An experimental investigation of one-and two-degree of freedom VIV of cylinders

In the paper,an experiment investigation was conducted for one-and two-degree of freedom vortex-induced vibration（VIV） of a horizontally-oriented cylinder with diameter of 11 cm and length of 120 cm.In the experiment,the spring constants in the cross-flow and in-line flow directions were regulated to change the natural vibration frequency of the model system.It was found that,in the one-degree of freedom VIV experiment,a ＂double peak＂ phenomenon was observed in its amplitude within the range of the reduced velocities tested,moreover,a ＂2T＂ wake appeared in the vicinity of the second peak.In the two-degree of freedom VIV experiment,the trajectory of cylinder exhibited a reverse ＂C＂ shape,i.e.,a ＂new moon＂ shape.Through analysis of these data,it appears that,besides the non-dimensional in-line and cross-flow natural vibration frequency ratios,the absolute value of the natural vibration frequency of cylinder is also one of the important parameters affecting its VIV behavior.

Modified Two-Degrees-of-Freedom Internal Model Control for Non-Square Systems with Multiple Time Delays

A modified two-degrees-of-freedom( M-TDOF) internal model control( IMC) method is proposed for non-square systems with multiple time delays and right-half-plane( RHP) zeros. In this method,pseudo-inverse is introduced to design the internal model controller,and a desired closed-loop transfer function is designed to eliminate the unrealizable factors of the derived controller. In addition,set-point tracking and load-disturbance rejection of each process are separately controlled by two controllers. The simulation results show that in addition to high decoupling performance and robustness,the proposed control method also effectively improves loaddisturbance rejection and simultaneously optimizes the input tracking performance and disturbance rejection performance by selecting the parameters of controllers. Furthermore,the higher tolerance of model mismatch is achieved in this paper.

Physical Modeling and Parametric Study on Two-Degree-of-Freedom VIV of A Cylinder near Rigid Wall

Unlike most previous studies on the transverse vortex-induced vibration（VlV） of a cylinder mainly under the wallfree condition （Williamson ＆ Govardhan, 2004）, this paper experimentally investigates the vortex-induced vibration of a cylinder with two degrees of freedom near a rigid wall exposed to steady flow. The amplitude and frequency responses of the cylinder are discussed. The lee wake flow patterns of the cylinder undergoin^g VIV were visualized by employing the hydrogen bubble technique. The effects of the gap-to-diameter ratio （eo/D） and the mass ratio on the vibration amplitude and frequency are analyzed. Comparisons of VIV response of the cylinder are made between one degree （only transverse） and two degrees of freedom （streamwise and transverse） and those between the present study and previous ones. The experimental observation indicates that there are two types of streamwise vibration, i.e. the first streamwise vibration （FSV） with small amplitude and the second streamwise vibration （SSV） which coexists with transverse vibration. The vortex shedding pattern for the FSV is approximately syrmnetric and that for the SSV is ahernate. The first streamwise vibration tends to disappear with the decrease of eo/D. For the case of large gap-to-dianeter ratios （ e.g. eo/D = 0. 54 ～ 1.58）, the maximum amplitudes of the second streamwise vibration and transverse one increase with the increasing gap- to-diameter ratio. But for the case of small gap-to-diameter ratios （e. g. eo/D= 0. 16, 0.23）, the vibration amplitude of the cylinder increases slowly at the initial stage （i.e. at small reduced velocity Vr）, and across the maximum amplitude it decreases quickly at the last stage （i.e. at large Vr）. Within the range of the examined small mass ratio （m 〈 4）, both streamwise and transverse vibration amplitude of the cylinder decrease with the increase of mass ratio for the fixed value of Vr- The vibration range （ in terms of Vr） tends to widen with the decrease of the mass ratio. In the second streamwise vibration region, the vibration frequency of the cylinder with a small mass ratio （ e.g. mx = 1.44） undergoes a jump at a certain Vr＋ The maximum amplitudes of the transverse vibration for two-degree-of-freedom case is larger than that for one-degree-of-freedom case, but the transverse vibration frequency of the cylinder with two degrees of freedom is lower than that with one degree of freedom（transverse）.

