Risk factors and risk prediction model for mucocutaneous separation in enterostomy patients:A single center experience

BACKGROUND Mucocutaneous separation(MCS)is a common postoperative complication in enterostomy patients,potentially leading to significant morbidity.Early identification of risk factors is crucial for preventing this condition.However,predictive models for MCS remain underdeveloped.AIM To construct a risk prediction model for MCS in enterostomy patients and assess its clinical predictive accuracy.METHODS A total of 492 patients who underwent enterostomy from January 2019 to March 2023 were included in the study.Patients were divided into two groups,the MCS group(n=110),and the non-MCS(n=382)based on the occurrence of MCS within the first 3 weeks after surgery.Univariate and multivariate analyses were used to identify the independent predictive factors of MCS and the model constructed.Receiver operating characteristic curve analysis was used to assess the model’s performance.RESULTS The postoperative MCS incidence rate was 22.4%.Suture dislodgement(P<0.0001),serum albumin level(P<0.0001),body mass index(BMI)(P=0.0006),hemoglobin level(P=0.0409),intestinal rapture(P=0.0043),incision infection(P<0.0001),neoadjuvant therapy(P=0.0432),stoma site(P=0.0028)and elevated intra-abdominal pressure(P=0.0395)were potential predictive factors of MCS.Suture dislodgement[P<0.0001,OR:28.007595%CI:(11.0901-82.1751)],serum albumin level(P=0.0008,OR:0.3504,95%CI:[0.1902-0.6485]),BMI[P=0.0045,OR:2.1361,95%CI:(1.2660-3.6235)],hemoglobin level[P=0.0269,OR:0.5164,95%CI:(0.2881-0.9324)],intestinal rapture[P=0.0351,OR:3.0694,95%CI:(1.0482-8.5558)],incision infection[P=0.0179,OR:0.2885,95%CI:(0.0950-0.7624)]and neoadjuvant therapy[P=0.0112,OR:1.9769,95%CI:(1.1718-3.3690)]were independent predictive factors and included in the model.The model had an area under the curve of 0.827 and good clinical utility on decision curve analysis.CONCLUSION The mucocutaneous separation prediction model constructed in this study has good predictive performance and can provide a reference for early warning of mucocutaneous separation in enterostomy patients.

Virtually coupled train set control subject to space-time separation:A distributed economic MPC approach with emergency braking configuration

The emerging virtual coupling technology aims to operate multiple train units in a Virtually Coupled Train Set(VCTS)at a minimal but safe distance.To guarantee collision avoidance,the safety distance should be calculated using the state-of-the-art space-time separation principle that separates the Emergency Braking(EB)trajectories of two successive units during the whole EB process.In this case,the minimal safety distance is usually numerically calculated without an analytic formulation.Thus,the constrained VCTS control problem is hard to address with space-time separation,which is still a gap in the existing literature.To solve this problem,we propose a Distributed Economic Model Predictive Control(DEMPC)approach with computation efficiency and theoretical guarantee.Specifically,to alleviate the computation burden,we transform implicit safety constraints into explicitly linear ones,such that the optimal control problem in DEMPC is a quadratic programming problem that can be solved efficiently.For theoretical analysis,sufficient conditions are derived to guarantee the recursive feasibility and stability of DEMPC,employing compatibility constraints,tube techniques and terminal ingredient tuning.Moreover,we extend our approach with globally optimal and distributed online EB configuration methods to shorten the minimal distance among VCTS.Finally,experimental results demonstrate the performance and advantages of the proposed approaches.

Numerical modeling of destress blasting for strata separation

Destress blasting(DB)implemented along the perimeter of safety pillars is a special application of destressing in coal longwall mining.The goal is to separate relatively more deformed mined areas from safety pillars,such as shaft pillars or cross-cut pillars,to reduce the transfer of high stresses to the protective pillar.This case study aims to numerically simulate selected destress blasts in the Czech part of the Upper Silesian Coal Basin and examine its impact on stress transfer to the safety pillar area.To separate the area between the protective pillar and the longwall(LW),two fans of five 93-mm blast holes(length of 93e100 m)were drilled from the gate roads into the overburden strata.Each set of blast holes was fired separately in two stages without time delay.The explosive charge(gelatin-type of explosive)of each stage is 3450 kg.The two DB stages were fired when the longwall face was approximately 158 m and 152 m away from the blast.A 3D mine-wide model is built and validated with in situ stress measured with hydrofracturing.Mining and destressing in three 5-m thick coal seams are simulated in the region.Numerical modeling of DB is successfully conducted using a rock fragmentation factor a of 0.05 and a stress reduction/dissipation factor β of 0.95.Buffering of transfer of additional stress from the mining area into the safety pillar is evaluated by comparison of yielding volume before and after DB.It is shown that yielding volume drops after DB by nearly 80%in the area of the destressing panel and near the safety shaft pillar.

