Case Retrieval Strategy of Turning Process Based on Grey Relational Analysis

To solve the problem of long response time when users obtain suitable cutting parameters through the Internet based platform,a case-based reasoning framework is proposed.Specifically,a Hamming distance and Euclidean distance combined method is designed to measure the similarity of case features which have both numeric and category properties.In addition,AHP(Analytic Hierarchy Process)and entropy weight method are integrated to provide features weight,where both user preferences and comprehensive impact of the index have been concerned.Grey relation analysis is used to obtain the similarity of a new problem and alternative cases.Finally,a platform is also developed on Visual Studio 2015,and a case study is demonstrated to verify the practicality and efficiency of the proposed method.This method can obtain cutting parameters which is suitable without iterative calculation.Compared with the traditional PSO(Particle swarm optimization algorithm)and GA(Genetic algorithm),it can obtain faster response speed.This method can provide ideas for selecting processing parameters in industrial production.While guaranteeing the characteristic information is similar,this approach can select processing parameters which is the most appropriate for the production process and a lot of time can be saved.

Analysis on the turning point of dynamic in-plane compressive strength for a plain weave composite

Experimental investigations on dynamic in-plane compressive behavior of a plain weave composite were performed using the split Hopkinson pressure bar. A quantitative criterion for calculating the constant strain rate of composites was established. Then the upper limit of strain rate, restricted by stress equilibrium and constant loading rate, was rationally estimated and confirmed by tests. Within the achievable range of 0.001/s-895/s, it was found that the strength increased first and subsequently decreased as the strain rate increased. This feature was also reflected by the turning point(579/s) of the bilinear model for strength prediction. The transition in failure mechanism, from local opening damage to completely splitting destruction, was mainly responsible for such strain rate effects. And three major failure modes were summarized under microscopic observations: fiber fracture, inter-fiber fracture, and interface delamination. Finally, by introducing a nonlinear damage variable, a simplified ZWT model was developed to characterize the dynamic mechanical response. Excellent agreement was shown between the experimental and simulated results.

3-Turns教学法在实践共同体促进深度学习中的应用

在电气工程专业实践教学过程中凝练出由Turn up、Turn away、Turn back等环节组成的3-Turns教学法。经过多轮的实践应用,3-Turns教学法在实践共同体中提供了一个兼具解释性与可操作性的教学样例。研究发现,3-Turns教学法对实践共同体促进工科生深度学习起到了提质增效的作用;3-Turns教学法为工程实践学习情境的强化设计提供了理论依据与经验支持。该研究验证了基于3-Turns教学法的实践共同体促进工科生深度学习的有效性,为助力工科人才培养质量的持续提升做出了积极的探索与实践。

Integral Event-Triggered Attack-Resilient Control of Aircraft-on-Ground Synergistic Turning System With Uncertain Tire Cornering Stiffness

This article proposes an integral-based event-triggered attack-resilient control method for the aircraft-on-ground(AoG) synergistic turning system with uncertain tire cornering stiffness under stochastic deception attacks. First, a novel AoG synergistic turning model is established with synergistic reverse steering of the front and main wheels to decrease the steering angle of the AoG fuselage, thus reducing the steady-state error when it follows a path with some large curvature. Considering that the tire cornering stiffness of the front and main wheels vary during steering, a dynamical observer is designed to adaptively identify them and estimate the system state at the same time.Then, an integral-based event-triggered mechanism(I-ETM) is synthesized to reduce the transmission frequency at the observerto-controller end, where stochastic deception attacks may occur at any time with a stochastic probability. Moreover, an attackresilient controller is designed to guarantee that the closed-loop system is robust L2-stable under stochastic attacks and external disturbances. A co-design method is provided to get feasible solutions for the observer, controller, and I-ETM simultaneously. An optimization program is further presented to make a tradeoff between the robustness of the control scheme and the saving of communication resources. Finally, the low-and high-probability stochastic deception attacks are considered in the simulations. The results have illustrated that the AoG synergistic turning system with the proposed control method follows a path with some large curvature well under stochastic deception attacks. Furthermore,compared with the static event-triggered mechanisms, the proposed I-ETM has demonstrated its superiority in saving communication resources.

