Application Strategies of Shotcrete Anchor Support Technology in Highway Bridge and Tunnel Engineering

This article analyzes the application strategies of shotcrete anchor support technology using a highway bridge-tunnel construction project as an example.The article covers various strategies,including support plan formulation,mortar shotcrete anchor construction,grid steel frame construction,steel mesh construction,and concrete support construction.This analysis aims to provide a guideline for those interested in applying this technology and improving the quality and safety of highway bridges and tunnels construction.

PRESENT SITUATION AND FUTURE PROSPECT OF APPLICATION OF TUNNELING MACHINE TO CHINESE UNDERGROUND ENGINEERING CONSTRUCTION

The application of tunneling machine to Chinese underground engineering construction is outlined,and its future prospect is forecasted in the light of the requirements for Chinese underground engineering construction in the 21st century. Further suggestion is put forward on the effective use of tunneling machine.

Acoustic emission monitoring of rockbursts during TBM-excavated headrace tunneling at Jinping Ⅱ hydropower station

To better understand the mechanical properties of marble at Jinping II hydropower station, this paper examines the changes of brittle rocks in excavation damaged zones(EDZs) before and after excavation of tunnel with the tunnel boring machine(TBM). The paper attempts to employ the acoustic emission(AE) to study the AE characteristics and distribution of rockburst before and after TBM-excavated tunnel. It is known that the headrace tunnel #2, excavated by the drill-and-blast(D&B) method, is ahead of the headrace tunnel #3 that is excavated by TBM method. The experimental sub-tunnel #2–1, about 2000 m in depth and 13 m in diameter, between the two tunnels is scheduled. In the experimental sub-tunnel #2–1, a large number of experimental boreholes are arranged, and AE sensors are installed within 10 m apart from the wall of the headrace tunnel #3. By tracking the microseismic signals in rocks, the location, frequency, quantity, scope and intensity of the microseismic signals are basically identifed. It is observed that the AE signals mainly occur within 5 m around the rock wall, basically lasting for one day before tunnel excavation and a week after excavation. Monitoring results indicate that the rockburst signals are closely related to rock stress adjustment. The rock structure has a rapid self-adjustment capacity before and after a certain period of time during tunneling. The variations of rock stresses would last for a long time before reaching a fnal steady state. Based on this, the site-specifc support parameters for the deep tunnels can be accordingly optimized.

Engineering Geological Classification of Surrounding Rock Stability in Coal Mine Tunnels and Its Engineering Applications

The stability type and spatial distribution of surrounding rock are an important basis for the layout of hae tunuels and the selection of support patterns in a mine design. Based on a lot of investigations and testing studies,a new engineering geological classification scheme of surrounding rock stability is put forward,which is easy to be applied,and reliable verified by examples. According to the classification system,the spatial divisions of surrounding rock stability can be delineated in an exploration progamme, providing relevant engineering geological informations for mine designers to prevent them from making the uurealistic tunnel layout and support

Application Strategy of NDT Technology in Tunnel Engineering Quality Inspection

Nondestructive testing(NDT)is an advanced and commonly used technique in tunnel engineering quality inspection.To achieve good application of nondestructive testing technology,its main application in tunnel engineering quality inspection strategy is analyzed,including the significance of applying nondestructive testing technology in tunnel engineering quality inspection,the main nondestructive testing technology applied in tunnel engineering quality test analysis,and the analysis of nondestructive testing technology of tunnel engineering quality inspection strategy.The analyses in this paper are done in hopes of providing scientific reference for the utilization of NDT technology and the improvement of tunnel engineering quality.

Practice Research on Standardization of Undergraduate Graduation Design of Tunnel and Underground Engineering

Graduation project(thesis)is an important practice part in undergraduate education,which forms an organic whole with theoretical teaching link,and it is the continuation,deepening and examination of the theoretical teaching part.This paper focuses on the constitution that the lack of quality standards for undergraduate graduation design,resulting in different depth and breadth standards;the graduation design materials are scattered and lack of standardization,which leads to the lack of systematic reference materials for students,taking the tunnel and underground engineering major as an example,this paper carries out the practice research on the standardization of the graduation design of tunnel and underground engineering through investigation and combining the teaching resources accumulated in the past decades.Through the study of practice,the content of undergraduate graduation design of tunnel and underground engineering is standardized,the breadth and depth of graduation design is defined,and the“Guide for undergraduate graduation design of tunnel and underground engineering”is organized and compiled,which can provide reference for the standardization and guidance of undergraduate graduation design of tunnel and underground engineering.

