Self-diffraction appears when the strong laser goes through two-dimensional material suspension,and this spatial self-phase modulation(SPPM)phenomenon can be used to measure nonlinear optical parameters and achieve op...Self-diffraction appears when the strong laser goes through two-dimensional material suspension,and this spatial self-phase modulation(SPPM)phenomenon can be used to measure nonlinear optical parameters and achieve optical switch.At present,the mechanism of SPPM is still ambiguous.The debate mainly focuses on whether the phenomenon is caused by the nonlinear refractive index of the two-dimensional material or the thermal effect of the laser.The lack of theory limits the dimension of the phase modulation to the radius of the diffraction ring and the vertical imbalance.Therefore,it is urgent to establish a unified and universal SSPM theoretical system of two-dimensional material.展开更多
The filter made up of two gratings performs as a two-dimensional non-spatial filtering. This paper reports that the volume Bragg gratings are fabricated by interfering two collimated coherent laser beams in photopolym...The filter made up of two gratings performs as a two-dimensional non-spatial filtering. This paper reports that the volume Bragg gratings are fabricated by interfering two collimated coherent laser beams in photopolymer. Diffraction efficiency of a single grating is up to 78% in Bragg＇s condition, then a two-dimensional non-spatial filter, which consists of two volume Bragg gratings and a half-wave plate, enables the laser beam filtered in two dimensions with the diffraction efficiency of 54%. The Bragg＇s condition and effect of polarisation on performances of the two-dimension filter are also discussed.展开更多
AIM:To investigate the spatial distribution patterns of anorectal atresia/stenosis in China.METHODS:Data were collected from the Chinese Birth Defects Monitoring Network(CBDMN),a hospital-based congenital malformation...AIM:To investigate the spatial distribution patterns of anorectal atresia/stenosis in China.METHODS:Data were collected from the Chinese Birth Defects Monitoring Network(CBDMN),a hospital-based congenital malformations registry system.All fetuses more than 28 wk of gestation and neonates up to 7 d of age in hospitals within the monitoring sites of the CBDMN were monitored from 2001 to 2005.Two-dimensional graph-theoretical clustering was used to divide monitoring sites of the CBDMN into different clusters according to the average incidences of anorectal atresia/stenosis in the different monitoring sites.RESULTS:The overall average incidence of anorectal atresia/stenosis in China was 3.17 per 10000 from 2001 to 2005.The areas with the highest average incidences of anorectal atresia/stenosis were almost always focused in Eastern China.The monitoring sites were grouped into 6 clusters of areas.Cluster 1 comprised the monitoring sites in Heilongjiang Province,Jilin Province,and Liaoning Province;Cluster 2 was composed of those in Fujian Province,Guangdong Province,Hainan Province,Guangxi Zhuang Autonomous Region,south Hunan Province,and south Jiangxi Province;Cluster 3 consisted of those in Beijing Municipal City,Tianjin Municipal City,Hebei Province,Shandong Province,north Jiangsu Province,and north Anhui Province;Cluster 4 was made up of those in Zhejiang Province,Shanghai Municipal City,south Anhui Province,south Jiangsu Province,north Hunan Province,north Jiangxi Province,Hubei Province,Henan Province,Shanxi Province and Inner Mongolia Autonomous Region;Cluster 5 consisted of those in Ningxia Hui Autonomous Region,Gansu Province and Qinghai Province;and Cluster 6 included those in Shaanxi Province,Sichuan Province,Chongqing Municipal City,Yunnan Province,Guizhou Province,Xinjiang Uygur Autonomous Province and Tibet Autonomous Region.CONCLUSION:The fi ndings in this research allow the display of the spatial distribution patterns of anorectal atresia/stenosis in China.These will have important guiding significance for further analysis of relevant environmental factors regarding anorectal atresia/ stenosis and for achieving regional monitoring for anorectal atresia/stenosis.展开更多
In this work,we study the Cauchy problem of the spatially homogeneous Landau equation with hard potentials in a close-to-equilibrium framework.We prove that the solution to the Cauchy problem enjoys the analytic regul...In this work,we study the Cauchy problem of the spatially homogeneous Landau equation with hard potentials in a close-to-equilibrium framework.We prove that the solution to the Cauchy problem enjoys the analytic regularizing effect of the time variable with an L^(2)initial datum for positive time.So that the smoothing effect of the Cauchy problem for the spatially homogeneous Landau equation with hard potentials is exactly same as heat equation.展开更多
In order to expand the application of the basic magnesium carbonate in the field of flame retardant,the plate-like basic magnesium carbonate(Mg5(CO3)4(OH)2.4H2O)was prepared successfully by template-mediated/homogeneo...In order to expand the application of the basic magnesium carbonate in the field of flame retardant,the plate-like basic magnesium carbonate(Mg5(CO3)4(OH)2.4H2O)was prepared successfully by template-mediated/homogeneous precipitation method,using magnesium chloride hexahydrate(MgCl2.6H2O)and urea(CO(NH2)2)as reaction materials.Phase and morphology of the product were characterized by X-ray diffraction(XRD),scanning electron microscope(SEM)and atomic force microscope(AFM),respectively.The results showed that well-crystallized plate-like Mg5(CO3)4(OH)2.4H2O can be prepared at the water bath temperature of 100°C,water bath time of 24 h,the aging time of 5 h after adding organic template agent.The investigation on organic template mediated mechanism shows that the template affects the crystal morphology by changing surface energy of different crystal plane.Through a preliminary study on the growth mechanism of the product,it is found that the generation of the plate-like Mg5(CO3)4(OH)2.4H2O could be explained by two-dimensional nucleation/step growth mechanism.展开更多