The summer solstice is the turning point when light and temperature affect the growth of trees

The interaction between light and temperature is known to influence the seasonal growth of trees.Traditional studies on"light"primarily focus on day length,specifically short day(SD)or long day(LD)conditions.However,little research has been conducted on the process of transitioning between SD and LD conditions.

Technique for Multi-Pass Turning Optimization Based on Gaussian Quantum-Behaved Bat Algorithm

The multi-pass turning operation is one of the most commonly used machining methods in manufacturing field.The main objective of this operation is to minimize the unit production cost.This paper proposes a Gaussian quantum-behaved bat algorithm(GQBA)to solve the problem of multi-pass turning operation.The proposed algorithm mainly includes the following two improvements.The first improvement is to incorporate the current optimal positions of quantum bats and the global best position into the stochastic attractor to facilitate population diversification.The second improvement is to use a Gaussian distribution instead of the uniform distribution to update the positions of the quantum-behaved bats,thus performing a more accurate search and avoiding premature convergence.The performance of the presented GQBA is demonstrated through numerical benchmark functions and amulti-pass turning operation problem.Thirteen classical benchmark functions are utilized in the comparison experiments,and the experimental results for accuracy and convergence speed demonstrate that,in most cases,the GQBA can provide a better search capability than other algorithms.Furthermore,GQBA is applied to an optimization problem formulti-pass turning,which is designed tominimize the production cost while considering many practical machining constraints in the machining process.The experimental results indicate that the GQBA outperforms other comparison algorithms in terms of cost reduction,which proves the effectiveness of the GQBA.

Status of research on non-conventional technology assisted single-point diamond turning

With the increasing use of difficult-to-machine materials in aerospace applications,machining requirements are becoming ever more rigorous.However,traditional single-point diamond turning(SPDT)can cause surface damage and tool wear.Thus,it is difficult for SPDT to meet the processing requirements,and it has significant limitations.Research indicates that supplementing SPDT with unconventional techniques can,importantly,solve problems due to the high cutting forces and poor surface quality for difficult-to-machine materials.This paper first introduces SPDT and reviews research into unconventional techniques for use with SPDT.The machining mechanism is discussed,and the main advantages and disadvantages of various methods are investigated.Second,hybrid SPDT is briefly described,which encompasses ultrasonic-vibration magnetic-field SPDT,ultrasonic-vibration laser SPDT,and ultrasonic-vibration cold-plasma SPDT.Compared with the traditional SPDT method,hybrid SPDT produces a better optical surface quality.The current status of research into unconventional techniques to supplement SPDT is then summarized.Finally,future development trends and the application prospects of unconventional assisted SPDT are discussed.

Development and Evaluation of Intersection-Based Turning Movement Counts Framework Using Two Channel LiDAR Sensors

This paper presents vehicle localization and tracking methodology to utilize two-channel LiDAR data for turning movement counts. The proposed methodology uniquely integrates a K-means clustering technique, an inverse sensor model, and a Kalman filter to obtain the final trajectories of an individual vehicle. The objective of applying K-means clustering is to robustly differentiate LiDAR data generated by pedestrians and multiple vehicles to identify their presence in the LiDAR’s field of view (FOV). To localize the detected vehicle, an inverse sensor model was used to calculate the accurate location of the vehicles in the LiDAR’s FOV with a known LiDAR position. A constant velocity model based Kalman filter is defined to utilize the localized vehicle information to construct its trajectory by combining LiDAR data from the consecutive scanning cycles. To test the accuracy of the proposed methodology, the turning movement data was collected from busy intersections located in Newark, NJ. The results show that the proposed method can effectively develop the trajectories of the turning vehicles at the intersections and has an average accuracy of 83.8%. Obtained R-squared value for localizing the vehicles ranges from 0.87 to 0.89. To measure the accuracy of the proposed method, it is compared with previously developed methods that focused on the application of multiple-channel LiDARs. The comparison shows that the proposed methodology utilizes two-channel LiDAR data effectively which has a low resolution of data cluster and can achieve acceptable accuracy compared to multiple-channel LiDARs and therefore can be used as a cost-effective measure for large-scale data collection of smart cities.

