Improving model performance in mapping cropland soil organic matter using time-series remote sensing data

Faced with increasing global soil degradation,spatially explicit data on cropland soil organic matter(SOM)provides crucial data for soil carbon pool accounting,cropland quality assessment and the formulation of effective management policies.As a spatial information prediction technique,digital soil mapping(DSM)has been widely used to spatially map soil information at different scales.However,the accuracy of digital SOM maps for cropland is typically lower than for other land cover types due to the inherent difficulty in precisely quantifying human disturbance.To overcome this limitation,this study systematically assessed a framework of“information extractionfeature selection-model averaging”for improving model performance in mapping cropland SOM using 462 cropland soil samples collected in Guangzhou,China in 2021.The results showed that using the framework of dynamic information extraction,feature selection and model averaging could efficiently improve the accuracy of the final predictions(R^(2):0.48 to 0.53)without having obviously negative impacts on uncertainty.Quantifying the dynamic information of the environment was an efficient way to generate covariates that are linearly and nonlinearly related to SOM,which improved the R^(2)of random forest from 0.44 to 0.48 and the R^(2)of extreme gradient boosting from 0.37to 0.43.Forward recursive feature selection(FRFS)is recommended when there are relatively few environmental covariates(<200),whereas Boruta is recommended when there are many environmental covariates(>500).The Granger-Ramanathan model averaging approach could improve the prediction accuracy and average uncertainty.When the structures of initial prediction models are similar,increasing in the number of averaging models did not have significantly positive effects on the final predictions.Given the advantages of these selected strategies over information extraction,feature selection and model averaging have a great potential for high-accuracy soil mapping at any scales,so this approach can provide more reliable references for soil conservation policy-making.

Kinematic-mapping-model-guided analysis and optimization of 2-PSS&1-RR circular-rail parallel mechanism for fully steerable phased array antennas

This paper presents a systematic methodology for analyzing and optimizing an innovative antenna mount designed for phased array antennas, implemented through a novel 2-PSS&1-RR circular-rail parallel mechanism. Initially, a comparative motion analysis between the 3D model of the mount and its full-scale prototype is conducted to validate effectiveness. Given the inherent complexity, a kinematic mapping model is established between the mount and the crank-slider linkage, providing a guiding framework for subsequent analysis and optimization. Guided by this model, feasible inverse and forward solutions are derived, enabling precise identification of stiffness singularities. The concept of singularity distance is thus introduced to reflect the structural stiffness of the mount. Subsequently, also guided by the mapping model, a heuristic algorithm incorporating two backtracking procedures is developed to reduce the mount's mass. Additionally, a parametric finite-element model is employed to explore the relation between singularity distance and structural stiffness. The results indicate a significant reduction(about 16%) in the antenna mount's mass through the developed algorithm, while highlighting the singularity distance as an effective stiffness indicator for this type of antenna mount.

Estimation and mapping of water erosion and soil loss:Application of Gavrilovic erosion potential model(EPM)using GIS and remote sensing in the Assif el mal Watershed,Western high Atlas

Water erosion is a serious problem that leads to soil degradation,loss,and the destruction of structures.Assessing the risk of erosion and determining the affected areas has become crucial in order to understand the main factors influencing its evolution and to minimize its impacts.This study focuses on evaluating the risk of erosion in the Assif el mal watershed,which is located in the High Atlas Mountains.The Erosion Potential Model(EPM)is used to estimate soil losses depending on various parameters such as lithology,hydrology,topography,and morphometry.Geographic information systems and remote sensing techniques are employed to map areas with high erosive potential and their relationship with the distribution of factors involved.Different digital elevation models are also used in this study to highlight the impact of data quality on the accuracy of the results.The findings reveal that approximately 59%of the total area in the Assif el mal basin has low to very low potential for soil losses,while 22%is moderately affected and 19.9%is at high to very high risk.It is therefore crucial to implement soil conservation measures to mitigate and prevent erosion risks.

