基于Super-Twisting滑模S面的无人机路径跟踪控制

针对小型固定翼无人机在执行任务时跟踪精度低以及容易受外界风影响的问题,设计基于Super-Twisting滑模S面(STSM S-Plane)的路径跟踪控制器,同时采用内外双环控制模式。外环即速度环采用Super-Twisting滑模控制,内环即姿态环采用S面控制。考虑到S面控制求导易导致积分爆炸的问题引入了二阶微分器,并对外界风组成进行建模研究。最后通过空间特殊曲线来验证所设计算法的控制性能。仿真结果表明,所设计的算法可以实现固定翼无人机对期望路径的精确跟踪,并具有良好的鲁棒性和抗干扰性能。

基于改进Super-Twisting算法和电流预测的PMSM调速控制

针对永磁同步电机传统PI控制器存在响应速度慢、控制精度低、鲁棒性差等问题,该文提出一种改进调速控制方案。首先,将全局快速积分型终端滑模理论与广义Super-Twisting算法相结合,基于Anti-Windup原理设计改进广义Super-Twisting积分终端滑模速度控制器,并采用新型分段指数函数优化控制律;其次,设计改进扩展扰动观测器对系统未知扰动进行前馈补偿;最后,在电流环引入无差拍电流预测控制器,进一步改善系统的动态响应。仿真结果表明,所提出的改进控制方案能够有效提高调速系统的动态控制性能、控制精度和鲁棒性。

Dynamic characteristics of multi-span spinning beams with elastic constraints under an axial compressive force

A theoretical model for the multi-span spinning beams with elastic constraints under an axial compressive force is proposed.The displacement and bending angle functions are represented through an improved Fourier series,which ensures the continuity of the derivative at the boundary and enhances the convergence.The exact characteristic equations of the multi-span spinning beams with elastic constraints under an axial compressive force are derived by the Lagrange equation.The efficiency and accuracy of the present method are validated in comparison with the finite element method(FEM)and other methods.The effects of the boundary spring stiffness,the number of spans,the spinning velocity,and the axial compressive force on the dynamic characteristics of the multi-span spinning beams are studied.The results show that the present method can freely simulate any boundary constraints without modifying the solution process.The elastic range of linear springs is larger than that of torsion springs,and it is not affected by the number of spans.With an increase in the axial compressive force,the attenuation rate of the natural frequency of a spinning beam with a large number of spans becomes larger,while the attenuation rate with an elastic boundary is lower than that under a classic simply supported boundary.

Comparison between seismic analysis of twisting and regular 52-story towers considering soil-structure interaction

A dynamic analysis of both twisting and regular towers is carried out to determine the results of considering soil-structure interaction(SSI)on high-rise buildings.In addition,the difference between the seismic performance of using twisting towers over regular ones is investigated.The twisting tower is a simulation of the Evolution Tower(Moscow).The towers’skeletons consist of RC elements and rest on a reinforced concrete piled-raft foundation.The soil model is considered as multi-layered with the same soil properties as the zone chosen for the analysis(New Mansoura City,Egypt).The only difference between both towers is their shape in elevation.The whole system is modelled and analyzed in a single step as one full 3D model,which is known as the direct approach in SSI.All analyses are carried out using finite-element software(Midas GTS NX).Dynamic output responses due to three records of seismic loads are proposed and presented in some graphs.Based on the results,it is concluded that SSI has a considerable effect on the dynamic response of tall buildings mainly because of the foundation flexibility,as it leads to lengthening the vibration period,increasing the story drift and the base shear for both cases.

Carrageenan Fiber Prepared by a New Process Route of Ba^(2+)Ion Pre-Crosslinking in the Spinning Solution

Ba^(2+)pre-crosslinked carrageenan fiber(Ba/CAF)was prepared by adding a small amount of Ba^(2+) to the carrageenan(CA)solution as the spinning solution.Ba/CAF-n/A,Ba/CAF-n/B and Ba/CAF-n/C were prepared with ethanol solution(combine A),high concentration BaCl_(2)solution(combine B)and low concentration BaCl_(2)solution(combine C),as coagulation bath and stretch bath,respectively.The combination of coagulation bath and stretch bath suitable for Ba^(2+) pre-crosslinking wet spinning was screened.The results showed that Ba^(2+) can induce the birefringence of the CA molecular chain,and the Ba^(2+) pre-crosslinking effect is the best when the CA mass fraction is 8.0 wt%.From the perspective of production safety,fiber performance and spinning cost,the coagulation bath of 3.5 wt%BaCl_(2)solution and stretch bath of 1.7 wt%BaCl_(2)solution,that is,combination C with low concentration BaCl_(2)solution,is the best choice.Ba/CAF-8.0/C was obtained under the best conditions.The linear intensity,water absorption and flame retardancy study showed that the breaking strength of Ba/CAF-8.0/C is as high as 1.61 cN/dtex,the water absorption was 649.2%and 574.3%,in deionized water and normal saline,respectively,and the LOI value reached 32.

