Analysis on the turning point of dynamic in-plane compressive strength for a plain weave composite

Experimental investigations on dynamic in-plane compressive behavior of a plain weave composite were performed using the split Hopkinson pressure bar. A quantitative criterion for calculating the constant strain rate of composites was established. Then the upper limit of strain rate, restricted by stress equilibrium and constant loading rate, was rationally estimated and confirmed by tests. Within the achievable range of 0.001/s-895/s, it was found that the strength increased first and subsequently decreased as the strain rate increased. This feature was also reflected by the turning point(579/s) of the bilinear model for strength prediction. The transition in failure mechanism, from local opening damage to completely splitting destruction, was mainly responsible for such strain rate effects. And three major failure modes were summarized under microscopic observations: fiber fracture, inter-fiber fracture, and interface delamination. Finally, by introducing a nonlinear damage variable, a simplified ZWT model was developed to characterize the dynamic mechanical response. Excellent agreement was shown between the experimental and simulated results.

Evolution and Prospects of Russia’s“Turn to the East”

With the escalation of the Ukraine crisis,Russia’s policy of“Turn to the East”has evolved into“Turn to the Non-West”at an accelerated pace.Involving both a shift of focus in diplomacy and economics and the“de-Westernization”in financial and ideological areas,it has become a strategy to break through Western diplomatic and economic blockade.The transition will continue in the medium term,but adjustments or twists and turns are likely under the influence of internal and external factors.

Despite being negative, the indicators for business situation and order intake improved in January 2024

The last ITMF Global Textile Industry Survey(GTIS) was conducted in January 2024.It revealed a significant improvement in the business climate,signaling a potential turning point driven by better inflation rates,increased real wages,and consumer sentiment in the USA,alongside expectations of interest rate cuts.Business expectations for July 2024 reached a peak unmet since late 2021,fueled by improved order intakes and a more optimistic consumer demand outlook,despite ongoing cost concerns.Order intake began showing recovery signs,with notable increases across regions except East Asia,particularly in North&Central America and South America.

TURNING LIGNIN INTO VALUABLE PRODUCTS

In a study published in Nature Catalysis on May 28,Chinese scientists unveiled a nove l approach to transforming lignin,a major component of woody biomass,into valuable chemical products(doi:10.1038/s41929-024-01165-w).This discovery could pave the way for more sustainable and efficient use of renewable resources.

Analyzing the Effects of Tool Holder Stiffness on Chatter Vibration Reduction in Turning

This paper investigates the effects of tool holder materials on chatter vibration in turning operations.The study uses a complex dynamic turning model with two degrees of freedom for the orthogonal cutting system.Tool holders made from different materials,including Al 5083,Al 6082,Al 7012,and a standard 4140 material,were subjected to chatter vibration to investigate their process damping capabilities.The study found that the standard tool holder 4140 allows for higher stable depths of cut and produces similar process damping values compared to the other tool holders.Finite element analyses(FEA)were performed to verify the experimental results,and the modal and FEA analyses produced very similar results.The study concludes that future research should investigate the effects of tool holders made from high alloy steel alloys on process damping.Overall,this paper provides important insights into the effects of tool hold-er materials on chatter vibration and process damping in turning operations,which can help in the design of more effi-cient and effective cutting systems.

Vehicle Motion Prediction at Intersections Based on the Turning Intention and Prior Trajectories Model

Intersections are quite important and complex traffic scenarios,where the future motion of surrounding vehicles is an indispensable reference factor for the decision-making or path planning of autonomous vehicles.Considering that the motion trajectory of a vehicle at an intersection partly obeys the statistical law of historical data once its driving intention is determined,this paper proposes a long short-term memory based(LSTM-based)framework that combines intention prediction and trajectory prediction together.First,we build an intersection prior trajectories model(IPTM)by clustering and statistically analyzing a large number of prior traffic flow trajectories.The prior trajectories model with fitted probabilistic density is used to approximate the distribution of the predicted trajectory,and also serves as a reference for credibility evaluation.Second,we conduct the intention prediction through another LSTM model and regard it as a crucial cue for a trajectory forecast at the early stage.Furthermore,the predicted intention is also a key that is associated with the prior trajectories model.The proposed framework is validated on two publically released datasets,next generation simulation(NGSIM)and INTERACTION.Compared with other prediction methods,our framework is able to sample a trajectory from the estimated distribution,with its accuracy improved by about 20%.Finally,the credibility evaluation,which is based on the prior trajectories model,makes the framework more practical in the real-world applications.

