Infrared false target is an important mean to induce the infrared-guided weapons,and the key issue is how to keep the surface temperature of the infrared false target to be the same as that of the object to be protect...Infrared false target is an important mean to induce the infrared-guided weapons,and the key issue is how to keep the surface temperature of the infrared false target to be the same as that of the object to be protected.One-dimensional heat transfer models of a metal plate and imitative material were established to explore the influences of the thermophysical properties of imitative material on the surface temperature difference（STD） between the metal plate and imitative material which were subjected to periodical ambient conditions.It is elucidated that the STD is determined by the imitative material’s dimensionless thickness（dim*,） and the thermal inertia(Pim).When dim* is above 1.0,the STD is invariable as long as Pim is a constant.And if the dimensionless thickness of metal plate（d,m*） is also larger than 1.0,the STD approaches to zero as long as Pimis the same as the thermal inertia of metal plate（Pm）.When dim* is between 0.08 and 1,the STD varies irregularly with Pim and dim*.However,if dm* is also in the range of 0.08-1,the STD approaches to zero on condition that Pim=Pm and dim*= dm*.If dim*,is below 0.08,the STD is unchanged when Pimdim* is a constant.And if dm* is also less than 0.08,the STD approaches to zero as long as Pimdim* = Pmdm*.Furthermore,an applicationoriented discussion indicates that the imitative material can be both light and thin via the application of the phase change material with a preset STD because of its high specific heat capacity during the phase transition process.展开更多
针对延迟叠加产生密集假目标干扰存在峰均比(Peak-to-Average Power Ratio,PAPR)过高的问题,分析了现有多相序列调制法的适应性。针对其不足,提出了一种利用粒子群算法(Particle Swarm Optimization,PSO)优化干扰波形以降低峰均比的方...针对延迟叠加产生密集假目标干扰存在峰均比(Peak-to-Average Power Ratio,PAPR)过高的问题,分析了现有多相序列调制法的适应性。针对其不足,提出了一种利用粒子群算法(Particle Swarm Optimization,PSO)优化干扰波形以降低峰均比的方法。首先基于雷达发射线性调频脉冲信号,建立延迟叠加产生密集假目标干扰的信号模型。然后以最小化干扰波形的峰均比为目标函数,结合干扰调制参数约束条件形成优化问题。随后利用PSO得到干扰调制参数的次优解,最终通过仿真实验验证了所提方法的有效性。展开更多
文章研究了背景为子空间干扰加高斯杂波的距离扩展目标方向检测问题。杂波是均值为零协方差矩阵未知但具有斜对称特性的高斯杂波,目标与干扰分别通过具备斜对称特性的目标子空间和干扰子空间描述。针对方向检测问题,利用上述斜对称性,...文章研究了背景为子空间干扰加高斯杂波的距离扩展目标方向检测问题。杂波是均值为零协方差矩阵未知但具有斜对称特性的高斯杂波,目标与干扰分别通过具备斜对称特性的目标子空间和干扰子空间描述。针对方向检测问题,利用上述斜对称性,根据广义似然比检验(Generalized Likeli-hood Ratio Test,GLRT)准则的一步与两步设计方法,设计了基于GLRT的一步法与两步法的距离扩展目标方向检测器。通过理论推导证明了这2种检测器相对于未知杂波协方差矩阵都具有恒虚警率。对比相同背景下已有检测器,特别是在辅助数据有限的场景下,文章提出的2个检测器表现出了优越的检测性能。展开更多
A new constant false alarm rate （CFAR） target detector for synthetic aperture radar （SAR） images is developed. For each pixel under test, both the local probability density function （PDF） of the pixel and the cl...A new constant false alarm rate （CFAR） target detector for synthetic aperture radar （SAR） images is developed. For each pixel under test, both the local probability density function （PDF） of the pixel and the clutter PDF in the reference window are estimated by the non-parametric density estimation. The target detector is defined as the mean square error （MSE） distance between the two PDFs. The CFAR detection in SAR images having multiplicative noise is achieved by adaptive kernel bandwidth proportional to the clutter level. In addition, for obtaining a threshold with respect to a given probability of false alarm （PFA）, an unsupervised null distribution fitting method with outlier rejection is proposed. The effectiveness of the proposed target detector is demonstrated by the experiment result using the RADATSAT-2 SAR image.展开更多
Ship detection using synthetic aperture radar(SAR)plays an important role in marine applications.The existing methods are capable of quickly obtaining many candidate targets,but numerous non-ship objects may be wrongl...Ship detection using synthetic aperture radar(SAR)plays an important role in marine applications.The existing methods are capable of quickly obtaining many candidate targets,but numerous non-ship objects may be wrongly detected in complex backgrounds.These non-ship false alarms can be excluded by training discriminators,and the desired accuracy is obtained with enough verified samples.However,the reliable verification of targets in large-scene SAR images still inevitably requires manual interpretation,which is difficult and time consuming.To address this issue,a semisupervised heterogeneous ensemble ship target discrimination method based on a tri-training scheme is proposed to take advantage of the plentiful candidate targets.Specifically,various features commonly used in SAR image target discrimination are extracted,and several acknowledged classification models and their classic variants are investigated.Multiple discriminators are constructed by dividing these features into different groups and pairing them with each model.Then,the performance of all the discriminators is tested,and better discriminators are selected for implementing the semisupervised training process.These strategies enhance the diversity and reliability of the discriminators,and their heterogeneous ensemble makes more correct judgments on candidate targets,which facilitates further positive training.Experimental results demonstrate that the proposed method outperforms traditional tritraining.展开更多