Intrusion Detection Model Using Chaotic MAP for Network Coding Enabled Mobile Small Cells

Wireless Network security management is difficult because of the ever-increasing number of wireless network malfunctions,vulnerabilities,and assaults.Complex security systems,such as Intrusion Detection Systems(IDS),are essential due to the limitations of simpler security measures,such as cryptography and firewalls.Due to their compact nature and low energy reserves,wireless networks present a significant challenge for security procedures.The features of small cells can cause threats to the network.Network Coding(NC)enabled small cells are vulnerable to various types of attacks.Avoiding attacks and performing secure“peer”to“peer”data transmission is a challenging task in small cells.Due to the low power and memory requirements of the proposed model,it is well suited to use with constrained small cells.An attacker cannot change the contents of data and generate a new Hashed Homomorphic Message Authentication Code(HHMAC)hash between transmissions since the HMAC function is generated using the shared secret.In this research,a chaotic sequence mapping based low overhead 1D Improved Logistic Map is used to secure“peer”to“peer”data transmission model using lightweight H-MAC(1D-LM-P2P-LHHMAC)is proposed with accurate intrusion detection.The proposed model is evaluated with the traditional models by considering various evaluation metrics like Vector Set Generation Accuracy Levels,Key Pair Generation Time Levels,Chaotic Map Accuracy Levels,Intrusion Detection Accuracy Levels,and the results represent that the proposed model performance in chaotic map accuracy level is 98%and intrusion detection is 98.2%.The proposed model is compared with the traditional models and the results represent that the proposed model secure data transmission levels are high.

General mapping of one-dimensional non-Hermitian mosaic models to non-mosaic counterparts:Mobility edges and Lyapunov exponents

We establish a general mapping from one-dimensional non-Hermitian mosaic models to their non-mosaic counterparts.This mapping can give rise to mobility edges and even Lyapunov exponents in the mosaic models if critical points of localization or Lyapunov exponents of localized states in the corresponding non-mosaic models have already been analytically solved.To demonstrate the validity of this mapping,we apply it to two non-Hermitian localization models:an Aubry-Andre-like model with nonreciprocal hopping and complex quasiperiodic potentials,and the Ganeshan-Pixley-Das Sarma model with nonreciprocal hopping.We successfully obtain the mobility edges and Lyapunov exponents in their mosaic models.This general mapping may catalyze further studies on mobility edges,Lyapunov exponents,and other significant quantities pertaining to localization in non-Hermitian mosaic models.

Performance assessment of two-dimensional hydraulic models for generation of flood inundation maps in mountain river basins

Hydraulic models for the generation of flood inundation maps are not commonly applied in mountain river basins because of the difficulty in modeling the hydraulic behavior and the complex topography. This paper presents a comparative analysis of the performance of four twodimensional hydraulic models (HEC-RAS 2D, Iber 2D, Flood Modeller 2D, and PCSWMM 2D) with respect to the generation of flood inundation maps. The study area covers a 5-km reach of the Santa B-arbara River located in the Ecuadorian Andes, at 2330 masl, in Gualaceo. The model's performance was evaluated based on the water surface elevation and flood extent, in terms of the mean absolute difference and measure of fit. The analysis revealed that, for a given case, Iber 2D has the best performance in simulating the water level and inundation for flood events with 20- and 50-year return periods, respectively, followed by Flood Modeller 2D, HEC-RAS 2D, and PCSWMM 2D in terms of their performance. Grid resolution, the way in which hydraulic structures are mimicked, the model code, and the default value of the parameters are considered the main sources of prediction uncertainty.