Investigations on spectroscopic parameters, vibrational levels, classical turning points and inertial rotation and centrifugal distortion constants for the 1 ＋ X^1∑g^＋ state of sodium dimer

The density functional theory （B3LYP, B3P86） and the quadratic configuration-interaction method including single and double substitutions （QCISD（T）, QCISD） presented in Gaussian03 program package are employed to calculate the equilibrium internuclear distance Re, the dissociation energy De and the harmonic frequency We for the XIEg＋ state of sodium dimer in a number of basis sets. The conclusion is gained that the best Re, De and We results can be attained at the QCISD/6-311G（3df,3pd） level of theory. The potential energy curve at this level of theory for this state is obtained over a wide internuclear separation range from 0.16 to 2.0 nm and is fitted to the analytic Murrell-Sorbie function. The spectroscopic parameters De, DO, Re, ωe, ωe Xe, αe and Be are calculated to be 0.7219 eV, 0.7135 eV, 0.31813 nm, 151.63 cm^-1, 0.7288 cm^-1, 0.000729 cm^-1 and 0.1449 cm^-1, respectively, which are in good agreement with the measurements. With the potential obtained at the QCISD/6-311G（3df,3pd） level of theory, a total of 63 vibrational states is found when J = 0 by solving the radial SchrSdinger equation of nuclear motion. The vibrational level, corresponding classical turning point and inertial rotation constant are computed for each vibrational state. The centrifugal distortion constants （Dr Hv, Lv, Mv, Nv and Ov） are reported for the first time for the first 31 vibrational states when J = 0.

The summer solstice is the turning point when light and temperature affect the growth of trees

The interaction between light and temperature is known to influence the seasonal growth of trees.Traditional studies on"light"primarily focus on day length,specifically short day(SD)or long day(LD)conditions.However,little research has been conducted on the process of transitioning between SD and LD conditions.

Design of a coated thinly clad chalcogenide long-period fiber grating refractive index sensor based on dual-peak resonance near the phase matching turning point

A novel method for designing chalcogenide long-period fiber grating(LPFG) sensors based on the dual-peak resonance effect of the LPFG near the phase matching turning point(PMTP) is presented. Refractive index sensing in a high-refractive-index chalcogenide fiber is achieved with a coated thinly clad film. The dual-peak resonant characteristics near the PMTP and the refractive index sensing properties of the LPFG are analyzed first by the phase-matching condition of the LPFG. The effects of film parameters and cladding radius on the sensitivity of refractive index sensing are further discussed. The sensor is optimized by selecting the appropriate film parameters and cladding radius. Simulation results show that the ambient refractive index sensitivity of a dual-peak coated thinly clad chalcogenide LPFG at the PMTP can be 2400 nm/RIU, which is significantly higher than that of non-optimized gratings. It has great application potential in the field of chemical sensing and biosensors.

Returning Chinese school-aged children and adolescents to physical activity in the wake of COVID-19: Actions and precautions

The Coronavirus disease-2019(COVID-19)pandemic is still spreading globally.As of April 7,2020,it has reached 184 countries and territories,infecting more than 1.4 million people worldwide with more than 82,000 deaths.1 The situation in China has improved significantly since December 31,2019.2 Owing to the unprecedented and effective quarantine measures taken across the country,Chinese health authorities reported on March 18,2020,that for the first time since the outbreak no new locally transmitted COVID-19 cases had been reported,marking a major turning point in the fight against the highly contagious coronavirus.3 Since then,the daily number of new cases in the mainland of China has dropped to double digits,with new infections primarily originating from incoming air passengers from outside China.

Join Hands on the Path Towards Modernization

Leaders of political parties from around the world,Ladies and Gentlemen,Friends,It gives me great pleasure to join all of you for the discussion on “Path Towards Modernization: The Responsibility of Political Parties”.The history of human development is full of twists and turns. Similarly, the journey of each country to explore the path to modernization is also arduous. In today’s world。

Kong Hongwei:Tellingthe Story of China to the World with Chinese National Jazz

On May 31,the 2023 Taihu Jazz Music Festival ended.Since its opening on May 26,12 well-.known jazz bands and more than 100 domestic and foreign musicians have taken turns to play the most representative jazz works from the United States,France,Australia,Japan and other countries.Using music as a common language,they carry out dialogue between difterent cultures.

DE-DOLLARIZATION IS TRENDING AND THERE'S NO TURNING BACK

The U.S.dollar has long stood tall as the pre-eminent global currency for international cross-border trade settlements and foreign exchange reserves ever since the launch of the Bretton Woods institutions-International Monetary Fund(IMF)and World Bank(WB).

Case Retrieval Strategy of Turning Process Based on Grey Relational Analysis

To solve the problem of long response time when users obtain suitable cutting parameters through the Internet based platform,a case-based reasoning framework is proposed.Specifically,a Hamming distance and Euclidean distance combined method is designed to measure the similarity of case features which have both numeric and category properties.In addition,AHP(Analytic Hierarchy Process)and entropy weight method are integrated to provide features weight,where both user preferences and comprehensive impact of the index have been concerned.Grey relation analysis is used to obtain the similarity of a new problem and alternative cases.Finally,a platform is also developed on Visual Studio 2015,and a case study is demonstrated to verify the practicality and efficiency of the proposed method.This method can obtain cutting parameters which is suitable without iterative calculation.Compared with the traditional PSO(Particle swarm optimization algorithm)and GA(Genetic algorithm),it can obtain faster response speed.This method can provide ideas for selecting processing parameters in industrial production.While guaranteeing the characteristic information is similar,this approach can select processing parameters which is the most appropriate for the production process and a lot of time can be saved.

