Star Movement Is Not Predicted Two-Compartment Model of the Universe

A two-compartment model of the universe is proposed to further refine Albert Einstein’s insight into curvature of space and the energy tensor. The two compartments are energy contained by a shell prism. The model allows for a non-unification of fundamental forces with gravity resulting from the curvature of a space-time prism. Carrier forces travel within the prism and particles emerge from the prism. Giving a thickness to the manifold negates infinity and will allow solutions at both microscopic and cosmic levels. Geometry is the link between quantum mechanics and general relativity. Negative entropy, as proposed by Erwin Schrödinger, gives order to particles and the cosmic. The source of this energy is in the shell of the containment vessel. The acceleration of the expansion of the universe occurred when energy within the container transformed into mass, warping the space-time container and causing an explosion of the container. Star movement is explained by the surface tension of the prism of space-time.

Establishment and evaluation of an improved rat model of open abdomen

Introduction:This study aimed to establish an animal model of open abdomen(OA)through temporary abdominal closure via different techniques.Methods:Adult male Sprague-Dawley rats were randomly divided into three groups:group A(OA with polypropylene mesh alone);group B(OA with polypro-pylene mesh combined with a patch);and group C(OA with polypropylene mesh and a sutured patch).Vital signs,pathophysiological changes,and survival rates were closely monitored in the rats for 7 days after surgery.Abdominal X-rays and histopathological examinations were performed to assess abdominal organ changes and wound healing.Results:The results showed no significant difference in mortality rates among the three groups(p>0.05).However,rats in group B exhibited superior overall condi-tion,cleaner wounds,and a higher rate of wound healing compared to the other groups(p<0.05).Abdominal X-rays indicated that varying degrees of distal intestinal obstruction in all groups.Histopathological examinations revealed fibrous hyperpla-sia,inflammatory cell infiltration,neovascularization,and collagen deposition in all groups.Group B demonstrated enhanced granulation tissue generation,neovasculari-zation,and collagen deposition compared to the other groups(p<0.05).Conclusions:Polypropylene mesh combined with patches is the most suitable method for establishing an animal model of OA.This model successfully replicated the patho-logical and physiological changes in postoperative patients with OA,specifically the progress of abdominal skin wound healing.It provides a practical and reliable animal model for OA research.

基于CAPE-OPEN标准的简捷炼油过程建模及常减压蒸馏流程在线模拟

简捷炼油过程模型广泛应用于运行监测、在线计算、实时优化等领域,但大多数模型只是将输入、输出变量进行关联,无法计算出各组分流量组成,难以集成在模拟软件中进行全流程模拟。本研究简化了炼油分离过程,开发了基于CAPE-OPEN标准的简捷炼油塔模型。首先,将炼油过程简化为连续的分离单元,根据实际产品数据校正模型参数,实现某一实际工况流程模拟;其次,将模型参数与实际工况操作变量数据相结合,采用径向基函数插值确定操作变量对模型参数的影响关系,实现多种工况流程模拟;最后,通过常减压蒸馏工业装置实例的3种工况进行验证。结果表明:各工况模拟结果与Aspen计算结果相比,初馏塔塔顶油馏出温度点偏差大多在2%以内,常减压蒸馏塔各侧线油的馏出温度点平均偏差在3%以内;与实际结果相比,平均误差都在5%以内,符合工程允许误差范围要求。所建模型的计算速度快,各塔均在0.2 s左右完成计算,适用于在线生产、调度等。

Effect of Time Step Size and Turbulence Model on the Open Water Hydrodynamic Performance Prediction of Contra-Rotating Propellers

A growing interest has been devoted to the contra-rotating propellers （CRPs） due to their high propulsive efficiency, torque balance, low fuel consumption, low cavitations, low noise performance and low hull vibration. Compared with the single-screw system, it is more difficult for the open water performance prediction because forward and aft propellers interact with each other and generate a more complicated flow field around the CRPs system. The current work focuses on the open water performance prediction of contra-rotating propellers by RANS and sliding mesh method considering the effect of computational time step size and turbulence model. The validation study has been performed on two sets of contra-rotating propellers developed by David W Taylor Naval Ship R ＆ D center. Compared with the experimental data, it shows that RANS with sliding mesh method and SST k-ω turbulence model has a good precision in the open water performance prediction of contra-rotating propellers, and small time step size can improve the level of accuracy for CRPs with the same blade number of forward and aft propellers, while a relatively large time step size is a better choice for CRPs with different blade numbers.