Analysis of rockburst in tunnels subjected to static and dynamic loads

The presence of geological structures such as faults, joints, and dykes has been observed near excavation boundaries in many rockburst case histories. In this paper, the role of discontinuities around tunnels in rockburst occurrence was studied. For this purpose, the Abaqus explicit code was used to simulate dynamic rock failure in deep tunnels. Material heterogeneity was considered using Python scripting in Abaqus. Rockbursts near fault regions in deep tunnels under static and dynamic loads were studied.Several tunnel models with and without faults were built and static and dynamic loads were used to simulate rock failure. The velocity and the released kinetic energy of failed rocks, the failure zone around the tunnel, and the deformed mesh were studied to identify stable and unstable rock failures. Compared with models without discontinuities, the results showed that the velocity and the released kinetic energy of failed rocks were higher, the failure zone around the tunnel was larger, and the mesh was more deformed in the models with discontinuities, indicating that rock failure in the models with discontinuities was more violent. The modeling results confirm that the presence of geological structures in the vicinity of deep excavations could be one of the major influence factors for the occurrence of rockburst. It can explain localized rockburst occurrence in civil tunnels and mining drifts. The presented methodology in this paper for rockburst analysis can be useful for rockburst anticipation and control during mining and tunneling in highly stressed ground.

Studies on the evolution process of rockbursts in deep tunnels

This paper focuses on the evolution processes of different types of rockbursts occurring in deep tunnels. A series of laboratory tests and in-situ monitoring in deep tunnels excavated by tunnel boring machine （TBM） and drill-and-blast （D＆B） method have been conducted to understand the mechanisms and processes of the evolution of different types of rockbursts, including strain rockburst, strain-structure slip rockburst, immediate rockburst and time-delayed rockburst. Three different risk assessment methods are proposed to evaluate the intensity and potential failure depth of rockbursts. These methods can be applied before excavation and the results can be updated according to the real-time information during excavation. Two micro-seismicity based real-time warning systems have been established for predicting various intensities ofrockbursts, such as slight, moderate, intensive and extremely intensive rockbursts. Meanwhile, the probability and intensity of the rockburst are also given. The strategy for excavation and support design has been suggested for various intensities of rockbursts before excavation. The strategy for dynamic control of the rockburst evolution process is also proposed according to the monitoring results. The methodology has been successfully applied to rockburst risk reduction for deep tunnels at Jinping II hydropower project. The results have illustrated the applicability of the proposed methodology and techniques concerning rockbursts.

Practices on rockburst prevention and control in headrace tunnels of Jinping II hydropower station

Rockburst problems induced by high in-situ stresses were prominent during construction of the headrace tunnels of Jinping II hydropower station. The rockbursts occurred in various forms, and it is necessary to take pertinent measures for integrated prevention and control of rockbursts. In view of the rockburst characteristics during tunnel construction of Jinping II hydropower station, the engineering geological conditions were presented, and the features, mechanisms and forms of rockbursts observed during construction were analyzed in detail. A large number of scientific researches, experiments and applications were conducted. Multiple measures were adopted to prevent and control rockbursts, including the prediction and early warning measures, stress relief by blasting in advance, optimized blasting design and optimized tunnel support in the tunnel sections prone to strong rockbursts. The effectiveness of these prevention and control measures was evaluated. Experiences have been accumulated through a great number of helpful explorations and practices for rockburst prevention and control. A comprehensive rockburst prevention and control system has been gradually established.