An orthogonal 2D training image is constructed from the geological analysis results of well logs and sedimentary facies;the 2 D probabilities in three directions are obtained through linear pooling method and then agg...An orthogonal 2D training image is constructed from the geological analysis results of well logs and sedimentary facies;the 2 D probabilities in three directions are obtained through linear pooling method and then aggregated by the logarithmic linear pooling to determine the 3 D multi-point pattern probabilities at the unknown points,to realize the reconstruction of a 3 D model from 2D cross-section.To solve the problems of reducing pattern variability in the 2 D training image and increasing sampling uncertainty,an adaptive spatial sampling method is introduced,and an iterative simulation strategy is adopted,in which sample points from the region with higher reliability of the previous simulation results are extracted to be additional condition points in the following simulation to improve the pattern probability sampling stability.The comparison of lateral accretion layer conceptual models shows that the reconstructing algorithm using self-adaptive spatial sampling can improve the accuracy of pattern sampling and rationality of spatial structure characteristics,and accurately reflect the morphology and distribution pattern of the lateral accretion layer.Application of the method in reconstructing the meandering river reservoir of the Cretaceous McMurray Formation in Canada shows that the new method can accurately reproduce the shape,spatial distribution pattern and development features of complex lateral accretion layers in the meandering river reservoir under tide effect.The test by sparse wells shows that the simulation accuracy is above 85%,and the coincidence rate of interpretation and prediction results of newly drilled horizontal wells is up to 80%.展开更多
The stress and the strain should be defined as statistical variables averaged over the representative volume elements for any real continuum system.It is shown that their nonlinear spatial distributions undermine the ...The stress and the strain should be defined as statistical variables averaged over the representative volume elements for any real continuum system.It is shown that their nonlinear spatial distributions undermine the classical framework of solid mechanics and may cause non-ignorable errors to the solutions.With considering the high-order gradients of the stress and the strain,a two-step solution scheme is proposed to compensate for the influence.Through a revisit to three simple but typical problems,i.e.,the hole size-dependence of the fracture strength of perforated plates,the indentation depth-dependence of the measured elastic modulus by micro-indentation tests,and the tensile necking of metallic materials as well as hyperelastic materials,the effect of the nonlinear spatial distribution of stress and strain on solving these problems is illustrated.The observed size effect and the instability of deformation can be quantitatively explained if the effect is properly considered by the proposed method.展开更多
Various pattern evolutions are presented in one- and two-dimensional spatially coupled phase-conjugate systems （SCPCSs）. As the system parameters change, different patterns are obtained from the period-doubling of k...Various pattern evolutions are presented in one- and two-dimensional spatially coupled phase-conjugate systems （SCPCSs）. As the system parameters change, different patterns are obtained from the period-doubling of kink-antikinks in space to the spatiotemporal chaos in a one-dimensional SCPCS. The homogeneous symmetric states induce symmetry breaking from the four corners and the boundaries, finally leading to spatiotemporal chaos with the increase of the iteration time in a two-dimensional SCPCS. Numerical simulations are very helpful for understanding the complex optical phenomena.展开更多
Multiple quantum well spatial light modulators with 128×128 array in 38μm pitch are fabricated using two pproaches, one with an attachment of an optical substrate and another one without. These two fabrication p...Multiple quantum well spatial light modulators with 128×128 array in 38μm pitch are fabricated using two pproaches, one with an attachment of an optical substrate and another one without. These two fabrication processes are described and compared.展开更多
基金Project(6187031976)supported by the National Natural Science Foundation of China
文摘Self-diffraction appears when the strong laser goes through two-dimensional material suspension,and this spatial self-phase modulation(SPPM)phenomenon can be used to measure nonlinear optical parameters and achieve optical switch.At present,the mechanism of SPPM is still ambiguous.The debate mainly focuses on whether the phenomenon is caused by the nonlinear refractive index of the two-dimensional material or the thermal effect of the laser.The lack of theory limits the dimension of the phase modulation to the radius of the diffraction ring and the vertical imbalance.Therefore,it is urgent to establish a unified and universal SSPM theoretical system of two-dimensional material.
