Thermally regenerative batteries(TRBs) are promising for harvesting low-grade waste heat into electrical power. However, the ammonia crossover from anode to cathode causes self-discharge and then leads to the decay of...Thermally regenerative batteries(TRBs) are promising for harvesting low-grade waste heat into electrical power. However, the ammonia crossover from anode to cathode causes self-discharge and then leads to the decay of capacity. To alleviate the ammonia crossover and improve electricity generation, a stable graphene oxide(GO) modified anion exchange membrane(AEM) was proposed. Compared with the original AEM, the GO modified AEM with a 39.5% lower ammonia permeability induces a 24.3% higher maximal power output and 20.2% higher energy density in TRBs. Together with the visualization result,it was demonstrated the ammonia crossover was effectively alleviated by GO modifying the AEM not at a cost of the reduced battery performance, indicating the promising application in future TRBs.展开更多
In this study, a porous inserted regenerative thermal oxidizer （PRTO） system was developed for a 125 kW industrial copper-melting furnace, due to its advantages of low NOr emissions and high radiant efficiency. Zirc...In this study, a porous inserted regenerative thermal oxidizer （PRTO） system was developed for a 125 kW industrial copper-melting furnace, due to its advantages of low NOr emissions and high radiant efficiency. Zirconium dioxide （ZrOz） ce- ramic foams were placed into the combustion zone of a regenerative thermal oxidizer （RTO）. Different performance characteris- tics of the RTO and PRTO systems, including pressure drop, temperature distribution, emissions, and energy efficiency, were evaluated to study the effects of the porous inserts on non-premixed CH4 combustion. It was found that the PRTO system achieved a significant reduction in the NOx emission level and a fuel saving of approximately 30% compared to the RTO system. It is most suitable for a lean combustion process at an equivalence ratio 〈0.4 with NOx and CO emission levels within 0.002%~）.003% and 0.001%q3.002%, respectively.展开更多
In order to employ the waste heat effectively,a novel three-stage integrated system based upon a solid oxide fuel cell(SOFC),an alkali metal thermoelectric converter(AMTEC)and thermally regenerative electrochemical cy...In order to employ the waste heat effectively,a novel three-stage integrated system based upon a solid oxide fuel cell(SOFC),an alkali metal thermoelectric converter(AMTEC)and thermally regenerative electrochemical cycles(TRECs)is put forward.Considering the main electrochemically and thermodynamically irreversible losses,the power output and the efficiency of the subsystems and the integrated system are compared,and optimally operating regions for the current density,the power output,and the efficiency of the integrated system are explored.Calculations demonstrate that the maximum power density of the considered system is up to 7466 W/m2,which allows 18%and 74%higher than that of the conventional SOFC-AMTEC device and the stand-alone fuel cell model,respectively.It is proved that the considered system is an efficient approach to boost energy efficiency.Moreover,the influence of several significant parameters on the comprehensive performance of the integrated system is expounded in detail,including the electrolyte thickness of the SOFC,the leakage resistance of the SOFC,and the area ratio between the SOFC electrode and the AMTEC subsystem.展开更多
基金supported by Innovative Research Group Project of National Natural Science Foundation of China (No. 52021004)National Natural Science Foundation of China (No. 51976018)+1 种基金Scientific Research Foundation for Returned Overseas Chinese Scholars of Chongqing, China (No. cx2021088)Research Funds of Key Laboratory of Low-grade Energy Utilization Technologies and Systems (No. LLEUTS-2018005)。
文摘Thermally regenerative batteries(TRBs) are promising for harvesting low-grade waste heat into electrical power. However, the ammonia crossover from anode to cathode causes self-discharge and then leads to the decay of capacity. To alleviate the ammonia crossover and improve electricity generation, a stable graphene oxide(GO) modified anion exchange membrane(AEM) was proposed. Compared with the original AEM, the GO modified AEM with a 39.5% lower ammonia permeability induces a 24.3% higher maximal power output and 20.2% higher energy density in TRBs. Together with the visualization result,it was demonstrated the ammonia crossover was effectively alleviated by GO modifying the AEM not at a cost of the reduced battery performance, indicating the promising application in future TRBs.
文摘In this study, a porous inserted regenerative thermal oxidizer （PRTO） system was developed for a 125 kW industrial copper-melting furnace, due to its advantages of low NOr emissions and high radiant efficiency. Zirconium dioxide （ZrOz） ce- ramic foams were placed into the combustion zone of a regenerative thermal oxidizer （RTO）. Different performance characteris- tics of the RTO and PRTO systems, including pressure drop, temperature distribution, emissions, and energy efficiency, were evaluated to study the effects of the porous inserts on non-premixed CH4 combustion. It was found that the PRTO system achieved a significant reduction in the NOx emission level and a fuel saving of approximately 30% compared to the RTO system. It is most suitable for a lean combustion process at an equivalence ratio 〈0.4 with NOx and CO emission levels within 0.002%~）.003% and 0.001%q3.002%, respectively.
文摘In order to employ the waste heat effectively,a novel three-stage integrated system based upon a solid oxide fuel cell(SOFC),an alkali metal thermoelectric converter(AMTEC)and thermally regenerative electrochemical cycles(TRECs)is put forward.Considering the main electrochemically and thermodynamically irreversible losses,the power output and the efficiency of the subsystems and the integrated system are compared,and optimally operating regions for the current density,the power output,and the efficiency of the integrated system are explored.Calculations demonstrate that the maximum power density of the considered system is up to 7466 W/m2,which allows 18%and 74%higher than that of the conventional SOFC-AMTEC device and the stand-alone fuel cell model,respectively.It is proved that the considered system is an efficient approach to boost energy efficiency.Moreover,the influence of several significant parameters on the comprehensive performance of the integrated system is expounded in detail,including the electrolyte thickness of the SOFC,the leakage resistance of the SOFC,and the area ratio between the SOFC electrode and the AMTEC subsystem.