Two-dimensional material separation membranes for renewable energy purification, storage, and conversion

The current energy crisis has prompted the development of new energy sources and energy storage/conversion devices. Membranes, as the key component, not only provide enormous separation potential for energy purification but also guarantee stable and high-efficiency operation for rechargeable batteries and fuel cells. Remarkably, two-dimensional(2D) material separation membranes have attracted intense attention on their excellent performance in energy field applications, owing to high mechanical/chemical stability, low mass transport resistance, strict sizeexclusion, and abundant modifiable functional groups. In this review, we concentrate on the recent progress of 2D membrane and introduce 2D membranes based on graphene oxide(GO), MXenes, 2D MOFs, 2D COFs, and 2D zeolite nanosheets, which are applied in membrane separation(H2 collection and biofuel purification) and battery separators(vanadium flow battery, Li–S battery, and fuel cell). The mass transport mechanism, selectivity mechanism, and modification methods of these 2D membranes are stated in brief, mainly focusing on interlayer dominant membranes(GO and MXenes) and pore dominant membranes(MOFs, COFs, and zeolite nanosheets). In conclusion, we highlight the challenges and outlooks of applying 2D membranes in energy fields.

A Lagrangian criterion of unsteady flow separation for two-dimensional periodic flows

The present paper proposes a Lagrangian criterion of unsteady flow separation for two-dimensional periodic flows based on the principle of weighted averaging zero skin-friction given by Haller （HALLER, G. Exact theory of unsteady separation for two-dimensional flows. Journal of Fluid Mechanics, 512, 257-311 （2004））. By analyzing the distribution of the finite-time Lyapunov exponent （FTLE） along the no-slip wall, it can be found that the periodic separation takes place at the point of the zero FTLE. This new criterion is verified with an analytical solution of the separation bubble and a numerical simulation of lid-driven cavity flows.

Two-dimensional graphitic carbon nitride for membrane separation

Recent years,membrane separation technology has attracted significant research attention because of the efficient and environmentally friendly operation.The selection of suitable materials to improve the membrane selectivity,permeability and other properties has become a topic of vital research relevance.Two-dimensional(2D)materials,a novel family of multifunctional materials,are widely used in membrane separation due to their unique structure and properties.In this respect,as a novel 2D material,graphitic carbon nitride(g-C_(3)N_(4))have found specific attention in membrane separation.This study reviews the application of carbon nitride in gas separation membranes,pervaporation membranes,nanofiltration membranes,reverse osmosis membranes,ion exchange membranes and catalytic membranes,along with describing the separation mechanisms.

USING TWO-DIMENSIONAL TIME RESOLVED LIGHT SCATTERING TO STUDY THE CURE REACTION INDUCED PHASE SEPARATION PROCESS OF EPOXY-AMINE-POLYETHERSULFONE BLEND WITH SECONDARY PHASE SEPARATION

The generalized two-dimensional correlation analysis based on time-resolved light scattering patterns （2D TRLS） has been employed to study the phase separation process of an epoxy-amine-polyethersulfone blend in which the secondary phase separation takes place. The results of the 2D TRLS provided more detailed information that was not readily observed in the 1D TRLS patterns. （i） During the first process of phase separation, the sequential order of coarsening in size of the domains among the larger and smaller ones has been reversed between the diffusion regime and the hydrodynamic regime. （ii） The change of the larger domains in size, due to the hydrodynamic flow in the late stage of the first phase separation process, keeps on taking place earlier than that of the new domains appeared in the secondary phase separation process. （iii） During the secondary phase separation process the size growth of the smaller domains takes place earlier than that of the larger ones, probably due to the assumption that the coarsening mode could decrease the interface tension more quickly.

