Numerical study on three-dimensional flow field of continuously rotating detonation in a toroidal chamber

Gaseous detonation propagating in a toroidal chamber was numerically studied for hydrogen/oxygen/nitrogen mixtures. The numerical method used is based on the three-dimensional Euler equations with detailed finiterate chemistry. The results show that the calculated streak picture is in qualitative agreement with the picture recorded by a high speed streak camera from published literature. The three-dimensional flow field induced by a continuously rotating detonation was visualized and distinctive features of the rotating detonations were clearly depicted. Owing to the unconfined character of detonation wavelet, a deficit of detonation parameters was observed. Due to the effects of wall geometries, the strength of the outside detonation front is stronger than that of the inside portion. The detonation thus propagates with a constant circular velocity. Numerical simulation also shows three-dimensional rotating detonation structures, which display specific feature of the detonation- shock combined wave. Discrete burning gas pockets are formed due to instability of the discontinuity. It is believed that the present study could give an insight into the interest- ing properties of the continuously rotating detonation, and is thus beneficial to the design of continuous detonation propulsion systems.

Maximum two-dimensional (u×v,4,1,3)-OOCs

Let Ф（u ×v, k, Aa, Ac） be the largest possible number of codewords among all two- dimensional （u ×v, k, λa, λc） optical orthogonal codes. A 2-D （u× v, k, λa, λ）-OOC with Ф（u× v, k, λa, λc） codewords is said to be maximum. In this paper, the number of codewords of a maximum 2-D （u × v, 4, 1, 3）-OOC has been determined.

Infinite Three-Dimensional Coordination Polymers: Synthesis and Structures of [Cd (4,4'-bpy)_2 (H_2O)_2]_n (pic)_(2n),[Zn (4,4'-bpy)_2 (H_2O)_2]_n(pic)_(2n) (H_2O)_(2n), and [Zn (4,4'-bpy)_2 (H_2O)_2]_n (4,4'-bpy)_n(H_2O)_n (pic)_(2n)

Three Complexes of the formula [Cd (4,4'-bpy)_2 (H_2O)_2]_n. (pic)_(2n) (1) [Zn (4,4'-bpy)_2 (H_2O)]_n (4,4'-bpy)_n(H_2O)_n (pic)-(2n) (2) and [Zn (4,4'-bpy)_2 (H_2O)]_n (4,4'-bpy)_n (pic)-(2n)(H_2O)_n (3) (4.4'-bpy = 4.4'-bipyridine. pic = picric anion ) have been synthesized and characterized by elemental analysis and single-crystal x-ray diffraction. They all have infinite three-dimensional network structure. crystallizing in the monoclinic space group C2/c (1) and Cc (2.3).

A three-dimensional model for the transportation of Fe and Mn in Arha Reservoir

Coupling with a three dimensional (3D) hydrodynamic model and a suspended solids model, a 3D model for the transport of Fe and Mn in Arha Reservoir, China, was developed. The 3D velocity fields for the flood season are computed to drive the 3D model of Fe and Mn in which the processes of advection, diffusion, redox, sorption, desorption, deposition, and re suspension are included. The model has been calibrated by matching observed fluid, suspended solids, and total concentrations of Fe and Mn in the water column and in the sediment, successively. The model simulated both horizontal and vertical gradients of Fe and Mn in Arha Reservoir. It was found that Fe and especially Mn stratify in accordance with the stratification of DO during summer. The redox cycles across the water sediment interface has a principal role in the rise of Fe and Mn concentrations in the overlying water. It was also found that Fe and Mn loadings from the tributaries have a carryover effect on the water quality through a secondary contamination in the reservoir.

Three dimensional particles identification and shape parameters research on coarse aggregates of asphalt mixture using X-ray CT images

In this paper a series of digital image processing methods were adopted for getting separated coarse aggregates from asphalt mixture specimen using high-resolution X-ray Computed Tomography (CT) images.The existing three dimensional (3D) particles matching methods based on two dimensional (2D) continuous cross-sections were analyzed and a new 'overlap area method' was presented.After the 3D particles were extracted one by one successfully,the basic parameters of each aggregate:perimeter,area,surface area,and volume were calculated by chain code method.Finally,the 3D mass center coordinates and the sphericity index were introduced.

Multi-dimensional blind separation method for STBC systems

Intercepted signal blind separation is a research topic with high importance for both military and civilian communication systems. A blind separation method for space-time block code （STBC） systems is proposed by using the ordinary independent component analysis （ICA）. This method cannot work when specific complex modulations are employed since the assumption of mutual independence cannot be satisfied. The analysis shows that source signals, which are group-wise independent and use multi-dimensional ICA （MICA） instead of ordinary ICA, can be applied in this case. Utilizing the block-diagonal structure of the cumulant matrices, the JADE algorithm is generalized to the multidimensional case to separate the received data into mutually independent groups. Compared with ordinary ICA algorithms, the proposed method does not introduce additional ambiguities. Simulations show that the proposed method overcomes the drawback and achieves a better performance without utilizing coding information than channel estimation based algorithms.