Type Synthesis of Two-Degrees-of-Freedom Rotational Parallel Mechanism with Two Continuous Rotational Axes

The two-rotational-degrees-of-freedom（2R） parallel mechanism（PM） with two continuous rotational axes（CRAs） has a simple kinematic model.It is therefore easy to implement trajectory planning,parameter calibration,and motion control,which allows for a variety of application prospects.However,no systematic analysis on structural constraints of the 2R-PM with two CRAs has been performed,and there are only a few types of 2R-PM with two CRAs.Thus,a theory regarding the type synthesis of the 2R-PM with two CRAs is systematically established.First,combining the theories of reciprocal screw and space geometry,the spatial arrangement relationships of the constraint forces applied to the moving platform by the branches are explored,which give the 2R-PM two CRAs.The different distributions of the constraint forces in each branch are also studied.On the basis of the obtained structural constraints of branches,and considering the geometric relationships of constraint forces in each branch,the appropriate kinematic chains are constructed.Through the reasonable configuration of branch kinematic chains corresponding to every structural constraint,a series of new 2R-PMs with two CRAs are finally obtained.

Temperature Control Based on Fuzzy Logic Two-degree-of-freedom Smith Internal Model

According to the characteristics of the large time delay,nonlinearity and the great inertia of temperature control system in biomass pyrolysis reactor,a two-degree-of-freedom Smith internal model controller based on fuzzy control is proposed.Firstly,the mathematical model of the temperature control system is established by using the step response method,and then the two-degree-of-freedom Smith internal model controller is designed,and the good tracking performance and disturbance suppression performance can be obtained by designing the set value tracking controller and interference rejection capability.Secondly,the fuzzy control algorithm is used to realize the on-line tuning of the control parameters of the two-degree-of-freedom Smith internal model algorithm.The simulation results show that,compared with the traditional internal model control,fuzzy internal model PID control and two-degree-of-freedom Smith internal model control,the algorithm proposed in this paper improves the influence of lag time on the control system,realizes the separation control of set point tracking and anti-jamming performance and the self-tuning of control parameters,and improves the control performance of the system.

A novel two-degree-of-freedom spherical ultrasonic motor using three travelling-wave type annular stators

In order to promote the tolerance and controllability of the multi-degree-of-freedom(M-DOF) ultrasonic motor, a novel two-degree-of-freedom(2-DOF) spherical ultrasonic motor using three traveling-wave type annular stators was put forward. Firstly,the structure and working principle of this motor were introduced, especially a spiral spring as the preload applied component was designed for adaptive adjustment. Then, the friction drive model of 2-DOF spherical motor was built up from spatial geometric relation between three annular stators and the spherical rotor which was used to analyze the mechanical characteristics of the motor.The optimal control strategy for minimum norm solution of three stators' angular velocity was proposed, using Moore-Penrose generalized inverse matrix. Finally, a 2-DOF prototype was fabricated and tested, which ran stably and controllably. The maximum no-load velocity and stall torque are 92 r/min and 90 m N·m, respectively. The 2-DOF spherical ultrasonic motor has compact structure, easy assembly, good performance and stable operation.