基金supported by the Joint Fund of the National Natural Science Foundation of China and the China Academy of Engineering Physics (NSAF) (Grant No. 10676038)
文摘The filter made up of two gratings performs as a two-dimensional non-spatial filtering. This paper reports that the volume Bragg gratings are fabricated by interfering two collimated coherent laser beams in photopolymer. Diffraction efficiency of a single grating is up to 78% in Bragg＇s condition, then a two-dimensional non-spatial filter, which consists of two volume Bragg gratings and a half-wave plate, enables the laser beam filtered in two dimensions with the diffraction efficiency of 54%. The Bragg＇s condition and effect of polarisation on performances of the two-dimension filter are also discussed.
基金Supported by The National Science & Technology Pillar Program during the Eleventh Five-year Plan Period, Grant No. 2006BAI05A01
文摘AIM:To investigate the spatial distribution patterns of anorectal atresia/stenosis in China.METHODS:Data were collected from the Chinese Birth Defects Monitoring Network(CBDMN),a hospital-based congenital malformations registry system.All fetuses more than 28 wk of gestation and neonates up to 7 d of age in hospitals within the monitoring sites of the CBDMN were monitored from 2001 to 2005.Two-dimensional graph-theoretical clustering was used to divide monitoring sites of the CBDMN into different clusters according to the average incidences of anorectal atresia/stenosis in the different monitoring sites.RESULTS:The overall average incidence of anorectal atresia/stenosis in China was 3.17 per 10000 from 2001 to 2005.The areas with the highest average incidences of anorectal atresia/stenosis were almost always focused in Eastern China.The monitoring sites were grouped into 6 clusters of areas.Cluster 1 comprised the monitoring sites in Heilongjiang Province,Jilin Province,and Liaoning Province;Cluster 2 was composed of those in Fujian Province,Guangdong Province,Hainan Province,Guangxi Zhuang Autonomous Region,south Hunan Province,and south Jiangxi Province;Cluster 3 consisted of those in Beijing Municipal City,Tianjin Municipal City,Hebei Province,Shandong Province,north Jiangsu Province,and north Anhui Province;Cluster 4 was made up of those in Zhejiang Province,Shanghai Municipal City,south Anhui Province,south Jiangsu Province,north Hunan Province,north Jiangxi Province,Hubei Province,Henan Province,Shanxi Province and Inner Mongolia Autonomous Region;Cluster 5 consisted of those in Ningxia Hui Autonomous Region,Gansu Province and Qinghai Province;and Cluster 6 included those in Shaanxi Province,Sichuan Province,Chongqing Municipal City,Yunnan Province,Guizhou Province,Xinjiang Uygur Autonomous Province and Tibet Autonomous Region.CONCLUSION:The fi ndings in this research allow the display of the spatial distribution patterns of anorectal atresia/stenosis in China.These will have important guiding significance for further analysis of relevant environmental factors regarding anorectal atresia/ stenosis and for achieving regional monitoring for anorectal atresia/stenosis.
基金the NSFC(No.12031006)and the Fundamental Research Funds for the Central Universities of China.
文摘In this work,we study the Cauchy problem of the spatially homogeneous Landau equation with hard potentials in a close-to-equilibrium framework.We prove that the solution to the Cauchy problem enjoys the analytic regularizing effect of the time variable with an L^(2)initial datum for positive time.So that the smoothing effect of the Cauchy problem for the spatially homogeneous Landau equation with hard potentials is exactly same as heat equation.