Quantitative analysis of rockburst for surrounding rocks and zonal disintegration mechanism in deep tunnels

Rock masses without pre-existing macrocracks can usually be considered as granular materials with only microcracks.During the excavation of the tunnels,microcracks may nucleate,grow and propagate through the rock matrix;secondary microcracks may appear,and discontinuous and incompatible deformation of rock masses may occur.The classical continuum elastoplastic theory is not suitable for analyzing discontinuous and incompatible deformation of rock masses.Based on non-Euclidean model of the discontinuous and incompatible deformation of rock masses,the distribution of stresses in the surrounding rock masses in deep tunnels is fluctuant or wave-like.The stress concentration at the tips of microcracks located in vicinity of stress wave crest is comparatively large,which may lead to the unstable growth and coalescence of secondary microcracks,and consequently the occurrence of fractured zones.On the other hand,the stress concentration at the tips of microcracks located around stress wave trough is relatively small,which may lead to the arrest of microcracks,and thus the non-fractured zones.The alternate appearance of stress wave crest and trough thus may induce the alternate occurrence of fractured and non-fractured zones in deep rock masses.For brittle rocks,the dissipated energy of microcrack growth is small,but the elastic strain energy stored in rock masses may be larger than the dissipated energy growths of pre-existing microcracks and secondary microcracks.The sudden release of the residual elastic strain energy may lead to rockburst.Based on this understanding,the criteria of rockburst are established.Furthermore,the relationship between rockbursts and zonal disintegration in the surrounding rock masses around deep tunnels is studied.The influences of the in-situ stresses and the physico-mechanical parameters on the distribution of rockburst zones and the ejection velocity of rock fragments are investigated in detail.

Formation mechanism of rockburst in deep tunnel adjacent to faults:Implication from numerical simulation and microseismic monitoring

Rockbursts were frequently encountered in the construction of deeply buried tunnels at the Jinping-II hydropower station, Southwest China. In those cases, the existence of large structural planes, such as faults, was usually observed near the excavation boundaries. The formation mechanism of the “11·28” rockburst, which was a typical rockburst and occurred in a drainage tunnel under a deep burial depth, high in-situ stress state and complex geological conditions, has been difficult to explain. Realistic failure process analysis(RFPA3D) software was adopted to numerically simulate the whole failure process of the surrounding rock mass around the tunnel subjected to excavation. The spatial distribution of acoustic emission derived from numerical simulation contributed to explaining the mechanical responses of the process. Analyses of the stress, safety reserve coefficient and damage degree were performed to reveal the effect of faults on the formation of rockbursts in the deep tunnel. The existence of faults results in the formation of stress anomaly areas between the tunnel and the fault. The surrounding rock mass failure propagates toward the fault from the initial failure, to different degrees. The relative positions and angles of faults play significant roles in the extent and development of surrounding rock mass failure, respectively. The increase in the lateral stress coefficient leads to the aggravation of the surrounding rock mass damage, especially in the roof and floor of the tunnel. Moreover, as the rock strength-stress ratio increases, the failure mode of the near-fault tunnel gradually changes from the stress-controlled type to the compound-controlled type. These findings were consistent with the microseismic monitoring results and field observations, which was helpful to understand the mechanical behavior of tunnel excavation affected by faults. The achievements of this study can provide some references for analysis of the failure mechanisms of similar deep tunnels.

Experimental investigation on influence of loading rate on rockburst in deep circular tunnel under true-triaxial stress condition

To investigate the influence of loading rate on rockburst in a circular tunnel under three-dimensional stress conditions,the true-triaxial tests were conducted on 100 mm×100 mm×100 mm cubic sandstone specimens with d50 mm circular perforated holes,and the failure process of hole sidewall was monitored and recorded in real-time by the microcamera.The loading rates were 0.02,0.10,and 0.50 MPa/s.The test results show that the rockburst process of hole sidewall experienced calm period,pellet ejection period,rock fragment exfoliation period and finally formed the V-shaped notch.The rockburst has a time lag and vertical stress is high when the rockburst occurs.The vertical stress at the initial failure of the hole sidewall increases with loading rate.During the same period after initial failure,the rockburst severity of hole sidewalls increased significantly with increasing loading rate.When the vertical stress is constant and maintains a high stress level,the rockburst of hole sidewall under low loading rate is more serious than that under high loading rate.With increasing loading rate,the quality of rock fragments produced by the rockburst decreases,and the fractal dimension of rock fragments increases.