Time-Domain Analysis of Body Freedom Flutter Based on 6DOF Equation

The reduced weight and improved efficiency of modern aeronautical structures result in a decreasing separation of frequency ranges of rigid and elastic modes.Particularly,a high-aspect-ratio flexible flying wing is prone to body freedomflutter(BFF),which is a result of coupling of the rigid body short-periodmodewith 1st wing bendingmode.Accurate prediction of the BFF characteristics is helpful to reflect the attitude changes of the vehicle intuitively and design the active flutter suppression control law.Instead of using the rigid body mode,this work simulates the rigid bodymotion of the model by using the six-degree-of-freedom(6DOF)equation.A dynamicmesh generation strategy particularly suitable for BFF simulation of free flying aircraft is developed.An accurate Computational Fluid Dynamics/Computational Structural Dynamics/six-degree-of-freedom equation(CFD/CSD/6DOF)-based BFF prediction method is proposed.Firstly,the time-domain CFD/CSD method is used to calculate the static equilibrium state of the model.Based on this state,the CFD/CSD/6DOF equation is solved in time domain to evaluate the structural response of themodel.Then combinedwith the variable stiffnessmethod,the critical flutter point of the model is obtained.This method is applied to the BFF calculation of a flyingwing model.The calculation results of the BFF characteristics of the model agree well with those fromthe modalmethod andNastran software.Finally,the method is used to analyze the influence factors of BFF.The analysis results show that the flutter speed can be improved by either releasing plunge constraint or moving the center ofmass forward or increasing the pitch inertia.

Degree of Freedom Analysis for Holographic MIMO Based on a Mutual-Coupling-Compliant Channel Model

Degree of freedom(DOF)is a key indicator for spatial multiplexing layers of a wireless channel.Traditionally,the channel of a multiple-input multiple-output(MIMO)half-wavelength dipole array has a DOF that equals the antenna number.However,recent studies suggest that the DOF could be less than the antenna number when strong mutual coupling is considered.We utilize a mutual-coupling-compliant channel model to investigate the DOF of the holographic MIMO(HMIMO)channel and give a upper bound of the DOF with strong mutual coupling.Our numerical simulations demonstrate that a dense array can support more DOF per unit aperture as compared with a half-wavelength MIMO system.

Triad-displaced ULAs configuration for non-circular sources with larger continuous virtual aperture and enhanced degrees of freedom

Non-uniform linear array(NULA)configurations are well renowned due to their structural ability for providing increased degrees of freedom(DOF)and wider array aperture than uniform linear arrays(ULAs).These characteristics play a significant role in improving the direction-of-arrival(DOA)estimation accuracy.However,most of the existing NULA geometries are primarily applicable to circular sources(CSs),while they limitedly improve the DOF and continuous virtual aperture for noncircular sources(NCSs).Toward this purpose,we present a triaddisplaced ULAs(Tdis-ULAs)configuration for NCS.The TdisULAs structure generally consists of three ULAs,which are appropriately placed.The proposed antenna array approach fully exploits the non-circular characteristics of the sources.Given the same number of elements,the Tdis-ULAs design achieves more DOF and larger hole-free co-array aperture than its sparse array competitors.Advantageously,the number of uniform DOF,optimal distribution of elements among the ULAs,and precise element positions are uniquely determined by the closed-form expressions.Moreover,the proposed array also produces a filled resulting co-array.Numerical simulations are conducted to show the performance advantages of the proposed Tdis-ULAs configuration over its counterpart designs.

ON THE HOMOCLINIC ORBITS IN A CLASS OF TWO-DEGREE-OF-FREEDOM SYSTEMS UNDER THE RESONANCE CONDITIONS

A class of two-degree-of-freedom systems in resonance with an external, parametric excitation is investigated, the existence of the periodic solutions locked to Omega is proved by the use of the method of multiple scales. This systems can be transformed into the systems of Wiggins under some conditions. A calculating formula which determines the existence of homoclinic orbits of the systems is given.

Set-point Filter Design for a Two-degree-of-freedom Fractional Control System

This paper focuses on a new approach to design(possibly fractional) set-point filters for fractional control systems.After designing a smooth and monotonic desired output signal,the necessary command signal is obtained via fractional input-output inversion.Then,a set-point filter is determined based on the synthesized command signal.The filter is computed by minimizing the 2-norm of the difference between the command signal and the filter step response.The proposed methodology allows the designer to synthesize both integer and fractional setpoint filters.The pros and cons of both solutions are discussed in details.This approach is suitable for the design of two degreeof-freedom controllers capable to make the set-point tracking performance almost independent from the feedback part of the controller.Simulation results show the effectiveness of the proposed methodology.