Ontology mapping based on hidden Markov model

The existing ontology mapping methods mainly consider the structure of the ontology and the mapping precision is lower to some extent. According to statistical theory, a method which is based on the hidden Markov model is presented to establish ontology mapping. This method considers concepts as models, and attributes, relations, hierarchies, siblings and rules of the concepts as the states of the HMM, respectively. The models corresponding to the concepts are built by virtue of learning many training instances. On the basis of the best state sequence that is decided by the Viterbi algorithm and corresponding to the instance, mapping between the concepts can be established by maximum likelihood estimation. Experimental results show that this method can improve the precision of heterogeneous ontology mapping effectively.

Modelling and mapping soil erosion potential in China

Soil erosion is an important environmental threat in China.However,quantitative estimates of soil erosion in China have rarely been reported in the literature.In this study,soil loss potential in China was estimated by integrating satellite images,field samples,and ground observations based on the Revised Universal Soil Loss Equation(RUSLE).The rainfall erosivity factor was estimated from merged rainfall data using Collocated CoKriging(ColCOK)and downscaled by geographically weighted regression(GWR).The Random Forest(RF)regression approach was used as a tool for understanding and predicting the relationship between the soil erodibility factor and a set of environment factors.Our results show that the average erosion rate in China is 1.44 t ha^(–1) yr^(–1).More than 60%of the territory in China is influenced by soil erosion limitedly,with an average potential erosion rate less than 0.1 t ha^(–1) yr^(–1).Other unused land and other forested woodlands showed the highest erosion risk.Our estimates are comparable to those of runoff plot studies.Our results provide a useful tool for soil loss assessments and ecological environment protections.

Mapping landslide susceptibility at the Three Gorges Reservoir, China, using gradient boosting decision tree,random forest and information value models

This work was to generate landslide susceptibility maps for the Three Gorges Reservoir(TGR) area, China by using different machine learning models. Three advanced machine learning methods, namely, gradient boosting decision tree(GBDT), random forest(RF) and information value(InV) models, were used, and the performances were assessed and compared. In total, 202 landslides were mapped by using a series of field surveys, aerial photographs, and reviews of historical and bibliographical data. Nine causative factors were then considered in landslide susceptibility map generation by using the GBDT, RF and InV models. All of the maps of the causative factors were resampled to a resolution of 28.5 m. Of the 486289 pixels in the area,28526 pixels were landslide pixels, and 457763 pixels were non-landslide pixels. Finally, landslide susceptibility maps were generated by using the three machine learning models, and their performances were assessed through receiver operating characteristic(ROC) curves, the sensitivity, specificity,overall accuracy(OA), and kappa coefficient(KAPPA). The results showed that the GBDT, RF and In V models in overall produced reasonable accurate landslide susceptibility maps. Among these three methods, the GBDT method outperforms the other two machine learning methods, which can provide strong technical support for producing landslide susceptibility maps in TGR.

The homotopic mapping method for sea-air oscillator model of interdecadal climate fluctuations

The E1 Nifio/La Nifia Southern Oscillation （ENSO） is an interannual phenomenon involved in the tropical Pacific ocean-atmosphere interactions. In this paper, a coupled system of sea-air oscillator model is studied. The aim is to create an asymptotic solving method of nonlinear equation for the ENSO model. And based on a class of oscillators of ENSO model, employing the method of homotopic mapping, the approximate solution of corresponding problem is studied. It is proven from the results that the homotopic method can be used for analysing the sea surface temperature anomaly in the equatorial eastern Pacific and the thermocline depth anomaly of the atmosphere-ocean oscillation for ENSO model.

Development and application of a two-dimensional water quality model for the Daqinghe River Mouth of the Dianchi Lake

