We combine the Turbo codes with differential frequency hopping (DFH) technique and propose a new technique called Turbo-DFH coding. The structures of Turbo-DFH encoder and decoder are given. Taking aim at characterist...We combine the Turbo codes with differential frequency hopping (DFH) technique and propose a new technique called Turbo-DFH coding. The structures of Turbo-DFH encoder and decoder are given. Taking aim at characteristic of Turbo-DFH system, the modified Log-MAP algorithm is presented and used for iterative decoding of Turbo-DFH decoder. Simulation results show that because the ideas of random coding and iterative decoding are used, the bit error rate (BER) performance of the Turbo-DFH system is better than that of the conventional DFH system.展开更多
Coding techniques have always been a major area of scientific interest. Due to this interest, many coding schemes were invented. Eventually, their implementation in various systems contributed in the evolvement of Wir...Coding techniques have always been a major area of scientific interest. Due to this interest, many coding schemes were invented. Eventually, their implementation in various systems contributed in the evolvement of Wireless Communications. A breakthrough was definitely Turbo coding. Particularly, the concept of joining two or more convolutional encoders in parallel (PCCC) or in serial (SCCC), along with the iterative decoding technique, literally raised the expectations of the anticipated BER performance. In fact, Concatenated Convolutional Codes clearly outperform convolutional codes. Moreover, various systems, either under development or either for future use, will have high standards. The previous systems should present exceptional tolerance of noise effects and consequently a low overall number of received errors. For this purpose a new PCCC design was developed. The system’s performance analysis, using an AWGN channel, showed better results for various iterations compared to other schemes such as typical PCCC, SCCC and finally a Convolutional encoder with a Viterbi decoder.展开更多
In this paper,we study turbo codes from the digital signal processing point of view by defining turbo codes over the complex field.It is known that iterative decoding and interleaving between concatenated parallel cod...In this paper,we study turbo codes from the digital signal processing point of view by defining turbo codes over the complex field.It is known that iterative decoding and interleaving between concatenated parallel codes are two key elements that make turbo codes perform significantly better than the conventional error control codes.This is analytically illustrated in this paper.We show that the decoded noise mean power in the iterative decoding decreases when the number of iterations increases,as long as the interleaving decorrelates the noise after each iterative decoding step.An analytic decreasing rate and the limit of the decoded noise mean power are given.The limit of the decoded noise mean power of the iterative decoding of a turbo code with two parallel codes with their rates less than 1/2 is one third of the noise power before the decoding,which can not be achieved by any non-turbo codes with the same rate.From this study,the role of designing a good interleaver can also be clearly seen.展开更多
It is well known that turbo decoding always begins from the first component decoder and supposes that the apriori information is '0' at the first iterative decoding. To alternatively start decoding at two comp...It is well known that turbo decoding always begins from the first component decoder and supposes that the apriori information is '0' at the first iterative decoding. To alternatively start decoding at two component decoders, we can gain two soft output values for the received observation of an input bit. It is obvious that two soft output values comprise more sufficient extrinsic information than only one output value obtained in the conventional scheme since different start points of decoding result in different combinations of the a priori information and the input codewords with different symbol orders due to the permutation of an interleaver. Summarizing two soft output values for erery bit before making hard decisions, we can correct more errors due to their complement. Consequently, turbo codes can achieve better error correcting performance than before in this way. Simulation results show that the performance of turbo codes using the novel proposed decoding scheme can get a growing improvement with the increment of SNR in general compared to the conventional scheme. When the bit error probability is 10-5 , the proposed scheme can achieve 0.5 dB asymptotic coding gain or so under the given simulation conditions.展开更多
In this paper, the iterative Vertical-Bell-lab Layered Space-Time (V-BLAST) decoding algorithm of an Adaptive Modulation and Coding (AMC) system is proposed, and the corresponding MIMO scheme is analyzed. The proposed...In this paper, the iterative Vertical-Bell-lab Layered Space-Time (V-BLAST) decoding algorithm of an Adaptive Modulation and Coding (AMC) system is proposed, and the corresponding MIMO scheme is analyzed. The proposed decoding algorithm adopts iteratively extrinsic information from a Maximum A Posteriori (MAP) decoder as an a priori probability in the two decoding procedures of the V-BLAST scheme of ordering and slicing in an AMC system. Furthermore, the performance of the proposed decoding algorithm is compared with that of a conventional V-BLAST decoding algorithm and a Maximum Likelihood (ML) decoding algorithm in the combined system of an AMC scheme and a V-BLAST scheme. In this analysis, each MIMO schemes are assumed to be parts of the system for performance improvement.展开更多
Multiple antenna wireless systems can provide larger channel capacity and enable spatial diversity to combat fading. In this paper we conduct an investigation into the design of coded space-time system obtained by ser...Multiple antenna wireless systems can provide larger channel capacity and enable spatial diversity to combat fading. In this paper we conduct an investigation into the design of coded space-time system obtained by serially concatenating channel code module and space-time code module with an interleaver in between. As an example, the system is constructed by employing low decoding complexity turbo-SPC （single parity check） code as outer module and linear complex field space-time code as inner module, which achieves full diversity and lossless equivalent channel capacity. Simulation results prove that our designed system performs well and it only loses 0.8 dB from multiple-input multiple-output （MIMO） capacity at BER = 10^-5 in the case of information bit length 6048. Compared with turbo code-based systems, it also has lower error floor.展开更多
The paper presents a kind of reasonable structure for implementing MQAM T-TCM based on the principles of turbo codes and TCM for the first time. It can also be expanded to PSK T-TCM system, and the corresponding decod...The paper presents a kind of reasonable structure for implementing MQAM T-TCM based on the principles of turbo codes and TCM for the first time. It can also be expanded to PSK T-TCM system, and the corresponding decoding algorithm is derived. By computer simulation,its performance is analyzed. The results show that T-TCM takes the advantages of turbo codes and TCM technology, and is a kind of bandwidth-efficient coded-modulation technique obtaining high coding gain. So, in the future, T-TCM would be applied in many fields.展开更多
文摘We combine the Turbo codes with differential frequency hopping (DFH) technique and propose a new technique called Turbo-DFH coding. The structures of Turbo-DFH encoder and decoder are given. Taking aim at characteristic of Turbo-DFH system, the modified Log-MAP algorithm is presented and used for iterative decoding of Turbo-DFH decoder. Simulation results show that because the ideas of random coding and iterative decoding are used, the bit error rate (BER) performance of the Turbo-DFH system is better than that of the conventional DFH system.