Excavation-induced microseismicity and rockburst occurrence:Similarities and differences between deep parallel tunnels with alternating soft-hard strata

Excavation-induced microseismicity and rockburst occurrence in deep underground projects provide invaluable information that can be used to warn rockburst occurrence,facilitate rockburst mitigation procedures,and analyze the mechanisms responsible for their occurrence.Based on the deep parallel tunnels with the maximum depth of 1890 m created as part of the Neelum–Jhelum hydropower project in Pakistan,similarities and differences on excavation-induced microseismicity and rockburst occurrence between parallel tunnels with soft and hard alternant strata are studied.Results show that a large number of microseismic(MS)events occurred in each of the parallel tunnels during excavation.Rockbursts occurred most frequently in certain local sections of the two tunnels.Significant differences are found in the excavation-induced microseismicity(spatial distribution and number of MS events,distribution of MS energy,and pattern of microseismicity variation)and rockbursts characteristics(the number and the spatial distribution)between the parallel tunnels.Attempting to predict the microseismicity and rockburst intensities likely to be encountered in subsequent tunnel based on the activity encountered when the parallel tunnel was previously excavated will not be an easy or accurate procedure in deep tunnel projects involving complex lithological conditions.

Fisher discriminant analysis model and its application for prediction of classification of rockburst in deep-buried long tunnel

A Fisher discriminant analysis （FDA） model for the prediction of classification of rockburst in deep-buried long tunnel was established based on the Fisher discriminant theory and the actual characteristics of the project. First, the major factors of rockburst, such as the maximum tangential stress of the cavern wall σθ, uniaxial compressive strength σc, uniaxial tensile strength or, and the elastic energy index of rock Wet, were taken into account in the analysis. Three factors, Stress coefficient σθ/σc, rock brittleness coefficient σc/σt, and elastic energy index Wet, were defined as the criterion indices for rockburst prediction in the proposed model. After training and testing of 12 sets of measured data, the discriminant functions of FDA were solved, and the ratio of misdiscrimina- tion is zero. Moreover, the proposed model was used to predict rockbursts of Qinling tunnel along Xi＇an-Ankang railway. The results show that three forecast results are identical with the actual situation. Therefore, the prediction accuracy of the FDA model is acceptable.

A new empirical chart for rockburst analysis in tunnelling:Tunnel rockburst classification(TRC)

Rockburst is defined as a phenomenon with immediate dynamic instability under excavation unloading conditions of deep or high geostress areas.Inadequate knowledge and lack of characterizing information prevent engineers and experts from achieving appropriate prediction results related to the rockburst behaviour.In this study,a data set including 220 rockburst instances was collected for rockburst classification via the geostatistical method.An update of the 2D graph,the tunnel rockburst classification(TRC)chart,was introduced based on analysing three indicators,namely,elastic energy index(Wet),tangential stress in rock mass(σ_(0)),and uniaxial compressive strength(σ_(c)).Distribution and correlation of data were drawn on 2D plot,and the boundaries of rockburst were distinguished according to the achieved interpolate points by kriging method.Hierarchically,the validation phase was performed using an additional set of 28 case histories obtained from several projects around the world.The results showed that the TRC chart with an average error percentage of 3.6%in the prediction of rockburst had a significant and effective implementation in comparison to the exiting heuristic systems.Despite the initial character of the prediction,the described chart may be a helpful tool in the first steps of design and construction.

Effect of layered joints on rockburst in deep tunnels

The existence of joints in the surrounding rock mass has a considerable efect on tunnel rockbursts.Herein,we studied the efect of layered joints with diferent inclination angles and spacings on rockburst in deep tunnels and investigated the failure area,deformation process of the surrounding rock mass,stress change inside the surrounding rock mass,velocity of the failed rock,and the kinetic energy of the failure.The failure type of the surrounding rock mass can thus be determined.The results showed that the intensity of rockburst increases as rock quality designation(RQD)decreases,while the deformation rate of the surrounding rock mass frst increases and then decreases.The deformation rate exhibits a turning point between RQD=50 and 70,below which the deformation rate of the surrounding rock mass gradually decreases,ultimately ceasing to be a rockburst.Rockburst always occurs perpendicular to the direction of the joint.Whenσ_(x)=σ_(y),as the joint inclination angle changes from 45°to 90°,the intensity of a rockburst frst decreases(from 45°to 60°),and then increases(from 60°to 90°).When combined with the evolution law of stress and strain energy,the rockburst process can be divided into four stages.

