Disturbances rejection optimization based on improved two-degree-of-freedom LADRC for permanent magnet synchronous motor systems

Permanent magnet synchronous motor(PMSM)speed control systems with conventional linear active disturbance rejection control(CLADRC)strategy encounter issues regarding the coupling between dynamic response and disturbance suppression and have poor performance in suppressing complex nonlinear disturbances.In order to address these issues,this paper proposes an improved two-degree-of-freedom LADRC(TDOF-LADRC)strategy,which can enhance the disturbance rejection performance of the system while decoupling entirely the system's dynamic and anti-disturbance performance to boost the system robustness and simplify controller parameter tuning.PMSM models that consider total disturbances are developed to design the TDOF-LADRC speed controller accurately.Moreover,to evaluate the control performance of the TDOF-LADRC strategy,its stability is proven,and the influence of each controller parameter on the system control performance is analyzed.Based on it,a comparison is made between the disturbance observation ability and anti-disturbance performance of TDOF-LADRC and CLADRC to prove the superiority of TDOF-LADRC in rejecting disturbances.Finally,experiments are performed on a 750 W PMSM experimental platform,and the results demonstrate that the proposed TDOF-LADRC exhibits the properties of two degrees of freedom and improves the disturbance rejection performance of the PMSM system.

Neural-Network-Based Adaptive Finite-Time Control for a Two-Degree-of-Freedom Helicopter System With an Event-Triggering Mechanism

Helicopter systems present numerous benefits over fixed-wing aircraft in several fields of application.Developing control schemes for improving the tracking accuracy of such systems is crucial.This paper proposes a neural-network(NN)-based adaptive finite-time control for a two-degree-of-freedom helicopter system.In particular,a radial basis function NN is adopted to solve uncertainty in the helicopter system.Furthermore,an event-triggering mechanism(ETM)with a switching threshold is proposed to alleviate the communication burden on the system.By proposing an adaptive parameter,a bounded estimation,and a smooth function approach,the effect of network measurement errors is effectively compensated for while simultaneously avoiding the Zeno phenomenon.Additionally,the developed adaptive finite-time control technique based on an NN guarantees finitetime convergence of the tracking error,thus enhancing the control accuracy of the system.In addition,the Lyapunov direct method demonstrates that the closed-loop system is semiglobally finite-time stable.Finally,simulation and experimental results show the effectiveness of the control strategy.

Dynamic Response of Two-Degree-of-Freedom Riserless Drill String for Vortex-Induced Vibration Suppression and Enhancement

The mechanical behavior,dynamic evolution,and flow-field distribution of a two-degree-of-freedom riserless drill string were simulated numerically by using FLUENT fluid simulation software with the user-defined function embedded.The rotation angular velocities before and after the critical rotation angular velocity were used as independent variables,and the reduced velocity range was 3-14.Fluid-structure coupling was realized based on the dynamic overset grid and the SST k-ωturbulence model.Results reveal that the dynamic response of the riserless drill string was considerably affected by rotation and flow velocity,which are coupled with each other.The cross-flow average dimensionless displacement increased with the rotation angular velocity,and rotation considerably enhanced the in-line maximum average dimensionless displacement.However,the cross-flow amplitude caused by vortex-induced vibration was suppressed when the rotation angular velocity reached a certain value.The in-line and cross-flow frequencies were the same,thereby causing the trajectory to deviate from the standard'figure-eight'shape and become a closed circle shape.The vortex did not fall behind the cylinder at low reduced velocity with high-rotation angular velocity,and the structure of the near-wake vortex remained U-shaped.The wake of the cylinder was deflected along the cross-flow direction,thereby leading to vibration asymmetry and resulting in increased vibration instability and disordered vibration trajectories,especially at high-rotation angular velocities.

A novel two-degree-of-freedom spherical ultrasonic motor using three travelling-wave type annular stators

In order to promote the tolerance and controllability of the multi-degree-of-freedom(M-DOF) ultrasonic motor, a novel two-degree-of-freedom(2-DOF) spherical ultrasonic motor using three traveling-wave type annular stators was put forward. Firstly,the structure and working principle of this motor were introduced, especially a spiral spring as the preload applied component was designed for adaptive adjustment. Then, the friction drive model of 2-DOF spherical motor was built up from spatial geometric relation between three annular stators and the spherical rotor which was used to analyze the mechanical characteristics of the motor.The optimal control strategy for minimum norm solution of three stators' angular velocity was proposed, using Moore-Penrose generalized inverse matrix. Finally, a 2-DOF prototype was fabricated and tested, which ran stably and controllably. The maximum no-load velocity and stall torque are 92 r/min and 90 m N·m, respectively. The 2-DOF spherical ultrasonic motor has compact structure, easy assembly, good performance and stable operation.