Evaluation of the effect of geometrical parameters on stope probability of failure in the open stoping method using numerical modeling

Stress-induced failure is among the most common causes of instability in Canadian deep underground mines.Open stoping is the most widely practiced underground excavation method in these mines,and creates large stopes which are subjected to stress-induced failure.The probability of failure(POF)depends on many factors,of which the geometry of an open stope is especially important.In this study,a methodology is proposed to assess the effect of stope geometrical parameters on the POF,using numerical modelling.Different ranges for each input parameter are defined according to previous surveys on open stope geometry in a number of Canadian underground mines.A Monte-Carlo simulation technique is combined with the finite difference code FLAC3D,to generate model realizations containing stopes with different geometrical features.The probability of failure(POF)for different categories of stope geometry,is calculated by considering two modes of failure;relaxation-related gravity driven(tensile)failure and rock mass brittle failure.The individual and interactive effects of stope geometrical parameters on the POF,are analyzed using a general multi-level factorial design.Finally,mathematical optimization techniques are employed to estimate the most stable stope conditions,by determining the optimal ranges for each stope’s geometrical parameter.

A Comparative Study on Open Circuit Voltage Models for Lithium-ion Batteries

The current research of state of charge(SoC) online estimation of lithium-ion battery(LiB) in electric vehicles(EVs)mainly focuses on adopting or improving of battery models and estimation filters. However, little attention has been paid to the accuracy of various open circuit voltage(OCV) models for correcting the SoC with aid of the ampere-hour counting method. This paper presents a comprehensive comparison study on eighteen OCV models which cover the majority of models used in literature. The low-current OCV tests are conducted on the typical commercial LiFePO/graphite(LFP) and LiNiMnCoO/graphite(NMC) cells to obtain the experimental OCV-SoC curves at different ambient temperature and aging stages. With selected OCV and SoC points from experimental OCV-SoC curves, the parameters of each OCV model are determined by curve fitting toolbox of MATLAB 2013. Then the fitting OCV-SoC curves based on diversified OCV models are also obtained. The indicator of root-mean-square error(RMSE) between the experimental data and fitted data is selected to evaluate the adaptabilities of these OCV models for their main features, advantages,and limitations. The sensitivities of OCV models to ambient temperatures, aging stages, numbers of data points,and SoC regions are studied for both NMC and LFP cells. Furthermore, the influences of these models on SoC estimation are discussed. Through a comprehensive comparison and analysis on OCV models, some recommendations in selecting OCV models for both NMC and LFP cells are given.

A novel high resolution model without open boundary conditions applied to the China Seas: first investigation on tides

We developed a Global Ocean Circulation and Tide Model （GOCTM） with coarse grids in the open deep ocean degrading ‘smoothly’ into the highly resolved China Seas （CS） of refined grids to study the tides and circulation there.GOCTM is based on the framework of the Finite Volume approach for better mass conservation through improved transports across the discrete individual control volume.It also takes a full advantage of the geometric flexibility of unstructured mesh using a realistic global topography including the Arctic Ocean.The CS are given a special focus by refining the unstructured grids,but they are embedded into global domain naturally.Furthermore,GOCTM not only successfully avoids the treatment of the open boundaries,but also optimizes the trade-off between computational cost and model accuracy.Meanwhile,GOCTM is driven by the astronomical tide-generating potential and the secondary tide-generating potential directly,together with the wind stress and heat flux.GOCTM succeeds in reproducing the global eight principal tidal harmonic constants.Particularly,the simulated tidal results in the CS are improved compared to some other regional models with the discrepancy of 3.9 cm for M 2 tide.This idea of GOCTM can also be referred for other regional ocean study.