Loose-stratification model in separation process for vanadium pre-concentration from stone coal

A technology of one-stage roughing and one-stage scavenging vanadium pre-concentration with shaking table was investigated for improving vanadium grade and decreasing acid consumption minerals content based on the quantitative evaluation of minerals by scanning electronic microscopy （QEMSCAN）. In order to visually illustrate how the vanadium-bearing minerals were separated from system, a loose-stratification model was established with Bagnold shear loose theory and Kelly stratification hypothesis. Through the model, it was inferred that fine fraction and coarse fraction of vanadium-bearing muscovite particles easily became the concentrate in roughing and scavenging stages, respectively. The type of the dominant effect on the loose-stratification was confirmed. In the roughing stage, gravity sedimentation played a leading role in the loose-stratification process. However, in the scavenging stage, shearing dispersion pressure caused by asymmetric motion of table deck took an important part in the loose-stratification process. Finally, the correction of the loose-stratification model was validated by the practical experiment.

Particulate flow modelling in a spiral separator by using the Eulerian multi-fluid VOF approach

The Euler-Euler model is less effective in capturing the free surface of flow film in the spiral separator,and thus a Eulerian multi-fluid volume of fluid(VOF)model was first proposed to describe the particulate flow in spiral separators.In order to improve the applicability of the model in the high solid concentration system,the Bagnold effect was incorporated into the modelling framework.The capability of the proposed model in terms of predicting the flow film shape in a LD9 spiral separator was evaluated via comparison with measured flow film thicknesses reported in literature.Results showed that sharp air–water and air-pulp interfaces can be obtained using the proposed model,and the shapes of the predicted flow films before and after particle addition were reasonably consistent with the observations reported in literature.Furthermore,the experimental and numerical simulation of the separation of quartz and hematite were performed in a laboratory-scale spiral separator.When the Bagnold lift force model was considered,predictions of the grade of iron and solid concentration by mass for different trough lengths were more consistent with experimental data.In the initial development stage,the quartz particles at the bottom of the flow layer were more possible to be lifted due to the Bagnold force.Thus,a better predicted vertical stratification between quartz and hematite particles was obtained,which provided favorable conditions for subsequent radial segregation.

A velocity-difference-separation model for car-following theory

We introduce a velocity-difference-separation model that modifies the previous models in the literature. The improvement of this new model over the previous ones lies in that it not only theoretically retains many strong points of the previous ones, but also performs more realistically than others in the dynamical evolution of congestion. Furthermore, the proposed model is investigated with analytic and numerical methods, with the finding that it can demonstrate some complex physical features observed in real traffic such as the existence of three phases： free flow, synchronized flow, and wide moving jam; sudden flow drop in flow-density plane; and traffic hysteresis in transition between the free and the synchronized flow.

Development and application of a two-dimensional water quality model for the Daqinghe River Mouth of the Dianchi Lake

Water quality models are important tools to support the optimization of aquatic ecosystem rehabilitation programs and assess their efficiency. Basing on the flow conditions of the Daqinghe River Mouth of the Dianchi Lake, China, a two-dimensional water quality model was developed in the research. The hydrodynamics module was numerically solved by the alternating direction iteration （ADI） method. The parameters of the water quality module were obtained through the in situ experiments and the laboratory analyses that were conducted from 2006 to 2007. The model was calibrated and verified by the observation data in 2007. Among the four modelled key variables, i.e., water level, COD （in CODcr）, NH4＋-N and PO43-P the minimum value of the coefficient of determination （COD） was 0.69, indicating the model performed reasonably well. The developed model was then applied to simulate the water quality changes at a downstream cross-section assuming that the designed restoration programs were implemented. According to the simulated results, the restoration programs could cut down the loads of COD and PO43-P about 15%. Such a load reduction, unfortunately, would have very little effect on the NH4^＋-N removal. Moreover, the water quality at the outlet cross-section would be still in class V （3838-02）, indicating more measures should be taken to further reduce the loads. The study demonstrated the capability of water quality models to support aquatic ecosystem restorations.