LOW-DIMENSIONAL STRUCTURES:SP ARSE CODING FOR NEURONAL ACTIVITY

Neuronal ensemble activity codes working memory.In this work,we developed a neuronal ensemble sparse coding method,which can effectively reduce the dimension of the neuronal activity and express neural coding.Multichannel spike trains were recorded in rat prefrontal cortex during a work memory task in Y-maze.As discretesignals,spikes were transferred into cont inuous signals by estinating entropy.Then the normalized continuous signals were decomposed via non-negative sparse met hod.The non-negative components were extracted to reconstruct a low-dimensional ensemble,while none of the feature components were missed.The results showed that,for well-trained rats,neuronal ensemble activities in the prefrontal cortex changed dynamically during the.working memory task.And the neuronal ensemble is more explicit via using non-negative sparse coding.Our results indicate that the neuronal ensemblesparse coding method can effectively reduce the dimnension of neuronal activity and it is a useful tool to express neural coding.

3-Dimensional Body Measurement Technology

3 - dimensional body measurement technology, the basis of developing high technology in industry, accelerates digital development of aplparel industry. This paper briefly introduces the history of 3 - dimensional body measurement technology, and recounts the principle and primary structure of some types of 3 - dimensional automatic body measurement system. With this understanding, it discusses prospect of 3- dimensional CAD and virtual technology used in apparel industry.

Multi-dimensional ambiguity function for subarray-based space-time coding radar

Space-time coding radar has been recently proposed and investigated.It is a radar framework which can perform transmit beamforming at the receiver.However,the range resolution decreases when the number of the transmit element increases.A subarray-based space-time coding(sub-STC)radar is explored to alleviate the range resolution reduction.For the proposed radar configuration,an identical waveform is transmitted and it introduces a small time offset in different subarrays.The multidimensional ambiguity function of sub-STC radar is defined by considering resolutions in multiple domains including the range,Doppler,angle and probing direction.Analyses on properties of the multi-dimensional ambiguity function of the sub-STC radar with regard to the spatial coverage,resolution performance and low sidelobes are also given.Results reveal that the range resolution and low sidelobes performance are improved with the proposed approach.

基于RT-Thread的二维码导航移动机器人设计

针对现有基于速度模式二维码导航纠偏算法存在的计算量大、控制逻辑复杂、控制精度不高等问题,提出了基于位置模式的二维码导航纠偏算法,基于嵌入式实时操作系统RT-Thread设计了自主导航移动机器人。经实验验证,本算法简洁、高效、计算量小,可以实现移动机器人的精确、高效、稳定、可靠导航。

回流罩结构Z-箍缩实验的数值模拟

采用二维磁驱动数值模拟程序(MDSC2)对大电流脉冲功率装置FP-2上的回流罩结构Z-箍缩实验exp90和exp60进行了数值模拟。数值模拟表明,回流罩结构Z-箍缩实验测量电流/回路电流不是负载套筒电流,回流罩结构Z-箍缩实验中回路电流不完全从负载套筒通过,回路电流和负载套筒电流之间存在一个结构系数,提出了边界磁场强度与回路电流关系的新公式。采用具有结构系数的边界磁场强度公式和磁流体力学程序能正确模拟exp90和exp60两个回流罩结构Z-箍缩实验,模拟的套筒内径运动速度和实验测量速度相一致。回流罩结构Z-箍缩实验的结构系数为一常数,仅由回流罩的初始结构确定。90 mm和60 mm内直径套筒的结构系数分别为0.87和0.90。在套筒初始厚度、绝缘材料等其它条件相同的情况下,套筒内径越大,回流罩结构Z-箍缩实验的结构系数越小。

Integrated management system of agro-fishery products based on QR-code

Recently,both the importance and awareness relating to food safety relating to agrochemicals,chemical fertilizers,the pollution of ecosystem and unwholesome foods are growing rapidly.For the same reason,the purchaser's curiosity increases to know about the production process which can be accomplished by production traceability system.The traceability system can store and superintend the specific attribute information about products regarding the productive centre,producer and production finish data.The products undergo various circulation processes and they are being managed by individually constructed traceability system.Thus,it is difficult for the producer and the consumer to guarantee the safety from transpirable issues about the falsification of production traceability because the traceability information can be re-produced by forging through various ways.So in this paper,we proposed a system for integrated management of agro-fishery products based on quick response code(QR-code)for forgery prevention which may help to solve these issues.The proposed system makes QR-code using production information provided by producer.And then it is provided to the distributor and the consumer through integrated service model using the QR-code.Therefore,this system make sure to provide the same production traceability about the products to the distributor and the consumer and always keeps both updated with the same information.