Preparation of Regenerated Silk Fibroin Hybrid Fibers with Hydrogen Peroxide Sensing Properties by Wet Spinning

Silk is widely used in the production of high-quality textiles.At the same time,the amount of silk textiles no longer in use and discarded is increasing,resulting in significant waste and pollution.This issue is of great concern in many countries where silk is used.Hydrogen peroxide as a naturally occurring compound is an important indicator of detection in both biology and the environment.This study aims to develop a composite fiber with hydrogen peroxide-sensing properties using discarded silk materials.To achieve this goal,firstly,polydopamine(PDA)was used to encapsulate the ZnFe_(2)O_(4) NPs to achieve the improvement of dispersion,and then regenerated silk fibroin(RSF)and PDA@ZnFe_(2)O_(4)/RSF hybrid fibers are prepared by wet spinning.Research has shown that PDA@ZnFe_(2)O_(4)/RSF demonstrates exceptional sensitivity,selectivity,and stability in detecting hydrogen peroxide,while maintaining high mechanical strength.Furthermore,the complete hybridization of PDA@ZnFe_(2)O_(4) with silk fibroin not only results in the combination of the durability of silk fibroin and PDA@ZnFe_(2)O_(4)’s rigidity,ensuring a reliable service life,but also makes PDA@ZnFe_(2)O_(4)/RSF exhibit excellent catalytic activity and biocompatibility.Therefore,the composite fiber exhibits exceptional mechanical properties and reliable hydrogen peroxide sensing capabilities,making it a promising material for biological and medical applications.

基于自适应Super-twisting算法的永磁同步电机驱动控制

在永磁同步电机调速系统中,良好的速度控制器要同时兼顾跟踪性能及抗干扰性能,非线性控制具有快速响应及强鲁棒性的优点,适用于速度控制器的设计,但传统滑模控制存在着严重的抖振问题。自适应Super-twisting算法属于二阶滑模,能将相轨迹的状态量以级数的形式收敛到原点,又能在线调整控制器的增益,因此能有效削弱抖振现象。采用自适应Super-twisting算法来设计速度控制器,并通过李雅普诺夫函数给出其稳定性证明。试验结果表明,所设计的控制器具有良好的跟踪性能及抗干扰性能,同时能减小电流的纹波,达到削弱抖振的目的。

ANALYSIS OF MECHANICS IN BALL SPINNING OF THIN-WALLED TUBE

Ball spinning is applied to manufacturing thin-walled tube with high precision and high mechanical properties. On the basis of plastic mechanics, by simplifying ball spinning of thin-walled tube as plane strain problem, slab method is used for the purpose of calculating the contact deformation pressure. The spinning force components, the torsional moment, the deformation power and the deformation work are calculated further as well. The influence of the two important process parameters such as the feed ratio and the ball diameter on the spinning force components is analyzed in order to further control the spinning force components by regulating the two process variables during the ball spinning process. The stress and strain state in deformable zone as well as mechanics boundary conditions in ball spinning are obtained. The effect of the three spinning force components on the formability of the spun part is analyzed and validated through the ball spinning experiments. The theoretical and experimental results show that the radial spinning component plays a significant role in ball spinning of thin-walled tube, and the mechanics situation in backward ball spinning contributes to enhancing the plasticity of the metal material, but that in forward ball spinning contributes to advancing the axial flow of the metal material.

基于改进型Super-twisting的双馈感应发电机直接功率控制

为提高双馈感应发电机(DFIG)直接功率控制的鲁棒性和抗干扰能力,提出一种改进型超螺旋滑模(STSMC)的直接功率控制(DPC)。首先,建立参数摄动下的DFIG最大功率捕获模型和定子磁场定向的双馈感应发电机模型;然后,将非奇异快速终端滑模面(NFTSM)与一种改进型超螺旋(Super-twisting)优化算法结合,设计DFIG直接功率控制器(IST-NFTSMC)。其中所设计的非奇异滑模面能有效避免传统滑模控制(SMC)的奇异现象,且改进超螺旋控制律能有效削弱NFTSMC抖振,提高功率控制精度;最后,通过仿真和实验,与PI控制和传统SMC控制相比,该控制能削弱DFIG功率与电流抖振问题,加快其收敛速度,提高DFIG直接功率控制稳态精度。