文摘Coding techniques have always been a major area of scientific interest. Due to this interest, many coding schemes were invented. Eventually, their implementation in various systems contributed in the evolvement of Wireless Communications. A breakthrough was definitely Turbo coding. Particularly, the concept of joining two or more convolutional encoders in parallel (PCCC) or in serial (SCCC), along with the iterative decoding technique, literally raised the expectations of the anticipated BER performance. In fact, Concatenated Convolutional Codes clearly outperform convolutional codes. Moreover, various systems, either under development or either for future use, will have high standards. The previous systems should present exceptional tolerance of noise effects and consequently a low overall number of received errors. For this purpose a new PCCC design was developed. The system’s performance analysis, using an AWGN channel, showed better results for various iterations compared to other schemes such as typical PCCC, SCCC and finally a Convolutional encoder with a Viterbi decoder.
文摘In this paper,we study turbo codes from the digital signal processing point of view by defining turbo codes over the complex field.It is known that iterative decoding and interleaving between concatenated parallel codes are two key elements that make turbo codes perform significantly better than the conventional error control codes.This is analytically illustrated in this paper.We show that the decoded noise mean power in the iterative decoding decreases when the number of iterations increases,as long as the interleaving decorrelates the noise after each iterative decoding step.An analytic decreasing rate and the limit of the decoded noise mean power are given.The limit of the decoded noise mean power of the iterative decoding of a turbo code with two parallel codes with their rates less than 1/2 is one third of the noise power before the decoding,which can not be achieved by any non-turbo codes with the same rate.From this study,the role of designing a good interleaver can also be clearly seen.
文摘It is well known that turbo decoding always begins from the first component decoder and supposes that the apriori information is '0' at the first iterative decoding. To alternatively start decoding at two component decoders, we can gain two soft output values for the received observation of an input bit. It is obvious that two soft output values comprise more sufficient extrinsic information than only one output value obtained in the conventional scheme since different start points of decoding result in different combinations of the a priori information and the input codewords with different symbol orders due to the permutation of an interleaver. Summarizing two soft output values for erery bit before making hard decisions, we can correct more errors due to their complement. Consequently, turbo codes can achieve better error correcting performance than before in this way. Simulation results show that the performance of turbo codes using the novel proposed decoding scheme can get a growing improvement with the increment of SNR in general compared to the conventional scheme. When the bit error probability is 10-5 , the proposed scheme can achieve 0.5 dB asymptotic coding gain or so under the given simulation conditions.
文摘In this paper, the iterative Vertical-Bell-lab Layered Space-Time (V-BLAST) decoding algorithm of an Adaptive Modulation and Coding (AMC) system is proposed, and the corresponding MIMO scheme is analyzed. The proposed decoding algorithm adopts iteratively extrinsic information from a Maximum A Posteriori (MAP) decoder as an a priori probability in the two decoding procedures of the V-BLAST scheme of ordering and slicing in an AMC system. Furthermore, the performance of the proposed decoding algorithm is compared with that of a conventional V-BLAST decoding algorithm and a Maximum Likelihood (ML) decoding algorithm in the combined system of an AMC scheme and a V-BLAST scheme. In this analysis, each MIMO schemes are assumed to be parts of the system for performance improvement.
基金supported by the National Natural Science Foundation of China （Grant Nos.60332030, 60572157）, and the National High-TechnologY Research and Development of China （Grant No.863-2003AA123310）
文摘Multiple antenna wireless systems can provide larger channel capacity and enable spatial diversity to combat fading. In this paper we conduct an investigation into the design of coded space-time system obtained by serially concatenating channel code module and space-time code module with an interleaver in between. As an example, the system is constructed by employing low decoding complexity turbo-SPC （single parity check） code as outer module and linear complex field space-time code as inner module, which achieves full diversity and lossless equivalent channel capacity. Simulation results prove that our designed system performs well and it only loses 0.8 dB from multiple-input multiple-output （MIMO） capacity at BER = 10^-5 in the case of information bit length 6048. Compared with turbo code-based systems, it also has lower error floor.
文摘The paper presents a kind of reasonable structure for implementing MQAM T-TCM based on the principles of turbo codes and TCM for the first time. It can also be expanded to PSK T-TCM system, and the corresponding decoding algorithm is derived. By computer simulation,its performance is analyzed. The results show that T-TCM takes the advantages of turbo codes and TCM technology, and is a kind of bandwidth-efficient coded-modulation technique obtaining high coding gain. So, in the future, T-TCM would be applied in many fields.