Parametric study on single shot peening by dimensional analysis method incorporated with finite element method

Shot peening is a widely used surface treatment method by generating compressive residual stress near the surface of metallic materials to increase fatigue life and re- sistance to corrosion fatigue, cracking, etc. Compressive re- sidual stress and dent profile are important factors to eval- uate the effectiveness of shot peening process. In this pa- per, the influence of dimensionless parameters on maximum compressive residual stress and maximum depth of the dent were investigated. Firstly, dimensionless relations of pro- cessing parameters that affect the maximum compressive residual stress and the maximum depth of the dent were de- duced by dimensional analysis method. Secondly, the in- fluence of each dimensionless parameter on dimensionless variables was investigated by the finite element method. Fur- thermore, related empirical formulas were given for each di- mensionless parameter based on the simulation results. Fi- nally, comparison was made and good agreement was found between the simulation results and the empirical formula, which shows that a useful approach is provided in this pa- per for analyzing the influence of each individual parameter.

THE TRUE DIMENSION OF CERTAIN ALTERNANT CODES

By applying a result from geometric Goppa codes, due to H.Schtenoth, the true dimension of certain alternant codes is calculated. The results lead in many cases to an improvement of the usual lower bound for the dimension.

ON THE DIMENSION AND MINIMUM DISTANCE OF BCH CODES OVER GF(q)

In this paper, only narrow-sense primitive BCH codes over GF(q) are considered. A formula, that can be used in many cases, is first presented for computing the dimension of BCH codes. It improves the result given by MacWilliams and Sloane in 1977. A new method for finding the dimension of all types of BCH codes is proposed. In second part, it is proved that the BCH bound is the leader of some cyclotomic coset, and we guess that the minimum distance for any BCH code is also the leader of some cyclotomic coset.

A Compression Algorithm of Hyperspectral Remote Sensing Image Based on 3-D Wavelet-Fractal Coder

In this paper, the 3-D Wavelet-Fractal coder was used to compress the hyperspectral remote sensing image, which is a combination of 3-D improved set partitioning in hierarchical trees （SPIHT） coding and 3-D fractal coding. Hyperspectral image date cube was first translated by 3-D wavelet and the 3-D fractal compression ceding was applied to lowest frequency subband. The remaining coefficients of higher frequency sub-bands were encoding by 3-D improved SPIHT. We used the block set instead of the hierarchical trees to enhance SPIHT＇s flexibility. The classical eight kinds of affme transformations in 2-D fractal image compression were generalized to nineteen for the 3-D fractal image compression. The new compression method had been tested on MATLAB. The experiment results indicate that we can gain high compression ratios and the information loss is acceptable.

Extending and analysis of X-Code

X-Code is one of the most important redundant array of independent disk （RAID）-6 codes which are capable of tolerating double disk failures. However, the code length of X-Code is restricted to be a prime number, and such code length restriction of X-Code limits its usage in the real storage systems. Moreover, as a vertical RAID-6 code, X-Code can not be extended easily to an arbitrary code length like horizontal RAID-6 codes. In this paper, a novel and efficient code shortening algorithm for X-Code is proposed to extend X-Code to an arbitrary length. It can be further proved that the code shortening algorithm maintains the maximum-distance-separable （MDS） property of X-Code, and namely, the shortened X-Code is still MDS code with the optimal space efficiency. In the context of the shortening algorithm for X-Code, an in-depth performance analysis on X-Code at consecutive code lengths is conducted, and the impacts of the code shortening algorithm on the performance of X-Code in various performance metrics are revealed.

Low-Complexity Optimization Algorithm for Irregular Low-Density Parity-Check Codes

A low-complexity algorithm is proposed in this paper in order to optimize irregular low-density parity-check （LDPC） codes.The algorithm proposed can calculate the noise threshold by means of a one-dimensional density evolution and search the optimal degree profiles with fast-convergence differential evolution,so that it has a lower complexity and a faster convergence speed.Simulation resuits show that the irregular LDPC codes optimized by the presented algorithm can also perform better than Turbo codes at moderate block length even with less computation cost.

Optimization of Process Parameters of Continuous Microwave Drying Raspberry Puree Based on RSM and ANN-GA

To improve drying uniformity and anthocyanin content of the raspberry puree dried in a continuous microwave dryer,the effects of process parameters(microwave intensity,air velocity,and drying time)on evaluation indexes(average temperature,average moisture content,average retention rate of the total anthocyanin content,temperature contrast value,and moisture dispersion value)were investigated via the response surface method(RSM)and the artificial neural network(ANN)with genetic algorithm(GA).The results showed that the microwave intensity and drying time dominated the changes of evaluation indexes.Overall,the ANN model was superior to the RSM model with better estimation ability,and higher drying uniformity and anthocyanin retention rate were achieved for the ANN-GA model compared with RSM.The optimal parameters were microwave intensity of 5.53 W•g^(-1),air velocity of 1.22 m·s^(-1),and drying time of 5.85 min.This study might provide guidance for process optimization of microwave drying berry fruits.

AN ALGORITHM FOR LINE GENERATION BASED ON SEGMENT CODE IN PAN-EUCLIDEAN GEOMETRY

In Comparison with the traditional point-by-point line generation method,the method we present is based on segment code in Pan-Euclidean geometric space and is quite different in re- spect of running speed and theoretical basis.This paper presents an approach of using segment code to draw straight lines and shows the characteristics of a digital line.It is a newly proposed al- gorithm applicable in CAD.