glass cutting,after applying the same process as above,the remaining glass also needs to be separated from the tungstenic acid.XRF analysis shows that 93.8% of cobalt and 97.72% of tungsten can be obtained separately by this wet chemical method.By ICP analysis,no more tungsten ion remains after 2 h reaction in the cobalt recovery when 12 N of nitric acid is used for oxidation.The recovery materials obtained for tungsten are tungsten oxide and for cobalt a mixture of Co3O4 and CoO.展开更多
One of the serious concerns for tungsten materials in fusion devices is the radiation defects caused by helium plasma irradiation since helium is a fusion product. The fiber-formed nanostructure is thought to have a p...One of the serious concerns for tungsten materials in fusion devices is the radiation defects caused by helium plasma irradiation since helium is a fusion product. The fiber-formed nanostructure is thought to have a possible weakness against the plasma heat flux on the plasma- facing component and also may destroy the reflectivity of optical mirrors. In this paper an inter- esting method for the recovery of such tungsten surfaces is shown. The recovery process depends on the grade and manufacturing process of tungsten materials.展开更多
The macroporous anion exchangers with long-chained cross-linking agents were investigated for the tungsten recovery from salt solutions. The physical-chemical characteristics of these sorbents were studied by means o...The macroporous anion exchangers with long-chained cross-linking agents were investigated for the tungsten recovery from salt solutions. The physical-chemical characteristics of these sorbents were studied by means of sorption-desorption experiment aswell as electron and IR-spectroscopy. The anion exchangers on the basis of macroporous copolymers of methylacrylate and divinyl-ester of diethyleneglycol or tetravinyl-ester of pentaerythritol possess the exchange capacity to tungsten 2--5 times greater than the porous anion exchangers on the basis of styrene and divinylbenzene, therefore they can be used for selective tungsten recovery from comulex salt solutions.展开更多
基金Supported by the project of National Science Council in Taiwan(No.:NSC-95-2622-E-159)
文摘The collected tungsten carbide/cobalt scrapped waste typically contains approximately 90% tungsten carbide and 10% cobalt.A nitric method is used to extract tungsten and cobalt from tungsten-containing waste.The waste is first dissolved in nitric acid,which then makes cobalt soluble and becomes cobalt nitrate solution.The waste also oxidizes tungsten carbide to insoluble tungstenic acid precipitate.If tungsten carbide scraps are obtained from leftover of LCD glass cutting,after applying the same process as above,the remaining glass also needs to be separated from the tungstenic acid.XRF analysis shows that 93.8% of cobalt and 97.72% of tungsten can be obtained separately by this wet chemical method.By ICP analysis,no more tungsten ion remains after 2 h reaction in the cobalt recovery when 12 N of nitric acid is used for oxidation.The recovery materials obtained for tungsten are tungsten oxide and for cobalt a mixture of Co3O4 and CoO.
基金supported by a Grant-in-aid for scientific Research (B) (20360414) from JSPS
文摘One of the serious concerns for tungsten materials in fusion devices is the radiation defects caused by helium plasma irradiation since helium is a fusion product. The fiber-formed nanostructure is thought to have a possible weakness against the plasma heat flux on the plasma- facing component and also may destroy the reflectivity of optical mirrors. In this paper an inter- esting method for the recovery of such tungsten surfaces is shown. The recovery process depends on the grade and manufacturing process of tungsten materials.
文摘The macroporous anion exchangers with long-chained cross-linking agents were investigated for the tungsten recovery from salt solutions. The physical-chemical characteristics of these sorbents were studied by means of sorption-desorption experiment aswell as electron and IR-spectroscopy. The anion exchangers on the basis of macroporous copolymers of methylacrylate and divinyl-ester of diethyleneglycol or tetravinyl-ester of pentaerythritol possess the exchange capacity to tungsten 2--5 times greater than the porous anion exchangers on the basis of styrene and divinylbenzene, therefore they can be used for selective tungsten recovery from comulex salt solutions.