Water quality models are important tools to support the optimization of aquatic ecosystem rehabilitation programs and assess their efficiency. Basing on the flow conditions of the Daqinghe River Mouth of the Dianchi Lake, China, a two-dimensional water quality model was developed in the research. The hydrodynamics module was numerically solved by the alternating direction iteration （ADI） method. The parameters of the water quality module were obtained through the in situ experiments and the laboratory analyses that were conducted from 2006 to 2007. The model was calibrated and verified by the observation data in 2007. Among the four modelled key variables, i.e., water level, COD （in CODcr）, NH4＋-N and PO43-P the minimum value of the coefficient of determination （COD） was 0.69, indicating the model performed reasonably well. The developed model was then applied to simulate the water quality changes at a downstream cross-section assuming that the designed restoration programs were implemented. According to the simulated results, the restoration programs could cut down the loads of COD and PO43-P about 15%. Such a load reduction, unfortunately, would have very little effect on the NH4^＋-N removal. Moreover, the water quality at the outlet cross-section would be still in class V （3838-02）, indicating more measures should be taken to further reduce the loads. The study demonstrated the capability of water quality models to support aquatic ecosystem restorations.

Simulation of two-dimensional interior ballistics model of solid propellant electrothermal-chem ical launch with discharge rod plasma generator

Instead of the capillary plasma generator(CPG),a discharge rod plasma generator(DRPG)is used in the30 mm electrothermal-chemical(ETC)gun to improve the ignition uniformity of the solid propellant.An axisymmetric two-dimensional interior ballistics model of the solid propellant ETC gun(2D-IB-SPETCG)is presented to describe the process of the ETC launch.Both calculated pressure and projectile muzzle velocity accord well with the experimental results.The feasibility of the 2D-IB-SPETCG model is proved.Depending on the experimental data and initial parameters,detailed distribution of the ballistics parameters can be simulated.With the distribution of pressure and temperature of the gas phase and the propellant,the influence of plasma during the ignition process can be analyzed.Because of the radial flowing plasma,the propellant in the area of the DRPG is ignited within 0.01 ms,while all propellant in the chamber is ignited within 0.09 ms.The radial ignition delay time is much less than the axial delay time.During the ignition process,the radial pressure difference is less than 5 MPa at the place 0.025 m away from the breech.The radial ignition uniformity is proved.The temperature of the gas increases from several thousand K(conventional ignition)to several ten thousand K(plasma ignition).Compare the distribution of the density and temperature of the gas,we know that low density and high temperature gas appears near the exits of the DRPG,while high density and low temperature gas appears at the wall near the breech.The simulation of the 2D-IB-SPETCG model is an effective way to investigate the interior ballistics process of the ETC launch.The 2D-IB-SPETC model can be used for prediction and improvement of experiments.

XML-based integration data model and schema mappingin multidatabase systems

Multidatabase systems are designed to achieve schema integration and data interoperation among distributed and heterogeneous database systems. But data model heterogeneity and schema heterogeneity make this a challenging task. A multidatabase common data model is firstly introduced based on XML, named XML-based Integration Data Model (XIDM), which is suitable for integrating different types of schemas. Then an approach of schema mappings based on XIDM in multidatabase systems has been presented. The mappings include global mappings, dealing with horizontal and vertical partitioning between global schemas and export schemas, and local mappings, processing the transformation between export schemas and local schemas. Finally, the illustration and implementation of schema mappings in a multidatabase prototype - Panorama system are also discussed. The implementation results demonstrate that the XIDM is an efficient model for managing multiple heterogeneous data sources and the approaches of schema mapping based on XIDM behave very well when integrating relational, object-oriented database systems and other file systems.

Landslide susceptibility mapping using Genetic Algorithm for the Rule Set Production(GARP) model