Integrability of N-Component Bariev Model Under Open Boundary Conditions

N-component Bariev model for correlated hopping under open boundary conditions in one dimension is studied in the framework of Bethe ansatz method. The energy spectrum and the related Bethe ansatz equations are obtained.

A new diagnostic model of primary open angle glaucoma based on FD-OCT parameters

AIM： To build a clinical diagnostic model of primary open angle glaucoma （POAG） using the normal probability chart of frequency-domain optical coherence tomography （FD-OCT）. METHODS： This is a cross-sectional study. Total 133 eyes from 133 healthy subjects and 99 eyes from 99 early POAG patients were included in the study. The retinal nerve fibre layer （RNFL） thickness parameters of optic nerve head （ONH） and RNFL3.45 scan were measured in one randomly selected eye of each subject using RTVue-100 FD-OCT. Then, we used these parameters to establish the diagnostic models. Four different diagnostic models based on two different area partition strategies on ONH and RNFL3.45 parameters, including ONH traditional area partition model （ONH-T）, ONH new area partition model （ONH-N）, RNFL3.45 traditional area partition model （RNFL3.45-T） and RNFL3.45 new area partition model （RNFL3.45-N）, were built and tested by cross-validation. RESULTS： The new area partition models had higher area under the receiver operating characteristic （AROC; ONH-N： 0.990; RNFL3.45-N： 0.939） than corresponding traditional area partition models （ONH-T： 0.979; RNFL3.45-T： 0.881）. There was no statistical difference among AROC of ONH-T, ONH-N, and RNFL3.45-N. Nevertheless, ONH-N was the simplest model. CONCLUSION： The new area partition models had higher diagnostic accuracy than corresponding traditional area partition models, which can improve the diagnostic ability of early POAG. In particular, the simplest ONH-N diagnostic model may be convenient for clinical application.

Contaminated open fracture and crush injury: a murine model

Modern warfare has caused a large number of severe extremity injuries, many of which become infected. In more recent conflicts, a pattern of co-infection with Acinetobacter baumannii and methicillin-resistant Staphylococcus aureus has emerged. We attempted to recreate this pattern in an animal model to evaluate the role of vascularity in contaminated open fractures. Historically, it has been observed that infected bones frequently appear hypovascular, but vascularity in association with bone infection has not been examined in animal models. Adult rats underwent femur fracture and muscle crush injury followed by stabilization and bacterial contamination with A. baumannii complex and methicillin-resistant Staphylococcus aureus.Vascularity and perfusion were assessed by micro CT angiography and SPECT scanning, respectively, at 1, 2 and 4 weeks after injury. Quantitative bacterial cultures were also obtained. Multi-bacterial infections were successfully created, with methicillin-resistant S. aureus predominating. There was overall increase in blood flow to injured limbs that was markedly greater in bacteria-inoculated limbs. Vessel volume was greater in the infected group. Quadriceps atrophy was seen in both groups, but was greater in the infected group. In this animal model, infected open fractures had greater perfusion and vascularity than non-infected limbs.

Intelligent back analysis of geotechnical parameters for time-dependent rock mass surrounding mine openings using grey Verhulst model

In this paper,we present a new method of intelligent back analysis(IBA)using grey Verhulst model(GVM)to identify geotechnical parameters of rock mass surrounding tunnel,and validate it via a test for a main openings of−600 m level in Coal Mine“6.13”,Democratic People's Republic of Korea.The displacement components used for back analysis are the crown settlement and sidewalls convergence monitored at the end of the openings excavation,and the final closures predicted by GVM.The non-linear relation between displacements and back analysis parameters was obtained by artificial neural network(ANN)and Burger-creep viscoplastic(CVISC)model of FLAC3D.Then,the optimal parameters were determined for rock mass surrounding tunnel by genetic algorithm(GA)with both groups of measured displacements at the end of the final excavation and closures predicted by GVM.The maximum absolute error(MAE)and standard deviation(Std)between calculated displacements by numerical simulation with back analysis parameters and in situ ones were less than 6 and 2 mm,respectively.Therefore,it was found that the proposed method could be successfully applied to determining design parameters and stability for tunnels and underground cavities,as well as mine openings and stopes.

