A Novel Twist Deformation Model of Soft Tissue in Surgery Simulation

Real-time performance and accuracy are two most challenging requirements in virtual surgery training.These difficulties limit the promotion of advanced models in virtual surgery,including many geometric and physical models.This paper proposes a physical model of virtual soft tissue,which is a twist model based on the Kriging interpolation and membrane analogy.The proposed model can quickly locate spatial position through Kriging interpolation method and accurately compute the force change on the soft tissue through membrane analogy method.The virtual surgery simulation system is built with a PHANTOM OMNI haptic interaction device to simulate the torsion of virtual stomach and arm,and further verifies the real-time performance and simulation accuracy of the proposed model.The experimental results show that the proposed soft tissue model has high speed and accuracy,realistic deformation,and reliable haptic feedback.

Shear deformable finite beam elements for composite box beams

The shear deformable thin-walled composite beams with closed cross-sections have been developed for coupled flexural, torsional, and buckling analyses. A theoretical model applicable to the thin-walled laminated composite box beams is presented by taking into account all the structural couplings coming from the material anisotropy and the shear deformation effects. The current composite beam includes the transverse shear and the restrained warping induced shear deformation by using the first-order shear deformation beam theory. Seven governing equations are derived for the coupled axial-flexural-torsional-shearing buckling based on the principle of minimum total potential energy. Based on the present analytical model, three different types of finite composite beam elements, namely, linear, quadratic and cubic elements are developed to analyze the flexural, torsional, and buckling problems. In order to demonstrate the accuracy and superiority of the beam theory and the finite beam elements developed by this study,numerical solutions are presented and compared with the results obtained by other researchers and the detailed threedimensional analysis results using the shell elements of ABAQUS. Especially, the influences of the modulus ratio and the simplified assumptions in stress-strain relations on the deflection, twisting angle, and critical buckling loads of composite box beams are investigated.

Kinematics,Deformation,and Aerodynamics of a Flexible Flapping Rotary Wing in Hovering Flight

The Flapping Rotary Wing(FRW)is a micro air vehicle wing layout coupling flapping,pitching,and rotating motions.It can gain bencfits in high lift from a fast passive rotating motion,which is tightly related to the passive pitching motion directly caused by wing flexible deformation.Therefore,flexible deformation is crucial for the wing kinematics and aerodynamic performance of an FRW.In this paper,we explored the effct of flexibility on wing kinematics and acrodynamics on the basis of a mechanical FRW model.A photogrammetric method was adopted to capture motion images according to which wing orientations and deformations were reconstructed.Corresponding acrodynamic force was computed using computational fluid dynamic method,and wing kinematics and deformations were used as simulation inputs.The experimental measurements presented the real orientation and deformation pattem of a real FRW.The wing passive deformation of a high-intensity FRW was found to be mainly caused by inertial force,and a linear positive spanwise twist was observed in the FRW.The effects of wing deformation on aerodynamic force production and the underlying mechanism were addressed.Results showed that lift augment,rotating moment enhancement,and power efficiency improvement can be achieved when a wing becomes flexible.Wing spanwise twist mainly accounts for these changes in aerodynamics,and increment in spanwise twist could further contributes to aerodynamic improvement.