ON THE HOMOCLINIC ORBITS IN A CLASS OF TWO-DEGREE-OF-FREEDOM SYSTEMS UNDER THE RESONANCE CONDITIONS

A class of two-degree-of-freedom systems in resonance with an external, parametric excitation is investigated, the existence of the periodic solutions locked to Omega is proved by the use of the method of multiple scales. This systems can be transformed into the systems of Wiggins under some conditions. A calculating formula which determines the existence of homoclinic orbits of the systems is given.

Set-point Filter Design for a Two-degree-of-freedom Fractional Control System

This paper focuses on a new approach to design(possibly fractional) set-point filters for fractional control systems.After designing a smooth and monotonic desired output signal,the necessary command signal is obtained via fractional input-output inversion.Then,a set-point filter is determined based on the synthesized command signal.The filter is computed by minimizing the 2-norm of the difference between the command signal and the filter step response.The proposed methodology allows the designer to synthesize both integer and fractional setpoint filters.The pros and cons of both solutions are discussed in details.This approach is suitable for the design of two degreeof-freedom controllers capable to make the set-point tracking performance almost independent from the feedback part of the controller.Simulation results show the effectiveness of the proposed methodology.

Design for Two-degree-of-freedom PID Regulator Based on Improved Generalized Extremal Optimization Algorithm

A kind of new design method for two-degree-of-freedom(2DOF)PID regulator was presented,in which,a new global search heuristic--improved generalized extremal optimization(GEO)algorithm is applied to the parameter optimization design of 2DOF PID regulator.The simulated results show that very good dynamic response performance of both command tracking and disturbance rejection characteristics can be achieved simultaneously.At the same time,the comparisons of simulation results with the improved GA,the basic GEO and the improved GEO were given.From the comparisons,it is shown that the improved GEO algorithm is competitive in performance with the GA and basic GEO and is an attractive tool to be used in the design of two-degree-of-freedom PID regulator.

Limit cycle oscillation suppression of 2-DOF airfoil using nonlinear energy sink

This paper presents a novel mechanical attachment, i.e., nonlinear energy sink （NES）, for suppressing the limit cycle oscillation （LCO） of an airfoil. The dynamic responses of a two-degree-of-freedom （2-DOF） airfoil coupled with an NES are studied with the harmonic balance method. Different structure parameters of the NES, i.e., mass ratio between the NES and airfoil, NES offset, NES damping, and nonlinear stiffness in the NES, are chosen for studying the effect of the LCO suppression on an aeroelastic system with a supercritical Hopf bifurcation or subcritical Hopf bifurcation, respectively. The results show that the structural parameters of the NES have different influence on the supercritical Hopf bifurcation system and the subcritical Hopf bifurcation system.

Nonlinear dynamics of two degree of freedom systems with linear and nonlinear stiffnesses

In this study, a new analytical approach is developed to analyze the free nonlinear vibration of conservative two-degree-of-freedom （TDOF） systems. The mathematical models of these systems are governed by second--order nonlinear partial differential equations. Nonlinear differential equations were transferred into a single equation by using some intermediate variables. The single nonlinear differential equations are solved by using the first order of the Hamiltonian approach （HA）. Different parameters, which have a significant impact on the response of the systems, are considered and discussed. Some comparisons are presented to verify the results between the Hamiltonian approach and the exact solution. The maximum relative error is less than 2.2124 % for large amplitudes of vibration. It has been established that the first iteration of the Hamiltonian approach achieves very accurate results, does not require any small perturbations, and can be used for a wide range of nonlinear problems.

Dynamical behaviour of a controlled vibro-impact system

In this paper, we give a controlled two-degree-of-freedom （TDOF） vibro-impact system based on the damping control law, and then investigate the dynamical behaviour of this system. According to numerical simulation, we find that this control scheme can suppress chaos to periodic orbit successfully. Furthermore, the feasibility and the robustness of the controller are confirmed, separately. We also find that this scheme cannot only suppress chaos, but also generate chaos in this system.