NPV risk simulation of an open pit gold mine project under the O'Hara cost model by using Gas

This paper analyzes an open pit gold mine project based on the O'Hara cost model. Hypothetical data is proposed based on different authors that have studied open pit gold projects, and variations are proposed according to the probability distributions associated to key variables affecting the NPV, like production level, ore grade, price of ore, and others, so as to see what if, in a gold open pit mine project of 3000 metric tons per day of ore. Two case scenarios were analyzed to simulate the NPV, one where there is low certainty data available, and the other where the information available is of high certainty. Results based on genetic algorithm metaheuristic simulations, which combine basically Montecarlo simulations provided by the Palisade Risk software, the O'Hara cost model, net smelter return and financial analysis tools offered by Excel are reported, in order to determine to which variables of the project is more sensitive the NPV.

Modeling Open Software Architectures of Robot Controllers: A Brief Survey of Modeling Methods and Developing Methods

Openness is one of the features of modern robot controllers. Although many modeling technologies have been discussed to model and develop open robot controllers, the focus is always on modeling methodology. The relation between the former and the latter is usually ignored. According to the general software architecture of open robot controllers, this paper discusses modeling and developing methods. And the relation between the typical ones is analyzed.

An Research on the Model Design of the Academic Education's Credit Transfer in the Open University

Based on the analyses of the credit bank both at home and abroad, explore the effective way to construct the credit transfer model, find out the main problems in the process of transferring, design a much better model, formulate a new standard for credit transfer and carry out the research on the model design of the academic education's credit transfer in the open university.

Quality Models for Open, Flexible, and Online Learning

This article is based on research conducted for the European CommissionEducation & Training 2020 working group on digital and online learning(ET2020 WG-DOL) specifically regarding policy challenges, such as thefollowing: 1) Targeted policy guidance on innovative and open learningenvironments under outcome;2) Proposal for a quality assurance modelfor open and innovative learning environments, its impact on specificassessment frameworks and its implication for EU recognition and transparencyinstruments. The article aims to define quality in open, flexible,and online learning, particularly in open education, open educationalresources (OER), and massive open online courses (MOOC). Hence,quality domains, characteristics, and criteria are outlined and discussed,as well as how they contribute to quality and personal learning so thatlearners can orchestrate and take responsibility for their own learningpathways. An additional goal is to identify the major stakeholders directlyinvolved in open online education and to describe their visions, communalities,and conflicts regarding quality in open, flexible, and online learning.The article also focuses on quality in periods of crisis, such as duringthe pandemic in 2020. Finally, the article discusses the rationale and needfor a model of quality in open, flexible, and online learning based on threemajor criteria for quality: excellence, impact, and implementation fromthe learner’s perspective.

Tri-Intersectional Model of Leadership by Values:A Fuzzy Multi-Criteria Decision Making Open Technology Assessment System