基金Project(51374155)supported by the National Natural Science Foundation of ChinaProject(2014BCB034)supported by the Hubei Province Key Technology R&D Program,ChinaProject(2014CFB796)supported by the Natural Science Foundation of Hubei Province of China
文摘In order to expand the application of the basic magnesium carbonate in the field of flame retardant,the plate-like basic magnesium carbonate(Mg5(CO3)4(OH)2.4H2O)was prepared successfully by template-mediated/homogeneous precipitation method,using magnesium chloride hexahydrate(MgCl2.6H2O)and urea(CO(NH2)2)as reaction materials.Phase and morphology of the product were characterized by X-ray diffraction(XRD),scanning electron microscope(SEM)and atomic force microscope(AFM),respectively.The results showed that well-crystallized plate-like Mg5(CO3)4(OH)2.4H2O can be prepared at the water bath temperature of 100°C,water bath time of 24 h,the aging time of 5 h after adding organic template agent.The investigation on organic template mediated mechanism shows that the template affects the crystal morphology by changing surface energy of different crystal plane.Through a preliminary study on the growth mechanism of the product,it is found that the generation of the plate-like Mg5(CO3)4(OH)2.4H2O could be explained by two-dimensional nucleation/step growth mechanism.
基金Supported by the China National Science and Technology Major Project(2017ZX05005-004-002,2016ZX05031-002-001)National Natural Science Foundation of China(41872138)Open Foundation of Top Disciplines in Yangtze University(2019KFJJ0818029)。
文摘An orthogonal 2D training image is constructed from the geological analysis results of well logs and sedimentary facies;the 2 D probabilities in three directions are obtained through linear pooling method and then aggregated by the logarithmic linear pooling to determine the 3 D multi-point pattern probabilities at the unknown points,to realize the reconstruction of a 3 D model from 2D cross-section.To solve the problems of reducing pattern variability in the 2 D training image and increasing sampling uncertainty,an adaptive spatial sampling method is introduced,and an iterative simulation strategy is adopted,in which sample points from the region with higher reliability of the previous simulation results are extracted to be additional condition points in the following simulation to improve the pattern probability sampling stability.The comparison of lateral accretion layer conceptual models shows that the reconstructing algorithm using self-adaptive spatial sampling can improve the accuracy of pattern sampling and rationality of spatial structure characteristics,and accurately reflect the morphology and distribution pattern of the lateral accretion layer.Application of the method in reconstructing the meandering river reservoir of the Cretaceous McMurray Formation in Canada shows that the new method can accurately reproduce the shape,spatial distribution pattern and development features of complex lateral accretion layers in the meandering river reservoir under tide effect.The test by sparse wells shows that the simulation accuracy is above 85%,and the coincidence rate of interpretation and prediction results of newly drilled horizontal wells is up to 80%.
基金supported by the Original Exploration Project of Natural Science Foundation of China(No.12150001)the National Key Research and Development Program of China(No.2018YFB1900400)+1 种基金the National Natural Science Foundation of China(No.11832019)the Nuclear Power Technology Innovation Center of Science Technology and Industry for National Defense of China(No.HDLCXZX-2021-HD-035)。
文摘The stress and the strain should be defined as statistical variables averaged over the representative volume elements for any real continuum system.It is shown that their nonlinear spatial distributions undermine the classical framework of solid mechanics and may cause non-ignorable errors to the solutions.With considering the high-order gradients of the stress and the strain,a two-step solution scheme is proposed to compensate for the influence.Through a revisit to three simple but typical problems,i.e.,the hole size-dependence of the fracture strength of perforated plates,the indentation depth-dependence of the measured elastic modulus by micro-indentation tests,and the tensile necking of metallic materials as well as hyperelastic materials,the effect of the nonlinear spatial distribution of stress and strain on solving these problems is illustrated.The observed size effect and the instability of deformation can be quantitatively explained if the effect is properly considered by the proposed method.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10847110)
文摘Various pattern evolutions are presented in one- and two-dimensional spatially coupled phase-conjugate systems （SCPCSs）. As the system parameters change, different patterns are obtained from the period-doubling of kink-antikinks in space to the spatiotemporal chaos in a one-dimensional SCPCS. The homogeneous symmetric states induce symmetry breaking from the four corners and the boundaries, finally leading to spatiotemporal chaos with the increase of the iteration time in a two-dimensional SCPCS. Numerical simulations are very helpful for understanding the complex optical phenomena.
文摘Multiple quantum well spatial light modulators with 128×128 array in 38μm pitch are fabricated using two pproaches, one with an attachment of an optical substrate and another one without. These two fabrication processes are described and compared.