Tool path generation of ultra-precision diamond turning: A state-of-the-art review

With the increasing market demand for optical complex surface parts,the application of multi-axis ultraprecision single-point diamond turning is increasing.A tool path generation method is very important to decrease manufacturing time,enhance surface quality,and reduce cost.Compared with the tool path generation of the traditional multi-axis milling,that of the ultra-precision single-point diamond turning requires higher calculation accuracy and efficiency.This paper reviews the tool path generation of ultra-precision diamond turning,considering several key issues:cutter location(CL)points calculation,the topological form of tool path,interpolation mode,and G code optimization.

A COMPLETE EXPRESSION OF THE ASYMPTOTIC SOLUTION OF DIFFERENTIAL EQUATION WITH THREE_TURNING POINTS

In this paper, a second order linear ordinary differential equation with three-turning points is studied. This equation is as follows (dx2)/(d2y) + [lambda(2)q(1)(x) + lambda q(2)(x, lambda)]y = 0, where q(1) (x) = (x - mu(1))(x - mu(2))(x - mu(3))f(x), f(x) not equal 0, mu(1) < mu(2) < mu(3) and lambda is a large parameter, but q(2)(x, lambda) = Sigma(i = 0)(epsilon a) g(i)(x)lambda(-i) (here g(0)(x) not equivalent to 0). By using JL function, the complete expression of the formal uniformly, valid asymptotic solutions of the equation near turning point is obtained.

Research on the Seebeck effect in efficient turning process and improving tool life

In this paper, for the tool wear problem of the cutting process, the study on improving tool life has been done through the analysis of the Seebeck effect in the efficient turning process. The generation principle of the self-excited electric current in the cutting process is studied, and also its effect on the life of the turning cutter is studied, so as to reveal the mechanism of the self-excited electric current accelerating the wear of cutting tools. The study results show that the self-excited electric current which is generated during the cutting process is one of the main reasons that cause both the accelerated hardening and the low life of cutting tools to happen. Thus, if the generation of self-excited current is avoided and reduced, the cutting performance of cutting tools can be effectively improved, so to improve the tool life. The study can provide the anti-friction and anti-wear theory basis for the design of the efficient cutting tools.

Econometric Analysis of Research Papers on the Project of " Turning Vulnerable Farmland into Forests "

Taking the Database of Chinese Scientific and Technical Periodicals of Chongqing VIP Information Co. ,Ltd. as the statistical analysis source,we analyze the inter-annual trends,the authors institutions,journals distribution,disciplines distribution,paper subjects and authors' cooperation of research papers on the project of " turning vulnerable farmland into forests" in China during the period 1999 -2010,using the bibliometric method. The results show that during the period 1999 -2010,the research on the project of " turning vulnerable farmland into forests" always captured the attention of academia,and the number of research papers annually averaged more than 300; the relevant forestry functional departments at all levels,forestry-related research institutions and universities have paid close attention to the project of " turning vulnerable farmland into forests" in China; the group of core journals researched is concentrated in journals concerning forestry; in addition to forestry and agriculture,the research areas also touch upon economics,environment and other disciplines; the emphasis and hot spot of research are centered on applications, with few basic researches.

A COMPLETE EXPRESSION OF THE ASYMPTOTIC SOLUTION OF DIFFERENTIAL EQUATION WITH A∩-TH ORDER TURNING POINT

A second order linear ordinary differential equation has been studied,and thecomplete expression.of the formal uniformly valid asymptotic solutions to the equationnear turning point is obtained by using extended Airy function.

The Effect of Tool Construction and Cutting Parameters on Surface Roughness and Vibration in Turning of AISI 1045 Steel Using Taguchi Method

This paper presents an experimental investigation focused on identifying the effects of cutting conditions and tool construction on the surface roughness and natural frequency in turning of AISI1045 steel. Machining experiments were carried out at the lathe using carbide cutting insert coated with TiC and two forms of cutting tools made of AISI 5140 steel. Three levels for spindle speed, depth of cut, feed rate and tool overhang were chosen as cutting variables. The Taguchi method L9 orthogonal array was applied to design of experiment. By the help of signal-to-noise ratio and analysis of variance, it was concluded that spindle speed has the significant effect on the surface roughness, while tool overhang is the dominant factor affecting natural frequency for both cutting tools. In addition, the optimum cutting conditions for surface roughness and natural frequency were found at different levels. Finally, confirmation experiments were conducted to verify the effectiveness and efficiency of the Taguchi method in optimizing the cutting parameters for surface roughness and natural frequency.