Rockburst process and strength-weakening effect of the high-stress circular tunnel under internal unloading

To investigate the influence of unloading effect of a circular tunnel face on rockburst process,by innovatively combining rock drilling unloading devices and triaxial systems,the strain rockburst simulation under the entire stress path of“high initial stressþinternal unloadingþstress adjustment”(HUS test)was realized for the intact cubic red sandstone samples(100 mm×100 mm×100 mm).Comparative tests were conducted on cubic red sandstone samples with prefabricated circular holes(425 mm)under the stress path of“prefabricated circular hole+þhigh initial stress+stress adjustment”(PHS test),thereby highlighting the influence of internal unloading on rockburst failure.The test results revealed that with an increase in vertical stress,the sidewalls in both the HUS and PHS tests suffered strain rockburst failure.Compared with the PHS test,the initial failure stress in the HUS test is lower,and it is easier to induce sidewall rockbursts.This indicates that the internal unloading influences the sidewall failure,causing an obvious strength-weakening effect,which becomes more significant with an increase in buried depth.The strain rockburst failure was more severe in the HUS test owing to the influence of internal unloading.V-shaped rockburst pits were formed in the HUS tests,whereas in the PHS test,arcshaped rockburst pits were produced.It was also found that strain rockburst failure may occur only when the rock has a certain degree of rockburst proneness.

MECHANISM AND CATASTROPHE THEORY ANALYSIS OF CIRCULAR TUNNEL ROCKBURST

Mechanism of circular tunnel rockburst is that, when the carrying capacity of the centralized zone of plastic deformation in limiting state reduces, the comparatively intact part in rock mass unloads by way of elasticity; rockburst occurs immediately when the elastic energy released by the comparatively intact part exceeds the energy dissipated by plastic deformation. The equivalent strain was taken as a state variable to establish a catastrophe model of tunnel rockburst, and the computation expression of the earthquake energy released by tunnel rockburst was given. The analysis shows that, the conditions of rockburst occurrence are relative to rock＇s ratio of elastic modulus to descendent modulus and crack growth degree of rocks; to rock mass with specific rockburst tendency, there exists a corresponding critical depth of softened zone, and rockburst occurs when the depth of softened zone reaches.

New developments of technology in rock engineering in China

In terms of rock engineering and technology in hydropower construction,the slope stability and monitoring techniques for high slopes of Three Gorges Project,the stability and support technology for high slopes of hydropower projects in deep river valley,the stabilization techniques for underground cavern group with large span and high side walls are introduced in this paper.As for rock engineering and technology in highway and railway construction,the Qinghai-Tibet Railway — new construction techniques in permafrost,the support techniques for large squeezing deformation in Wuqiaoling Tunnel,the construction techniques for tunnels in alpine and high-altitude region,the geological prediction techniques for tunnels in karst region,the microseismic monitoring and early warning techniques for rockbursts in deep and long tunnels are presented.For rock engineering and technology inmining engineering,the innovative techniques for roadway support inmines,the simultaneous extraction technique of pillarless coal and gas in coal seams with low permeability,the safe and efficient deep openmining technology,advances in monitoring,early warning and treatment ofmine dynamic disasters are discussed.In addition,the new anchorage techniques and precision blasting technique in rock engineering are introduced.

Recent advances of digitization in rock mechanics and rock engineering

In recent years, there are growing demands of representing rock mechanics and rock engineering in a digital format that can be easily managed, manipulated, analyzed and shared. The objective of this paper is to give a comprehensive review of the status quo and future trends of digitization in rock mechanics and rock engineering. Research topics essential to the process of digitization are firstly discussed, including data acquisition, data standardization, geological modeling, visualization and digital-numerical integration. New techniques that will play an important role in digitization process but require further improvement are then briefly proposed. Finally, achievements of present methods and techniques for digitization in substantial rock mechanics and rock engineering are presented.