Investigation on landslide phenomenon is necessary for understanding and delineating the landslide prone and safer places for different land use practices. On this basis, a new model known as genetic algorithm for the rule set production was applied in order to assess its efficacy to obtain a better result and a more precise landslide susceptibility map in Klijanerestagh area of Iran. This study considered twelve landslide conditioning factors(LCF) like altitude, slope, aspect, plan curvature, profile curvature, topographic wetness index(TWI), distance from rivers, faults, and roads, land use/cover, and lithology. For modeling purpose, the Genetic Algorithm for the Rule Set Production(GARP) algorithm was applied in order to produce the landslide susceptibility map. Finally, to evaluate the efficacy of the GARP model, receiver operating characteristics curve as well as the Kappa index were employed. Based on these indices, the GARP model predicted the probability of future landslide incidences with the area under the receiver operating characteristics curve(AUC-ROC) values of 0.932, and 0.907 for training and validating datasets, respectively. In addition, Kappa values for the training and validating datasets were computed as 0.775, and 0.716, respectively. Thus, it can be concluded that the GARP algorithm can be a new but effective method for generating landslide susceptibility maps(LSMs). Furthermore, higher contribution of the lithology, distance from roads, and distance from faults was observed, while lower contribution was attributed to soil, profile curvature, and TWI factors. The introduced methodology in this paper can be suggested for other areas with similar topographical and hydrogeological characteristics for land use planning and reducing the landslide damages.

Implementation Framework and Validation of Cluster-Nuclei Based Channel Model Using Environmental Mapping for 6G Communication Systems

With the research of the upcoming sixth generation(6 G) systems, new technologies will require wider bandwidth, larger scale antenna arrays and more diverse wireless communication scenarios on the future channel modeling. Considering channel model is prerequisite for system design and performance evaluation of 6 G technologies, we face a challenging task: how to accurately and efficiently model 6 G channel for various scenarios? This paper tries to answer it. Firstly, the features of cluster-nuclei(CN) and principle of cluster-nuclei based channel model(CNCM) are introduced. Then, a novel modeling framework is proposed to implement CNCM,which consists four steps: propagation environment reconstruction, cluster-nuclei identification, multipath parameters generation, and channel coefficients generation. Three-dimensional environment with material information is utilized to map CN with scatterers in the propagation pathway. CN are identified by geometrical and electric field calculation based on environmental mapping, and multipath components within CN are calculated by statistical characteristics of angle, power and delay domains. Finally, we present a three-level verification structure to investigate the accuracy and complexity of channel modeling comprehensively. Simulation results reveal that CNCM can perform higher accuracy than geometrybased stochastic model while lower complexity compared with ray-tracing model for practical propagation environment.

Manganese potential mapping in western Guangxi-southeastern Yunnan(China) via spatial analysis and modal-adaptive prospectivity modeling

While the region of western Guangxi-southeastern Yunan, China, is known and considered prospective for manganese deposits, carrying out prospectivity mapping in this region is challenging due to the diversity of geological factors, the complexity of geological process and the asymmetry of geo-information. In this work, the manganese potential mapping for further exploration targeting is implemented via spatial analysis and modal-adaptive prospectivity modeling. On the basis of targeting criteria developed by the mineral system approach, the spatial analysis is leveraged to extract the predictor variables to identify features of the geological process. Specifically, a metallogenic field analysis approach is proposed to extract metallogenic information that quantifies the regional impacts of the synsedimentary faults and sedimentary basins. In the integration of the extracted predictor variables, a modal-adaptive prospectivity model is built, which allows to adapt different data availability and geological process. The resulting prospective areas of high potential not only correspond to the areas of known manganese deposits but also provide a number of favorable targets in the region for future mineral exploration.

GIS and ANN model for landslide susceptibility mapping

Landslide hazard is as the probability of occurrence of a potentially damaging landslide phenomenon within specified period of time and within a given area. The susceptibility map provides the relative spatial probability of landslides occurrence. A study is presented of the application of GIS and artificial neural network model to landslide susceptibility mapping, with particular reference to landslides on natural terrain in this paper. The method has been applied to Lantau Island, the largest outlying island within the territory of Hong Kong. A three-level neural network model was constructed and trained by the back-propagate algorithm in the geographical database of the study area. The data in the database includes digital elevation modal and its derivatives, landslides distribution and their attributes, superficial geological maps, vegetation cover, the raingauges distribution and their 14 years 5-minute observation. Based on field inspection and analysis of correlation between terrain variables and landslides frequency, lithology, vegetation cover, slope gradient, slope aspect, slope curvature, elevation, the characteristic value, the rainstorms corresponding to the landslide, and distance to drainage Une are considered to be related to landslide susceptibility in this study. The artificial neural network is then coupled with the ArcView3.2 GIS software to produce the landslide susceptibility map, which classifies the susceptibility into three levels: low, moderate, and high. The results from this study indicate that GIS coupled with artificial neural network model is a flexible and powerful approach to identify the spatial probability of hazards.