Simulation of two-dimensional interior ballistics model of solid propellant electrothermal-chem ical launch with discharge rod plasma generator

Instead of the capillary plasma generator(CPG),a discharge rod plasma generator(DRPG)is used in the30 mm electrothermal-chemical(ETC)gun to improve the ignition uniformity of the solid propellant.An axisymmetric two-dimensional interior ballistics model of the solid propellant ETC gun(2D-IB-SPETCG)is presented to describe the process of the ETC launch.Both calculated pressure and projectile muzzle velocity accord well with the experimental results.The feasibility of the 2D-IB-SPETCG model is proved.Depending on the experimental data and initial parameters,detailed distribution of the ballistics parameters can be simulated.With the distribution of pressure and temperature of the gas phase and the propellant,the influence of plasma during the ignition process can be analyzed.Because of the radial flowing plasma,the propellant in the area of the DRPG is ignited within 0.01 ms,while all propellant in the chamber is ignited within 0.09 ms.The radial ignition delay time is much less than the axial delay time.During the ignition process,the radial pressure difference is less than 5 MPa at the place 0.025 m away from the breech.The radial ignition uniformity is proved.The temperature of the gas increases from several thousand K(conventional ignition)to several ten thousand K(plasma ignition).Compare the distribution of the density and temperature of the gas,we know that low density and high temperature gas appears near the exits of the DRPG,while high density and low temperature gas appears at the wall near the breech.The simulation of the 2D-IB-SPETCG model is an effective way to investigate the interior ballistics process of the ETC launch.The 2D-IB-SPETC model can be used for prediction and improvement of experiments.

A Variable Separation Approach to Solve the Integrable and Nonintegrable Models:Coherent Structures of the (2 + 1)-Dimensional KdV Eqnation

We study the localized coherent structures ofa generally nonintegrable (2+ 1 )-dimensional KdV equation via a variable separation approach. In a special integrable case, the entrance of some arbitrary functions leads to abundant coherent structures. However, in the general nonintegrable case, an additional condition has to be introduced for these arbitrary functions. Although the additional condition has been introduced into the solutions of the nonintegrable KdV equation, there still exist many interesting solitary wave structures. Especially, the nonintegrable KdV equation possesses the breather-like localized excitations, and the similar static ring soliton solutions as in the integrable case. Furthermor,in the integrable case, the interaction between two travelling ring solitons is elastic, while in the nonintegrable case we cannot find even the single travelling ring soliton solution.

Performance assessment of two-dimensional hydraulic models for generation of flood inundation maps in mountain river basins

Hydraulic models for the generation of flood inundation maps are not commonly applied in mountain river basins because of the difficulty in modeling the hydraulic behavior and the complex topography. This paper presents a comparative analysis of the performance of four twodimensional hydraulic models (HEC-RAS 2D, Iber 2D, Flood Modeller 2D, and PCSWMM 2D) with respect to the generation of flood inundation maps. The study area covers a 5-km reach of the Santa B-arbara River located in the Ecuadorian Andes, at 2330 masl, in Gualaceo. The model's performance was evaluated based on the water surface elevation and flood extent, in terms of the mean absolute difference and measure of fit. The analysis revealed that, for a given case, Iber 2D has the best performance in simulating the water level and inundation for flood events with 20- and 50-year return periods, respectively, followed by Flood Modeller 2D, HEC-RAS 2D, and PCSWMM 2D in terms of their performance. Grid resolution, the way in which hydraulic structures are mimicked, the model code, and the default value of the parameters are considered the main sources of prediction uncertainty.

Development of separation sharpness model for hydrocyclone

Hydrocyclones are mechanical devices used in classifying and separating many different types of materials.A classification function of the hydrocyclone has been continually developed for solid–liquid separation.In the classification process of solids from liquids,it is desirable to reduce the amount of misplaced material;therefore,the separation sharpness,α(alpha),is a parameter that helps in evaluating misplaced material and has been developed as a model to help the designer predict the performance of the classification.However,the problem with the separation sharpness model is that it cannot be used outside the range of conditions under which it was developed.Therefore,this research aimed to develop the separation sharpness model to predict more accurately and cover a wide range of conditions using the multiple linear regression method.The new regression model of separation sharpness was based on a wide range of both experimental and industrial data-sets of 431 tests collaborating with the additional experiments of 117 tests that were obtained from a total of 548 tests.The new model of separation sharpness can be used in the range of 30–762 mm hydrocyclone body diameters and feed solid concentrations in the range of 0.5 wt%–80 wt%.When compared with the experimental separation sharpness,the accuracy of the separation sharpness model prediction has an error of 4.53%and^of 0.973.