Numerical simulation of VIV for an elastic cylinder mounted on the spring supports with low mass-ratio

With the development of the offshore deep water oil industry many researchers are focusing on the vortex-induced vibrations （VIV） of deep risers. In the present work, Reynolds-averaged Navier-Stokes （RANS） equations were combined with the SST κ-ω turbulent model to simulate the stream-wise and transverse motion of an elastically mounted cylinder with a low mass-ratio, a natural frequency ratio of fx/fy = 1 and an Re number between 5 300 and 32 000, The four-order Runge-Kutta method was applied to solve the oscillating equation of the cylinder. The relationship between reduced velocity and parameters of the cylinder, including the lift coefficient, the drag coefficient, displacement and the vortex structure were then compared with recent experimental results and discussed in detail. The present numerical simulation reproduced effects have been observed in experiments, such as the lock-in phenomenon, the hysteretic phenomenon and beating behavior.

Robust <i>H</i>_∞Controller for High Precision Positioning System, Design, Analysis, and Implementation

In this paper, a systematic robust control design and analysis for a single axis precise positioner is presented. The effects of uncertainties on closed-loop stability and performance are considered in the H∞ robust controllers design. v-gap metric is utilized to validate the intelligently estimated uncertainty. The robust controllers are formulated within the frame- work of the standard H∞ mixed sensitivity optimization problem. Furthermore, a specially designed integral-H∞ and two-degree-of-freedom 2 DOF H∞ controllers are developed to provide improved robust performance and resolution properties. It is shown that the proposed design schemes are very effective for robust control and precise tracking performance of the servo positioning system.

Singularity analysis of a two-dimensional elastic cable with 1:1 internal resonance

A two-degree-of-freedom bifurcation system for an elastic cable with 1：1 internal resonance is investigated in this paper. The transition set of the system is obtained with the singularity theory for three cases. The whole parametric plane is divided into several different persistent regions by the transition set. The bifurcation diagrams in different persistent regions are obtained.

Manufacture of End－micro－manipulator with Two Degrees of Freedom and its Driving System for Robot

A Robot wrist made of a planar step motor with two-degree-of-freedom has been developed recently for a general robot manipulator used in assembly operation.Mechanism design and the magnetic theory of the motor and the driving system are discussed. The paper also presents several stecial characteritics in designing general step motor (SM) driver This robot end-effector successfully improves the PUMA562 robot's response and locating accuracy.

Conception and Design of Active Balancer for Planar Mechanisms

The dynamic balancing is an important issue in mechanism design. For the existing balancing methods, both passive and active ones, there is still room for improvement in adaplability and independency. In view of this, a concept of active balancer is developed as a new solution for the dynamic balancing with more flexibility. The proposed balancer is an independent additional device with a control system inside, which consists of a two-degree-of-freedom （DOF） linkage and a controllable motor, and can be attached to a machine expediently with little change to its original structure and motion. One of the two inputs of the two-DOF linkage shares the same shaft with its output, which is connected to the input shaft of a machine to be balanced and driven by the original actuator. The other input is driven by the control motor. By properly selecting the speed trajectories of the control motor and link parameters of the two-DOF linkage, one or more dynamic effects of the mechanisms can be minimized or eliminated adaptively. The design procedure of the active balancer is put forward and a two-step optimization is developed to find out optimal design parameters of the balancer for various design requirements and constraints. Taking a force-balanced crank-rocker mechanism as the reference mechanism, numerical examples are given to illustrate the design procedure. The balancing effects of the proposed balancer are compared with those of the existing adding dyads （DYAD） method. The results show that the introduction of the control system provides the active balancer with better balancing effect and more flexibility than the DYAD method. A considerable reduction in the dynamic effects （input torque, shaking moment and shaking force） can be achieved for different balancing object by designing the structural and control parameters of the balancer, and the deterioration of dynamic performance caused by alterative working conditions can be compensated effectively by redesigning the control parameters.