Design of a coated thinly clad chalcogenide long-period fiber grating refractive index sensor based on dual-peak resonance near the phase matching turning point

A novel method for designing chalcogenide long-period fiber grating(LPFG) sensors based on the dual-peak resonance effect of the LPFG near the phase matching turning point(PMTP) is presented. Refractive index sensing in a high-refractive-index chalcogenide fiber is achieved with a coated thinly clad film. The dual-peak resonant characteristics near the PMTP and the refractive index sensing properties of the LPFG are analyzed first by the phase-matching condition of the LPFG. The effects of film parameters and cladding radius on the sensitivity of refractive index sensing are further discussed. The sensor is optimized by selecting the appropriate film parameters and cladding radius. Simulation results show that the ambient refractive index sensitivity of a dual-peak coated thinly clad chalcogenide LPFG at the PMTP can be 2400 nm/RIU, which is significantly higher than that of non-optimized gratings. It has great application potential in the field of chemical sensing and biosensors.

DE-DOLLARIZATION IS TRENDING AND THERE'S NO TURNING BACK

The U.S.dollar has long stood tall as the pre-eminent global currency for international cross-border trade settlements and foreign exchange reserves ever since the launch of the Bretton Woods institutions-International Monetary Fund(IMF)and World Bank(WB).

Analysis and Prediction of Effect of Turning Marks Diffraction on Image Quality of Optical System

Single-point diamond turning (SPDT) is widely used in the machining of infrared materials and metal-based mirrors. Diamond tips can scratch material, replicate the shape of the tip, and create annular turning marks on optical surfaces, which can have unpredictable adverse effects on imaging. In order to predict the effect of turning marks diffraction on the degradation of imaging quality, a model of the influence of SPDT processing parameters on the reduction of system imaging MTF under the influence of ideal grating turning marks diffraction was established. The results show that the depth of the turning mark will lead to the decline of MTF, especially the low frequency information. Finally, a method is proposed to reduce the effect of turning marks diffraction through changing the processing parameters. .

Analyzing the Effects of Tool Holder Stiffness on Chatter Vibration Reduction in Turning

This paper investigates the effects of tool holder materials on chatter vibration in turning operations.The study uses a complex dynamic turning model with two degrees of freedom for the orthogonal cutting system.Tool holders made from different materials,including Al 5083,Al 6082,Al 7012,and a standard 4140 material,were subjected to chatter vibration to investigate their process damping capabilities.The study found that the standard tool holder 4140 allows for higher stable depths of cut and produces similar process damping values compared to the other tool holders.Finite element analyses(FEA)were performed to verify the experimental results,and the modal and FEA analyses produced very similar results.The study concludes that future research should investigate the effects of tool holders made from high alloy steel alloys on process damping.Overall,this paper provides important insights into the effects of tool hold-er materials on chatter vibration and process damping in turning operations,which can help in the design of more effi-cient and effective cutting systems.

High-sensitive state perception method for inverter-fed machine turn insulation based on FrFT-Mel

Amidst the swift advancement of new power systems and electric vehicles,inverter-fed machines have progressively materialized as a pivotal apparatus for efficient energy conversion.Stator winding turn insulation failure is the root cause of inverter-fed machine breakdown.The online monitoring of turn insulation health can detect potential safety risks promptly,but faces the challenge of weak characteristics of turn insulation degradation.This study proposes an innovative method to evaluate the turn insulation state of inverter-fed machines by utilizing the fractional Fourier transform with a Mel filter(FrFT-Mel).First,the sensitivity of the high-frequency(HF)switching oscillation current to variations in turn insulation was analyzed within the fractional domain.Subsequently,an improved Mel filter is introduced,and its structure and parameters are specifically designed based on the features intrinsic to the common-mode impedance resonance point of the electrical machine.Finally,an evaluation index was proposed for the turn insulation state of inverter-fed machines.Experimental results on a 3kW permanent magnet synchronous machine(PMSM)demonstrate that the proposed FrFT-Mel method significantly enhances the sensitivity of turn insulation state perception by approximately five times,compared to the traditional Fourier transform method.

DER SPATIAL TURN IN DEN KLASSISCHEN ALTERTUMSWISSENSCHAFTEN(UND SPEZIELL IN DER EPIGRAPHIK)

Since the 1990s the so-called spatial turn has brought back space and topography into the discussion within historical studies,particular ancient studies.This survey reviews current trends and developments within the field and offers some perspectives on possible future developments related to space,material,objects,their agency,and frames.