基金funded by the National Natural Science Foundation of China (No. 51576188)
文摘Infrared false target is an important mean to induce the infrared-guided weapons,and the key issue is how to keep the surface temperature of the infrared false target to be the same as that of the object to be protected.One-dimensional heat transfer models of a metal plate and imitative material were established to explore the influences of the thermophysical properties of imitative material on the surface temperature difference（STD） between the metal plate and imitative material which were subjected to periodical ambient conditions.It is elucidated that the STD is determined by the imitative material’s dimensionless thickness（dim*,） and the thermal inertia(Pim).When dim* is above 1.0,the STD is invariable as long as Pim is a constant.And if the dimensionless thickness of metal plate（d,m*） is also larger than 1.0,the STD approaches to zero as long as Pimis the same as the thermal inertia of metal plate（Pm）.When dim* is between 0.08 and 1,the STD varies irregularly with Pim and dim*.However,if dm* is also in the range of 0.08-1,the STD approaches to zero on condition that Pim=Pm and dim*= dm*.If dim*,is below 0.08,the STD is unchanged when Pimdim* is a constant.And if dm* is also less than 0.08,the STD approaches to zero as long as Pimdim* = Pmdm*.Furthermore,an applicationoriented discussion indicates that the imitative material can be both light and thin via the application of the phase change material with a preset STD because of its high specific heat capacity during the phase transition process.
文摘针对延迟叠加产生密集假目标干扰存在峰均比(Peak-to-Average Power Ratio,PAPR)过高的问题,分析了现有多相序列调制法的适应性。针对其不足,提出了一种利用粒子群算法(Particle Swarm Optimization,PSO)优化干扰波形以降低峰均比的方法。首先基于雷达发射线性调频脉冲信号,建立延迟叠加产生密集假目标干扰的信号模型。然后以最小化干扰波形的峰均比为目标函数,结合干扰调制参数约束条件形成优化问题。随后利用PSO得到干扰调制参数的次优解,最终通过仿真实验验证了所提方法的有效性。
文摘文章研究了背景为子空间干扰加高斯杂波的距离扩展目标方向检测问题。杂波是均值为零协方差矩阵未知但具有斜对称特性的高斯杂波,目标与干扰分别通过具备斜对称特性的目标子空间和干扰子空间描述。针对方向检测问题,利用上述斜对称性,根据广义似然比检验(Generalized Likeli-hood Ratio Test,GLRT)准则的一步与两步设计方法,设计了基于GLRT的一步法与两步法的距离扩展目标方向检测器。通过理论推导证明了这2种检测器相对于未知杂波协方差矩阵都具有恒虚警率。对比相同背景下已有检测器,特别是在辅助数据有限的场景下,文章提出的2个检测器表现出了优越的检测性能。
基金supported by the National Natural Science Foundation of China (40871157 41171317)the Foundation of Advance Research of Science and Technology for Chinese National Defence(9140C620201902)
文摘A new constant false alarm rate （CFAR） target detector for synthetic aperture radar （SAR） images is developed. For each pixel under test, both the local probability density function （PDF） of the pixel and the clutter PDF in the reference window are estimated by the non-parametric density estimation. The target detector is defined as the mean square error （MSE） distance between the two PDFs. The CFAR detection in SAR images having multiplicative noise is achieved by adaptive kernel bandwidth proportional to the clutter level. In addition, for obtaining a threshold with respect to a given probability of false alarm （PFA）, an unsupervised null distribution fitting method with outlier rejection is proposed. The effectiveness of the proposed target detector is demonstrated by the experiment result using the RADATSAT-2 SAR image.
基金The National Natural Science Foundation of China under contract No.61971455.
文摘Ship detection using synthetic aperture radar(SAR)plays an important role in marine applications.The existing methods are capable of quickly obtaining many candidate targets,but numerous non-ship objects may be wrongly detected in complex backgrounds.These non-ship false alarms can be excluded by training discriminators,and the desired accuracy is obtained with enough verified samples.However,the reliable verification of targets in large-scene SAR images still inevitably requires manual interpretation,which is difficult and time consuming.To address this issue,a semisupervised heterogeneous ensemble ship target discrimination method based on a tri-training scheme is proposed to take advantage of the plentiful candidate targets.Specifically,various features commonly used in SAR image target discrimination are extracted,and several acknowledged classification models and their classic variants are investigated.Multiple discriminators are constructed by dividing these features into different groups and pairing them with each model.Then,the performance of all the discriminators is tested,and better discriminators are selected for implementing the semisupervised training process.These strategies enhance the diversity and reliability of the discriminators,and their heterogeneous ensemble makes more correct judgments on candidate targets,which facilitates further positive training.Experimental results demonstrate that the proposed method outperforms traditional tritraining.