Testing the robustness of particle-based separation models for the magnetic separation of a complex skarn ore

Physical separation processes are best understood in terms of the behaviour of individual ore particles.Yet,while different empirical particle-based separation modelling approaches have been developed,their predictive performance has never been tested under variable process conditions.Here,we investigated the predictive performance of a state-of-the-art particle-based separation model under variable feed composition for a laboratory-scale magnetic separation of a skarn ore.Two scenarios were investigated:one in which the mass flow of the different processing streams could be measured and one in which it had to be estimated from data.In both scenarios,the predictive models were sufficiently general to predict the process outcomes of new samples of variable composition.Nevertheless,the scenario in which mass flow could be measured was4%more precise in predicting mass balances.The process behaviour of minerals present at concentrations above 0.1%by weight could be accurately predicted.Our findings indicate the potential use of this method to minimize the costs of metallurgical testwork while providing in-depth understanding of the recovery behaviour of individual ore particles.Moreover,the method may be used to establish powerful tools to forecast mineral recoveries for partly new ore types at a running mining operation.

Optimization of CO_2 separation technologies for Chinese refineries based on a fuzzy comprehensive evaluation model

This study aims at determining the optimal CO2 separation technology for Chinese refineries, based on current available technologies, by the method of comprehensive evaluation. Firstly, according to the characteristics of flue gas from Chinese refineries, three feasible CO2 separation technologies are selected. These are pressure swing adsorption （PSA）, chemical absorption （CA）, and membrane absorption （MA）. Secondly, an economic assessment of these three techniques is carried out in accordance with cash flow analysis. The results show that these three techniques all have economic feasibility and the PSA technique is the best. Finally, to further optimize the three techniques, a two-level fuzzy comprehensive evaluation model is established, including economic, technological, and environmental factors. Considering all the factors, PSA is optimal for Chinese refineries, followed by CA and MA. Therefore, to reduce Chinese refineries carbon emission, it is suggested that CO2 should be captured from off-gases using PSA.

Numerical Simulation for Two-Phase Water Hammer Flows in Pipe by Quasi-Two-Dimensional Model

The features of a quasi-two-dimensional( quasi-2D) model for simulating two-phase water hammer flows with vaporous cavity in a pipe are investigated. The quasi-2D model with discrete vaporous cavity in the pipe is proposed in this paper. This model uses the quasi-2D model for pure liquid zone and one-dimensional( 1D) discrete vapor cavity model for vaporous cavity zone. The quasi-2D model solves two-dimensional equations for both axial and radial velocities and 1D equations for both pressure head and discharge by the method of characteristics. The 1D discrete vapor cavity model is used to simulate the vaporous cavity occurred when the pressure in the local pipe is lower than the vapor pressure of the liquid. The proposed model is used to simulate two-phase water flows caused by the rapid downstream valve closure in a reservoir-pipe-valve system.The results obtained by the proposed model are compared with those by the corresponding 1D model and the experimental ones provided by the literature,respectively. The comparison shows that the maximum pressure heads simulated by the proposed model are more accurate than those by the corresponding 1D model.

Blind source separation of ship-radiated noise based on generalized Gaussian model

When the distribution of the sources cannot be estimated accurately, the ICA algorithms failed to separate the mixtures blindly. The generalized Gaussian model （GGM） is presented in ICA algorithm since it can model non- Ganssian statistical structure of different source signals easily. By inferring only one parameter, a wide class of statistical distributions can be characterized. By using maximum likelihood （ML） approach and natural gradient descent, the learning rules of blind source separation （BSS） based on GGM are presented. The experiment of the ship-radiated noise demonstrates that the GGM can model the distributions of the ship-radiated noise and sea noise efficiently, and the learning rules based on GGM gives more successful separation results after comparing it with several conventional methods such as high order cumnlants and Gaussian mixture density function.

HIGH RESOLUTION PARAMETRIC MODELLING FOR TWO-DIMENSIONAL RADAR TARGET USING PRONY ALGORITHM

On the conditions of low-resolution radar, a parametric model for two-dimensional radar target is described here according to the theory of electromagnetic scattering and the geometrical theory of diffraction. A high resolution estimation algorithm to extract the model parameters is also developed by building the relation of the scattering model and Prony model. The analysis of Cramer-Rao bound and simulation show that the method here has better statistical performance. The simulated analysis also indicates that the accurate extraction of the diffraction coefficient of scattering center is restricted by signal to noise ratio, radar center frequency and radar bandwidth.