Design for Two-degree-of-freedom PID Regulator Based on Improved Generalized Extremal Optimization Algorithm

A kind of new design method for two-degree-of-freedom(2DOF)PID regulator was presented,in which,a new global search heuristic--improved generalized extremal optimization(GEO)algorithm is applied to the parameter optimization design of 2DOF PID regulator.The simulated results show that very good dynamic response performance of both command tracking and disturbance rejection characteristics can be achieved simultaneously.At the same time,the comparisons of simulation results with the improved GA,the basic GEO and the improved GEO were given.From the comparisons,it is shown that the improved GEO algorithm is competitive in performance with the GA and basic GEO and is an attractive tool to be used in the design of two-degree-of-freedom PID regulator.

Trimming the Degrees of Freedom via a K^(+) Flux Rectifier for Safe and Long‑Life Potassium‑Ion Batteries

High degrees of freedom(DOF)for K^(+)movement in the electrolytes is desirable,because the resulting high ionic conductivity helps improve potassium-ion batteries,yet requiring support from highly free and flammable organic solvent molecules,seriously affecting battery safety.Here,we develop a K^(+)flux rectifier to trim K ion’s DOF to 1 and improve electrochemical properties.Although the ionic conductivity is compromised in the K^(+)flux rectifier,the overall electrochemical performance of PIBs was improved.An oxidation stability improvement from 4.0 to 5.9 V was realized,and the formation of dendrites and the dissolution of organic cathodes were inhibited.Consequently,the K||K cells continuously cycled over 3,700 h;K||Cu cells operated stably over 800 cycles with the Coulombic efficiency exceeding 99%;and K||graphite cells exhibited high-capacity retention over 74.7%after 1,500 cycles.Moreover,the 3,4,9,10-perylenetetracarboxylic diimide organic cathodes operated for more than 2,100 cycles and reached year-scale-cycling time.We fabricated a 2.18 Ah pouch cell with no significant capacity fading observed after 100 cycles.

Freedom EVO全自动酶联免疫前处理仪故障分析

全自动酶联免疫前处理是一种高自动化酶免诊断分析仪,用于检验科各类样品的液体处理工作。仪器在正常保养的情况下,由于标本量巨大、项目繁多,运行过程中不可避免地会出现故障。以Freedom EVO全自动酶联免疫前处理为例,分析总结使用过程中出现的常见故障及解决方法,以尽快解决故障,提高检验质量和工作效率,确保设备长期有效的运行,供操作及维护人员参考。

The Kinematics Performance of Self-Propelled Full Freedom Filament in Wakes of Flow around Cylinder

In vortex streets, the kinematics performance of self-propelled full freedom filament is closely related to the length and the position of filaments in the flow field. In this paper, the changes of passive propulsion velocity and pressure of full-degree-of-freedom filaments after cylindrical wake were analyzed by 15 sets of experiments when the length and position of filaments were changed. The results show that the propulsive velocity of the filament, it approximately increases first and then decreases with the filament length increasing, and the further away from the center of the cylinder, the smaller the propulsive velocity of the filament. In addition, the longer the filament length and the further it is from the center of the cylinder, the lower the pressure around the filament. Experiments show that filaments without energy input can obtain energy from the surrounding flow field to maintain self-propelled motion. Studying the influence of length and position on the kinematics of filaments is helpful to provide a reference for revealing the hydrodynamic mechanism on passive propulsion process and developing low resistance energy harvesting device in swimming fish movement.