Mapping the potential distribution suitability of 16 tree species under climate change in northeastern China using Maxent modelling

Knowledge on the potential suitability of tree species to the site is very important for forest management planning.Natural forest distribution provides a good reference for afforestation and forest restoration.In this study,we developed species distribution model(SDM)for 16 major tree species with 2,825 permanent sample plots with natural origin from Chinese National Forest Inventory data collected in Jilin Province using the Maxent model.Three types of environmental factors including bioclimate,soil and topography with a total of 33 variables were tested as the input.The values of area under the curve(AUC,one of the receiver operating characteristics of the Maxent model)in the training and test datasets were between 0.784 and 0.968,indicating that the prediction results were quite reliable.The environmental factors affecting the distribution of species were ranked in terms of their importance to the species distribution.Generally,the climatic factors had the greatest contribution,which included mean diurnal range,annual mean temperature,temperature annual range,and iosthermality.But the main environmental factors varied with tree species.Distribution suitability maps under current(1950-2000)and future climate scenarios(CCSM4-RCP 2.6 and RCP 6.0 during 2050)were produced for 16 major tree species in Jilin Province using the model developed.The predicted current and future ranges of habitat suitability of the 16 tree species are likely to be positively and negatively affected by future climate.Seven tree species were found to benefit from future climate including B etula costata,Fraxinus mandshurica,Juglans mandshurica,Phellodendron amurense,Populus ussuriensis,Quercus mongolica and Ulmus pumila;five tree species will experience decline in their suitable habitat including B.platyphylla,Tilia mongolica,Picea asperata,Pinus sylvestris,Pinus koraiensis;and four(Salix koreensis,Abies fabri,Pinus densiflora and Larix olgensis)showed the inconsistency under RCP 2.6 and RCP 6.0 scenarios.The maps of the habitat suitability can be used as a basis for afforestation and forest restoration in northeastern China.The SDMs could be a potential tool for forest management planning.

HIGH RESOLUTION PARAMETRIC MODELLING FOR TWO-DIMENSIONAL RADAR TARGET USING PRONY ALGORITHM

On the conditions of low-resolution radar, a parametric model for two-dimensional radar target is described here according to the theory of electromagnetic scattering and the geometrical theory of diffraction. A high resolution estimation algorithm to extract the model parameters is also developed by building the relation of the scattering model and Prony model. The analysis of Cramer-Rao bound and simulation show that the method here has better statistical performance. The simulated analysis also indicates that the accurate extraction of the diffraction coefficient of scattering center is restricted by signal to noise ratio, radar center frequency and radar bandwidth.

MODELING METHOD FOR PRODUCT STRUCTURE MAPPING BASED ON REVERSE SOLVING OF LOCUS AND MOTION

Aiming at the problem of structure design in reverse-design of mechanism, a structure mapping method based on reverse solving of locus and motion （RSLM） is presented. The mechanism scheme meeting the requirements of geometric and structural features is obtained through RSLM. The element instance subsets related to component are established based on the element type mapping, pair structure type mapping and design knowledge mapping between components and elements layer by layer. The assembly position mapping of elements is established based on the topological structure information of mechanism scheme, and the product modeling of structure mapping is realized. The algorithm program and prototype system of product structure mapping based on RSLM are developed. Application samples show that the method implements the integration of scheme design, assembly design and structure design, and modeling for product structure mapping based on RSLM. The feasibility of assembly is analyzed in scheme design that contributes to reducing the design error, and raising the design efficiency and quality.