大长径比远程制导火箭弹自适应Super-twisting控制方法

针对具有轻质薄壳结构的大长径比远程制导火箭弹刚体-弹性体耦合动力学控制难题,提出了一种自适应Super-twisting控制方法。首先,将大长径比远程制导火箭弹的弹性模态与外部干扰项视为归一化扰动,建立了考虑参数、模型不确定性的刚体-弹性体耦合动力学模型。针对外部扰动难以实时精准获取的问题,设计了有限时间收敛干扰观测器,能够在大范围气动参数摄动情形下对远程制导火箭弹外部扰动进行实时精准估计。为提高系统鲁棒性,设计了基于Super-twisting算法的自适应有限时间控制方法,使系统能根据状态误差自动调节控制参数,在削弱高频抖振的同时有效提高抗干扰能力。仿真结果表明:所提控制方法在弹体±15%气动参数摄动的条件下,由平飞状态转变为跟踪幅值为10的正弦弹道倾角指令时,实现3.2 s内弹道倾角跟踪误差收敛至0.002°,可实现远程制导火箭弹姿态平稳跟踪控制弹道倾角指令。

Observer-based robust high-order fully actuated attitude autopilot design for spinning glide-guided projectiles

This paper investigates the design of an attitude autopilot for a dual-channel controlled spinning glideguided projectile(SGGP),addressing model uncertainties and external disturbances.Based on fixed-time stable theory,a disturbance observer with integral sliding mode and adaptive techniques is proposed to mitigate total disturbance effects,irrespective of initial conditions.By introducing an error integral signal,the dynamics of the SGGP are transformed into two separate second-order fully actuated systems.Subsequently,employing the high-order fully actuated approach and a parametric approach,the nonlinear dynamics of the SGGP are recast into a constant linear closed-loop system,ensuring that the projectile's attitude asymptotically tracks the given goal with the desired eigenstructure.Under the proposed composite control framework,the ultimately uniformly bounded stability of the closed-loop system is rigorously demonstrated via the Lyapunov method.Validation of the effectiveness of the proposed attitude autopilot design is provided through extensive numerical simulations.

双层自适应快速super twisting控制算法

为提高super twising算法的收敛速度,解决现有算法存在的增益过估计问题,提出了两种自适应增益快速super twisting算法.分别通过快速终端滑模趋近律和增加线性项加快收敛速度.利用基于等效控制的双层自适应律调节增益,保证滑模存在条件的成立,同时使增益尽量的小.采用Lyapunov方法证明了新算法具有更优良的收敛特性,根据有界实引理和Schur补定理分别给出了两种算法的参数整定策略.仿真算例表明,在相同控制参数下,新算法的能耗与原算法接近,并具有更快的收敛速度和更强的鲁棒性.

Effect of Nd content on electrochemical performances of nanocrystalline and amorphous (Mg_(24)Ni_(10)Cu_2)_(100-x)Nd_x(x=0-20) alloys prepared by melt spinning

The nanocrystalline and amorphous Mg2Ni-type alloys with a chemical composition of （Mg24Ni10Cu2）100-xNdx （x=0, 5, 10, 15, 20） were fabricated by melt spinning technology. The effects of spinning rate on the structure and electrochemical hydrogen storage performance of the alloys were investigated. The as-spun Nd-free alloy displays an entire nanocrystalline structure, whereas the as-spun Nd-added alloys hold a nanocrystalline and amorphous structure, suggesting that the addition of Nd facilitates the glass forming of the Mg2Ni-type alloys. Increasing the spinning rate from 0 to 40 m/s gives rise to the discharge capacity growing from 42.5 to 100.6 mA·h/g for the x=0 alloy and from 86.4 to 452.8 mA·h/g for the x=10 alloy. And the cycle stability （S20） rises from 40.2%to 41.1%for the x=0 alloy and from 53.2%to 89.7%for the x=10 alloy, respectively.

Review on hot spinning for difficult-to-deform lightweight metals

Hot spinning process has attracted significant attention because it can be used to manufacture complex parts, extend the forming limit of materials, decrease forming forces and reduce process chains. In this paper, we review researches on lightweight metals spun at elevated temperatures since they are difficult to deform at room temperature. These metals include light alloys, such as titanium, magnesium and aluminum alloys, and metal composites. Then, the heating methods used in the hot spinning process and the treatment methods employed for the temperature boundary condition in finite element analyses for the process were discussed. Finally, the future development directions for the hot spinning process of lightweight but difficult-to-deform alloys were highlighted.