Purpose-Nowadays successful organizations need to be masters at leadership by values to play in a constantly changing and transforming environment.But how can leaders and organizations effectively convene strategic and culture development based on values?This paper presents the Tri-Intersectional Model of Leadership by Values(TMLV)in which leaders and organizations can integrate a sustainable strategy,as well as a culture and value-based management system that simultaneously leverages human,financial,and social resources.With its three essential axes of values(economic-pragmatic,emotional-development,and ethical-social)at their intersection points,it allows leaders to focus on the strategy linkages:innovation-intersection between the economic-pragmatic values axis and the emotional-development values axis-allows them to develop sustainable innovations;survival-intersection between the economic-pragmatic values axis and the ethical-social values axis-enhances their organization’s survival;finally,sensibility-intersection between the economic-pragmatic values axis and the ethical-social values axis-makes them more humane and more socially-responsible.The application of the TMLV,using the Fuzzy Multi-Criteria Decision Making Open Technology Assessment System,can be a great inspiration for stimulating and working with values in organizations,as well as allowing leaders to develop a values-based,high-involvement,and performance-oriented culture.Methodology/Approach-This research considers empirical data analysis of the 37 case studies of the EU-InnovatE project(http//www.euinnovate.com)-a pioneering initiative to align innovation values to integrate the end user into the process of innovation and entrepreneurship related to a sustainable lifestyle and the green economy in Europe-using a fuzzy multiple-criteria decision making method and open technologies system,such as server-side PHP language,MariaDB Database,fork of MYSQL Database Management System,and JavaScript libraries to perform operation directly on the user’s browser.Findings-The application of the TMLV model,considering empirical analysis of the extracted values from the case studies,using the Fuzzy Multi-Criteria Decision Making Open Technology Assessment System,can be a great inspiration for stimulating and working with values in João organizations,as well as allowing leaders to develop suitable strategies and interventions for shaping a sustainable high-performance culture.Research implications-This research can be a starting point for further research to assess the effectiveness of the leadership model based on a decision-making open technology system in any given organization,as well as to invite researchers who have positive passion about working with values to participate in the improvement of this tool.Originality/value-The Tri-Intersectional Model of Leadership by Values using the Fuzzy Multi-Criteria Decision Making Open Technology Assessment System is presented as an evolution in leadership models that may be used to fuel innovation,survival,and a sensibility strategic focus that is necessary to optimize human and organizational performance and deliver effective solutions to the massive array of human,financial,and social problems we face today.

Ocean Model Open Boundary Conditions with Volume, Heat and Salinity Conservation Constraints

Open boundary conditions （OBCs） for a regional ocean model that can be integrated stably over a long timeframe, as well as satisfy the volume, heat and salinity conservation constraints, were developed. First, the idea that the inward and outward flux information can be treated separately in the OBCs was adopted. Second, in order to maintain the property that the volume, heat and salinity remains conserved in the simulation domain, conservation constraints were added to the OBCs, and an inverse method utilized to solve the constraint equations. Ideal experiments were designed to investigate the conservation property, and the OBCs were found to work efficiently to maintain the volume, heat and salinity conservation. It was found that simulations were comparable to observations when the OBCs were applied to a regional ocean model.

Study on Influencing Factors and Planning Model of Mining Quantity about Mineral Resources in Open Pit

According to the particularity of the open pit, the main influencing factors of mining quantity about mineral resources have been summarized systematically in life cycle and the structured hierarchical relation of its influencing factors has been constructed. In the light of the production process of open pit, the functional relationships between investment, mining cost and mining quantity have been defined based on the process of mining and loading so that the relation of the life cycle cost and mining quantity can be set up. And what’s more, in order to obtain the maximum economic profit of mining enterprises in life cycle, the planning model of mining quantity has been established based on the life cycle cost. The rational distribution of mining quantity will have been found on the condition of obtaining optimal solution about the planning model so as to determine scientifically the production scale of mining enterprises from the point of view of the sustainable development.

A Study on Modifying the Calculation Model of Valid Opening Size of Heat-bonded Nonwoven Fabrics

It has been found that there are marked errors in the value of valid opening size of heat-bonded nonwoven fabrics between theoretical calculations and engineering measurements. A new modified theoretical model is advanced in this paper. The equivalent diameter of the pore of a fibre web is used to calculate the valid opening size instead of the maximum diameter of inscribed circle used, because the fibres in practical fibre webs are flexible elastomers with definite diameters and the pore of fibre web may produce deformation in screening teat and engineering usage. The results show that the theoretical calculations coincide well with the engineering measurements. This method offers a theoretical basis for computer simulation to the performance of filters of heatbonded nonwoven fabrics.

Knowledge-Based Multifaceted Modeling Methodology for Open Complex Giant Systems

In this paper, the structure characteristics of open complex giant systems are concretely analysed in depth, thus the view and its significance to support the meta synthesis engineering with manifold knowledge models are clarified. Furthermore, the knowledge based multifaceted modeling methodology for open complex giant systems is emphatically studied. The major points are as follows: (1) nonlinear mechanism and general information partition law; (2) from the symmetry and similarity to the acquisition of construction knowledge; (3) structures for hierarchical and nonhierarchical organizations; (4) the integration of manifold knowledge models; (5) the methodology of knowledge based multifaceted modeling.