HCB-turn热风干燥器在纸机改造中的应用

由于市场、成本、车速、纸张品质等原因,需要对背面涂布段进行优化改造,这时候加装HCB-turn热风干燥器则是最佳的选择之一,因为它比常规纸幅运行节省1/3的安装空间,且适用于所有纸种,对纸张和涂层能够有高效的干燥和无污染的转向。

Numerical Study of a Three-Dimensional Laminar Flow in a Rectangular Channel with a 180-Degree Sharp Turn

This study presents a numerical analysis of three-dimensional steady laminar flow in a rectangular channel with a 180-degree sharp turn. The Navier-Stokes equations are solved by using finite difference method for Re = 900. Three-dimensional streamlines and limiting streamlines on wall surface are used to analyze the three-dimensional flow characteristics. Topological theory is applied to limiting streamlines on inner walls of the channel and two-dimensional streamlines at several cross sections. It is also shown that the flow impinges on the end wall of turn and the secondary flow is induced by the curvature in the sharp turn.

Physiological Characterization of Green Turning of Rice Seedlings at Different Temperatures

Using early indica rice Zhongzao 39 and japonica rice Xiushui 134 as the experimental materials, the effects of 4 temperature levels after transplantation on turning green, leaf growth, tillering, dry matter accumulation and nutrition absorption were studied using a greenhouse and an artificial climate chest. We found that （1） tillering did not occur and growth of one new leaf took over 15 days at 16℃. New leaf growth took over 10 days and tillering occurred after 15 days of transplanta- tion at 19 ℃. Tillering appeared 10 days after planting and new leaf growth took 5 days between 22 and 25 ℃. This showed that low temperature impeded the turn- ing green of rice seedlings and the temperature must reach above 19 ℃ to ensure timely appearance of new leaf, tillering and turning green in rice seedlings. （2） When the temperature was 10 increased, both 100-seedling dry weight and nitrogen absorption increased. At temperatures lower 11 than 19 ℃, both dry weight incre- ment and nitrogen absorption were low. Nitrogen absorption of all organs increased obviously between 19 and 22 ℃. Thus, 19 ℃ was found to be an minimum tem- perature for plant organs to absorb nutrients. （3）Tiller of seedling cultivated on dry- land soil and substrate grew quickly and tillering occurred about 7 days after trans- planting. After that, the growth rate was about 0.18 tiller per day. For seedlings cultivated in slurry, tillering occurred 10 days after transplanting and the tillers grew at a rate of 0.16 tiller per day. However, substrate choice during the seedling rais- ing stage had no significant influence on leaf age. （4） Japonica rice exhibited stronger resistance to low temperature than indica rice. Tillering began at about the same time after transplanting in both rice varieties, but japonica rice exhibited higher tillering speed than early indica rice. The speed of leaf growth was higher in japoni- ca rice before transplantation but higher in indica rice after transplantation.

A Class of the Singularly Perturbed Boundary Value Problems for Elliptic Equation with a Super Surface of Turning Point in n-dimensional Space

In this paper, we study a class singular perturbed elliptic equation boundary value problem with a super surface of turning point in n-dimensional space by using the method of multiple scales and the comparison theorem. The uniformly valid asymptotic approxmations of solutions for the boundary value problem is constructed.

拟共形映射与Turning域

讨论了拟共形映射与Turning域及ILC域之间的关系.首先根据拟共形映射与Turning域的性质得到f是拟共形映射的充要条件是f将Rn中的Turning域映成Rn中的Turning域;然后根据Turning域及ILC域的等价性得到f是拟共形映射的充要条件是f将Rn中的ILC域映成Rn中的ILC域.

SURFACE ROUGHNESS PREDICTION MODEL FOR ULTRAPRECISION TURNING ALUMINIUM ALLOY WITH A SINGLE CRYSTAL DIAMOND TOOL

A surface roughness model utilizing regression analysis method is developedfor predicting roughness of ultra-precision machined surface with a single crystal diamond tool. Theeffects of the main variables, such as cutting speed, feed, and depth of cut on surface roughnessare also analyzed in diamond turning aluminum alloy. In order to predict the optimum cuttingconditions during process planning. A lot of experimental results show that the model can predictthe surface roughness effectively under a certain cutting conditions.