Vibration mechanism analysis and algorithm optimization of contactor contact system

In order to solve the problem of vibration bounce caused by the contact between moving and stationary contacts in the process of switching on,two-degree-of-freedom motion differential equation of the contact system is established.Genetic algorithm is used to optimize the pull in process of AC contactor.The whole process of contact bounce was observed and analyzed by high-speed photography experiment.The theory and experimental results were very similar.The iron core has collided before the contact is separated,which further aggravates the contact bounce.When the iron core bounces collided again,the bounce of the contact was not affected.During the operation of the contactor,the movement of the moving iron core will cause slight vibration of the system.The contact bounce time and the maximum amplitude are reduced.The research results provide a theoretical basis for further control and reduction of contact bounce.

Two-degree-of-freedom H-infinity control of combustion in diesel engine using a discrete dynamics model

This paper proposes an H-infinity combustion control method for diesel engines. The plant model is the discrete dynamics model developed by Yasuda et al., which is implementable on a real engine control unit. We introduce a two-degree-of-freedom control scheme with a feedback controller and a feedforward controller. This scheme achieves both good feedback properties, such as disturbance suppression and robust stability, and a good transient response. The feedforward controller is designed by taking the inverse of the static plant model, and the feedback controller is designed by the H-infinity control method, which reduces the effect of the trubocharger lag. The effectiveness of the proposed method is evaluated in simulations using the nonlinear discrete dynamics model.

Riemannian geometric approach to optimal binocular rotation,pyramid based interpolation and bio-mimetic pan-tilt movement

Over the past several years,we have been studying the problem of optimally rotating a rigid sphere about its center,where the rotation is actuated by a triplet of external torques acting on the body.The control objective is to repeatedly direct a suitable radial vector,called the gaze vector,towards a stationary point target in R^(3).The orientation of the sphere is constrained to lie in a suitable submanifold of SO(3).Historically,the constrained rotational movements were studied by physiologists in the nineteenth century,interested in eye and head movements.In this paper we revisit the gaze control problem,where two visual sensors,are tasked to simultaneously stare at a point target in the visual space.The target position changes discretely and the problem we consider is how to reorient the gaze directions of the sensors,along the optimal pathway of the human eyes,to the new location of the target.This is done by first solving an optimal control problem on the human binocular system.Next,we use these optimal control and show that a pan-tilt system can be controlled to follow the gaze trajectory of the human eye requiring a nonlinear static feedback of the pan and tilt angles and their derivatives.Our problem formulation uses a new Riemannian geometric description of the orientation space.The paper also introduces a new,pyramid based interpolation method,to implement the optimal controller.

Two freedom linear parameter varying μ synthesis control for flight environment testbed

To solve the problem of robust servo performance of Flight Environment Testbed(FET)of Altitude Ground Test Facilities(AGTF) over the whole operational envelope, a two-degree-offreedom μ synthesis method based on Linear Parameter Varying(LPV) schematic is proposed, and meanwhile a new structure frame of μ synthesis control on two degrees of freedom with double integral and weighting functions is presented, which constitutes a core support part of the paper. Aimed at the problem of reference command's rapid change, one freedom feed forward is adopted, while another freedom output feedback is used to meet good servo tracking as well as disturbance and noise rejection; furthermore, to overcome the overshoot problem and acquire dynamic tuning,the integral is introduced in inner loop, and another integral controller is used in outer loop in order to guarantee steady errors; additionally, two performance weighting functions are designed to achieve robust specialty and control energy limit considering the uncertainties in system. As the schedule parameters change over large flight envelope, the stability of closed-loop LPV system is proved using Lyapunov inequalities. The simulation results show that the relative tracking errors of temperature and pressure are less than 0.5% with LPV μ synthesis controller. Meanwhile, compared with non-LPV μ synthesis controller in large uncertainty range, the proposed approach in this research can ensure robust servo performance of FET over the whole operational envelope.

Selection of Observation Position and Orientation in Visual Servoing with Eye-in-vehicle Configuration for Manipulator

In this paper, we propose a method to select the observation position in visual servoing with an eye-in-vehicle configuration for the manipulator. In traditional visual servoing, the images taken by the camera may have various problems, including being out of view, large perspective aberrance, improper projection area of object in images and so on. In this paper, we propose a method to determine the observation position to solve these problems. A mobile robot system with pan-tilt camera is designed, which calculates the observation position based on an observation and then moves there. Both simulation and experimental results are provided to validate the effectiveness of the proposed method.