Photocatalytic ozonation-based degradation of phenol by ZnO—TiO_(2)nanocomposites in spinning disk reactor

Spinning disk reactor(SDR)has emerged as a novel process intensification photocatalytic reactor,and it has higher mass transfer efficiency and photon utilization for the degradation of toxic organic pollutants by advanced oxidation processes(AOPs).In this study,ZnO—TiO_(2)nanocomposites were prepared by solgel method,and coated on the disk of SDR by impregnation-pull-drying-calcination method.The performance of catalyst was characterized by X-ray diffraction,scanning electron microscope,X-ray photoelectron spectroscopy,photoluminescence and ultraviolet—visible diffuse reflectance spectroscopy.Photocatalytic ozonation in SDR was used to remove phenol,and various factors on degradation effect were studied in detail.The results showed that the rate of degradation and mineralization reached 100%and 83.4%under UV light irradiation after 50 min,compared with photocatalysis and ozonation,the removal rate increased by 69.3%and 34.7%,and mineralization rate increased by 56.7%and 62.9%,which indicated that the coupling of photocatalysis and ozonation had a synergistic effect.The radical capture experiments demonstrated that the active species such as photogenerated holes(h^(+)),hydroxyl radicals(·OH),superoxide radical(·O_(2)-)were responsible for phenol degradation,and·OH played a leading role in the degradation process,while h+and·O_(2)^(-)played a non-leading role.

改进Twisting算法的相对位姿耦合控制

为实现对非合作目标航天器进行在轨服务,将Twisting算法与线性补偿项相结合,设计相对位置与姿态耦合的二阶滑模控制器.以航天器对接端口间耦合相对运动模型为基础,设计两种滑模平面的改进Twisting控制器.选取严格李雅普诺夫函数,证明所设计的改进Twisting控制器对有界干扰具有有限时间收敛的特性,并估计出收敛时间的上界.设计数学仿真,将其与标准Twisting算法进行对比,验证所设计的二阶滑模控制器对模型不确定性及有界干扰具有较强的鲁棒性,并能够有效抑制执行机构的震颤.

Variable-based Ramberg-Osgood constitutive model of power spinning bushing

The influences of power spinning process parameters on the mechanical properties of spinning parts were analyzed with an SXD100/3-CNC numerical control power spinning machine.The unidirectional tensile tests were carried out.Based on the experimental data,a ternary quadratic regression equation was established by orthogonal experiment.The Ramberg-Osgood constitutive model of tin-bronze connecting rod bushing was obtained.Referred to the constitutive relation of macroscopic incremental,the incremental elastoplastic constitutive relation of spinning parts was deduced based on the Mises yield criterion and kinematic hardening model.The results can be applied to the elastoplastic analysis in finite element numerical simulation.

Finite element simulation of ball spinning of NiTi shape memory alloy tube based on variable temperature field

As a new attempt,ball spinning was used to manufacture the nickel-titanium shape memory alloy（NiTi SMA） tube at elevated temperature.The NiTi bar with a nominal composition of Ni50.9Ti49.1（mole fraction,%） was solution treated and was used as the original tube blank for ball spinning.Based on the variable temperature field and the constitutive equation,rigid-viscoplastic finite element method（FEM） was applied in order to simulate the ball spinning of NiTi SMA tube.The temperature field,the stress field,the strain field and the load prediction were obtained by means of FEM.FEM results reveal that there is a temperature increase of about 160 ℃ in the principal deformation zone of the spun part.It can be found from the stress fields and the strain fields that the outer wall of NiTi SMA tube is easier to meet the plastic yield criterion than the inner wall,and the plastic deformation zone is caused to be in a three-dimensional compressive stress state.The radial strain and the tangential strain are characterized by the compressive strain,while the axial strain belongs to the tensile strain.The variation of spinning loads with the progression of the ball is of great importance in predicting the stable flow of the spun part.

Reduce waste and boost profits in spinning:Uster presents FiberQ and RSO 3D

Coinciding with World Water Day celebrations and unSpinners seeking profitable investments for sustainable mill operations would do well to check out Uster FiberQ and RSO 3D.Both these systems offer attractive ROI.They also help spinners control the most expensive stages in the mill process,cutting waste and boosting profits.

Application of BPANN in spinning deformation of thin-walled tubular parts with longitudinal inner ribs

Back-propagation artificial neural network (BPANN) is used in ball backward spinning in order to form thin-walled tubular parts with longitudinal inner ribs. By selecting the process parameters which have a great influence on the height of inner ribs as well as fish scale on the surface of the spun part, a BPANN of 3-8-1 structure is established for predicting the height of inner rib and recognizing the fish scale defect. Experiments data have proved that the average relative error between the measured value and the predicted value of the height of inner rib is not more than 5%. It is evident that BPANN can not only predict the height of inner ribs of the spun part accurately, but recognize and prevent the occurrence of the quality defect of fish scale successfully, and combining BPANN with the ball backward spinning is essential to obtain the desired spun part.