The Prisoner of“Freedom”:Cultural Displacement of Santosh in Naipaul’s In a Free State

In a Free State is a post-colonial novel written by Naipaul.“One out of Many”is one of the stories in this novel to explore the freedom of the culturally rootless.The protagonist,Santosh,lives under the collision between the Indian culture and American culture.In the“crevice”of two different cultures,he is deeply involved in the tumultuous and painful process of cultural displacement.His behaviors in cultural displacement can be divided into three stages.Firstly,he has experienced a“cultural shock”after his arrival in Washington,D.C.as a new comer.Secondly,after being fully exposed to the host culture and American style,he has experienced assimilation and absorption to be like an American.Finally when he escapes from his employer and chooses his own way of living,he finds that he is not free at all because he is confronted with an awkward cultural dilemma:he can neither return to his past life;nor can he aspire to a better future.The anxiety about the dislocation causes misery for his fate.As a result,he becomes a prisoner in an unfamiliar culture,and his“freedom”can only be a rootless“freedom”.

The Conflict and Balance Between Intellectual Property Rights and Public Freedom of Information in the“Anti-circumvention Clause”

There is a long-standing conflict between intellectual property rights and public freedom of information.The continuous development of the“anti-circumvention clause”has caused the conflict to intensify.As a basic human right,freedom of information is being gradually eroded by the expansion of intellectual property rights.The existing research mainly carries on the right balance from the negative protection path,but the positive protection path is more advantageous to realizing the public freedom of information and alleviates the conflict between the two kinds of rights.In practice,there are some problems in the application of the anti-circumvention clause,such as the legality of the aim,the division of the protected part,and the determination of the circumvention.This is mainly due to the lack of restrictions on technical measures,the failure to distinguish between“copyright protection”and“contact control”,and the offside and absence of administrative bodies in practice.We should protect public freedom of information by distinguishing the two measures of copyright protection and contact control and the two torts of access and use,increasing the restrictive conditions for the use of technical protection measures,and changing the functions of administrative supervision agencies.

宪法视野下的婚检制度变革与完善——基于《民法典》第1053条告知义务的履行

《民法典》第1053条对禁婚疾病传统作出重大调整,成为新时代背景下婚检制度设计的重要法律依据。在婚姻宪法保护框架下,“婚姻自由—私人告知—自愿婚检”的传统思路忽略了比“婚姻自由保护”更为根本的“婚姻传统功能保护”。婚姻的公共性及解决相关司法实践难题的客观需要,使得婚检融入履行环节成为可能。从《宪法》到《民法典》再到《婚姻登记条例》,民法典时代婚检制度设计应沿循“婚姻保护—法定告知—弱强制婚检”设计思路,采取“程序强制+形式审查”模式,即当事人于婚前相互告知专业健康检查结论,婚姻登记机关仅要求当事人填写知晓声明并进行必要口头提示而不对告知内容及其真实性进行实质审查。

基于定位法线的工件最少定位点布局规划方法

以建立满足工序需求的工件定位点数量最少的定位布局为目标,以定位法线为介质,基于定位法线的工件定位的几何定理,推论出工件自由度与定位法线关系,获得自由度约束模型的定位法线信息;建立工件自由度数学模型,运用逻辑减运算法则建立工件各类型自由度之间关系,获得自由度模型的规划方案;根据规划方案中的定位法线信息,得出定位点初始布局。利用典型实例详细介绍了基于定位法线进行工件定位点布局规划的应用过程。该方法仅需自由度信息,规划过程简便,适用于各类工件,尤其是复杂工件的初步定位方案设计。

美国教师表达自由的法律标准及实践

美国在规制教师表达自由时有比普通公民更严格的法律标准。其实质标准要求教师在私人生活中模范遵守公序良俗,在教育实践中遵守履职专业规范;形式标准主要有分类规制原则、价值中立原则和公共论坛原理。在规制教师表达时,美国司法审查围绕“教育”形成了教育本位、利益衡平、路径清晰等特点。这些做法对我国完善规制教师表达自由的法规政策有一定参考价值。